Degradable polyprodrugs: design and therapeutic efficiency

Prodrugs are developed to increase the therapeutic properties of drugs and reduce their side effects. Polyprodrugs emerged as highly efficient prodrugs produced by the polymerization of one or several drug monomers. Polyprodrugs can be gradually degraded to release therapeutic agents. The complete degradation of polyprodrugs is an important factor to guarantee the successful disposal of the drug delivery system from the body. The degradation of polyprodrugs and release rate of the drugs can be controlled by the type of covalent bonds linking the monomer drug units in the polymer structure. Therefore, various types of polyprodrugs have been developed based on polyesters, polyanhydrides, polycarbonates, polyurethanes, polyamides, polyketals, polymetallodrugs, polyphosphazenes, and polyimines. Furthermore, the presence of stimuli-responsive groups, such as redox-responsive linkages (disulfide, boronate ester, metal-complex, and oxalate), pH-responsive linkages (ester, imine, hydrazone, acetal, orthoester, P-O and P-N), light-responsive (metal-complex, o-nitrophenyl groups) and enzyme-responsive linkages (ester, peptides) allow for a selective degradation of the polymer backbone in targeted tumors. We envision that new strategies providing a more efficient synergistic therapy will be developed by combining polyprodrugs with gene delivery segments and targeting moieties.

Chain-Shattering Polymers as Degradable Microdispersive Solid-Phase Extraction Sorbents

A chain-shattering polymer (CSP) has been proposed as a microdispersive solid-phase extraction (μdSPE) sorbent in a proof-of-concept study of degradable materials for analytical purposes. The responsive CSP was synthesized from 1,3,5-tris(bromomethyl)-2-nitrobenzene acting as the self-immolative trigger responsive unit and 2,6-naphthalenedicarboxylic acid as aromatic linker to enhance noncovalent aromatic interactions with the analytes. The CSP was characterized and applied as a μdSPE sorbent of a group of plasticizers, which were selected as model analytes, from different types of environmental water samples (tap, waste, and spring waters). Gas chromatography coupled to mass spectrometry detection was used for analyte determination. Mean recovery values were in the range of 80%–118% with RSD values below 22%. After the extraction, the polymer could be efficiently degraded by UV irradiation or by chemical reduction, recovering the aromatic linker. This work has proved the potential of CSPs as recyclable sorbents, paving the way to more environmentally benign analytical procedures.

Recent advances in self-immolative linkers and their applications in polymeric reporting systems

Interest in self-immolative chemistry has grown over the past decade with more research groups harnessing the versatility to control the release of a compound from a larger chemical entity, given...

Self-Immolative Polymers: An Emerging Class of Degradable Materials with Distinct Disassembly Profiles

Self-immolative polymers are an emerging class of macromolecules with distinct disassembly profiles that set them apart from other general degradable materials. These polymers are programmed to disassemble spontaneously from head to tail, through a domino-like fragmentation, upon response to extremal stimuli. In the time since we first reported this unique type of molecule, several groups around the world have developed new, creative molecular structures that perform analogously to our pioneering polymers. Self-immolative polymers are now widely recognized as an important class of stimuli-responsive materials for a wide range of applications such as signal amplification, biosensing, drug delivery, and materials science. The quinone-methide elimination was shown to be an effective tool to achieve rapid domino-like fragmentation of polymeric molecules. Thus, numerous applications of self-immolative polymers are based on this disassembly chemistry. Although several other fragmentation reactions achieved the function requested for sequential disassembly, we predominantly focused in this Perspective on examples of self-immolative polymers that disassemble through the quinone-methide elimination. Selected examples of self-immolative polymers that disassembled through other chemistries are briefly described. The growing demand for stimuli-responsive degradable materials with novel molecular backbones and enhanced properties guarantees the future interest of the scientific community in this unique class of polymers.

Base-triggered self-amplifying degradable polyurethanes with the ability to translate local stimulation to continuous long-range degradation

A new type of base-triggered self-amplifying degradable polyurethane is reported that degrades under mild conditions, with the release of increasing amounts of amine product leading to self-amplified degradation. The polymer incorporates a base-sensitive Fmoc-derivative into every repeating unit to enable highly sensitive amine amplified degradation. A sigmoidal degradation curve for the linear polymer was observed consistent with a self-amplifying degradation mechanism. An analogous cross-linked polyurethane gel was prepared and also found to undergo amplified breakdown. In this case, a trace amount of localized base initiates the degradation, which in turn propagates through the material in an amplified manner. The results demonstrate the potential utility of these new generation polyurethanes in enhanced disposability and as stimuli responsive materials.

Construction from destruction using a photo-triggered self-propagating degradable polyurethane as a one-pot epoxy

We report a photo-triggered, base generating, base propagating degradable polyurethane that is triggered by 365 nm UV light irradiation.

Self-immolative polymers in biomedicine

Biomedical use cases for self-immolative polymers.

Rapid Degradation of Poly(lactic acid) with Organometallic Catalysts

Poly(lactic acid) (PLA) is an effective sacrificial material for the creation of vascular networks in thermoset polymers and composites. The high thermal stability of PLA limits its applications as an embedded sacrificial template in high-temperature-resistant thermoset matrices. Here, we demonstrate faster and more efficient PLA degradation at temperatures lower than previously reported using two organometallic catalysts: tin(II) oxalate (Sn(Oxa)) and tin(II) acetate (Sn(Ac)₂). We process Sn(Oxa) by two separate methods to obtain a significant difference in the specific surface area (SSA) of the catalyst particles and compare PLA degradation performance in a thermogravimetric analysis (TGA) instrument. Changing the SSA of Sn(Oxa) by a factor of ∼20 reduces the PLA degradation onset temperature by 37 °C. The total degradation time of PLA films also decreases after blending with Sn(Oxa) having a higher SSA. We also find Sn(Ac)₂ lowers the degradation onset of PLA by 53 °C compared to Sn(Oxa) with a similar SSA. In addition, Sn(Ac)₂ decreases the time for complete degradation of PLA films by an order of magnitude compared to Sn(Oxa) at 200 °C. Films with a significantly lower Sn(Ac)₂ concentration compared to Sn(Oxa) degrade much faster at lower temperatures up to 160 °C. Finally, PLA films with different loadings of Sn(Ac)₂ are embedded in an epoxy thermoset matrix and subsequently vascularized at elevated temperatures in a vacuum oven. Microchannel formation is observed at 170 °C using Sn(Ac)₂, reducing the temperature required for vaporization of embedded sacrificial polymer compared to Sn(Oxa) catalyst. Sn(Ac)₂ can potentially reduce the energy, time, and amount of catalyst required for degrading PLA into volatile products for sacrificial applications.

Depolymerization of Bottlebrush Polypentenamers and Their Macromolecular Metamorphosis

The depolymerization of bottlebrush (BB) polymers with varying lengths of polycyclopentene (PCP) backbone and polystyrene (PS) grafts is investigated. In all cases, ring closing metathesis (RCM) depolymerization of the PCP BB backbone appears to occur through an end-to-end depolymerization mechanism as evidenced by size exclusion chromatography. Investigation on the RCM depolymerization of linear PCP reveals a more random chain degradation process. Quantitative depolymerization occurs under thermodynamic conditions (higher temperature and dilution) that drives RCM into cyclopentenes (CPs), each bearing one of the original PS grafts from the BB. Catalyst screening reveals Grubbs' third (G3) and second (G2) generation catalyst depolymerize BBs significantly faster than Grubbs' first generation (G1) and Hoveyda-Grubbs' second generation (HG2) catalyst under identical conditions while solvent (toluene versus CHCl₃) plays a less significant role. The length of the BB backbone and PS side chains also play a minor role in depolymerization kinetics, which is discussed. The ability to completely deconstruct these BB architectures into linear grafts provides definitive insights toward the ATRP "grafting-from" mechanism originally used to construct the BBs. Core-shell BB block copolymers (BBCPs) are shown to quantitatively depolymerize into linear diblock polymer grafts. Finally, the complete depolymerization of BBs into α-cyclopentenyl-PS allows further transformation to other architectures, such as 3-arm stars, through thiol-ene coupling onto the CP end group. These unique materials open the door to stimuli-responsive reassembly of BBs and BBCPs into new morphologies driven by macromolecular metamorphosis.

Logical design and application of prodrug platforms

This review summarizes the current state of prodrugs and elaborates the logical design and future development of the prodrug platform.

Coumarin-Caged Polyphosphazenes with a Visible-Light Driven On-Demand Degradation

Polymers that, upon photochemical activation with visible light, undergo rapid degradation to small molecules are described. Through functionalization of a polyphosphazene backbone with pendant coumarin groups sensitive to light, polymers which are stable in the dark could be prepared. Upon irradiation, cleavage of the coumarin moieties exposes carboxylic acid moieties along the polymer backbone. The subsequent macromolecular photoacid is found to catalyze the rapid hydrolytic degradation of the polyphosphazene backbone. Water-soluble and non-water-soluble polymers are reported, which due to their sensitivity toward light in the visible region could be significant as photocleavable materials in biological applications.

Facile Fabrication of 10-Hydroxycamptothecin-Backboned Amphiphilic Polyprodrug with Precisely Tailored Drug Loading Content for Controlled Release

Polymeric prodrugs with precisely controlled drug loading content (DLC) and rapid intracellular destabilization generally require complicated chemistry that hinders large-scale manufacture. For this purpose, we reported in this study a facile construction of reduction-sensitive amphiphilic polyprodrugs with an anticancer drug, 10-hydroxycamptothecin (HCPT), and a hydrophilic poly(ethylene oxide) (PEG) moiety as the alternating building blocks of the multiblock copolymer using Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAc) click coupling between azide-SS-HCPT-SS-azide and alkyne-PEG-alkyne. Adoption of PEGs with two different molecular weights (MWs) of 400 and 1450 Da (PEG400 and PEG1450) afforded two polyprodrugs with different DLCs. Both formulations can self-assemble into spherical micelles with hydrodynamic diameter smaller than 200 nm, and exhibit glutathione (GSH)-triggered degradation for promoted drug release. A further comparison study revealed that the PEG1450-based polyprodrug is a better formulation than the analogue constructed from PEG400 in terms of in vitro drug release behaviors, and cytotoxicity. This work thus provides a facile yet efficient strategy toward polymeric prodrugs with precisely controlled DLC and reduction-triggered degradation for enhanced anticancer drug delivery.

Cationic Poly(benzyl ether)s as Self-Immolative Antimicrobial Polymers

Self-immolative polymers (SIMPs) are macromolecules that spontaneously undergo depolymerization into small molecules when triggered by specific external stimuli. We report here the first examples of antimicrobial SIMPs with potent, rapid, and broad-spectrum bactericidal activity. Their antibacterial and hemolytic activities were examined as a function of cationic functionality. Polymers bearing primary ammonium cationic groups showed more potent bactericidal activity against Escherichia coli, relative to tertiary and quaternary ammonium counterparts, whereas the quaternary ammonium polymers showed the lowest hemolytic toxicity. These antibacterial polycations undergo end-to-end depolymerization when triggered by an externally applied stimulus. Specifically, poly(benzyl ether)s end-capped with a silyl ether group and bearing pendant allyl side chains were converted to polycations by photoinitiated thiol-ene radical addition using cysteamine HCl. The intact polycations are stable in solution, but they spontaneously unzip into their component monomers upon exposure to fluoride ions, with excellent sensitivity and selectivity. Upon triggered depolymerization, the antibacterial potency was largely retained but the hemolytic toxicity was substantially reduced. Thus, we reveal the first example of a self-immolative antibacterial polymer platform that will enable antibacterial materials to spontaneously unzip into biologically active small molecules upon the introduction of a specifically designed stimulus.

Oxidation Responsive Polymers with a Triggered Degradation via Arylboronate Self-Immolative Motifs on a Polyphosphazene Backbone

Oxidation responsive polymers with triggered degradation pathways have been prepared via attachment of self-immolative moieties onto a hydrolytically unstable polyphosphazene backbone. After controlled main-chain growth, postpolymerization functionalization allows the preparation of hydrolytically stable poly(organo)phosphazenes decorated with a phenylboronic ester caging group. In oxidative environments, triggered cleavage of the caging group is followed by self-immolation, exposing the unstable glycine-substituted polyphosphazene which subsequently undergoes to backbone degradation to low-molecular weight molecules. As well as giving mechanistic insights, detailed GPC and 1H and 31P NMR analysis reveal the polymers to be stable in aqueous solutions, but show a selective, fast degradation upon exposure to hydrogen peroxide containing solutions. Since the post-polymerization functionalization route allows simple access to polymer backbones with a broad range of molecular weights, the approach of using the inorganic backbone as a platform significantly expands the toolbox of polymers capable of stimuli-responsive degradation.

Degradable fluorescent single-chain nanoparticles based on metathesis polymers

We introduce the facile synthesis of fluorescent single-chain nanoparticles (SCNPs) based on chain-shattering acyclic diene metathesis (ADMET) polymers featuring self-immolative azobenzene motifs.

Green chain-shattering polymers based on a self-immolative azobenzene motif

A chain-shattering polymer system consisting of nontoxic, partially renewable resource-based monomersviaacyclic diene metathesis (ADMET) chemistry is introduced.

RAFT polymerization of ciprofloxacin prodrug monomers for the controlled intracellular delivery of antibiotics

Prodrug monomers derived from the antibiotic ciprofloxacin were synthesized with phenolic or aliphatic esters linking the drug to a polymerizable methacrylate group.

Redox-Responsive Self-Assembled Chain-Shattering Polymeric Therapeutics

We report the design and development of redox-responsive chain-shattering polymeric therapeutics (CSPTs). CSPTs were synthesized by condensation polymerization and further modified with poly(ethylene glycol) (PEG) via "Click" reaction. Size-controlled CSPT nanoparticles (NPs) were formed through nanoprecipitation with high drug loading (up to 18%); the particle size increased in a concentration dependent manner. Drug release from particles was well controlled over 48 h upon redox triggering. The anticancer efficacy of the CSPT NPs was validated both in vitro and in vivo.

Surface-accessible detection units in self-immolative polymers enable translation of selective molecular detection events into amplified responses in macroscopic, solid-state plastics

This Communication describes a strategy for incorporating detection units onto each repeating unit of self-immolative CDr polymers. This strategy enables macroscopic plastics to respond quickly to specific applied molecular signals that react with the plastic at the solid-liquid interface between the plastic and surrounding fluid. The response is a signal-induced depolymerization reaction that is continuous and complete from the site of the reacted detection unit to the end of the polymer. Thus, this strategy retains the ability of CDr polymers to provide amplified responses via depolymerization while simultaneously enhancing the rate of response of CDr-based macroscopic plastics to specific applied signals. Depolymerizable poly(benzyl ethers) were used to demonstrate the strategy and now are capable of depolymerizing in the context of rigid, solid-state polymeric materials.

Trigger chemistries for better industrial formulations

In recent years, innovations and consumer demands have led to increasingly complex liquid formulations. These growing complexities have provided industrial players and their customers access to new markets through product differentiation, improved performance, and compatibility/stability with other products. One strategy for enabling more complex formulations is the use of active encapsulation. When encapsulation is employed, strategies are required to effect the release of the active at the desired location and time of action. One particular route that has received significant academic research effort is the employment of triggers to induce active release upon a specific stimulus, though little has translated for industrial use to date. To address emerging industrial formulation needs, in this review, we discuss areas of trigger release chemistries and their applications specifically as relevant to industrial use. We focus the discussion on the use of heat, light, shear, and pH triggers as applied in several model polymeric systems for inducing active release. The goal is that through this review trends will emerge for how technologies can be better developed to maximize their value through industrial adaptation.

Dimeric drug polymeric nanoparticles with exceptionally high drug loading and quantitative loading efficiency

Encapsulation of small-molecule drugs in hydrophobic polymers or amphiphilic copolymers has been extensively used for preparing polymeric nanoparticles (NPs). The loadings and loading efficiencies of a wide range of drugs in polymeric NPs, however, tend to be very low. In this Communication, we report a strategy to prepare polymeric NPs with exceptionally high drug loading (>50%) and quantitative loading efficiency. Specifically, a dimeric drug conjugate bearing a trigger-responsive domain was designed and used as the core-constructing unit of the NPs. Upon co-precipitation of the dimeric drug and methoxypoly(ethylene glycol)-block-polylactide (mPEG-PLA), NPs with a dimeric drug core and a polymer shell were formed. The high-drug-loading NPs showed excellent stability in physiological conditions. No premature drug or prodrug release was observed in PBS solution without triggering, while external triggering led to controlled release of drug in its authentic form.

Trigger-Responsive Poly(β-amino ester) Hydrogels

Water-soluble, acrylate-terminated poly(β-amino esters) with built-in trigger-responsive domains were synthesized through Michael addition of trigger-responsive diacrylates and primary amines. They were used as macromolecular precursors for photoinitiated cross-linking reactions to prepare trigger-responsive hydrogels for protein encapsulation. The encapsulated proteins could be rapidly released upon external triggering.

Continuous Head-to-Tail Depolymerization: An Emerging Concept for Imparting Amplified Responses to Stimuli-Responsive Materials

Polymers that depolymerize continuously and completely from head-to-tail when a reaction-based detection unit is cleaved from the polymer provide both selective and amplified responses, a rare combination, to stimuli-responsive polymeric materials. This Viewpoint contextualizes this new class of depolymerizable polymers and outlines the key areas for growth and innovation.

Chain-shattering polymeric therapeutics with on-demand drug-release capability

Design of smart polymeric therapeutics

We designed and synthesized trigger-responsive chain-shattering polymeric therapeutics (CSPTs) via condensation polymerization of a UV-or hydrogen peroxide-responsive domain and a bisfunctional drug as co-monomers. CSPTs have precisely controlled molecular composition and unique chain-shattering type of drug release mechanism. Drug release kinetics can be precisely controlled by means of the trigger treatment. Chemotherapeutic-containing CSPTs showed trigger-responsive in vitro and in vivo antitumor efficacy.