Room temperature synthesis of PbSe quantum dots in aqueous solution: stabilization by interactions with ligands

Mitotic effects of copper oxide nanoparticle on root development and root tip cells of Phaseolus vulgaris L. seeds

Copper oxide nanoparticle (CuO NP) is used widely in many fields in nanotechnology. For this reason, both production, use, and release to the environment are increasing with each passing day. With the increased use of products that contain nanoparticles (NP) (<100 nm), plants and organisms that constitute the food chain are at risk. In the present study, Phaseolus vulgaris L., a very common food plant, was exposed to metal-based CuO NPs. The anomalies that were caused by CuO NP in germination and mitosis of P. vulgaris were investigated. In the trials, a total of 4 groups (Control, 50, 150, and 300 ppm) were formed and examined in three replications. The determination of the accumulation and elimination rate because of NPs in P. vulgaris that was used in the study was made through X-ray diffraction (XRD), scanning electron microscope (SEM), mapping image, and EDX characteristic spectrum analysis. Also, the mitotic effects on germination, root development, and root tip cells of seeds that were grown by treatment with control, 50, 150, and 300 ppm concentrations were investigated. The study was conducted in three replications in a laboratory setting. All concentrations of CuO NPs caused significant decreases in the mitotic index in the root tip cells of P. vulgaris when compared to the control. The mitotic index reached the lowest level, especially at the highest concentration. Multiple analyzes in the study showed that CuO NPs cause abnormalities in cell division such as C-metaphase, distorted metaphase, distorted anaphase and telophase, chromosome breakage, asynchronous division, advanced chromosomes, micronucleus, and loss of genetic material. These findings also support that the Cytogenetic Test of P. vulgaris can be used to evaluate the genotoxicity of new nanomaterials that are used in many consumer products. In this respect, NPs that are taken up by the organisms in the food chain may pose a danger to higher consumer organisms when they accumulate in the tissue. A control mechanism must be established for the use and contamination of these particles and wider studies must be conducted regarding their effects. HIGHLIGHTS: The effects of CuO nanoparticle, which has a very wide usage area, on root development and mitosis of Phaseolus vulgaris L. plant were investigated in the study. The abnormalities of mitotic division on interphase, prophase, metaphase, anaphase, and telophase were visualized. Evaluation was made considering scanning electron microscopy (SEM) and X-ray diffraction (XRD) results as well.

An Evaluation Research About Effects of Characterized Cadmium Selenide (CdSe) and Lead Selenide (PbSe) Quantum Dots on Brine Shrimp (Artemia salina)

Quantum dots (QDs), such as cadmium selenide (CdSe) and lead selenide (PbSe) exhibit excellent optical, magnetic and chemical properties due to their extremely size (ca. 1-10 nm) and are attractive semiconductor nanomaterials for optical studies and energy storage. In this study, aqueous synthesis of CdSe and PbSe QDs in a size range of 2-10 nm was described. Synthesized QDs were characterized using SEM and TEM, DLS, zeta potential, FTIR, EDX and XRD. Highest accumulation (72.5 ± 5.8 mg L^-1) of PbSe QDs occurred at 10 ppm suspensions. In general accumulation increased up to 48 h exposure then fluctuate tended to decline. For CdSe QDs, accumulation tended to decrease for 72 h exposure except that for 5 ppm groups. For the elimination period, in general, the elimination levels of PbSe and CdSe QDs from exposed individuals decreased (p < 0.05) even it has some fluctuate.

Effects of Zn and ZnO Nanoparticles on Artemia salina and Daphnia magna Organisms: Toxicity, Accumulation and Elimination

In the study, Zn in the size of 40-60 nm and 80-100 nm and ZnO in the size of 10-30 nm were applied to A. salina and D. magna individuals in 7 groups with 3 repetitions. Measurements were made at 24^th, 48^th and 72^nd hours and elimination values were examined at +24 h. LC₅₀ values of NPs were determined and chemical analysis (metal accumulation and elimination), ion quantities which were given to the environment and the survival rates of organisms were determined after the exposure. According to the results of phase contrast microscopy, it was found that both experimental organisms absorbed the NPs in the medium level. In the toxicity results of D. magna, it can be said that Zn NP (40-60 nm) has a highly toxic effect only at 50 ppm concentration for 48 h and lethal dose can be accepted as of 5 ppm at the end of 72 h. In A. salina individuals, it is clearly seen that there is an increase in mortality in organisms parallel to the dose increase. Although all NPs were applied to organisms in low doses corresponding to environmental values, it was observed that toxic effect was in parallel with the increase in time. It is clearly known that there is the inverse proportion between the size of NPs and the toxic effect. The smaller the size of NPs is, the higher the toxic effect becomes When the results of Zn accumulation and elimination of A. salina and D. magna individuals exposed to the Zn and ZnO NPs were examined; it was found that accumulation and elimination occurred in parallel with the increase in concentration at each application hour and elimination. Intensive and possible misuse of nanoscale materials is one of the biggest threats to the environment and all living things worldwide.

The interactions of CdTe quantum dots with serum albumin and subsequent cytotoxicity: the influence of homologous ligands

With spreading applications of fluorescent quantum dots (QDs) in biomedical fields in recent years, there is increasing concern over their toxicity. Among various factors, surface ligands play critical roles. Previous studies usually employed QDs with different kinds of surface ligands, but general principles were difficult to be obtained since it was hard to compare these surface ligands with varied chemical structures without common features. Herein, the physicochemical properties of two types of CdTe QDs were kept very similar, but different in the surface ligands with mercaptoacetic acid (TGA) and 3-mercaptopropionic acid (MPA), respectively. These two types of homologous ligands only had a difference in one methylene group (-CH2-). The interactions of the two types of CdTe QDs with bovine serum albumin (BSA), which was one of the main components of cell culture, were studied by fluorescence, UV-vis absorption, and circular dichroism spectroscopy. It was found that the fluorescence quenching of BSA by CdTe QDs followed a static quenching mechanism, and there was no obvious difference in the Stern-Volmer quenching constants and binding constants. The thermodynamic parameters of the two types of QDs were similar. BSA underwent conformational changes upon association with these QDs. By comparing the cytotoxicity of these two types of QDs, TGA-capped QDs were found to be less cytotoxic than MPA-capped QDs. Besides, in the presence of serum proteins, the cytotoxicity of the QDs was reduced. QDs in the absence of serum proteins had a higher internalization efficiency, compared with those in the medium with serum. To the best of our knowledge, this is a rare study focusing on surface ligands with such small variations at the biomolecular and cellular levels. These findings can provide new insights for the design and applications of QDs in complex biological media.

High magnetic relaxivity in a fluorescent CdSe/CdS/ZnS quantum dot functionalized with MRI contrast molecules

Fluorescent quantum dots functionalized with Gd(iii) MRI contrast agents produce an unprecedentedly high T₁ relaxivity per particle (6800 mM⁻¹ s⁻¹).

Förster resonance energy transfer properties of a new type of near-infrared excitation PDT photosensitizer: CuInS2/ZnS quantum dots-5-aminolevulinic acid conjugates

Recently, near-infrared (NIR) excitation has been suggested for PDT improvement and therapy of cancer.

High performance solution-processed infrared photodetector based on PbSe quantum dots doped with low carrier mobility polymer poly(N-vinylcarbazole)

Narrow band-gap colloidal quantum dots (CQDs) are promising materials for flexible electronic, such as infrared light photodetectors and solar cells.

Size and Energy Level Tuning of Quantum Dot Solids via a Hybrid Ligand Complex

The performance of quantum dots (QDs) in optoelectronic devices suffers as a result of sub-bandgap states induced by the large fraction of atoms on the surface of QDs. Recent progress in passivating these surface states with thiol ligands and halide ions has led to competitive efficiencies. Here, we apply a hybrid ligand mixture to passivate PbSe QD sub-bandgap tail states via a low-temperature, solid-state ligand exchange. We show that this ligand mixture allows tuning of the energy levels and the physical QD size in the solid state during film formation. We hereby present a novel, postsynthetic path to tune the properties of QD films.

Cytocompatibility of direct water synthesized cadmium selenide quantum dots in colo-205 cells

Cadmium selenide quantum dots (CdSe QDs), inorganic semiconducting nanocrystals, are alluring increased attraction due to their highly refined chemistry, availability, and super tunable optical properties suitable for many applications in different research areas, such as photovoltaics, light-emitting devices, environmental sciences, and nanomedicine. Specifically, they are being widely used in bio-imaging in contrast to organic dyes due to their high brightness and improved photo-stability, and their ability to tune their absorption and emission spectra upon changing the crystal size. The production of CdSe QDs is mostly assisted by trioctylphosphine oxide compound, which acts as solvent or solubilizing agent and renders the QDs soluble in organic compounds (such as toluene, chloroform, and hexane) that are highly toxic. To circumvent the toxicity-related factor in CdSe QDs, we report the synthesis of CdSe QDs capped with thioglycolic acid (TGA) in an aqueous medium, and their biocompatibility in colo-205 cancer cells. In this study, the [Cd²⁺]/[TGA] ratio was adjusted to 11:1 and the Se concentration (10 and 15 mM) was monitored in order to evaluate its influence on the optical properties and cytocompatibility. QDs resulted to be quite stable in water (after purification) and RPMI cell medium and no precipitation was observed for long contact times, making them appealing for in vitro experiments. The spectroscopy analysis, advanced electron microscopy, and X-ray diffractometry studies indicate that the final products were successfully formed exhibiting an improved optical response. Colo-205 cells being exposed to different concentrations of TGA-capped CdSe QDs for 12, 24, and 48 h with doses ranging from 0.5 to 2.0 mM show high tolerance reaching cell viabilities as high as 93 %. No evidence of cellular apoptotic pathways was observed as pointed out by our Annexin V assays at higher concentrations. Moreover, confocal microscopy analysis conducted to evaluate the intracellular uptake of TGA-CdSe QDs reveal that the TGA-CdSe QDs were uniformly distributed within the cytosolic side of cell membranes. Our results also suggest that under controlled conditions, direct water-soluble TGA-CdSe QDs can be potentially employed for bio-imaging colo-205 cancer cells with minimal adverse effects.

Optimizing the deposition of CdSe colloidal quantum dots on TiO2 film electrode via capping ligand induced self-assembly approach

The influences of experimental parameters in the process of CdSe QD deposition via a capping ligand-induced self-assembly method on the QD loading and the performance of the resultant cell devices have been systematically investigated and optimized.

Rapid synthesis of NADPH responsive CdSe quantum dots from selenium nanoparticles

Herein we developed a new approach for CdSe quantum dots (QDs) synthesis.

Silica encapsulation of thiol-stabilized lead selenide (PbSe) quantum dots in aqueous solution

Silica encapsulation of lead selenide quantum dots (PbSe QDs) in aqueous solution is reported. Thioglycolic acid (TGA) stabilized PbSe QDs were modified with 3-mercaptopropyl trimethoxysilane (MPS) through vigorous stirring in water for 18-24 h in alkaline solution (pH 10.4-10.6). Silica shell was developed by controlled deposition and precipitation of silicates from sodium silicate solution onto MPS modified QDs surfaces. TEM images showed multiple PbSe QDs encapsulated in silica shell. The size of PbSe-SiO₂ core-shell nanocrystals was estimated to be 25-30 nm by TEM. Elemental compositions (Pb, Se and Si) were investigated by EDX analysis. The purified colloids of PbSe-SiO₂ QDs were stable for months when kept at 4 °C.