Electrocatalysis: From Planar Surfaces to Nanostructured Interfaces

The reactions critical for the energy transition center on the chemistry of hydrogen, oxygen, carbon, and the heterogeneous catalyst surfaces that make up electrochemical energy conversion systems. Together, the surface-adsorbate interactions constitute the electrochemical interphase and define reaction kinetics of many clean energy technologies. Practical devices introduce high levels of complexity where surface roughness, structure, composition, and morphology combine with electrolyte, pH, diffusion, and system level limitations to challenge our ability to deconvolute underlying phenomena. To make significant strides in materials design, a structured approach based on well-defined surfaces is necessary to selectively control distinct parameters, while complexity is added sequentially through careful application of nanostructured surfaces. In this review, we cover advances made through this approach for key elements in the field, beginning with the simplest hydrogen oxidation and evolution reactions and concluding with more complex organic molecules. In each case, we offer a unique perspective on the contribution of well-defined systems to our understanding of electrochemical energy conversion technologies and how wider deployment can aid intelligent materials design.

Sputtered Cu-doped NiO thin films as an efficient electrocatalyst for methanol oxidation

The efficient electrocatalysts for direct methanol oxidation play an essential role in the electrochemical energy conversion systems for their application in a wide range of portable applications. Consequently, Cu-doped NiO thin films on fluorine-doped tin oxide (FTO) were successfully prepared by the co-sputtering deposition technique, using various deposition times (300, 600, 900, and 1200 seconds), and producing films of different thicknesses (30, 55, 90, and 120 nm, respectively). X-ray diffraction (XRD) revealed the ideal crystallinity of the structure of the prepared films and was used to observe the effect of the thickness of the films on the crystal size. Energy-dispersive X-ray spectroscopy (EDS) confirmed the purity of the deposited film without any contamination. Field emission scanning electron microscopy (FESEM) images confirmed the film thickness increase with increasing deposition time. The surface roughness value of the Cu-NiO 1200 film was found to be 3.2 nm based on the atomic force microscopy (AFM) measurements. The deposited thin films of different thicknesses have been used as electrocatalysts for methanol oxidation at various concentrations of methanol (0, 0.5, 1, and 2 M), and displayed the highest electrocatalytic performance in 1 M methanol. Cu-doped NiO thin films have the advantage as electrocatalysts where they can be used directly without adding any binder or conducting agents, this is because Cu-doped NiO is deposited with high adhesion and strong electrical contact to the FTO substrate. A clear impact on the catalytic activity with increasing film thickness and a correlation between the film thickness and its catalytic activity was observed. The current density increased by about 60% for the Cu-NiO 1200 sample compared to Cu-NiO 300 sample, with the lowest onset potential of 0.4 V vs. Ag/AgCl. All deposited thin films of different thicknesses exhibited high stability at 0.6 V in 1 M methanol. This will open the window toward using physical deposition techniques for optimizing the electrocatalytic activity of different catalysts for electrocatalytic applications.

DNA-Modified Cobalt Tungsten Oxide Hydroxide Hydrate Nanochains as an Effective Electrocatalyst with Amplified CO Tolerance during Methanol Oxidation

Direct methanol fuel cell technology implementation mainly depends on the development of non-platinum catalysts with good CO tolerance. Among the widely studied transition-metal catalysts, cobalt oxide with distinctively higher catalytic efficiency is highly desirable. Here, we have evolved a simple method of synthesizing cobalt tungsten oxide hydroxide hydrate nanowires with DNA (CTOOH/DNA) and without incorporating DNA (CTOOH) by microwave irradiation and subsequently employed them as electrocatalysts for methanol oxidation. Following this, we examined the influence of incorporating DNA into CTOOH by cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. The enhanced electrochemical surface area of CTOOH offered readily available electroactive sites and resulted in a higher oxidation current at a lower onset potential for methanol oxidation. On the other hand, CTOOH/DNA exhibited improved CO tolerance and it was evident from the chronoamperometric studies. Herein, we noticed only a 2.5 and 1.8% drop at CTOOH- and CTOOH/DNA-modified electrodes, respectively, after 30 min. Overall, from the results, it was evident that the presence of DNA in CTOOH played an important role in the rapid removal of adsorbed intermediates and regenerated active catalyst centers possibly by creating high density surface defects around the nanochains than bare CTOOH.

Three-dimensional mesoporous PtM (M = Co, Cu, Ni) nanowire catalysts with high-performance towards methanol electro-oxidation reaction and oxygen reduction reaction

Alloying with transition elements is proven to be an effective way to improve the methanol electro-oxidation reaction (MOR) and oxygen reduction reaction (ORR) activities of Pt catalysts for direct methanol fuel cells (DMFCs). Through a process of rapid solidification and two-step dealloying, we have successfully fabricated three-dimensional mesoporous PtM (M = Co, Cu, Ni) nanowire catalysts, which show much enhanced electrocatalytic properties towards MOR and ORR in comparison with the commercial Pt/C catalyst. Electrochemical tests indicate that alloying with Cu presents the best ORR activities, the half-wave potential of which is 42 mV positively shifted compared with the commercial Pt/C (0.892 V vs. RHE). Meanwhile, the PtM nanowire catalysts also possess good CO tolerance as well as stability for 10 000 cycles of cyclic voltammetry scanning. This convenient preparation method is promising for the development of high performance electrocatalysts for MOR and ORR in DMFCs.

Binder-Free Construction of a Methanol Tolerant Pt/TiO2/Carbon Paper Anode by Atomic Layer Deposition

Direct liquid fuel cells are very appealing alternatives for fighting climate change, particularly in the field of personal mobility solutions. This is especially true for direct methanol fuel cells (DMFCs) that use and burn safe fuels that are readily available from sustainable sources using well-established C1 chemistry. However, DMFCs also have some serious competitive disadvantages, like the high cost of the noble metal catalysts, the difficulties of the catalyst application, and the poisoning of the catalyst due to carbon monoxide formation. Here we demonstrate that depositing platinum on TiO2 by atomic layer deposition (ALD) is an easy, reproducible method for the synthesis of TiO2-supported platinum catalyst for methanol oxidation with superior anti-poisoning properties.

MOF-Derived 2D/3D Hierarchical N-Doped Graphene as Support for Advanced Pt Utilization in Ethanol Fuel Cell

Development of bifunctional catalysts with low platinum (Pt) content for the ethanol oxidation reaction (EOR) and the oxygen reduction reaction (ORR) is highly desirable, yet challenging. Herein, we present structural engineering of a series of two-dimensional/three-dimensional (2D/3D) hierarchical N-doped graphene-supported nanosized Pt₃Co alloys and Co clusters (PtCo@N-GNSs) via a hydrolysis-pyrolysis route. For the ORR, the optimal PtCo@N-GNS exhibits a high mass activity of 3.01 A mg_Pt^-1, which is comparable to the best Pt-based catalyst obtained through sophisticated synthesis. It also possesses excellent stability with minor decay after 50 000 cyclic voltammograms (CV) cycles in acidic medium. For the EOR, PtCo@N-GNS achieves the highest mass-specific and area-specific activities of 1.96 A mg_Pt^-1 and 5.75 mA cm^-2, respectively, among all of the reported EOR catalysts to date. The unique 2D/3D hierarchy, high Pt utilization, and valid encapsulation of nanosized Pt₃Co/Co synergistically contribute to the robust ORR and EOR activities of the present PtCo@N-GNS. A direct ethanol fuel cell based on PtCo@N-GNS delivers a high open-circuit potential of 0.9 V, a stable power density of 10.5 mW cm^-2, and an excellent rate performance, implying the feasibility of the bifunctional PtCo@N-GNS. This work offers a new strategy for designing an ultralow Pt loading yet highly active and durable catalyst for ethanol fuel cell application.

Synthesis and characterization of size controlled alloy nanoparticles

Bimetallic and multimetallic alloy nanoparticles are emerging as a class of critical nanomaterials in electronic, optical and magnetic fields due to their unique physic-chemical properties. In particular, precise control of the nanoparticle size can endow them with broad versatility and high selectivity. This chapter reviews some tremendous achievements in the development of size controlled bimetallic and multimetallic alloy nanoparticles, with special emphasis on general preparation methods, characterization methodologies and instrumentation techniques. Some key factors and future perspectives on the development of size-controlled bimetallic and multimetallic alloy nanoparticles are also discussed.

Pt-Co Alloy Nanoparticles on a γ-Al2 O3 Support: Synergistic Effect between Isolated Electron-Rich Pt and Co for Automotive Exhaust Purification

There is interest in minimizing or eliminating the use of Pt in catalysts by replacing it with more widely abundant and cost-effective elements. The alloying of Pt with non-noble metals is a potential strategy for reducing Pt use because interactions between Pt and non-noble metals can modify the catalyst structure and electronic properties. Here, a γ-Al₂ O₃ -supported bimetallic catalyst [Pt(0.1)Co(1)/Al₂ O₃ ] was prepared which contained 0.1 wt % Pt and 1 wt % Co and thus featured an extremely low Pt : Co ratio (<1 : 30 mol/mol). The Pt and Co in this catalyst formed alloy nanoparticles in which isolated electron-rich Pt atoms were present on the nanoparticle surface. The activity of this Pt(0.1)Co(1)/Al₂ O₃ catalyst for the purification of automotive exhaust was comparable to the activities of 0.3 and 0.5 wt % Pt/γ-Al₂ O₃ catalysts. Electron-rich Pt and metallic Co promoted activation of NO_x and oxidization of CO and hydrocarbons, respectively. This strategy of tuning the surrounding structure and electronic state of a noble metal by alloying it with an excess of a non-noble metal will enable reduced noble metal use in catalysts for exhaust purification and other environmentally important reactions.

Core-shell structured PtRu nanoparticles@FeP promoter with an efficient nanointerface for alcohol fuel electrooxidation

In this study, a bottleneck was overcome for direct alcohol fuel cells using state-of-the-art PtRu catalysts for alcohol fuel oxidation. Herein, a core-shell structured PtRu catalyst system based on the emerging promoter FeP was developed that showed excellent catalytic performance for the oxidation of alcohol fuels. The surface spectrometric analysis and morphology observation confirmed the formation of a nanointerface of the PtRu shell and FeP core hybrid catalyst (PtRu@FeP), and efficient ligand effects and electronic effects were found to result from the noble metal active sites and adjacent promoter in the core-shell structure. The facile formation of oxygen-containing species and the strong electronic effects could activate the Pt active sites, leading to high catalytic performance. High anti-CO poisoning ability was found for this catalyst system when compared with the case of the benchmark commercial PtRu/C catalyst (110 mV less and 60 mV less as evaluated by the peak and onset potentials for CO oxidation, respectively). The PtRu@FeP catalysts also exhibited much higher catalytic activity and stability when compared with commercial and home-made PtRu/C catalysts; specifically, the peak current density of the PtRu@FeP 1 : 1 catalyst was about 2 and 3 times higher than those of the commercial PtRu/C catalyst and home-made PtRu/C for the oxidation of the alcohol fuels methanol and ethanol; moreover, high catalytic efficiency, improved by 2 times, was found, as expressed by the specific activity. Excellent catalytic stability as evaluated by 1000 cycles of cyclic voltammetry measurements was also demonstrated for the PtRu@FeP catalysts. The high catalytic performance could be attributed to the intimate nanointerface contact of the core-shell structured PtRu shell over the FeP core via a bi-functional catalytic mechanism and electronic effects based on the ligand effect in this catalyst system. The current study is a significant step to increase the PtRu catalytic performance via nanointerface construction by a core-shell structure on a novel promoter for direct alcohol fuel cells.

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro-oxidation of Liquid Fuels

Efficient electro-oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂ . Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀ -structure and Au segregates on the surface to alloy with Pt. The L1₀ -structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro-oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt , 1.49 A/mg_Pt , and 11.97 A/mg_Pt , respectively in 0.1 m HClO₄ . The L1₀ -CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface-enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C-C bond more efficiently for ethanol oxidation.

Self-assembly of Pt nanocrystals into three-dimensional superlattices results in enhanced electrocatalytic performance for methanol oxidation

A simple low-temperature solution approach was developed to directly realize a series of three-dimensional Pt nanocrystal superlattices composed of well-defined interior Pt nanocrystals for enhanced electrocatalytic performance for methanol oxidation.

Active Methanol Oxidation Reaction by Enhanced CO Tolerance on Bimetallic Pt/Ir Electrocatalysts Using Electronic and Bifunctional Effects

Platinum-based metal alloys have been generally developed to provide high carbon monoxide resistance in the anodes of direct methanol fuel cells. We report the potential of bimetallic platinum/iridium electrocatalysts in preserving the outstanding carbon monoxide tolerance obtained from both experimental and theoretical studies, which represents the enhanced electrochemical performance of methanol oxidation and the in-depth and stepwise investigations for reaction mechanisms, respectively. In this study, the findings highlight the dual-enhancement characteristics of low carbon monoxide adsorption energy (electronic effect) and carbon monoxide oxidative removal (bifunctional effect) compared with various electrocatalysts such as platinum, iridium, and platinum/ruthenium alloys. In addition, the reaction affinity of platinum/iridium alloys for methanol dehydrogenation is also studied in accordance with atomistic properties, such as adsorption energy and electronic band gap, to understand the electrochemical performance compared to Pt. The results obtained indicate that the platinum/iridium alloy surface played diverse roles in terms of its multifunctional behaviors for carbon monoxide tolerance, including the favorable mechanism of methanol dehydrogenation. It turns out that throughout the theoretical in-depth studies, platinum/iridium alloys are promising candidates in terms of the extension for electrocatalytic material designs that differ from Ru in direct methanol fuel cells.

Time Evolution Characterization of Atmospheric-Pressure Plasma Jet (APPJ)-Synthesized Pt-SnOx Catalysts

We characterize the time evolution (≤120 s) of atmospheric-pressure plasma jet (APPJ)-synthesized Pt-SnOx catalysts. A mixture precursor solution consisting of chloroplatinic acid and tin(II) chloride is spin-coated on fluorine-doped tin oxide (FTO) glass substrates, following which APPJ is used for converting the spin-coated precursors. X-ray photoelectron spectroscopy (XPS) indicates the conversion of a large portion of metallic Pt and a small portion of metallic Sn (most Sn is in oxidation states) from the precursors with 120 s APPJ processing. The dye-sensitized solar cell (DSSC) efficiency with APPJ-synthesized Pt-SnOx CEs is improved greatly with only 5 s of APPJ processing. Electrochemical impedance spectroscopy (EIS) and Tafel experiments confirm the catalytic activities of Pt-SnOx catalysts. The DSSC performance can be improved with a short APPJ processing time, suggesting that a DC-pulse nitrogen APPJ can be an efficient tool for rapidly synthesizing catalytic Pt-SnOx counter electrodes (CEs) for DSSCs.

Platinum Nanostructure/Nitrogen-Doped Carbon Hybrid: Enhancing its Base Media HER/HOR Activity through Bi-functionality of the Catalyst

The design and synthesis of an active catalyst for the hydrogen evolution reaction/hydrogen oxidation reaction (HER/HOR) are important for the development of hydrogen-based renewable technologies. The synthesis of a hybrid of platinum nanostructures and nitrogen-doped carbon [Pt-(PtO_x )-NSs/C] for HER/HOR applications is reported herein. The HER activity of this Pt-(PtO_x )-NSs/C catalyst is 4 and 6.5 times better than that of commercial Pt/C in acids and bases, respectively. The catalyst exhibits a current density of 10 mA cm^-2 at overpotentials of 5 and 51 mV, with Tafel slopes of 29 and 64 mV dec^-1 in 0.5 m H₂ SO₄ and 0.5 m KOH. This catalyst also showed superior HOR activity at all pH values. The HER/HOR activity of Pt-(PtO_x )-NSs/C and PtO_x -free Pt-nanostructures on carbon (PtNSs/C) catalysts are comparable in acid. The presence of PtO_x in Pt-(PtO_x )-NSs/C makes this Pt catalyst more HER/HOR-active in basic media. The activity of the Pt-(PtO_x )-NSs/C catalyst is fivefold higher than that of the PtNSs/C catalyst in basic medium, although their activity is comparable in acid. The hydrogen-binding energy and oxophilicity are two equivalent descriptors for HER/HOR in basic media. A bifunctional mechanism for the enhanced alkaline HER/HOR activity of the Pt-(PtO_x )-NSs/C catalyst is proposed. In the bifunctional Pt-(PtO_x )-NSs/C catalyst, PtO_x provides an active site for OH^- adsorption to form OH_ads , which reacts with hydrogen intermediate (H_ads ), present at neighbouring Pt sites to form H₂ O; this leads to enhancement of the HOR activity in basic medium. This work may provide an opportunity to develop catalysts for various renewable-energy technologies.

One-Pot Synthesis of Concave Platinum-Cobalt Nanocrystals and Their Superior Catalytic Performances for Methanol Electrochemical Oxidation and Oxygen Electrochemical Reduction

Exploring highly efficient electro-catalysts is of significant urgency for the widespread uptake of the direct methanol fuel cells (DMFCs). Pt-Co nanocrystals have attracted considerable attentions because of their superior catalytic performance toward both methanol oxidation and oxygen reduction in the preliminary assessments. This Research Article presents a Pt-Co bimetal catalyst that is synthesized through a facile coreduction strategy. The Pt-Co nanocrystals have concave cubic shape with a high uniform size of 7-9 nm and Pt-rich surfaces. The catalysis of the concave cubic Pt-Co nanoparticles toward both methanol electrochemical oxidation reaction (MOR) and oxygen electrochemical reduction reaction (ORR) is evaluated. In comparison with the commercial Pt/C catalyst (Johnson Matthey), the present concave cubic Pt-Co catalyst displays superior performances in not only catalytic activity but also durability. The concave Pt-Co catalyst also shows higher activities than spherical and cubic Pt-Co nanoparticles. The dramatic enhancement is mainly attributed to its alloyed composition, Pt-rich surface and the concave nanostructure. The results of our research indicate that the concave Pt-Co nanocrystal could be a promising catalyst for both MOR and ORR. The present work might also raise more concerns on exploiting morphology and composition of nanocrystal catalysts, which are expected to provide high catalytic performance in electrochemical reactions.

Biocompatible nickel-prussian blue@silver nanocomposites show potent antibacterial activities

Aim

Silver nanoparticles have long been used as potent antibacterial agents. However, toxicity concerns of silver nanoparticles have limited their successful clinical applications. Hence, development of silver-based novel biocompatible nanomaterials for antibacterial applications is a challenging task.

Materials & methods

Accordingly, in this work, we synthesized a biocompatible silver-based nanocomposite for antibacterial applications. The nanocompostie was characterized by several analytical techniques. The nanocomposite was further tested for its cytotoxicity in cells, chicken embryo and bacteria.

Results & Conclusion

Herein, we report a simple and cost-effective method for the synthesis of nickel-prussian blue@silver nanocomposites. The nanocomposite is highly stable and shows biocompatibility observed by in vitro assay and by ex vivo chicken embryonic angiogenesis assay. The nanocomposite exhibits profound antibacterial activity toward Gram-negative (Escherichia coli) and Gram-positive (Bacillus subtillus) bacteria. The results altogether suggest the future potential applications of nickel-prussian blue@silver nanocomposite as an antibacterial agent.

Shape controlled synthesis of porous tetrametallic PtAgBiCo nanoplates as highly active and methanol-tolerant electrocatalyst for oxygen reduction reaction

Mechanistic control is a powerful means for manufacturing specific shapes of metal nanostructures and optimizing their performance in a variety of applications. Thus, we successfully synthesized multimetallic nanoplates (PtAgBiCo and PtAgBi) by combining the concepts of crystal symmetry, oxidative etching and seed ratio, and tuned their activity, stability and methanol tolerance, as well as Pt utilization, for the oxygen reduction reaction in direct methanol fuel cells. Systematic studies reveal that the formation of PtAgBiCo triangular nanoplates with a high morphological yield (>90%) can be achieved by crystallinity alteration, while electrochemical measurements indicate that the PtAgBiCo nanoplates have superior electrocatalytic activity towards the oxygen reduction reaction. The specific and mass activity of the PtAgBiCo nanoplates are 8 and 5 times greater than that of the commercial Pt/C catalyst, respectively. In addition, the tetrametallic PtAgBiCo nanoplates exhibit a more positive half-wave potential for the oxygen reduction reaction and possess an excellent methanol tolerance limit compared with the commercial Pt/C catalyst.

Facile Aqueous-Phase Synthesis of the PtAu/Bi2O3 Hybrid Catalyst for Efficient Electro-Oxidation of Ethanol

In this work, we present a facile aqueous-phase synthesis of a hybrid catalyst consisting of PtAu alloy supported on Bi₂O₃ microspheres. Multistep reduction of HAuCl₄ and K₂PtCl₄ salts on Bi₂O₃ and subsequent annealing lead to the formation of this hybrid catalyst. To the best of our knowledge, this is the first report of using Bi₂O₃ as a catalyst support in fuel cell applications. The material was characterized by powder X-ray diffraction and various microscopic techniques. This composite showed remarkable activity as well as stability toward the electro-oxidation of ethanol in comparison to commercially available Pt/C. The order of the reactivity was found to be commercial Pt/C (50.4 mA/m²mg_Pt^-1) < Pt/Bi₂O₃(10) (108 mA/m²mg_Pt^-1) < PtAu/Bi₂O₃(10) (459 mA/m²mg_Pt^-1). The enhancement in the activity can be explained through cooperative effects, namely, ligand effects of gold and Bi₂O₃ support, which helps in removing carbon monoxide molecules to avoid the poisoning of the Pt active sites.

Self-Supported PtAuP Alloy Nanotube Arrays with Enhanced Activity and Stability for Methanol Electro-Oxidation

Inhibiting CO formation can more directly address the problem of CO poisoning during methanol electro-oxidation. In this study, 1D self-supported porous PtAuP alloy nanotube arrays (ANTAs) are synthesized via a facile electro-codeposition approach and present enhanced activity and improved resistance to CO poisoning through inhibiting CO formation (non-CO pathway) during the methanol oxidation reaction in acidic medium. This well-controlled Pt-/transition metal-/nonmetal ternary nanostructure exhibits a specific electroactivity twice as great as that of PtAu alloy nanotube arrays and Pt/C. At the same time, PtAuP ANTAs show a higher ratio of forward peak current density (I_f ) to backward peak current density (I_b ) (2.34) than PtAu ANTAs (1.27) and Pt/C (0.78). The prominent I_f /I_b value of PtAuP ANTAs indicates that most of the intermediate species are electro-oxidized to carbon dioxide in the forward scan, which highlights the high electroactivity for methanol electro-oxidation.

Facile Fabrication of Platinum-Cobalt Alloy Nanoparticles with Enhanced Electrocatalytic Activity for a Methanol Oxidation Reaction

Decreasing the cost associated with platinum-based catalysts along with improving their catalytic properties is a major challenge for commercial direct methanol fuel cells. In this work, a simple and facile strategy was developed for the more efficient preparation of multi-walled carbon nanotube (MWCNT) -supported Pt/CoPt composite nanoparticles (NPs) via solution plasma sputtering with subsequent thermal annealing. Quite different from general wet synthesis methods, Pt/CoPt composite NPs were directly derived from metal wire electrodes without any additions. The obtained Pt/CoPt/MWCNTs composite catalysts exhibited tremendous improvement in the electro-oxidation of methanol in acidic media with mass activities of 1719 mA mg⁻¹_Pt. This value is much higher than that of previous reports of Pt-Co alloy and commercial Pt/C (3.16 times) because of the many active sites and clean surface of the catalysts. The catalysts showed good stability due to the special synergistic effects of the CoPt alloy. Pt/CoPt/MWCNTs can be used as a promising catalyst for direct methanol fuel cells. In addition, this solution plasma sputtering-assisted synthesis method introduces a general and feasible route for the synthesis of binary alloys.

Development of a Wattecs parallel autoclave system synthesis technique for tailoring surface compositions and valence states of Pt–Fe alloys to realize bifunctional electrocatalysis

We have developed a synthesis technique using a Wattecs parallel autoclave system for tailoring the surface compositions and valence states of Pt–Fe alloys with N-doping to achieve bifunctional electrocatalysis.

A hierarchically structured PtCo nanoflakes–nanotube as an electrocatalyst for methanol oxidation

A novel PtCo nanoflake–nanotube architecture was prepared through a galvanic replacement approach. Due to the unique structure, it exhibited excellent electrocatalytic performances for methanol oxidation.

Cyano-bridged coordination polymer hydrogel-derived Sn-Fe binary oxide nanohybrids with structural diversity: from 3D, 2D, to 2D/1D and enhanced lithium-storage performance

Metal oxide nanohybrids with uniform dimensions and controlled architectures possess unique compositional and structural superiorities, and thus harbor promising potential for a series of applications in energy, catalysis, and sensing systems. Herein, we propose a facile, general, and scalable cyano-bridged coordination polymer hydrogel-derived thermal-oxidation route for the construction of main-group metal and transition-metal heterometallic oxide nanohybrids with controlled constituents and architectures. The formation of Sn-Fe binary oxide nanohybrids has been demonstrated as an example by using cyano-bridged Sn(iv)-Fe(ii) bimetallic coordination polymer hydrogels (i.e., SnCl4-K4Fe(CN)6 cyanogels, Sn-Fe cyanogels) as precursors. The physicochemical properties of Sn-Fe cyanogels with different Sn/Fe ratios have been systematically examined, and it is found that perfect Sn-Fe cyanogels without unbridged Sn(iv) or Fe(ii) can be formed with Sn/Fe ratios from 2 : 1 to 1 : 2. More importantly, the simple adjustment of Sn/Fe ratios in the Sn-Fe cyanogel precursors can realize flexible dimensional control of the Sn-Fe binary oxide nanohybrids, and 2D/1D SnO2-Fe2O3 hierarchitectures, 2D SnO2-Fe2O3 nanosheets, and 3D SnO2-Fe2O3 networks have been synthesized using the Sn-Fe 1 : 2, Sn-Fe 1 : 1, and Sn-Fe 2 : 1 cyanogels as precursors, respectively. To demonstrate their compositional/structural superiorities and potential applications, the lithium-storage utilization of the Sn-Fe binary oxide nanohybrids has been selected as an objective application, and the nanohybrids exhibit Sn/Fe ratio-dependent lithium-storage performance. As a representative example, the 2D/1D SnO2-Fe2O3 hierarchitectures manifest markedly enhanced Li-storage performance in terms of reversible capacities and cycling stability in comparison with their constituent units, i.e., bare SnO2 nanosheets and Fe2O3 nanorods. The proposed cyanogel-derived thermal-oxidation strategy could open up new opportunities for constructing heterometallic oxide nanohybrids, and the rationally designed metal oxide nanohybrids may find broad applications in energy, catalysis, and sensing fields by virtue of their structural and compositional features.

Highly efficient and durable PtCo alloy nanoparticles encapsulated in carbon nanofibers for electrochemical hydrogen generation

PtCo/CNFs exhibit extraordinary catalytic activity and durability for hydrogen evolution reaction, even approaching the performance of the commercial Pt/C catalyst, which can be attributed to the alloy structure and the encapsulation of PtCo alloy nanoparticles in CNFs.

Alternating Current Dielectrophoresis Optimization of Pt-Decorated Graphene Oxide Nanostructures for Proficient Hydrogen Gas Sensor

Alternating current dielectrophoresis (DEP) is an excellent technique to assemble nanoscale materials. For efficient DEP, the optimization of the key parameters like peak-to-peak voltage, applied frequency, and processing time is required for good device. In this work, we have assembled graphene oxide (GO) nanostructures mixed with platinum (Pt) nanoparticles between the micro gap electrodes for a proficient hydrogen gas sensors. The Pt-decorated GO nanostructures were well located between a pair of prepatterned Ti/Au electrodes by controlling the DEP technique with the optimized parameters and subsequently thermally reduced before sensing. The device fabricated using the DEP technique with the optimized parameters showed relatively high sensitivity (∼10%) to 200 ppm hydrogen gas at room temperature. The results indicates that the device could be used in several industry applications, such as gas storage and leak detection.

A strategy for fabricating porous PdNi@Pt core-shell nanostructures and their enhanced activity and durability for the methanol electrooxidation

Three-dimensionally (3D) porous morphology of nanostructures can effectively improve their electrocatalytic activity and durability for various electrochemical reactions owing to big surface area and interconnected structure. Cyanogel, a jelly-like inorganic polymer, can be used to synthesize various three-dimensionally (3D) porous alloy nanomaterials owing to its double-metal property and particular 3D backbone. Here, 3D porous PdNi@Pt core-shell nanostructures (CSNSs) are facilely synthesized by first preparing the Pd-Ni alloy networks (Pd-Ni ANWs) core via cyanogel-reduction method followed by a galvanic displacement reaction to generate the Pt-rich shell. The as-synthesized PdNi@Pt CSNSs exhibit a much improved catalytic activity and durability for the methanol oxidation reaction (MOR) in the acidic media compared to the commercial used Pt black because of their specific structural characteristics. The facile and mild method described herein is highly attractive for the synthisis of 3D porous core-shell nanostructures.

Cyano-bridged coordination polymer gel as a precursor to a nanoporous In2O3–Co3O4 hybrid network for high-capacity and cycle-stable lithium storage

A cyanogel-derived three-dimensional nanoporous In₂O₃–Co₃O₄ hybrid network as a high-capacity and long-life anode material for lithium-ion batteries.

Synthesis of cubic PtPd alloy nanoparticles as anode electrocatalysts for methanol and formic acid oxidation reactions

Cubic PtPd alloy nanoparticles for improved methanol and formic acid oxidation reactions were synthesized using a thermal decomposition method.

Ultrasonic enhanced synthesis of multi-walled carbon nanotube supported Pt–Co bimetallic nanoparticles as catalysts for the oxygen reduction reaction

Ultrasonic enhanced synthesis of multi-walled carbon nanotubes supported Pt–Co bimetallic nanoparticles as catalysts for oxygen reduction reaction.