Advances on fluorescence chemosensors for selective detection of water

Water, although an important part of everyday life, is acts as one of the most significant contaminants in various applications such as biomedical monitoring, chemical production, petroleum-based fuel and food processing. In fact, the presence of water in other solvents is a huge concern. For the quantification of trace water content, different methods such as Karl-Fischer, electrochemical, nuclear magnetic resonance, chromatography, and thermogravimetric analysis have been used. Although every technique has its own benefit, each one suffers from several drawbacks that include high detection costs, lengthy procedures and specialized operations. Nowadays, the development of fluorescence-based chemical probes has become an exciting area of research for the quick and accurate estimation of water content in organic solvents. A variety of chemical processes such as hydrolysis reaction, metal ions promoted oxidation reaction, suppression of the -C═N isomerization, protonation and deprotonation reactions, and molecular aggregation have been well researched in the last few years for the fluorescent detection of trace water. These chemical processes eventually lead to different photophysical events such as aggregation-induced emission (AIE), aggregation-induced emission enhancement (AIEE), aggregation-caused quenching (ACQ), fluorescent resonance energy transfer (FRET), charge transfer, photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT) that are responsible for the detection. This review presents a summary of the fluorescence-based chemosensors reported in recent years. The design of water sensors, sensing mechanisms and their potential applications are reviewed and discussed.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Current and Future of "Turn-On" Based Small-Molecule Copper Probes for Cuproptosis

Increasing evidence shows that abnormal copper (Cu) metabolism is highly related to many diseases, such as Alzheimer's disease, Wilson's disease, hematological malignancies and Menkes disease. Very recently, cuproptosis, a Cu-dependent, programmed cell death was firstly described by Tsvetkov et al. in 2022. Their findings may provide a new perspective for the treatment of related diseases. However, the concrete mechanisms of these diseases, especially cuproptosis, remain completely unclear, the reason of which may be a lack of reliable tools to conduct highly selective, sensitive and high-resolution imaging of Cu in complex life systems. So far, numerous small-molecular fluorescent probes have been designed and utilized to explore the Cu signal pathway. Among them, fluorescence turn-on probes greatly enhance the resolution and accuracy of imaging and may be a promising tool for research of investigation into cuproptosis. This review summarizes the probes developed in the past decade which have the potential to study cuproptosis, focusing on the design strategies, luminescence mechanism and biological-imaging applications. Besides, we put forward some ideas concerning the design of next-generation probes for cuproptosis, aiming to tackle the main problems in this new field. Furthermore, the prospect of cuproptosis in the treatment of corresponding diseases is also highlighted.

Development in Fluorescent OFF-ON Probes Based on Cu2+ Promoted Hydrolysis Reaction of the Picolinate Moiety

Anions and cations have a key role in our normal life. Cu²⁺ ion is a crucial trace element accountable for the part of several cellular enzymes and proteins, including cytochrome c oxidase, dopamine monooxygenase, Cu/Zn superoxide dismutase, and ceruloplasmin. WHO has found the extreme acceptable level of Cu²⁺ ions in drinking water is up to 2.0 ppm. Excess use of Cu²⁺ ions is associated with various human genetic disorders. Thus, the visualization of Cu²⁺ ions to avoid its toxic effects in chemical and biological systems is significant. In this review we have summarized sensors based on catalytic hydrolysis of picolinate to detect Cu²⁺ ions. The sensors based on hydrolysis of picolinate are very selective as compared to the other sensors for Cu²⁺ ions detection. We have focused on describing the structure, spectral properties, detection limits, and bioimaging model of the sensors.

Development of a Fluorescein-Based Probe with an "Off-On" Mechanism for Selective Detection of Copper (II) Ions and Its Application in Imaging of Living Cells

Copper is a common metallic element that plays an extremely essential role in the physiological activities of living organisms. The slightest change in copper levels in the human body can trigger various diseases. Therefore, it is important to accurately and efficiently monitor copper ion levels in the human body. Recent studies have shown that fluorescent probes have obvious advantages in bioimaging and Cu²⁺ detection. Therefore, a novel Cu²⁺ probe (N2) was designed and synthesized from fluorescein, hydrazine hydrate and 5-p-nitrophenylfurfural that is sensitive to and can detect Cu²⁺ within 100 s. The response mechanism of the N2 probe to Cu²⁺ was studied by several methods such as Job's plots and MS analysis, which showed that the Cu²⁺ and the N2 probe were coordinated in a complexation ratio of 1:1. In addition, compared with other cations investigated in this study, the N2 probe showed excellent selectivity and sensitivity to Cu²⁺, exhibiting distinct fluorescence absorption at 525 nm. Furthermore, in the equivalent range of 0.1-1.5, there is a good linear relationship between Cu²⁺ concentration and fluorescence intensity, and the detection limit is 0.10 μM. It is worth mentioning that the reversible reaction between the N2 probe and Cu²⁺, as well as the good biocompatibility shown by the probe in bioimaging, make it a promising candidate for Cu²⁺ biosensor applications.

Hydrazone derivative of 2-hydroxyquinoline-3-carbaldehyde: an efficient anionic and cationic sensor

A hydrazone (1) based on 2-hydroxyquinoline-3-carbaldehyde was synthesized and its anion and cation detection ability were studied. It could detect both fluoride in acetonitrile selectively among anions and copper ions in semiaqueous medium among cations. The addition of fluoride ion to the acetonitrile solution of the receptor produced a sharp colour change from light yellow to bluish green. The corresponding UV–vis measurements showed a red shift of the band of receptor 1 for fluoride and a blue shift of the band for copper ions. The fluorescence intensity of the receptor 1 got quenched with both fluoride and copper ions. The detection limits for both the ions are in order of micromolar level. The practical applications of fluoride detection were extended to oral care products.

A fast, highly selective and sensitive colorimetric and fluorescent sensor for Cu2+ and its application in real water and food samples

A new oligothiophene functionalized Schiff base sensor 3TDC has been successfully designed and synthesized. Sensor 3TDC exhibited "naked-eye" colorimetric and selective "on-off" fluorescence response toward Cu²⁺ with high selectivity and sensitivity within a wide pH range. The binding ratio of the sensor 3TDC and Cu²⁺ was determined to be 1:1 through fluorescence titration, Job's plot, ¹H NMR titration, FTIR and DFT studies. The detection limit is calculated to be as low as 2.81 × 10^-8 M, which is much lower than the allowable level of Cu²⁺ in drinking water set by U.S. Environmental Protection Agency (~20 μM) and the World Health Organization (~30 μM). The binding constant (K_a) of Cu²⁺ to sensor 3TDC was found to be 2.52 × 10⁴ M^-1. Sensor 3TDC for Cu²⁺ detection exhibited fast fluorescence response within 30 s and high anti-interference performance. Moreover, sensor 3TDC could be used as an effective fluorescent sensor for detecting Cu²⁺ ions in various real water and food samples with good accuracy and high precision.

A Dual-Target Fluorescent Probe with Response-Time Dependent Selectivity for Cd2+ and Cu2

A novel fluorescent probe (NT) was developed by merging 2-hydrazinylbenzothiazole with 2-hydroxy-1-naphthaldehyde for the detection of Cd²⁺ and Cu²⁺. The probe alone is almost nonfluorescent due to the isomerization of C=N in the excited state. The addition of Cd²⁺ can cause an immediate strong green fluorescence owing to the suppression of C=N isomerization by Cd²⁺-coordination. Furthermore, NT gives a delayed turn-on fluorescence response to Cu²⁺ although it is a vigorous fluorescence quencher, which was thanks to the inhibition of the electron transfer between excited fluorophore and paramagnetic Cu²⁺ by sulfur donor. Based on fluorescence spectra and ESI-MS analysis, the binding modes between NT and Cd²⁺/Cu²⁺ were proposed.

A new hydroxynaphthyl benzothiazole derived fluorescent probe for highly selective and sensitive Cu(2+) detection

A new reactive probe, 1-(benzo[d]thiazol-2-yl)naphthalen-2-yl-picolinate (BTNP), was designed and synthesized. BTNP acts as a highly selective probe to Cu(2+) in DMSO/H2O (7/3, v/v, Tris-HCl 10mM, pH=7.4) solution based on Cu(2+) catalyzed hydrolysis of the picolinate ester moiety in BTNP, which leads to the formation of an ESIPT active product with dual wavelength emission enhancement. The probe also possesses the advantages of simple synthesis, rapid response and high sensitivity. The pseudo-first-order reaction rate constant was calculated to be 0.205min(-1). Moreover, application of BTNP to Cu(2+) detection in living cells and real water samples was also explored.

Proton donor modulating ESIPT-based fluorescent probes for highly sensitive and selective detection of Cu2+

Two novel ESIPT-based fluorescent probes for Cu²⁺ detection were developed. Altering the linker in probe molecules reversed their sensing behavior. Both probes exhibited high selectivity and sensitivity to Cu²⁺, and can be used for cell imaging.

Coumarin-based fluorescent probes for dual recognition of copper(II) and iron(III) ions and their application in bio-imaging

Two new coumarin-based “turn-off” fluorescent probes, (E)-3-((3,4-dihydroxybenzylidene)amino)-7-hydroxy-2H-chromen-2-one (BS1) and (E)-3-((2,4-dihydroxybenzylidene)amino)-7-hydroxy-2H-chromen-2-one (BS2), were synthesized and their detection of copper(II) and iron(III) ions was studied. Results show that both compounds are highly selective for Cu²⁺ and Fe³⁺ ions over other metal ions. However, BS2 is detected directly, while detection of BS1 involves a hydrolysis reaction to regenerate 3-amino-7-hydroxycoumarin (3) and 3,4-dihydroxybenzaldehyde, of which 3 is able to react with copper(II) or iron(III) ions. The interaction between the tested compounds and copper or iron ions is associated with a large fluorescence decrease, showing detection limits of ca. 10⁻⁵ M. Preliminary studies employing epifluorescence microscopy demonstrate that Cu²⁺ and Fe³⁺ ions can be imaged in human neuroblastoma SH-SY5Y cells treated with the tested probes.

Chemodosimeter approach for nanomolar detection of Cu2+ ions and their bio-imaging in PC3 cell lines

A new rhodamine–azaindole based fluorescence probe for Cu²⁺ has been synthesized which shows fluorescence resonance energy transfer process in acetonitrile. Further, the probe undergoes Cu²⁺ promoted hydrolysis in mixed aqueous media as well as in the intracellular systems.