Synthetic strategies for nonporous organosilica nanoparticles from organosilanes

Organosilica nanoparticles refer to silica nanoparticles containing carbon along with organic or functional groups and can be divided into mesoporous organosilica nanoparticles and nonporous organosilica nanoparticles. During the past few decades, considerable efforts have been devoted to the development of organosilica nanoparticles directly from organosilanes. However, most of the reports have focused on mesoporous organosilica nanoparticles, while relatively few are concerned with nonporous organosilica nanoparticles. The synthesis of nonporous organosilica nanoparticles typically involves (i) self-condensation of an organosilane as the single source, (ii) co-condensation of two or more types of organosilanes, (iii) co-condensation of tetraalkoxysilane and an organosilane, and (iv) spontaneous emulsification and the subsequent radical polymerization of 3-(trimethoxysilyl)propyl methacrylate (TPM). This article aims to provide a review on the synthetic strategies of this important type of colloidal particle, followed by a brief discussion on their applications and future perspectives.

A chrome-free combination tanning strategy: based on silicic acid and plant tannin

Abstract

Silicic acid, commonly derived from cheap and easily available sodium silicate, has recently received great attention for application in leather industry to produce ecological leather with a cleaner approach. However, leather tanned with silicic acid alone is poor in storage stability, which limits its practical application in leather production. In this work, a new environment-friendly combination tannage based on silicic acid and plant tannin was developed to address this issue along with improving the comprehensive performances of leather. The obtained leather was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and so on. The results showed that compared with leather tanned with silicic acid alone, the leather tanned with this combination method possessed improved thermal stability, enhanced mechanical properties, acceptable softness, appropriate hydrophilicity, and especially enhanced storage stability. More importantly, the combination tanned leather with 1:1 of the mass ratio of silicic acid to vegetable tannin (composed of valonea extract and mimosa extract with the same weight) had more prominent comprehensive performances. In addition, the results demonstrated that hydrogen bonding played an important role in the combination tanning process. Furthermore, the hydrogen bonds generated between phenolic hydroxyl groups of polyphenols with silicon hydroxyl groups of silicic acid molecules inhibited the excessive condensation of Si-OH groups between themselves. Subsequently, the assessment of environmental impact revealed the value of BOD5/COD of the wastewater produced in this combination tanning process is more than 0.3, indicating the chrome-free combination tannage based on silicic acid and plant tannin was an environment-friendly tanning technology. These findings therefore indicated that a new chrome-free tanning method with silicon and biomass materials as main tanning agents has potential practical application prospect in leather production.

Graphical abstract

Surface functionalized mesoporous silica nanoparticles for intravitreal application of tacrolimus

Tacrolimus (TAC), a potent immunosuppressive macrolide, has been investigated for ocular diseases due to promising results in the treatment of anterior and posterior segments eye diseases. Mesoporous and functionalized silica nanoparticles show potential as TAC delivery platforms owing to their interesting characteristic as large surface area, uniform pore size distribution, high pore volume, and excellent biocompatibility. The purpose of this study was to incorporate TAC in functionalized silica nanoparticles with 3-aminopropyltriethoxysilane (MSNAPTES) and investigate the safety and biocompatibility of the systems. The MSNAPTES and MSNAPTES TAC nanoparticles were characterized. The in vitro cytotoxicity of MSNAPTES and MSNAPTES load with TAC (MSNAPTES-TAC) in retinal pigment epithelial cells (ARPE-19) was determined, chorioallantoic membrane (CAM) assay model was used to investigate the in vivo biocompatibility, and safety of intravitreal injection was evaluated using clinical examination (assessment of intraocular pressure and indirect fundus ophthalmoscopy), electroretinographic (ERG) and histologic studies in rats' eyes. The elemental analysis (CHN), thermogravimetric (TGA), photon correlation spectroscopy and Fourier transform infrared (FTIR) analysis confirmed the presence of functionalized agent and TAC in the MSNAPTES nanoparticles. TAC loading was estimated at 7% for the MSNAPTES TAC nanoparticles. MSNAPTES and MSNAPTES TAC did not present in vitro cytotoxicity. The drug delivery systems showed good biocompatibility on CAM. No retinal abnormalities, vitreous hemorrhage, neovascularization, retinal detachment, and optic nerve atrophy were observed during the in vivo study. Follow-up ERGs showed no changes in the function of the retina cells after 15 days of intravitreal injection, and histopathologic observations support these findings. In conclusion, MSNAPTES TAC was successfully synthesized, and physicochemical analyses confirmed the presence of TAC in the nanoparticles. In vitro and in vivo studies indicated that MSNAPTES TAC was safe to intravitreal administration. Taking into account the enormous potential of MSNAPTES to carry TAC, this platform could be a promising strategy for TAC ocular drug delivery in the treatment of eye diseases.

One-step synthesis of golf ball-like thiol-functionalized silica particles

There is increasing interest in the synthesis of golf ball-like particles. Most of the reports on golf ball-like particles have focused on polymer particles, while relatively few are concerned with inorganic particles. In this work, golf ball-like thiol-functionalized silica particles were synthesized for the first time by a one-step sol-gel reaction using 3-mercaptopropyl trimethoxysilane (MPTMS) and tetraethoxysilane (TEOS) as the precursors. The particle growth with time was monitored by SEM and a particle formation mechanism was proposed. The effects of different reaction parameters including the TEOS/MPTMS molar ratio, the NH4OH concentration, and the stirring rate on the morphology and size of the golf ball-like organosilica particles were studied. Given that the thiol groups have versatile functionalities, golf ball-like thiol-functionalized silica particle is a useful model for academic studies.

Protection of normal cells from irradiation bystander effects by silica-flufenamic acid nanoparticles

The development of a myriad of nanoparticles types has opened new possibilities for the diagnostics and treatment of many diseases, especially for cancer. However, most of the researches done so far do not focus on the protection of normal cells surrounding a tumor from irradiation bystander effects that might lead to cancer recurrence. Gap-junctions are known to be involved in this process, which leads to genomic instability of neighboring normal cells, and flufenamic acid (FFA) is included in a new group of gap-junction blockers recently discovered. The present work explores the use of mesoporous silica nanoparticles MCM-41 functionalized with 3-Aminopropyltriethoxysilane (APTES) for anchoring the flufenamic acid for its prolonged and controlled release and protection from radiation bystander effects. MCM-41 and functionalized samples were structurally and chemically characterized with multiple techniques. The biocompatibility of all samples was tested in a live/dead assay performed in cultured MRC-5 and HeLa cells. HeLa cells cultured were exposed to 50 Gy of gamma-rays and the media transferred to fibroblast cells cultured separately. Our results show that MCM-41 and functionalized samples have high biocompatibility with MCR-5 and HeLa cells, and most importantly, the FFA delivered by these NPs was able to halt apoptosis, one of main bystander effects.

Silica-based hierarchical porous Janus microcapsules: construction and support of Au nano-particle catalyst inside

A facile and novel method was developed to fabricate silica-based hierarchical porous Janus microcapsules (HPJMs SiO₂) for catalysis.

A Vesicle Supra-Assembly Approach to Synthesize Amine-Functionalized Hollow Dendritic Mesoporous Silica Nanospheres for Protein Delivery

Intracellular delivery of proteins is a promising strategy of intervention in disease, which relies heavily on the development of efficient delivery platforms due to the cell membrane impermeability of native proteins, particularly for negatively charged large proteins. This work reports a vesicle supra-assembly approach to synthesize novel amine-functionalized hollow dendritic mesoporous silica nanospheres (A-HDMSN). An amine silica source is introduced into a water-oil reaction solution prior to the addition of conventional silica source tetraethylorthosilicate. This strategy favors the formation of composite vesicles as the building blocks which further assemble into the final product. The obtained A-HDMSN have a cavity core of ≈170 nm, large dendritic mesopores of 20.7 nm in the shell and high pore volume of 2.67 cm³ g^-1 . Compared to the calcined counterpart without amine groups (C-HDMSN), A-HDMSN possess enhanced loading capacity to large negative proteins (IgG and β-galactosidase) and improved cellular uptake performance, contributed by the cationic groups. A-HDMSN enhance the intracellular uptake of β-galactosidase by up to 5-fold and 40-fold compared to C-HDMSN and free β-galactosidase, respectively. The active form of β-galactosidase delivered by A-HDMSN retains its intracellular catalytic functions.

Tuning the Nanostructure of Highly Functionalized Silica Using Amphiphilic Organosilanes: Curvature Agent Effects

The self-assembly of amino-undecyl-triethoxysilane (AUT) as micelles in water is considered. The behavior of acid/AUT systems is governed by a complete proton transfer from the acid to the amine, leading to the formation of an ammonium headgroup. This moiety is responsible for the bending of the interface between the organic core of the micelles and the surrounding water. By playing with the size of the acid used as curvature agent, the amphiphilic behavior of the organosilane molecule may be adjusted. We follow the aggregation as the curvature agent size increases. This approach constitutes an efficient and original method in order to tune the nanostructure of highly functionalized silica at the early stage of the elaboration. Small-angle X-ray scattering, wet scanning transmission electron microscopy, dynamic light scattering, and complementary characterization techniques indicate that hybrid organic-inorganic planar objects and vesicles are obtained for smaller curvature agents. Increasing the size of the curvature agent results in a transition of the aggregation geometry from vesicles to cylindrical direct micelles, finally leading to nanofibers organized in a 2D hexagonal network resembling a "reverse MCM-41 structure". A geometrical molecular self-assembly model is finally proposed, considering the dimensions of the surfactant tail and those of the head groups.

Toward Scalable Fabrication of Hierarchical Silica Capsules with Integrated Micro-, Meso-, and Macropores

Hierarchical porous structures are ubiquitous in biological organisms and inorganic systems. Although such structures have been replicated, designed, and fabricated, they are often inferior to naturally occurring analogues. Apart from the complexity and multiple functionalities developed by the biological systems, the controllable and scalable production of hierarchically porous structures and building blocks remains a technological challenge. Herein, a facile and scalable approach is developed to fabricate hierarchical hollow spheres with integrated micro-, meso-, and macropores ranging from 1 nm to 100 μm (spanning five orders of magnitude). (Macro)molecules, micro-rods (which play a key role for the creation of robust capsules), and emulsion droplets have been successfully employed as multiple length scale templates, allowing the creation of hierarchical porous macrospheres. Thanks to their specific mechanical strength, these hierarchical porous spheres could be incorporated and assembled as higher level building blocks in various novel materials.

Synthesis of novel TiO2/BiOCl@HHSS composites and its photocatalytic activity enhancement under simulated sunlight

A novel TiO₂/BiOCl@HHSS photocatalyst has been successfully prepared by a facile one-pot method. Due to with special hollow structure, high surface area, and heterostructure, which ultimately makes the TiO₂/BiOCl@HHSS has high photocatalytic activity under simulated sunlight.

Multi-template synthesis of hierarchically porous carbon spheres with potential application in supercapacitors

Hierarchical porous carbon spheres with tuneable pore sizes were successfully fabricated by simply templating hierarchical silica capsules and triblock copolymer.

Facile preparation of bridged silsesquioxane microspheres with interconnected multi-cavities and open holes

Bridged silsesquioxane (BSQ) microspheres featured with interconnected multi-cavities and open holes are facilely prepared from water-in-oil-in-water emulsion.

Construction of Grape-like Silica-Based Hierarchical Porous Interlocked Microcapsules by Colloidal Crystals Templates

We present a facile strategy to prepare grape-like silica-based hierarchical porous interlocked microcapsules (HPIMs) by polystyrene colloidal crystals templates, whose structure is the subtle integration of open mouthed structure, hierarchical porous nanostructure and interlocked architecture. HPIMs are fabricated by replicating colloidal crystals templates that have a hexagonal close-packed structure; thus, theoretically, each microcapsule has 12 open mouths, and these open mouths with mesoporous microcapsule wall construct the hierarchical porous structure. Furthermore, the interlocked architecture of the microcapsules can endow HPIMs with excellent mechanical stability and recyclability. By adjusting sulfonation time, the morphology, shell thickness, and even mesporous size of the HPIMs can be precisely controlled. In addition, HPIMs with various compositions are obtained via this method, such as silica and aminopropyl polysilsesquioxane (APSQ). All these unique features derived from a readily available method will give products with a broader range of applications.

One-step synthesis of amine-functionalized hollow mesoporous silica nanoparticles as efficient antibacterial and anticancer materials

In this study, amine-functionalized hollow mesoporous silica nanoparticles with an average diameter of ∼100 nm and shell thickness of ∼20 nm were prepared by an one-step process. This new nanoparticulate system exhibited excellent killing efficiency against mycobacterial (M. smegmatis strain mc(2) 651) and cancer cells (A549).

Adsorptions of Cd(ii) and methylene blue from aqueous solution by silica hybrid hollow spheres

Silica hybrid hollow spheres prepared via one step method can be used as adsorbents for Cd(ii) and methylene blue.