A portable and autonomous multichannel fluorescence detector for on-line and in situ explosive detection in aqueous phase

Molecular design and architectonics towards film-based fluorescent sensing

The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.

Rapid and On-Scene Chemical Identification of Intact Explosives with Portable Near-Infrared Spectroscopy and Multivariate Data Analysis

There is an ongoing forensic and security need for rapid, on-scene, easy-to-use, non-invasive chemical identification of intact energetic materials at pre-explosion crime scenes. Recent technological advances in instrument miniaturization, wireless transfer and cloud storage of digital data, and multivariate data analysis have created new and very promising options for the use of near-infrared (NIR) spectroscopy in forensic science. This study shows that in addition to drugs of abuse, portable NIR spectroscopy with multivariate data analysis also offers excellent opportunities to identify intact energetic materials and mixtures. NIR is able to characterize a broad range of chemicals of interest in forensic explosive investigations, covering both organic and inorganic compounds. NIR characterization of actual forensic casework samples convincingly shows that this technique can handle the chemical diversity encountered in forensic explosive investigations. The detailed chemical information contained in the 1350-2550 nm NIR reflectance spectrum allows for correct compound identification within a given class of energetic materials, including nitro-aromatics, nitro-amines, nitrate esters, and peroxides. In addition, the detailed characterization of mixtures of energetic materials, such as plastic formulations containing PETN (pentaerythritol tetranitrate) and RDX (trinitro triazinane), is feasible. The results presented illustrate that the NIR spectra of energetic compounds and mixtures are sufficiently selective to prevent false-positive results for a broad range of food-related products, household chemicals, raw materials used for the production of home-made explosives, drugs of abuse, and products that are sometimes used to create hoax improvised explosive devices. However, for frequently encountered pyrotechnic mixtures, such as black powder, flash powder, and smokeless powder, and some basic inorganic raw materials, the application of NIR spectroscopy remains challenging. Another challenge is presented by casework samples of contaminated, aged, and degraded energetic materials or poor-quality HMEs (home-made explosives), for which the spectral signature deviates significantly from the reference spectra, potentially leading to false-negative outcomes.

Plasmonic Sensors for Monitoring Biological and Chemical Threat Agents

Sensors are excellent options owing to their ability to figure out a large number of problems and challenges in several areas, including homeland security, defense, medicine, pharmacology, industry, environment, agriculture, food safety, and so on. Plasmonic sensors are used as detection devices that have important properties, such as rapid recognition, real-time analysis, no need labels, sensitive and selective sensing, portability, and, more importantly, simplicity in identifying target analytes. This review summarizes the state-of-art molecular recognition of biological and chemical threat agents. For this purpose, the principle of the plasmonic sensor is briefly explained and then the use of plasmonic sensors in the monitoring of a broad range of biological and chemical threat agents is extensively discussed with different types of threats according to the latest literature. A conclusion and future perspectives are added at the end of the review.

A portable and high-sensitivity optical sensing system for detecting fluorescently labeled enterohaemorrhagic Escherichia coli Shiga toxin 2B-subunit

We developed a stand-alone, real-time optical detection device capable of reading fluorescence intensities from cell samples with high sensitivity and precision, for use as a portable fluorescent sensor for sensing fluorescently labeled enterohemorrhagic Escherichia coli (EHEC) Shiga toxins (Stxs). In general, the signal intensity from the fluorescently labeled Stxs was weak due to the small number of molecules bound to each cell. To address this technical challenge, we used a highly sensitive light detector (photomultiplier tube: PMT) to measure fluorescence, and designed a portable optical housing to align optical parts precisely; the housing itself was fabricated on a 3D printer. In addition, an electric circuit that amplified PMT output was designed and integrated into the system. The system shows the toxin concentration in the sample on a liquid crystal display (LCD), and a microcontroller circuit is used to read PMT output, process data, and display results. In contrast to other portable fluorescent detectors, the system works alone, without any peripheral computer or additional apparatus; its total size is about 17 × 13 × 9 cm³, and it weighs about 770 g. The detection limit was 0.01 ppm of Alexa Fluor 488 in PBS, which is ten thousand times lower than those of other smartphone-based systems and sufficiently sensitive for use with a portable optical detector. We used the portable real-time optical sensing system to detect Alexa Fluor 488–tagged Stx2B-subunits bound to monocytic THP-1 cells expressing the toxin receptor globotriaosylceramide (Gb3). The device did not detect a signal from Gb3-negative PD36 cells, indicating that it was capable of specifically detecting Stxs bound to cells expressing the toxin receptor. Following the development of a rapid and autonomous method for fluorescently tagging cells in food samples, the optical detection system described here could be used for direct detection of Shiga toxins in food in the field.

Perylene Bisimide Derivative-Based Fluorescent Film Sensors: From Sensory Materials to Device Fabrication

Film-based fluorescent sensors have become an important field of sensor research due to abundant acquirable signals, real-time monitoring, and ease of miniaturization and integration, where chemically sensitive films are the most vital component of the sensor devices. In this feature article, we introduce hardware structures of film-based fluorescent sensors following the examination/investigation of the recent progress of such sensors with perylene bisimide (PBI) derivatives as sensing fluorophores in the films. PBI derivatives were specially chosen because of their outstanding chemical, photochemical, and thermal stabilities as well as their unusual high-fluorescence quantum yields. And finally, we provide a prediction for the future developments and challenges of this emerging field.

Structural diversity of Zn(ii) based coordination polymers constructed from a flexible carboxylate linker and pyridyl co-linkers: fluorescence sensing of nitroaromatics

Five new Zn(ii) based coordination polymers have been synthesized that were used in the sensing of nitroaromatic compounds via luminescence quenching.

A fluorescent metal-organic framework for highly selective detection of nitro explosives in the aqueous phase

Selective and sensitive nitro explosive detection by a porous luminescent metal-organic framework has been reported. For the first time MOF based selective explosive detection in the presence of other nitro analytes in aqueous media is demonstrated.

Explosive and chemical threat detection by surface-enhanced Raman scattering: a review

Acts of terror and warfare threats are challenging tasks for defense agencies around the world and of growing importance to security conscious policy makers and the general public. Explosives and chemical warfare agents are two of the major concerns in this context, as illustrated by the recent Boston Marathon bombing and nerve gas attacks on civilians in the Middle East. To prevent such tragic disasters, security personnel must be able to find, identify and deactivate the threats at multiple locations and levels. This involves major technical and practical challenges, such as detection of ultra-low quantities of hazardous compounds at remote locations for anti-terror purposes and monitoring of environmental sanitation of dumped or left behind toxic substances and explosives. Surface-enhanced Raman scattering (SERS) is one of todays most interesting and rapidly developing methods for label-free ultrasensitive vibrational "fingerprinting" of a variety of molecular compounds. Performance highlights include attomolar detection of TNT and DNT explosives, a sensitivity that few, if any, other technique can compete with. Moreover, instrumentation needed for SERS analysis are becoming progressively better, smaller and cheaper, and can today be acquired for a retail price close to 10,000 US$. This contribution aims to give a comprehensive overview of SERS as a technique for detection of explosives and chemical threats. We discuss the prospects of SERS becoming a major tool for convenient in-situ threat identification and we summarize existing SERS detection methods and substrates with particular focus on ultra-sensitive real-time detection. General concepts, detection capabilities and perspectives are discussed in order to guide potential users of the technique for homeland security and anti-warfare purposes.

Aqueous phase selective detection of 2,4,6-trinitrophenol using a fluorescent metal–organic framework with a pendant recognition site

A metal–organic framework with a pendant Lewis basic recognition site was employed to achieve selective detection of the nitro explosive TNP in the aqueous phase.

Coupling paper-based microfluidics and lab on a chip technologies for confirmatory analysis of trinitro aromatic explosives

A new microfluidic paper-based analytical device (μPAD) in conjunction with confirmation by a lab on chip analysis was developed for detection of three trinitro aromatic explosives. Potassium hydroxide was deposited on the μPADs (0.5 μL, 1.5 M), creating a color change reaction when explosives are present, with detection limits of approximately 7.5 ± 1.0 ng for TNB, 12.5 ± 2.0 ng for TNT and 15.0 ± 2.0 ng for tetryl. For confirmatory analysis, positive μPADs were sampled using a 5 mm hole-punch, followed by extraction of explosives from the punched chad in 30 s using 20 μL borate/SDS buffer. The extractions had efficiencies of 96.5 ± 1.7%. The extracted explosives were then analyzed with the Agilent 2100 Bioanalyzer lab on a chip device with minimum detectable amounts of 3.8 ± 0.1 ng for TNB, 7.0 ± 0.9 ng for TNT, and 4.7 ± 0.2 ng for tetryl. A simulated in-field scenario demonstrated the feasibility of coupling the μPAD technique with the lab on a chip device to detect and identify 1 μg of explosives distributed on a surface of 100 cm(2).

A portable explosive detector based on fluorescence quenching of pyrene deposited on coloured wax-printed μPADs

A new technique for the detection of explosives has been developed based on fluorescence quenching of pyrene on paper-based analytical devices (μPADs). Wax barriers were generated (150 °C, 5 min) using ten different colours. Magenta was found as the most suitable wax colour for the generation of the hydrophobic barriers with a nominal width of 120 μm resulting in fully functioning hydrophobic barriers. One microliter of 0.5 mg mL(-1) pyrene dissolved in an 80:20 methanol-water solution was deposited on the hydrophobic circle (5 mm diameter) to produce the active microchip device. Under ultra-violet (UV) illumination, ten different organic explosives were detected using the μPAD, with limits of detection ranging from 100-600 ppm. A prototype of a portable battery operated instrument using a 3 W power UV light-emitting-diode (LED) (365 nm) and a photodiode sensor was also built and evaluated for the successful automatic detection of explosives and potential application for field-based screening.