A Fluorescent Probe with Large Stokes Shift Based on Benzothiadiazole Scaffolds for Selective Detection of Hg2+ in Lysosomes and Its Application in Biological Imaging

Mercury is highly toxic, and appropriate amounts of the mercury-selenium complex can protect plasma. However, when excessive mercury (II) ions (Hg2+) are exposed to human skin or ingested directly, it can lead to irreversible accumulation in the body. Therefore, detecting the presence of Hg2+ in cells is important. A novel fluorescent probe BTD-Hg-Lyso was designed and constructed based on the intramolecular charge transfer mechanism. Thiotaldehyde could specifically recognize Hg2+ so that the probe could produce a fluorescence enhancement effect. In addition, the fluorescent probe BTD-Hg-Lyso exhibited the advantages of large Stokes shift (210 nm) and good selectivity. More importantly, the probe BTD-Hg-Lyso could be used for the determination of Hg2+ in cellular lysosomes. BTD-Hg-Lyso was able to image Hg2+ in HeLa cells, zebrafish, and tobacco seedlings (rhizome and stem) successfully.

A near-infrared emitting "off-on" fluorescent probe for bioimaging of Pd(Ⅱ) ions in living cells and mice

BACKGROUND

The surging consumption of palladium in modern industry has given rise to its accumulation in the ecosystem, posing conspicuous toxicity to aquatic organisms and human health. The investigation of palladium in biological systems is highly demanded for the in-depth understanding of its dynamics and behaviors. Fluorescence imaging serves as a powerful approach to assess palladium species in biological systems, and currently most of the sensing probes are applicable to living cells. Effective tracking of palladium species in living organisms is challenging, which requires sufficient hydrophilicity and imaging depth of the probes.

RESULTS

Based on an intramolecular charge transfer (ICT) mechanism, a distyryl boron dipyrromethene (BODIPY) derivative (DISBDP-Pd) has been prepared for the near-infrared (NIR) fluorescence imaging of Pd2+ ions. Two additional methoxy triethylene glycol (TEG) chains could serve as flexible and hydrophilic moieties to enhance the aqueous solubility and cell permeability of the extended conjugate. Solution studies revealed that DISBDP-Pd exhibited a NIR fluorescence enhancement signal exclusively to Pd2+ ions (detection limit as low as 0.85 ppb) with negligible interference from Pd0 species and other closely related metal ions. Computational calculations have been performed to rationalize the binding mode and the mechanism of action. Fluorescence imaging assays have been conducted on A549 human non-small cell lung carcinoma cells and mouse models. Exhibiting negligible cytotoxicity, DISBDP-Pd demonstrated concentration-related fluorescence enhancement signals in response to Pd2+ ions in living cells and mice.

SIGNIFICANCE

DISBDP-Pd exhibits advantages over many small molecule palladium probes in terms of satisfactory aqueous solubility, high sensitivity and selectivity, and biocompatible NIR emission property, which are particularly favorable for the sensing application in biological environments. The design strategy of this probe can potentially be adopted for the functionalization of other BODIPY probes implemented for NIR fluorescence bioimaging.

A highly sensitive and selective fluorescent probe for rapid detection and intracellular imaging of Pd(II)

A novel near-infrared fluorescent probe (SWJT-13) for detecting Pd2+ ions was designed and synthesized using 3-bromopropargyne group as a recognition site. SWJT-13 can detect Pd2+ ions specifically, which can be quickly recognized by naked eye under natural light. SWJT-13 has a large Stokes shift (155 nm) with LOD of 10.5 nM. The mechanism was verified by 1H NMR, MS, and Gaussian calculations. In addition, the detection of Pd2+ ions by the probe was studied in HeLa cells.

A colorimetric and fluorescent signaling probe for assaying Pd2+ in practical samples

We developed an optical signaling probe to detect Pd2+ ions in Pd-containing catalyst and drug candidate. The Pd2+ signaling probe (Res-DT) was readily prepared by reacting the versatile fluorochrome resorufin with phenyl chlorodithioformate. In a phosphate-buffered saline solution (pH 7.4) containing sodium dodecyl sulfate (SDS) as a signal-boosting surfactant, Res-DT exhibited a pronounced colorimetric response with a chromogenic yellow to magenta shift, leading to a substantial increase in the fluorescence intensity. The Pd2+ signaling performance of Res-DT was attributed to the Pd2+-promoted hydrolysis of the dithioate moiety. The probe displayed high selectivity toward Pd2+ ions and remained unaffected by commonly encountered coexisting components. Moreover, the detection limit of Res-DT for Pd2+ ions was 10 nM, and the signaling was achieved within 7 min. Furthermore, to demonstrate the real-world applicability of Res-DT, a Pd2+ assay was performed in Pd-containing catalyst and drug candidate using an office scanner as an easily accessible measurement device. Our results highlight the prospects of Res-DT as a tool to detect Pd2+ ions in various practical samples, with potential applications in catalysis, medicine, and environmental science.

Fluorescent and chromogenic organic probes to detect group 10 metal ions: design strategies and sensing applications

Group 10 metals including Ni, Pd and Pt have been extensively applied in various essential aspects of human social life, material science, industrial manufactures, medicines and biology. The ionic forms of these metals are involved in several biologically important processes due to their strong binding capability towards different biomolecules. However, the mishandling or overuse of such metals has been linked to serious contamination of our ecological system, more specifically in soil and water bodies with acute consequences. Therefore, the detection of group 10 metal ions in biological as well as environmental samples is of huge significance from the human health point of view. Related to this, considerable efforts are underway to develop adequately efficient and facile methods to achieve their selective detection. Optical sensing of metal ions has gained increasing attention of researchers, particularly in the environmental and biological settings. Innovatively designed optical probes (fluorescent or colorimetric) are usually comprised of three basic components: an explicitly tailored receptor unit, a signalling unit and a clearly defined reporter unit. This review deals with the recent progress in the design and fabrication of fluorescent or colorimetric organic sensors for the detection of group 10 metal ions (Ni(II), Pd(II) and Pt(II)), with attention to the general aspects for design of such sensors.

Mechanistic Insight of Sensing Hydrogen Phosphate in Aqueous Medium by Using Lanthanide(III)-Based Luminescent Probes

The development of synthetic lanthanide luminescent probes for selective sensing or binding anions in aqueous medium requires an understanding of how these anions interact with synthetic lanthanide probes. Synthetic lanthanide probes designed to differentiate anions in aqueous medium could underpin exciting new sensing tools for biomedical research and drug discovery. In this direction, we present three mononuclear lanthanide-based complexes, EuLCl₃ (1), SmLCl₃ (2), and TbLCl₃ (3), incorporating a hexadentate aminomethylpiperidine-based nitrogen-rich heterocyclic ligand L for sensing anion and establishing mechanistic insight on their binding activities in aqueous medium. All these complexes are meticulously studied for their preferential selectivities towards different anions such as HPO₄²⁻, SO₄²⁻, CH₃COO⁻, I⁻, Br⁻, Cl⁻, F⁻, NO₃⁻, CO₃²⁻/HCO₃⁻, and HSO₄⁻ at pH 7.4 in aqueous HEPES (2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid) buffer. Among the anions scanned, HPO₄²⁻ showed an excellent luminescence change with all three complexes. Job’s plot and ESI-MS support the 1:2 association between the receptors and HPO₄²⁻. Systematic spectrophotometric titrations of 1–3 against HPO₄²⁻ demonstrates that the emission intensities of 1 and 2 were enhanced slightly upon the addition of HPO₄²⁻ in the range 0.01–1 equiv and 0.01–2 equiv., respectively. Among the three complexes, complex 3 showed a steady quenching of luminescence throughout the titration of hydrogen phosphate. The lower and higher detection limits of HPO₄²⁻ by complexes 1 and 2 were determined as 0.1–4 mM and 0.4–3.2 mM, respectively, while complex 3 covered 0.2–100 μM. This concludes that all complexes demonstrated a high degree of sensitivity and selectivity towards HPO₄²⁻.

A water soluble ESIPT-based fluorescent chemodosimeter for the ratiometric detection of palladium ions in aqueous solution and its application in live-cell imaging

A new Excited State Intramolecular Proton Transfer (ESIPT) based water-soluble fluorescent chemodosimeter for the ratiometric detection of palladium ions has been rationally designed and developed.

A water-soluble near-infrared fluorescent probe for specific Pd2+ detection

Palladium (Pd) is widely used in chemistry, biology, environmental science etc., and Pd²⁺ is the most plenitudinous oxidation state of the Pd that can exist under physiological conditions or in living cells, which could have adverse effects on both our health and environment. Thus, it is of great significance to monitor the changes of Pd²⁺. Hence, a novel near-infrared fluorescent probe M-PD has been developed for selective detection of Pd²⁺ based on naphthofluorescein in this work. The result demonstrated that M-PD exhibited favorable properties for sensing Pd²⁺ such as excellent water solubility, high selectivity and sensitivity. And the limit of detection was estimated as 10.8 nM, much lower than the threshold in drugs (5-10 ppm) specified by European Directorate for the Quality Control of Medicines. More importantly, detection and recovery experiments of Pd²⁺ in aspirin aqoeous solution and soil are satisfactory. In addition, M-PD has also been successfully used for near-infrared fluorescence imaging of Pd²⁺ in living cells, indicating that the probe has better feasibility and application potential in the determination of Pd²⁺.

Pd2+fluorescent sensors based on amino and imino derivatives of rhodamine and improvement of water solubility by the formation of inclusion complexes with β-cyclodextrin

Mono- and bis-rhodamine derivatives appended with amino (RhB1) and imino (BRI) groups, respectively, have been designed as fluorescent sensors for Pd²⁺ions.

A theoretical investigation of the two-photon absorption and fluorescent properties of coumarin-based derivatives for Pd2+ detection

Two-photon fluorescent probes that can detect Pd²⁺ according to the “turn-on” fluorescence signal are reported.

A new hydroxynaphthyl benzothiazole derived fluorescent probe for highly selective and sensitive Cu(2+) detection

A new reactive probe, 1-(benzo[d]thiazol-2-yl)naphthalen-2-yl-picolinate (BTNP), was designed and synthesized. BTNP acts as a highly selective probe to Cu(2+) in DMSO/H2O (7/3, v/v, Tris-HCl 10mM, pH=7.4) solution based on Cu(2+) catalyzed hydrolysis of the picolinate ester moiety in BTNP, which leads to the formation of an ESIPT active product with dual wavelength emission enhancement. The probe also possesses the advantages of simple synthesis, rapid response and high sensitivity. The pseudo-first-order reaction rate constant was calculated to be 0.205min(-1). Moreover, application of BTNP to Cu(2+) detection in living cells and real water samples was also explored.

A depropargylation-triggered spontaneous cyclization based fluorescent “turn-on” chemodosimeter for the detection of palladium ions and its application in live-cell imaging

A novel depropargylation-triggered spontaneous cyclization reaction based fluorescent turn-on chemodosimeter for the detection of palladium ions has been rationally designed and developed.

A new turn on Pd(2+)-specific fluorescence probe and its use as an imaging reagent for cellular uptake in Hct116 cells

A new coumarin-rhodamine conjugate is used as a specific probe for Pd(2+) ions and this could even delineate Pd(II) from Pd(0) or Pd(IV) in aqueous buffer medium (pH ∼ 7). Laser confocal microscopic studies reveal that efficient cellular internalization of this reagent helps in imaging the cellular uptake of Pd(2+) as low as 0.1 ppm in Hct 116 cells. This reagent could even be used for estimation of Pd(2+) in human urine samples.

A simple and effective fluorescent probe based on rhodamine B for determining Pd2+ ions in aqueous solution

It is demonstrated that the mechanism of the probe to Pd²⁺ and images under a UV lamp.

Combining the PeT and ICT mechanisms into one chemosensor for the highly sensitive and selective detection of zinc

A novel fluorescent sensor (ZS1) based on the dual-mechanism of PeT/ICT for the highly sensitive and selective detection of Zn²⁺was designed and synthesized.

Excited state intramolecular proton transfer in π-expanded phenazine-derived phenols

Two previously inaccessible analogs of 10-hydroxybenzo[h]quinoline were prepared via a straightforward strategy comprising the formation of π-expanded phenazines skeleton followed by C-H acetoxylation at position 10. Two bis-phenols possessing C2 and D2 symmetry were obtained in yields of 52% and 15%, respectively. The occurrence of excited state intramolecular proton transfer (ESIPT) was detected in all cases because steady state emission was observed only from the excited keto-tautomer. Additionally, a short-lived, ∼0.1 ps, emission decay was resolved by the femtosecond up-conversion technique at the blue side of the keto-tautomer emission band, 610 nm, and was attributed to the ESIPT, i.e., conversion from enol to keto tautomer. In comparison with the corresponding 10-hydroxybenzo[h]quinoline emissions, the emission spectrum of the π-expanded phenazine analogues were weaker but displayed a characteristic bathochromically shift into NIR region. These phenazine analogues constitute one of largest heterocycles for which ESIPT was unambiguously detected.