Molecularly imprinted polymer grafted on paper and flat sheet for selective sensing and diagnosis: a review

Molecularly imprinted polymers are efficient and selective adsorbents which act as artificial receptors for desired compounds with the ability to recognize the size, shape, and functional groups of the compounds simultaneously. A molecularly imprinted polymer is prepared by the polymerization of functional monomers around a template (analyte) molecule. Afterward, the removal of the template from the polymer matrix leaves a selective cavity behind. The fabrication and development of molecularly imprinted polymers grew rapidly, due to their low cost, simple preparation, selectivity, sensitivity, and stable physicochemical properties. Traditionally, molecularly imprinted polymers can be synthesized using two main methods, namely bulk and surface imprinting. For more efficient use of the latter method, researchers have developed molecularly imprinted polymers grafted on the solid-phase matrix (substrate). This grafting technique would be particularly useful for surface imprinting of macromolecules, such as proteins. Cellulose fibers of papers with unique properties such as being abundant, retaining a porous structure, having good adsorption properties, and possessing hydroxyl groups naturally have gained much attention as substrate. The goal of this review is to introduce molecularly imprinted polymer-grafted or molecularly imprinted polymer-coated paper, as an interesting, simple, and efficient method in the detection and separation of small and large molecules. Therefore, in the present paper, several recent preparation techniques and applications of molecularly imprinted polymer-grafted paper are reviewed and discussed in detail. Green, cost-effective, selective, and sensitive paper-based sensor prepared via grafting molecularly imprinted polymer on paper surface with the potential use for online detection trace of analytes in the point-of-care testing.

Hierarchically Imprinted Polymer for Peptide Tag Recognition Based on an Oriented Surface Epitope Approach

FLAG tag (DYKDDDDK) is a short peptide commonly used for the purification of recombinant proteins. The high price of the affinity columns and their limited reusability are a shortcoming for their widespread use in biotechnology applications. Molecularly imprinted polymers (MIPs) can circumvent some of the limitations of bioaffinity columns for such applications, including long-term stability, reusability, and cost. We report herein the synthesis of MIPs selective to the FLAG tag by hierarchical imprinting. Using the epitope imprinting approach, a 5-amino acid peptide DYKDC was selected as a template and was covalently immobilized on the surface of microporous silica beads, previously functionalized with different aminosilanes, namely, 3-(2-aminoethylamino)propyldimethoxymethylsilane, AEAPMS, and N-(2-aminoethyl)-2,2,4-trimethyl-1-aza-2-silacyclopentane, AETAZS. We investigated the effect of the type of silane on the production of homogeneous silane-grafted layers with the highest extent of silanol condensation as possible using ²⁹Si CP/MAS NMR. We observed that the right orientation of the imprinted cavities can substantially improve analyte recoveries from the MIP. After template and silica removal, the DYKDC-MIPs were used as sorbents for solid-phase extraction (molecularly imprinted solid-phase extraction) of the FLAG peptide, showing that the polymer prepared with AETAZS-bound silica beads contained binding sites more selective to the tag (R_MIP-AZA = 87.4% vs R_NIP-AZA = 4.1%, n = 3, RSD ≤ 4.2%) than those prepared using AEAPMS (R_MIP-DM = 73.4% vs R_NIP-DM = 23.2%, n = 3, RSD ≤ 4.0%) as a functionalization agent. An extensive computational molecular modeling study was also conducted, shedding some light on the interaction mechanism between the FLAG peptide and the imprinted template in the binding cavities.

Synthesis and characterization of paclitaxel-imprinted microparticles for controlled release of an anticancer drug

In this study, novel molecularly imprinted polymer (MIP) microparticles containing methacryl polyhedral oligomeric silsesquioxane (M-POSS) were synthesized through the RAFT precipitation polymerization (RAFTPP) method using paclitaxel (PTX) as the templates. During the course of this investigation, methacrylic acid (MAA) was used as the functional monomer, while ethylene glycol dimethacrylate (EGDMA) was utilized as a cross-linker. The effects of different molar ratios of M-POSS on the microparticles were characterized. The obtained MIP microparticles were confirmed by FT-IR and TGA-DSC. The results of SEM showed regular spherical-shaped MIP microparticles with diameters around 170-490 nm. The PTX loading quantity was closely correlated with the content of M-POSS, and the MIP microparticles showed a satisfactory affinity to PTX with high drug loading (17.1%) and encapsulation efficiency (85.5%). Moreover, these MIP microparticles were sensitive to pH, and consequently the release rates of PTX at pH 5 were much faster than those at pH 7 due to the acid cleavage of the hydrogen bonds. In addition, the results from release experiments of the MIP microparticles showed a very slow and controlled release of PTX, which heralded promising potential as a carrier for PTX delivery in cancer therapy.

Exploring the peptide retention mechanism in molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have been used as useful sorbents in solid-phase extraction for a wide range of molecules and sample matrices. Their unique selectivity can be fine-tuned in the imprinting process and is crucial for the extraction of macromolecules from complex matrices such as serum. A relevant example of this is the application of MIPs to peptides in diagnostic assays. In this article the selectivity of MIPs, previously implemented in a quantitative mass-spectrometric assay for the biomarker pro-gastrin-releasing peptide, is investigated. Partial least squares regression was used to generate models for the evaluation and prediction of the retention mechanism of MIPs. A hypothesis on interactions of MIPs with the target peptide was verified by ad hoc experiments considering the relevant peptide physicochemical properties highlighted from the multivariate analysis. Novel insights into and knowledge of the driving forces responsible for the MIP selectivity have been obtained and can be directly used for further optimization of MIP imprinting strategies. Graphical Abstract Applied analytical strategy: the Solid Phase Extraction (SPE) of digested Bovin Serum Albumin (BSA), using Molecularly Imprinted Polymers (MIP), is followed by the liquid chromatography-mass spectrometry (LC-MS) analysis for the identification of the retained peptides. The further application of multivariate analysis allows setting up a Partial Least Square (PLS) model, which describes the peptide retention into the MIP and gives additional knowledge to be used in the optimization of the MIP and the whole SPE method.

Hierarchically templated beads with tailored pore structure for phosphopeptide capture and phosphoproteomics

Phosphotyrosine selective beads prepared by polymer templating at two length scales results in improved capture of larger sized peptide fragments from tryptic protein digests.

Molecularly Imprinted Polymers for the Identification and Separation of Chiral Drugs and Biomolecules

Molecularly imprinting polymers (MIPs) have been extensively applied in chromatography for the separation of chiral drugs. In this review, we mainly summarize recent developments of various MIPs used as chiral stationary phases (CSPs) in high performance liquid chromatography (HPLC), capillary electrochromatography (CEC), and supercritical fluid chromatography (SFC). Among them, HPLC has the advantages of straightforward operation and high selectivity. However, the low separation efficiency, due to slow interaction kinetics and heavy peak broadening, is the main challenge for the application of MIPs in HPLC. On the other hand, CEC possesses both the high selectivity of HPLC and the high efficiency of capillary electrophoresis. In CEC, electroosmotic flow is formed across the entire column and reduces the heavy peak broadening observed in HPLC mode. SFC can modify the low interaction kinetics in HPLC when supercritical fluids are utilized as mobile phases. If SFC and MIP-based CSPs can be well combined, better separation performance can be achieved. Particles, monoliths and membrane are typical formats of MIPs. Traditional MIP particles produced by bulk polymerization have been replaced by MIP particles by surface imprinting technology, which are highly consistent in size and shape. Monolithic MIPs are prepared by in situ method in a column, greatly shortening the pre-preparation time. Some novel materials, such as magnetic nanoparticles, are integrated into the MIPs to enhance the controllability and efficiency of the polymerization. This review will be helpful to guide the preparation, development, and application of MIPs in chromatographic and electrophoretic enantioseparation.

Analytical applications of MIPs in diagnostic assays: future perspectives

Many efforts have been made to produce artificial materials with biomimetic properties for applications in binding assays. Among these efforts, the technique of molecular imprinting has received much attention because of the high selectivity obtainable for molecules of interest, robustness of the produced polymers, simple and short synthesis, and excellent cost efficiency. In this review, progress in the field of molecularly imprinted sorbent assays is discussed-with a focus on work conducted from 2005 to date.

Functional Interfaces Constructed by Controlled/Living Radical Polymerization for Analytical Chemistry

The high-value applications of functional polymers in analytical science generally require well-defined interfaces, including precisely synthesized molecular architectures and compositions. Controlled/living radical polymerization (CRP) has been developed as a versatile and powerful tool for the preparation of polymers with narrow molecular weight distributions and predetermined molecular weights. Among the CRP system, atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain transfer (RAFT) are well-used to develop new materials for analytical science, such as surface-modified core-shell particles, monoliths, MIP micro- or nanospheres, fluorescent nanoparticles, and multifunctional materials. In this review, we summarize the emerging functional interfaces constructed by RAFT and ATRP for applications in analytical science. Various polymers with precisely controlled architectures including homopolymers, block copolymers, molecular imprinted copolymers, and grafted copolymers were synthesized by CRP methods for molecular separation, retention, or sensing. We expect that the CRP methods will become the most popular technique for preparing functional polymers that can be broadly applied in analytical chemistry.

A new magnetic tailor made polymer for separation and trace determination of cadmium ions by flame atomic absorption spectrophotometry

Magnetic ion imprinted polymers have been prepared and applied for the selective extraction and trace monitoring of cadmium ions in food samples.

Monoclonal antibody capture from cell culture supernatants using epitope imprinted macroporous membranes

A straightforward epitope imprinting procedure is used to prepare IgG affinity membranes directly applicable to mAb capture under near process realistic conditions.

Current trends in the development of molecularly imprinted polymers in CEC

This review focused on the developments in the field of molecularly imprinted polymers (MIPs) for CEC since 2009. New preparation techniques of MIP-based CEC, such as, portable microchip with macroporous monolithic imprinted microchannel, and low cross-linking MIPs based on liquid crystalline monomers, were discussed. Using selected cases rather than a comprehensive review of the entire field, our goal is to highlight the studies of the interest with an emphasis on recent work, and offers suggestions for future development in the field of imprinted materials for CEC separation.

Insights into the formation, structural properties and performance of RAFT polymerized l-phenylalanine anilide molecularly imprinted polymers

The enhanced performance of molecularly imprinted polymers prepared by controlled radical polymerization in terms of affinity, selectivity, capacity and mass transfer properties is shown here to correlate with pore structure parameters in their dry and swollen states.

Productive encounter: molecularly imprinted nanoparticles prepared using magnetic templates

Synthesis of core–shell nanoparticles in presence of a chiral template conjugated to magnetic particles leads to imprinted nanoparticles featuring enhanced affinity compared to nanoparticles prepared using free template.

Synthesis of Surface Imprinted Polymer Microspheres with Ultrathin Polymer Shells via Surface-Initiated Iniferter Polymerization

A simple and effective approach was proposed to synthesize uniform surface imprinted polymer microspheres via surface-initiated iniferter polymerization. The chloromethyl groups were firstly introduced onto the surface of the polystyrene microspheres by a one-step dispersion polymerization. After that the photosensitive iniferter groups were modified by the reaction of the polystyrene microspheres surface-bound chloromethyl groups with N, N-diethyldithiocarbamate sodium. The grafting step was then carried out in a stirred solution of polystyrene microspheres containing surface-initiated iniferter in the presence of template molecules (glutathione, GSH), functional and cross-linking monomers. The synthesized surface imprinted polymer (GSH-MIP) microspheres were characterized using SEM and FT-IR. The GSH-MIP microspheres were spherical in shape, and showed homogeneous polymer layer and high encapsulation efficiency. The rebinding properties of GSH for GSH-MIP was evaluated by carrying out batch rebinding tests, the obtained GSH-MIP shows faster mass transfer and higher binding amounts rate toward template than non-imprinted polymer (NIP).