Auricular cartilage regeneration using chondroitin sulfate-based hydrogel with mesenchymal stem cells in rabbits

BACKGROUND

Cartilage is an avascular and alymphatic tissue that lacks the intrinsic ability to undergo spontaneous repair and regeneration in the event of significant injury. The efficacy of conventional therapies for invasive cartilage injuries is limited, thereby prompting the emergence of cartilage tissue engineering as a possible alternative. In this study, we fabricated three-dimensional hydrogel films utilizing sodium alginate (SA), gelatin (Gel), and chondroitin sulfate (CS). These films were included with Wharton's jelly mesenchymal stem cells (WJ-MSCs) and intended for cartilage tissue regeneration.

METHODS

The hydrogel film that were prepared underwent evaluation using various techniques including scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, assessment of the degree of swelling, degradation analysis, determination of water vapor transmission rate (WVTR), measurement of water contact angle (WCA), evaluation of mechanical strength, and assessment of biocompatibility. The rabbit ear cartilage regeneration by hydrogel films with and without of WJ-MSCs was studied by histopathological investigations during 15, 30, and 60 days.

RESULTS

The hydrogel films containing CS exhibited superior metrics compared to other nanocomposites such as better mechanical strength (12.87 MPa in SA/Gel compared to 15.56 in SA/Gel/CS), stability, hydrophilicity, WVTR (3103.33 g/m2/day in SA/Gel compared to 2646.67 in nanocomposites containing CS), and swelling ratio (6.97 to 12.11% in SA/Gel composite compared to 5.03 to 10.90% in SA/Gel/CS). Histopathological studies showed the presence of chondrocyte cells in the lacunae on the 30th day and the complete restoration of the cartilage tissue on the 60th day following the injury in the group of SA/Gel/CS hydrogel containing WJ-MSCs.

CONCLUSIONS

We successfully fabricated a scaffold composed of alginate, gelatin, and chondroitin sulfate. This scaffold was further enhanced by the incorporation of Wharton's jelly mesenchymal stem cells. Our findings demonstrate that this composite scaffold has remarkable biocompatibility and mechanical characteristics. The present study successfully demonstrated the therapeutic potential of the SA-Gel-CS hydrogel containing WJ-MSCs for cartilage regeneration in rabbits.

A review of advanced hydrogels for cartilage tissue engineering

With the increase in weight and age of the population, the consumption of tobacco, inappropriate foods, and the reduction of sports activities in recent years, bone and joint diseases such as osteoarthritis (OA) have become more common in the world. From the past until now, various treatment strategies (e.g., microfracture treatment, Autologous Chondrocyte Implantation (ACI), and Mosaicplasty) have been investigated and studied for the prevention and treatment of this disease. However, these methods face problems such as being invasive, not fully repairing the tissue, and damaging the surrounding tissues. Tissue engineering, including cartilage tissue engineering, is one of the minimally invasive, innovative, and effective methods for the treatment and regeneration of damaged cartilage, which has attracted the attention of scientists in the fields of medicine and biomaterials engineering in the past several years. Hydrogels of different types with diverse properties have become desirable candidates for engineering and treating cartilage tissue. They can cover most of the shortcomings of other treatment methods and cause the least secondary damage to the patient. Besides using hydrogels as an ideal strategy, new drug delivery and treatment methods, such as targeted drug delivery and treatment through mechanical signaling, have been studied as interesting strategies. In this study, we review and discuss various types of hydrogels, biomaterials used for hydrogel manufacturing, cartilage-targeting drug delivery, and mechanosignaling as modern strategies for cartilage treatment.

Investigating the Interplay Between Matrix Compliance and Passaging History on Chondrogenic Differentiation of Mesenchymal Stem Cells Encapsulated Within Alginate-Gelatin Hybrid Hydrogels

Mesenchymal stem cells (MSCs) are used widely in tissue engineering and regenerative medicine because of their ease of isolation and their pluripotency. The low survival and retention rate of MSCs at the target site upon implantation can be addressed via encapsulation within hydrogels capable of directing their fate. In this study, the interplay between matrix mechanics and the passage number of MSCs on their chondrogenic differentiation was assessed. Human bone marrow-derived MSCs between passages 4 and 6 were encapsulated within alginate-gelatin hybrid gels. The stiffness of the gels was varied by varying alginate concentrations while maintaining the concentration of gelatin and consequently, the cell adhesion sites, constant. The study revealed that within 4.8 kPa gels, GAG deposition was higher by P4 MSCs compared to P6 MSCs. However, an opposite trend was observed with collagen type 2 deposition. Further, we observed enhanced chondrogenic differentiation upon encapsulation of MSCs within 6.7 kPa hydrogel irrespective of passaging history. However, the effect of matrix compliance was more prominent in the case of higher passaged MSCs suggesting that matrix stiffness can help rescue the reduced differentiation capability of these cells.

Gelatin-Based Hybrid Hydrogel Scaffolds: Toward Physicochemical Liver Mimicry

There exists a clear need to develop novel materials that could serve liver tissue engineering purposes. Those materials need to be researched for the development of bioengineered liver tissue as an alternative to donor livers, as well as for materials that could be applied for scaffolds to develop an in vitro model for drug-induced liver injury (DILI) detection . In this paper, the hydrogels oxidized dextran-gelatin (Dexox-Gel) and norbornene-modified dextran-thiolated gelatin (DexNB-GelSH) were developed, and their feasibility toward processing via indirect 3D-printing was investigated with the aim to develop hydrogel scaffolds that physicochemically mimic native liver tissue. Furthermore, their in vitro biocompatibility was assessed using preliminary biological tests using HepG2 cells. Both materials were thoroughly physicochemically characterized and benchmarked to the methacrylated gelatin (GelMA) reference material. Due to inferior properties, Dexox-gel was not further processed into 3D-hydrogel scaffolds. This research revealed that DexNB-GelSH exhibited physicochemical properties that were in excellent agreement with the properties of natural liver tissue in contrast to GelMA. In combination with an equally good biological evaluation of DexNB-GelSH in comparison with GelMA based on an MTS proliferation assay and an albumin quantification assay, DexNB-GelSH can be considered promising in the field of liver tissue engineering.

Poly(ethylene oxide)/Gelatin-Based Biphasic Photocrosslinkable Hydrogels of Tunable Morphology for Hepatic Progenitor Cell Encapsulation

Macroporous hydrogels have great potential for biomedical applications. Liquid or gel-like pores were created in a photopolymerizable hydrogel by forming water-in-water emulsions upon mixing aqueous solutions of gelatin and a poly(ethylene oxide) (PEO)-based triblock copolymer. The copolymer constituted the continuous matrix, which dominated the mechanical properties of the hydrogel once photopolymerized. The gelatin constituted the dispersed phase, which created macropores in the hydrogel. The microstructures of the porous hydrogel were determined by the volume fraction of the gelatin phase. When volume fractions were close to 50 v%, free-standing hydrogels with interpenetrated morphology can be obtained thanks to the addition of a small amount of xanthan. The hydrogels displayed Young's moduli ranging from 5 to 30 kPa. They have been found to be non-swellable and non-degradable in physiological conditions. Preliminary viability tests with hepatic progenitor cells embedded in monophasic PEO-based hydrogels showed rapid mortality of the cells, whereas encouraging viability was observed in PEO-based triblock copolymer/gelatin macroporous hydrogels. The latter has the potential to be used in cell therapy.

Osteogenesis of Iron Oxide Nanoparticles-Labeled Human Precartilaginous Stem Cells in Interpenetrating Network Printable Hydrogel

Smart biomaterials combined with stem cell-based therapeutic strategies have brought innovation in the field of bone tissue regeneration. However, little is known about precartilaginous stem cells (PCSCs), which can be used as seed cells and incorporated with bioactive scaffolds for reconstructive tissue therapy of bone defects. Herein, iron oxide nanoparticles (IONPs) were employed to modulate the fate of PCSCs, resulting in the enhanced osteogenic differentiation potential both in vitro and in vivo. PCSCs were isolated from the ring of La-Croix extracted from polydactylism patient and identified through immunohistochemically staining using anti-FGFR-3 antibodies. Potential toxicity of IONPs toward PCSCs was assessed through cell viability, proliferation, and attachment assay, and the results demonstrated that IONPs exhibited excellent biocompatibility. After that, the effects of IONPs on osteogenic differentiation of PCSCs were evaluated and enhanced ALP activity, formation of mineralized nodule, and osteogenic-related genes expressions could be observed upon IONPs treatment. Moreover, in vivo bone regeneration assessment was performed using rabbit femur defects as a model. A novel methacrylated alginate and 4-arm poly (ethylene glycol)-acrylate (4A-PEGAcr)-based interpenetrating polymeric printable network (IPN) hydrogel was prepared for incorporation of IONPs-labeled PCSCs, where 4A-PEGAcr was the common component for three-dimensional (3D) printing. The implantation of IONPs-labeled PCSCs significantly accelerated the bone formation process, indicating that IONPs-labeled PCSCs could endow current scaffolds with excellent osteogenic ability. Together with the fact that the IONPs-labeled PCSCs-incorporated IPN hydrogel (PCSCs-hydrogels) was biosafety and printable, we believed that PCSCs-hydrogels with enhanced osteogenic bioactivity could enrich the stem cell-based therapeutic strategies for bone tissue regeneration.

Vascularized nanocomposite hydrogel mechanically reinforced by polyelectrolyt-modified nanoparticles

Vascularization plays an important role in the initial stage of triggering the bone defects repair. The combination of bioactive small molecule drugs and biomaterials has been a powerful strategy for...

Evaluation of injectable nucleus augmentation materials for the treatment of intervertebral disc degeneration

Back pain affects a person's health and mobility as well as being associated with large health and social costs. Lower back pain is frequently caused by degeneration of the intervertebral disc. Current operative and non-operative treatments are often ineffective and expensive. Nucleus augmentation is designed to be a minimally invasive method of restoring the disc to its native healthy state by restoring the disc height, and mechanical and/or biological properties. The majority of the candidate materials for nucleus augmentation are injectable hydrogels. In this review, we examine the materials that are currently under investigation for nucleus augmentation, and compare their ability to meet the design requirements for this application. Specifically, the delivery of the material into the disc, the mechanical properties of the material and the biological compatibility are examined. Recommendations for future testing are also made.

Designing Hydrogels for 3D Cell Culture Using Dynamic Covalent Crosslinking

Designing simple biomaterials to replicate the biochemical and mechanical properties of tissues is an ongoing challenge in tissue engineering. For several decades, new biomaterials have been engineered using cytocompatible chemical reactions and spontaneous ligations via click chemistries to generate scaffolds and water swollen polymer networks, known as hydrogels, with tunable properties. However, most of these materials are static in nature, providing only macroscopic tunability of the scaffold mechanics, and do not reflect the dynamic environment of natural extracellular microenvironment. For more complex applications such as organoids or co-culture systems, there remain opportunities to investigate cells that locally remodel and change the physicochemical properties within the matrices. In this review, advanced biomaterials where dynamic covalent chemistry is used to produce stable 3D cell culture models and high-resolution constructs for both in vitro and in vivo applications, are discussed. The implications of dynamic covalent chemistry on viscoelastic properties of in vitro models are summarized, case studies in 3D cell culture are critically analyzed, and opportunities to further improve the performance of biomaterials for 3D tissue engineering are discussed.

Recent advances of hydrogel-based biomaterials for intervertebral disc tissue treatment: A literature review

Low back pain is an increasingly prevalent symptom mainly associated with intervertebral disc (IVD) degeneration. It is highly correlated with aging, as the nucleus pulposus (NP) dehydrates and annulus fibrosus fissure formatting, which finally results in the IVD herniation and related clinical symptoms. Hydrogels have been drawing increasing attention as the ideal candidates for IVD degeneration because of their unique properties such as biocompatibility, highly tunable mechanical properties, and especially the water absorption and retention ability resembling the normal NP tissue. Numerous innovative hydrogel polymers have been generated in the most recent years. This review article will first briefly describe the anatomy and pathophysiology of IVDs and current therapies with their limitations. Following that, the article introduces the hydrogel materials in the classification of their origins. Next, it reviews the recent hydrogel polymers explored for IVD regeneration and analyses what efforts have been made to overcome the existing limitations. Finally, the challenges and prospects of hydrogel-based treatments for IVD tissue are also discussed. We believe that these novel hydrogel-based strategies may shed light on new possibilities in IVD degeneration disease.

White-light-emitting hydrogels with self-healing properties and adjustable emission colors

White-light-emitting soft materials with self-healing properties show extensive applications in many fields. Herein, a novel self-healing hydrogel is successfully fabricated using oxidized dextran (Odex) and dithiodipropionate dihydrazide (TPH). Carbon dots (CDs), Riboflavin (Ri) and Rhodamine B (RhB) are incorporated into the gel matrix to produce white light emission through fluorescence resonance energy transfer (FRET) process, thus achieving excellent Commission Internationale de L'eclairage (CIE) coordinate value of (0.30, 0.33). The emission colors can be easily tuned via changing proportions of three emitters or the excitation wavelength. When the hydrogels are coated on an ultraviolet light-emitting diodes (UV LED), the hydrogel coating converts UV light to white light and repairs itself in 20 h while a hole is dug from it. Thanks to reversible exchanging reactions of acylhydrazone and disulfide bonds in hydrogel networks, the hydrogel coating exhibits perfect self-healing property in a wide range of pH (from 5 to 9 except for 7). The excellent emission and self-healing properties of hydrogels have great value in practical applications.

Modular Orthopaedic Tissue Engineering With Implantable Microcarriers and Canine Adipose-Derived Mesenchymal Stromal Cells

Mesenchymal stromal cells (MSC) hold significant potential for tissue engineering applications. Modular tissue engineering involves the use of cellularized "building blocks" that can be assembled via a bottom-up approach into larger tissue-like constructs. This approach emulates more closely the complexity associated hierarchical tissues compared with conventional top-down tissue engineering strategies. The current study describes the combination of biodegradable porous poly(DL-lactide-co-glycolide) (PLGA) TIPS microcarriers with canine adipose-derived MSC (cAdMSC) for use as implantable conformable building blocks in modular tissue engineering applications. Optimal conditions were identified for the attachment and proliferation of cAdMSC on the surface of the microcarriers. Culture of the cellularized microcarriers for 21 days in transwell insert plates under conditions used to induce either chondrogenic or osteogenic differentiation resulted in self-assembly of solid 3D tissue constructs. The tissue constructs exhibited phenotypic characteristics indicative of successful osteogenic or chondrogenic differentiation, as well as viscoelastic mechanical properties. This strategy paves the way to create in situ tissue engineered constructs via modular tissue engineering for therapeutic applications.

Chemo-Photothermal Combination Cancer Therapy with ROS Scavenging, Extracellular Matrix Depletion, and Tumor Immune Activation by Telmisartan and Diselenide-Paclitaxel Prodrug Loaded Nanoparticles

Extracellular matrix (ECM) accumulating in the tumor microenvironment (TME) is generated by tumor-associated fibroblasts. It can elevate interstitial fluid pressure and form dense barriers in tumor tissues. Consequently, nanocarriers are hindered from permeating into deeper tumor sites. Thus, the programmed drug-releasing nanoparticles, G(TM)PPSP, were developed for TME remodeling and breast cancer therapy. Gelatin nanoparticles were linked with platinum nanoparticles (PtNPs) to obtain G(TM)PPSP with a size of 214.0 ± 5.0 nm. Telmisartan (TM) was loaded in gelatin nanoparticles. Paclitaxel (PTX) was attached to PtNPs via a dual redox responsive diselenide bond. TM release was mediated by MMP-2 because of gelatin degradation in TME, and then intracellular PTX was released because of diselenide linkage fracture triggered by ROS or glutathione. ECM was depleted owing to TGF-β downregulation by TM and direct ablation by the photothermal effect of PtNPs. 4T1 tumor progression was inhibited by PTX chemotherapy, intracellular ROS scavenging of PtNPs, and photothermal therapy (PTT). The tumor spheroid penetration assay proved G(TM)PPSP could permeate into deep tumor regions when MMP-2 existed. In vivo antitumor experiments implied G(TM)PPSP with PTT could inhibit tumor growth effectively and remodel TME via ECM depletion and immunity activation, indicating the potential of G(TM)PPSP-based chemo-photothermal combination therapy for breast cancer treatment.

Injectable Functional Biomaterials for Minimally Invasive Surgery

Injectable materials represent very attractive ready-to-use biomaterials for application in minimally invasive surgical procedures. It is shown that this approach to treat, for example, vertebral fracture, craniofacial defects, or tumor resection has significant clinical potential in the biomedical field. In the last four decades, calcium phosphate cements have been widely used as injectable materials for orthopedic surgery due to their excellent properties in terms of biocompatibility and osteoconductivity. However, few clinical studies have demonstrated certain weaknesses of these cements, which include high viscosity, long degradation time, and difficulties being manipulated. To overcome these limitations, the use of sol-gel technology has been investigated, which has shown good results for synthesis of injectable calcium phosphate-based materials. In the last few decades, injectable hydrogels have gained increasing attention owing to their structural similarities with the extracellular matrix, easy process conditions, and potential applications in minimally invasive surgery. However, the need to protect cells during injection leads to the development of double network injectable hydrogels that are capable of being cross-linked in situ. This review will provide the current state of the art and recent advances in the field of injectable biomaterials for minimally invasive surgery.

Natural hydrogels for cartilage regeneration: Modification, preparation and application

Hydrogels, consisting of hydrophilic polymers, can be used as films, scaffolds, nanoparticles and drug carriers. They are one of the hot research topics in material science and tissue engineering and are widely used in the field of biomedical and biological sciences. Researchers are seeking for a type of material that is similar to human tissues and can partially replace human tissues or organs. The hydrogel has brought possibility to solve this problem. It has good biocompatibility and biodegradability. After entering the body, it does not cause immune and toxic reactions. The degradation time can be controlled, and the degradation products are nontoxic and nonimmunogenic; the final metabolites can be excreted outside the body. Owing to the lack of blood vessels and poor migration ability of chondrocytes, the self-healing ability of damaged cartilage is limited. Tissue engineering has brought a new direction for the regeneration of cartilage. Drug carriers and scaffolds made of hydrogels are widely used in cartilage tissue engineering. The present review introduces the natural hydrogels, which are often used for cartilage tissue engineering with respect to synthesis, modification and application methods.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

This review introduces the natural hydrogels that are often used in cartilage tissue engineering with respect to synthesis, modification and application methods. Furthermore, the essential concepts and recent discoveries were demonstrated to illustrate the achievable goals and the current limitations. In addition, we propose the putative challenges and directions for the use of natural hydrogels in cartilage regeneration.

Close-loop dynamic nanohybrids on collagen-ark with in situ gelling transformation capability for biomimetic stage-specific diabetic wound healing

A self-regulated dynamic nanohybrid that can sensitively respond to hyperglycemic microenvironment is developed. The nanohybrid with a core/shell structure is produced through a single-step microfluidics nanoprecipitation method, where drugs-loaded porous silicon (PSi) nanoparticles are encapsulated by H₂O₂ responsive polymeric matrix.

Biopolymeric In Situ Hydrogels for Tissue Engineering and Bioimaging Applications

BACKGROUND

Biopolymeric in situ hydrogels play a crucial role in the regenerative repair and replacement of infected or injured tissue. They possess excellent biodegradability and biocompatibility in the biological system, however only a few biopolymeric in situ hydrogels have been approved clinically. Researchers have been investigating new advancements and designs to restore tissue functions and structure, and these studies involve a composite of biometrics, cells and a combination of factors that can repair or regenerate damaged tissue.

METHODS

Injectable hydrogels, cross-linking mechanisms, bioactive materials for injectable hydrogels, clinically applied injectable biopolymeric hydrogels and the bioimaging applications of hydrogels were reviewed.

RESULTS

This article reviews the different types of biopolymeric injectable hydrogels, their gelation mechanisms, tissue engineering, clinical applications and their various in situ imaging techniques.

CONCLUSION

The applications of bioactive injectable hydrogels and their bioimaging are a promising area in tissue engineering and regenerative medicine. There is a high demand for injectable hydrogels for in situ imaging.

Injectable hydrogels: a new paradigm for osteochondral tissue engineering

Osteochondral tissue engineering has become a promising strategy for repairing focal chondral lesions and early osteoarthritis (OA), which account for progressive joint pain and disability in millions of people worldwide. Towards improving osteochondral tissue repair, injectable hydrogels have emerged as promising matrices due to their wider range of properties such as their high water content and porous framework, similarity to the natural extracellular matrix (ECM), ability to encapsulate cells within the matrix and ability to provide biological cues for cellular differentiation. Further, their properties such as those that facilitate minimally invasive deployment or delivery, and their ability to repair geometrically complex irregular defects have been critical for their success. In this review, we provide an overview of innovative approaches to engineer injectable hydrogels towards improved osteochondral tissue repair. Herein, we focus on understanding the biology of osteochondral tissue and osteoarthritis along with the need for injectable hydrogels in osteochondral tissue engineering. Furthermore, we discuss in detail different biomaterials (natural and synthetic) and various advanced fabrication methods being employed for the development of injectable hydrogels in osteochondral repair. In addition, in vitro and in vivo applications of developed injectable hydrogels for osteochondral tissue engineering are also reviewed. Finally, conclusions and future perspectives of using injectable hydrogels in osteochondral tissue engineering are provided.

A simple Schiff base as dual-responsive fluorescent sensor for bioimaging recognition of Zn2+ and Al3+ in living cells

A simple Schiff base fluorescent sensor (BDNOL) was synthesized from the reaction of picolinohydrazide and 4-(diethylamino)salicylaldehyde, and developed for selective detection of Al³⁺ and Zn²⁺. This non-fluorescent sensor displayed obvious fluorescence enhancement after binding to Al³⁺/Zn²⁺ ions with high sensitivity and selectivity, accompanied by obvious fluorescence emission enhancement (504 nm for Al³⁺ and 575 nm for Zn²⁺). The detection limits were found to be 8.30 × 10^-8 M for Al³⁺ and 1.24 × 10^-7 M for Zn²⁺. The binding mechanisms between BDNOL and Al³⁺/Zn²⁺ ions were supported by ¹H NMR and HR-MS analysis, and a density functional theory (DFT) study. The sensing behavior was also studied with molecular logic functions of OR, AND, and NOT gates. Furthermore, the fluorescent sensor was successfully used to recognize Al³⁺ and Zn²⁺ in living cells, suggesting that this simple biosensor has great potential in biological imaging applications.

Low Magnitude of Compression Enhances Biosynthesis of Mesenchymal Stem Cells towards Nucleus Pulposus Cells via the TRPV4-Dependent Pathway

Mesenchymal stem cell- (MSC-) based therapy is regarded as a promising tissue engineering strategy to achieve nucleus pulposus (NP) regeneration for the treatment of intervertebral disc degeneration (IDD). However, it is still a challenge to promote the biosynthesis of MSC to meet the requirement of NP regeneration. The purpose of this study was to optimize the compressive magnitude to enhance the extracellular matrix (ECM) deposition towards discogenesis of MSCs. Thus, we constructed a 3D culture model for MSCs to bear different magnitudes of compression for 7 days (5%, 10%, and 20% at the frequency of 1.0 Hz for 8 hours/day) using an intelligent and mechanically active bioreactor. Then, the underlying mechanotransduction mechanism of transient receptor potential vanilloid 4 (TRPV4) was further explored. The MSC-encapsulated hybrids were evaluated by Live/Dead staining, biochemical content assay, real-time PCR, Western blot, histological, and immunohistochemical analysis. The results showed that low-magnitude compression promoted anabolic response where high-magnitude compression induced the catabolic response for the 3D-cultured MSCs. The anabolic effect of low-magnitude compression could be inhibited by inhibiting TRPV4. Meanwhile, the activation of TRPV4 enhanced the biosynthesis analogous to low-magnitude compression. These findings demonstrate that low-magnitude compression promoted the anabolic response of ECM deposition towards discogenesis for the 3D-cultured MSCs and the TRPV4 channel plays a key role on mechanical signal transduction for low-magnitude compressive loading. Further understanding of this mechanism may provide insights into the development of new therapies for MSC-based NP regeneration.

Injectable hydrogels for delivering biotherapeutic molecules

To date, numerous delivery systems based on either organic or inorganic material have been developed to achieve efficient and sustained delivery of therapeutics. Hydrogels, which are three dimensional networks of crosslinked hydrophilic polymers, have a significant role in solving the clinical and pharmacological limitations of present systems because of their biocompatibility, ease of preparation and unique physical properties such as a tunable porous nature and affinity for biological fluids. Development of an in situ forming injectable hydrogel system has allowed excellent spatial and temporal control, unlike systemically administered therapeutics. Injectable hydrogel systems can offset difficulties with conventional hydrogel-based drug delivery systems in the clinic by forming a drug/gene delivery or cell-growing depot in the body with a single injection, thereby enabling patient compliance and comfort. Carbohydrate polymers are widely used for the synthesis of injectable in situ-forming hydrogels because of ready availability, presence of modifiable functional groups, biocompatibility and other physiochemical properties. In this review, we discuss different aspects of injectable hydrogels, such as bulk hydrogels/macrogels, microgels, and nanogels derived from natural polymers, and their importance in the delivery of therapeutics such as genes, drugs, cells or other biomolecules and how these revolutionary systems can complement existing therapeutic delivery systems.

Atelocollagen-based Hydrogels Crosslinked with Oxidised Polysaccharides as Cell Encapsulation Matrix for Engineered Bioactive Stromal Tissue

Tissue stroma is responsible for extracellular matrix (ECM) formation and secretion of factors that coordinate the behaviour of the surrounding cells through the microenvironment created. It's inability to spontaneously regenerate makes it a good candidate for research studies such as testing various tissue engineered products capable of replacing the stroma in order to assure normal tissue regeneration and function. In this study, a bioactive stroma was obtained considering two main components: 1) the artificial ECM formed using atelocollagen-oxidized polysaccharides hydrogels in which the polysaccharide compound (oxidised gellan or pullulan) has the role of crosslinker and 2) encapsulated stromal cells (dermal fibroblasts, ovarian theca-interstitial and granulosa cells). The cell-hosting ability of the hydrogels is demonstrated by a good diffusion of globular proteins (albumin) while the fibrillar morphology proves to be optimal for cell adhesion. These structural properties and cytocompatibility of the components maintain good cell viability and cell encapsulation for more than 12 days. Nevertheless, the results indicate some differences favouring the gellan crosslinked hydrogels. Ovarian stromal cells functionality was maintained as indicated by hormone secretion, confirming cell-cell signalling in encapsulated and co-culture conditions. In vivo implantation shows the regenerative potential of the cell-populated hydrogels as they are integrated into the natural tissue. The possibility of cryopreserving the hydrogel-cell system, while maintaining both cell viability and hydrogel structural integrity underlines the potential of these ready-to-use hydrogels as bioactive stroma for multipurpose tissue regeneration.

Injectable hydrogels for cartilage and bone tissue engineering

Tissue engineering has become a promising strategy for repairing damaged cartilage and bone tissue. Among the scaffolds for tissue-engineering applications, injectable hydrogels have demonstrated great potential for use as three-dimensional cell culture scaffolds in cartilage and bone tissue engineering, owing to their high water content, similarity to the natural extracellular matrix (ECM), porous framework for cell transplantation and proliferation, minimal invasive properties, and ability to match irregular defects. In this review, we describe the selection of appropriate biomaterials and fabrication methods to prepare novel injectable hydrogels for cartilage and bone tissue engineering. In addition, the biology of cartilage and the bony ECM is also summarized. Finally, future perspectives for injectable hydrogels in cartilage and bone tissue engineering are discussed.

An interpenetrating network-strengthened and toughened hydrogel that supports cell-based nucleus pulposus regeneration

Hydrogel is a suitable scaffold for the nucleus pulposus (NP) regeneration. However, its unmatched mechanical properties lead to implant failure in late-stage disc degeneration because of structural failure and implant extrusion after long-term compression. In this study, we evaluated an interpenetrating network (IPN)-strengthened and toughened hydrogel for NP regeneration, using dextran and gelatin as the primary network while poly (ethylene glycol) as the secondary network. The aim of this study was to realize the NP regeneration using the hydrogel. To achieve this, we optimized its properties by adjusting the mass ratios of the secondary/primary networks and determining the best preparation conditions for NP regeneration in a series of biomechanical, cytocompatibility, tissue engineering, and in vivo study. We found the optimal formulation of the IPN hydrogel, at a secondary/primary network ratio of 1:4, exhibited high toughness (the compressive strain reached 86%). The encapsulated NP cells showed increasing proliferation, cell clustering and matrix deposition. Furthermore, the hydrogel could support long-term cell retention and survival in the rat IVDs. It facilitated rehydration and regeneration of porcine degenerative NPs. In conclusion, this study demonstrates the tough IPN hydrogel could be a promising candidate for functional disc regeneration in future.

One-step cross-linked injectable hydrogels with tunable properties for space-filling scaffolds in tissue engineering

One-step cross-linked injectable hydrogels are prepared through Schiff-based reaction with tunable properties for space-filling scaffolds.

Dynamic layer-by-layer films linked with Schiff base bond for sustained drug release

Reversible Schiff base bonds were used to construct dynamic layer-by-layer films. Sustained and intelligent drug release was achieved.

Synthesis and characterization of a novel hydrogel: salecan/polyacrylamide semi-IPN hydrogel with a desirable pore structure

Salecan is a novel water-soluble β-glucan produced by a salt-tolerant strain Agrobacterium sp. ZX09 which was isolated from a soil sample in our laboratory and the 16S rDNA sequence of this novel strain was deposited in the GenBank database under the accession number GU810841. Salecan has excellent physicochemical properties and can be used in industries such as food and medicine. In this paper, novel semi-interpenetrating polymer network (semi-IPN) hydrogels based on salecan and polyacrylamide (PAAm) were synthesized by radical polymerization/cryopolymerization and semi-IPN techniques. The resulting hydrogels with different salecan/PAAm composition ratios and preparation temperatures were characterized using FTIR, XRD, TGA and SEM measurements. The semi-IPNs exhibited a homogeneous porous architecture with a tunable pore size in a very broad range of 5-150 μm. Furthermore, swelling behaviors of the hydrogels were also studied to investigate the response properties of the hydrogels. The hydrogels obtained at subzero temperature can attain the equilibrium state in water within 260 seconds. Mechanical measurements showed that all semi-IPNs possessed good mechanical properties. In vitro degradation was also studied in PBS solution. Cytotoxicity results suggested that semi-IPN hydrogels were non-toxic to COS-7 cells. A cell culture experiment performed using COS-7 cells revealed their appropriateness for cell adhesion. Together, these results make salecan/PAAm semi-IPNs promising materials for biomedical applications.

Drug-releasing implants: current progress, challenges and perspectives

This review presents the different types and concepts of drug-releasing implants using new nanomaterials and nanotechnology-based devices.

Injectable biodegradable hydrogels: progress and challenges

Over the past decades, injectable hydrogels have emerged as promising biomaterials because of their biocompatibility, excellent permeability, minimal invasion, and easy integration into surgical procedures. These systems provide an effective and convenient way to administer a wide variety of bioactive agents such as proteins, genes, and even living cells. Additionally, they can be designed to be degradable and eventually cleared from the body after completing their missions. Given their unique characteristics, injectable biodegradable hydrogels have been actively explored as drug reservoir systems for sustained release of bioactive agents and temporary extracellular matrices for tissue engineering. This review provides an overview of state-of-the-art strategies towards constructing a rational design of injectable biodegradable hydrogels for protein drug delivery and tissue engineering. We also discuss the use of injectable hydrogels for gene delivery systems and biomedical adhesives.