Supramolecular Synthesis of Star Polymers

Supramolecular polymers, in which monomers are assembled via intermolecular interactions, have been extensively studied. The fusion of supramolecular polymers with conventional polymers has attracted the attention of many researchers. In this review article, the recent progress in the construction of supramolecular star polymers, including regular star polymers and miktoarm star polymers, is discussed. The initial sections briefly provide an overview of the conventional classification and synthesis methods for star polymers. Coordination-driven self-assembly was investigated for the supramolecular synthesis of star polymers. Star polymers with multiple polymer chains radiating from metal-organic polyhedra (MOPs) have also been described. Particular focus has been placed on the synthesis of star polymers featuring supramolecular cores formed through hydrogen-bonding-directed self-assembly. After describing the synthesis of star polymers based on host-guest complexes, the construction of miktoarm star polymers based on the molecular recognition of coordination capsules is detailed.

A Study on the Dual Thermo- and pH-Responsive Behaviors of Well-Defined Star-like Block Copolymers Synthesize by Combining of RAFT Polymerization and Thiol-Ene Click Reaction

A series of stimuli-responsive star-like block copolymers are synthesized via the combination of reversible addition, fragmentation chain transfer (RAFT) polymerization, and photo-initiated thiol-ene (PITE) click reaction. The controllable block ratio and block sequence, narrow distribution of molecular weight, and customized arm numbers of the star-shaped copolymers reveal the feasibility and benefits of combination of RAFT polymerization and PITE click reaction for synthesis of well-defined star-like (co)polymers. A clear insight into the relationship among the arm number, block sequence, and block ratio of the star-like block copolymers and their stimuli-responsive aggregation behavior was achieved via dynamic light scattering and UV-vis spectroscopy study. Notably, the star-like poly(acrylic acid)-b-poly(2-(dimethylamino) ethyl methacrylate) (star-PAA-b-PDMAEMA) shows higher lower critical solution temperature (LCST) compared to star-PDMAEMA-b-PAA with the same arm number and block ratio due to the inner charged PAA segments at pH > IEP. In addition, for star-like PAA-b-PDMAEMA, higher PAA content enhances the hydrophilicity of the polymer in basic solution and leads to the LCST increase, except for star-PAA1-b-PDMAEMA4 at pH = 9.0 (≈IEP). For star-PDMAEMA-b-PAA, the PAA content shows minimal effect on their LCSTs, except for the polymer in solution with pH = 9.5, which is far from their IEP. The star-like block copolymers with well-defined structure and tunable composition, especially the facile-controlled block sequence, bring us a challenging opportunity to control the stimuli-responsive properties of star-like block copolymers.

The Structure-Self-Assembly Relationship in PDMAEMA/Polyester Miktoarm Stars

Well-defined miktoarm star-shaped polymers based on heterofunctional glucose derivative initiator, N,N’-dimethylaminoethyl methacrylate (DMAEMA) and various cyclic esters, such as ε-caprolactone (CL), lactide (LA), glycolide (GA), were obtained by combining atom...

Macroscalar Helices Co-Assembled from Chirality-Transferring Temperature-Responsive Carbohydrate-Based Bolaamphiphiles and 1,4-Benzenediboronic Acid

We present the first example of macroscalar helices co‐assembled from temperature‐responsive carbohydrate‐based bolaamphiphiles (CHO‐Bolas) and 1,4‐benzenediboronic acid (BDBA). The CHO‐Bolas contained hydrophilic glucose or mannose moieties and a hydrophobic coumarin dimer. They showed temperature‐responsive reversible micelle‐to‐vesicle transition (MVT) in aqueous solutions. After the binding of carbohydrate moieties with boronic acids of BDBA in their alkaline solutions, right‐handed helices were formed via the temperature‐driven chirality transfer of d‐glucose or d‐mannose from the molecular to supramolecular level. These helices were co‐assembled by unreacted BDBA, boronate esters (B−O−C bonds) between CHO‐Bolas and BDBA, as well as boroxine anhydrides (B−O−B bonds) of self‐condensed BDBA. After heating at 300 °C under nitrogen, the helices displayed excellent morphological stability. Moreover, they emitted bright blue luminescence caused by strong self‐condensation of BDBA and decomposition of coumarin dimers.

Elastin-Like Polypeptides for Biomedical Applications

Elastin-like polypeptides (ELPs) are stimulus-responsive biopolymers derived from human elastin. Their unique properties—including lower critical solution temperature phase behavior and minimal immunogenicity—make them attractive materials for a variety of biomedical applications. ELPs also benefit from recombinant synthesis and genetically encoded design; these enable control over the molecular weight and precise incorporation of peptides and pharmacological agents into the sequence. Because their size and sequence are defined, ELPs benefit from exquisite control over their structure and function, qualities that cannot be matched by synthetic polymers. As such, ELPs have been engineered to assemble into unique architectures and display bioactive agents for a variety of applications. This review discusses the design and representative biomedical applications of ELPs, focusing primarily on their use in tissue engineering and drug delivery.

A pH and UCST thermo-responsive tri-block copolymer (PAA-b-PDMA-b-P(AM-co-AN)) with micellization and gelatinization in aqueous media for drug release

A brand new pH and thermo-responsive amphiphilic ABC triblock copolymer of poly(acrylic acid)-block-poly(N,N-dimethyl acrylamide)-block-poly(acrylamide-co-acrylonitrile) (PAA-b-PDMA-b-P(AM-co-AN)) was applied as drug carrier systems.

Thermo- and redox-responsive dumbbell-shaped copolymers: from structure design to the LCST–UCST transition

Redox- and thermo-responsive dumbbell-shaped copolymers and their self-assembly and stimuli-responsive properties were investigated.

Thermo-tunable colorimetric detection of mercury(ii) ions driven by the temperature-dependent assembly and disassembly of a block copolymer

A thermo-responsive double-hydrophilic block copolymer (DHBC) was synthesized for the thermo-tunable detection of mercury(ii) ions modulated by a temperature-dependent morphological transition between unimers and micellar aggregates.

Supramolecular control over pillararene-based LCST phase behaviour

Based on the supramolecular interactions between pillar[5]arenes and ionic liquids, supramolecular control was successfully introduced into thermo-responsive systems to adjust LCST phase behaviour in water.

Nanogel-like UCST triblock copolymer micelles showing large volume expansion before abrupt dissolution

A comprehensive study of the thermally induced large expansion in volume prior to the abrupt dissociation of the micelles of a novel UCST triblock copolymer.

Micellar Self-Assembly of Recombinant Resilin-/Elastin-Like Block Copolypeptides

Reported here is the synthesis of perfectly sequence defined, monodisperse diblock copolypeptides of hydrophilic elastin-like and hydrophobic resilin-like polypeptide blocks and characterization of their self-assembly as a function of structural parameters by light scattering, cryo-TEM, and small-angle neutron scattering. A subset of these diblock copolypeptides exhibit lower critical solution temperature and upper critical solution temperature phase behavior and self-assemble into spherical or cylindrical micelles. Their morphologies are dictated by their chain length, degree of hydrophilicity, and hydrophilic weight fraction of the ELP block. We find that (1) independent of the length of the corona-forming ELP block there is a minimum threshold in the length of the RLP block below which self-assembly does not occur, but that once that threshold is crossed, (2) the RLP block length is a unique molecular parameter to independently tune self-assembly and (3) increasing the hydrophobicity of the corona-forming ELP drives a transition from spherical to cylindrical morphology. Unlike the self-assembly of purely ELP-based block copolymers, the self-assembly of RLP-ELPs can be understood by simple principles of polymer physics relating hydrophilic weight fraction and polymer-polymer and polymer-solvent interactions to micellar morphology, which is important as it provides a route for the de novo design of desired nanoscale morphologies from first principles.

Synthetic methodologies and spatial organization of metal chelate dendrimers and star and hyperbranched polymers

The synthetic methodologies, physico-chemical peculiarities, properties, and structure of metal chelate dendrimers and star and hyperbranched polymers are considered.

Functional micelles formed from glucose-, thermo- and pH-triple responsive copolymers for controlled release

Spherical micelles self-assembled from the block copolymer PPBDEMA-b-PDMAEMA presented glucose, thermo- and pH-triple responsive properties.

Star Polymers

Recent advances in controlled/living polymerization techniques and highly efficient coupling chemistries have enabled the facile synthesis of complex polymer architectures with controlled dimensions and functionality. As an example, star polymers consist of many linear polymers fused at a central point with a large number of chain end functionalities. Owing to this exclusive structure, star polymers exhibit some remarkable characteristics and properties unattainable by simple linear polymers. Hence, they constitute a unique class of technologically important nanomaterials that have been utilized or are currently under audition for many applications in life sciences and nanotechnologies. This article first provides a comprehensive summary of synthetic strategies towards star polymers, then reviews the latest developments in the synthesis and characterization methods of star macromolecules, and lastly outlines emerging applications and current commercial use of star-shaped polymers. The aim of this work is to promote star polymer research, generate new avenues of scientific investigation, and provide contemporary perspectives on chemical innovation that may expedite the commercialization of new star nanomaterials. We envision in the not-too-distant future star polymers will play an increasingly important role in materials science and nanotechnology in both academic and industrial settings.

Star-shaped and star-block polymers with a porphyrin core: from LCST–UCST thermoresponsive transition to tunable self-assembly behaviour and fluorescence performance

The micelles self-assembled from star-shaped and star-block copolymers present a transition of LCST–UCST thermoresponsive properties through a facile quaternization reaction.

A star-shaped amphiphilic block copolymer with dual responses: synthesis, crystallization, self-assembly, redox and LCST–UCST thermoresponsive transition

The micelles/aggregates that were self-assembled from a star-shaped copolymer presented redox-responsive behaviour and LCST–UCST thermoresponsive transition.

Amphiphilic block copolymer terminated with pyrene group: from switchable CO2-temperature dual responses to tunable fluorescence

Py-PCL-b-P(NIPAM-co-DMAEMA) micelles can present switchable CO₂-temperature dual responses and tunable fluorescence properties.

Temperature- and redox-responsive magnetic complex micelles for controlled drug release

PCL-SS-PDMAEMA/Fe₃O₄ magnetic complex micelles can present dual temperature- and redox-responses, magnetism and magnetothermal properties.

Facile synthesis of silica nanoparticles grafted with quaternized linear, comblike and toothbrushlike copolymers

The alkoxysilane–hydroxyl coupling reaction, quaternization and RAFT polymerization were combined to synthesize three types of quaternized copolymers grafted silica with thermo-dependent surface wettability.

Diverse thermoresponsive behaviors of uncharged UCST block copolymer micelles in physiological medium

Three amphiphilic diblock copolymers, representative of three types of block copolymer (BCP) design, were synthesized using reversible addition-fragmentation chain-transfer (RAFT) polymerization. All of them have a same uncharged block of a random copolymer of commercially available acrylamide and acrylonitrile, P(AAm-co-AN), and exhibit a composition-tunable upper critical solution temperature (UCST). We show that by coupling a common P(AAm-co-AN) block with either hydrophobic polystyrene (PS) or hydrophilic poly(dimethylacrylamide) (PDMA) or the lower critical solution temperature (LCST) polymer of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), the BCP micelles formed in water or in phosphate buffered saline (PBS) can display diverse and UCST-dictated changes in response to temperature variations, such as the reversible dispersion-aggregation of micelles, dissolution-formation of micelles, and reversal of micelle core and corona. The results point out that P(AAm-co-AN) is a robust UCST polymer that can be introduced into controlled polymer architectures producible by RAFT, the same way as using the extensively studied LCST counterparts like poly(N-isopropylacrylamide) (PNIPAM). This ability should make the door wide open to exploring new thermosensitive polymers based on the thermosensitivity opposite to the LCST.

Synthesis, Self-Assembly, and Multi-Stimuli Responses of a Supramolecular Block Copolymer

A supramolecular block copolymer is prepared by the molecular recognition of nucleobases between poly(2-(2-methoxyethoxy)ethyl methacrylate-co-oligo(ethylene glycol) methacrylate)-SS-poly(ε-caprolactone)-adenine (P(MEO2 MA-co-OEGMA)-SS-PCL-A) and uracil-terminated poly(ethylene glycol) (PEG-U). Because the block copolymer is linked by the combination of covalent (disulfide bond) and noncovalent (AU) bonds, it not only has similar properties to conventional covalently linked block copolymers but also possesses a dynamic and tunable nature. The copolymer can self-assemble into micelles with a PCL core and P(MEO2 MA-co-OEGMA)/PEG shell. The size and morphologies of the micelles/aggregates can be adjusted by altering the temperature, pH, salt concentration, or adding dithiothreitol (DTT) to the solution. The controlled release of Nile red is achieved at different environmental conditions.