Targeted and Long-Term Fluorescence Imaging of Plant Cytomembranes Using Main-Chain Charged Polyelectrolytes with Aggregation-Induced Emission

Fluorescent polyelectrolytes have attracted tremendous attention due to their unique properties and wide applications. However, current research objects of fluorescent polyelectrolytes mainly focus on side-chain charged polyelectrolytes, and the applications of polyelectrolytes in plant cytomembrane imaging with long time and high specificity still remain challenging. Herein, long-time and targeted fluorescence imaging of plant cytomembranes was achieved for the first time using main-chain charged polyelectrolytes (MCCPs) with aggregation-induced emission (AIE). A series of MCCPs were designed and synthesized, among which the red-emissive and AIE-active MCCP with a triphenylamine linker and a cyano group around the cationic ring-fused heterocyclic core showed the best fluorescence imaging performance of plant cells. Unlike other MCCPs and its neutral form of polymer, this cyano-substituted conjugated polyelectrolyte can specifically target the cytomembrane of plant cells within a short staining time with many advantages, including wash-free staining, high photostability and imaging integrity, excellent durability (at least 12 h), and low biotoxicity. In addition to onion epidermal cells, this AIE fluorescence probe also shows good imaging capabilities for other kinds of plant cells such as Glycine max and Vigna radiata. Such an AIE-active MCCP-based imaging system provides an effective design strategy to develop fluorescence probes with high specificity and long-term imaging ability toward plant plasma membranes.

A short review article on conjugated polymers

This article provides a brief review of conjugated polymers and the various typical polymerization reactions exploited by the community to synthesise different conjugated polyelectrolytes with varied conjugated backbone systems. We further discuss with detailed emphasises the mechanism involved such as photo-induced electron transfer, resonance energy transfer, and intra-molecular charge transfer in the detection or sensing of various analytes. Owing to their excellent photo-physical properties, facile synthesis, ease of functionalization, good biocompatibility, optical stability, high quantum yield, and strong fluorescence emission. Conjugated polymers have been explored for wide applications such as chemical and biological sensors, drug delivery and drug screening, cancer therapeutics and imaging. As such we believe it will be a timely review article for the community.

Optical and Electrochemical Aptasensors Developed for the Detection of Alpha-Fetoprotein

Early diagnosis of hepatocellular carcinoma (HCC), a leading cause of cancer mortality, is decisive for successful treatment of this type of cancer and increasing the patients' survival rate. Alpha-fetoprotein (AFP) is a glycoprotein that has been currently employed as a potential serological biomarker for determination of HCC and several other cancers. Achieving highly sensitive and specific detection of this biomarker is an effective strategy to inhibit developing issues caused by the cancer. Though, traditional procedures cannot meet the requirements due to the technical drawbacks. Recently, growing number of aptamer-based biosensors (aptasensors) attracted important attention as superior diagnostic tools because of their unique properties such as high stability, target versatility and remarkable affinity and selectivity. Nanomaterials, which broadly employed in the structure of these aptasensors, can considerably enhance the detection limit and sensitivity of analytes determination. Therefore, this review selectively investigated the recent progresses in several different optical and electrochemical aptasensors and nano-aptasensors designed for AFP assay.

Functionalization of Water-Soluble Conjugated Polymers for Bioapplications

Water-soluble conjugated polymers (WS-CPs) have found widespread use in bioapplications ranging from in vitro optical sensing to in vivo phototherapy. Modification of WS-CPs with specific molecular functional units is necessary to enable them to interact with biological targets. These targets include proteins, nucleic acids, antibodies, cells, and intracellular components. WS-CPs have been modified with covalently linked sugars, peptides, nucleic acids, biotin, proteins, and other biorecognition elements. The objective of this article is to comprehensively review the various synthetic chemistries that have been used to covalently link biofunctional groups onto WS-CP platforms. These chemistries include amidation, nucleophilic substitution, Click reactions, and conjugate addition. Different types of WS-CP backbones have been used as platforms including poly(fluorene), poly(phenylene ethynylene), polythiophene, poly(phenylenevinylene), and others. Example applications of biofunctionalized WS-CPs are also reviewed. These include examples of protein sensing, flow cytometry labeling, and cancer therapy. The major challenges and future development of functionalized conjugated polymers are also discussed.

Conjugated polymer nanoparticles and their nanohybrids as smart photoluminescent and photoresponsive material for biosensing, imaging, and theranostics

The emergence of conjugated polymers (CPs) has provided a pathway to attain smart multifunctional conjugated polymer nanoparticles (CPNs) with enhanced properties and diverse applications. CPNs based on π-extended CPs exhibit high fluorescence brightness, low cytotoxicity, excellent photostability, reactive oxygen species (ROS) generation ability, high photothermal conversion efficiency (PCE), etc. which endorse them as an excellent theranostic tool. Furthermore, the unique light-harvesting and energy transfer properties of CPNs enables their transformation into smart functional nanohybrids with augmented performance. Owing to such numerous features, simple preparation method and an easy separation process, the CPNs and their hybrids have been constantly rising as a frontrunner in the domain of medicine and much work has been done in the respective research area. This review summarizes the recent progress that has been made in the field of CPNs for biological and biomedical applications with special emphasis on biosensing, imaging, and theranostics. Following an introduction into the field, a first large section provides overview of the conventional as well as recently established synthetic methods for various types of CPNs. Then, the CPNs-based fluorometric assays for biomolecules based on different detection strategies have been described. Later on, examples of CPNs-based probes for imaging, both in vitro and in vivo using cancer cells and animal models have been explored. The next section highlighted the vital theranostic applications of CPNs and corresponding nanohybrids, mainly via imaging-guided photodynamic therapy (PDT), photothermal therapy (PTT) and drug delivery. The last section summarizes the current challenges and gives an outlook on the potential future trends on CPNs as advanced healthcare material.

Recent advances in the exonuclease III-assisted target signal amplification strategy for nucleic acid detection

The detection of nucleic acids has become significantly important in molecular diagnostics, gene therapy, mutation analysis, forensic investigations and biomedical development, and so on. In recent years, exonuclease III (Exo III) as an enzyme in the 3'-5' exonuclease family has evolved as a frequently used technique for signal amplification of low level DNA target detection. Different from the traditional target amplification strategies, the Exo III-assisted amplification strategy has been used for target DNA detection through directly amplifying the amounts of signal reagents. The Exo III-assisted amplification strategy has its unique advantages and characters, because the character of non-specific recognition of Exo III can overcome the limitation of a target-to-probe ratio of 1 : 1 in the traditional nucleic acid hybridization assay and acquire higher sensitivity. In this review, we selectively discuss the recent advances in the Exo III-assisted amplification strategy, including the amplification strategy integrated with nanomaterials, biosensors, hairpin probes and other nucleic acid detection methods. We also discuss the strengths and limitations of each strategy and methods to overcome the limitations.

AIE materials for lysosome imaging

The aggregation-induced emission (AIE) active bioprobes are known for their high photostability and extraordinary signal to noise ratio. In view of this, research efforts to synthesize new AIE bioimaging probes are at an incredible speed. In this chapter, we have summarized the various lysosome specific AIE active "turn-on" bioprobes having applications in lysosome imaging, monitoring of lysosome bioactivity and evaluation of their therapeutic effects. By discussing their design and operational mechanisms, we hope to provide more insight into designing new AIE bioprobes for specific sensing and imaging of lysosome having flexibility for broad range of biomedical applications.

PCR-Free Methodology for Detection of Single-Nucleotide Polymorphism with a Cationic Polythiophene Reporter

This study presents a nonamplification-based nucleic acid assay for the detection of single-nucleotide polymorphism (SNP) associated with familial Mediterranean fever (FMF) besides polymerase chain reaction (PCR)-based methodologies. The major objective is to show the potential of the proposed assay for rapid screening of FMF in a Mediterranean region of 400 million population. The assay relies on binding difference of specially designed wild and mutant primers to the target genomic DNA, followed by determination of unbound primers by quick titration of a cationic polythiophene reporter. The fluorescent reporter exhibits signal transition from 525 to 580 nm in the presence of unbound primers, and it correlates the binding affinity of label-free primers to the homozygous wild and mutant genomes. As a proof of concept, 26 real samples are studied relying on the ON and OFF fluorescence signals of the cationic polythiophene reporter. The results are analyzed by principal component analysis (PCA), which provides clear separation of healthy and patient individuals. The further analysis by support vector machine (SVM) classification has revealed that our assay converges to 96% overall accuracy. These results support that the PCR-free nucleic acid assay has a significant potential for rapid and cost-effective screening of familial Mediterranean fever.

Strong-Induced CPL Emission Promoted from Achiral Conjugated Polymer-Containing Emissive Nematic Liquid Crystals (P-N*-LCs)

With the rapid development on 3D printing technology, more and more works have been devoted to 3D display. 3D display will really come true by using circularly polarized luminescence (CPL)-active materials with both high quantum yield and dissymmetry factor (g_em ) in organic light-emitting diode or liquid crystals (LCs). But so far most of these CPL materials cannot meet the real application requirement because of the low g_em values in the range of 10^-5 -10^-2 . In this paper, ternary chiral emissive LCs (P-N*-LCs) is designed by doping chiral binaphthyl-based enantiomers as chiral dopant (Guest 1) and achiral conjugated polymer as induced CPL emitter (Guest 2) into nematic liquid crystal (N-LCs) Host 5CB. Both Guest 1 and Guest 2 show excellent compatibility with Host 5CB. The obtained ternary P-N*-LCs can emit strong-induced CPL signal with g_em up to 1.12 and Ф_FL up to 66.1%. This work first develops a new strategy for the smart design of excellent CPL materials from versatile achiral conjugation fluorescence polymers.

Selective recognition of ATP by multivalent nano-assemblies of bisimidazolium amphiphiles through "turn-on" fluorescence response

Bisimidazolium receptors, tagged with chromophoric pyrene at one end and linked to an n-alkyl chain at the other, underwent self-assembly in aqueous media depending on the length of the alkyl segment. The amphiphilic derivatives having n-decyl or longer chains, formed nano-assemblies with cyanic-green emission resulting from the stacked pyrene chromophores in the aggregates. The presence of positive surface charges on the multivalent aggregates led to ATP binding which was accompanied by a significant increase in the excimeric emission intensity. This provided a convenient way of monitoring ATP binding in a "turn-on" mode and an efficient detection of ATP was achieved in aqueous buffer and also in buffer containing 150 mM NaCl at physiological pH value. Furthermore, the multivalent aggregates demonstrated a significant selectivity in ATP detection over ADP, AMP and pyrophosphate.

A Remarkable Fluorescence Quenching Based Amplification in ATP Detection through Signal Transduction in Self-Assembled Multivalent Aggregates

Signal transduction is essential for the survival of living organisms, because it allows them to respond to the changes in external environments. In artificial systems, signal transduction has been exploited for the highly sensitive detection of analytes. Herein, a remarkable signal transduction, upon ATP binding, in the multivalent fibrillar nanoaggregates of anthracene conjugated imidazolium receptors is reported. The aggregates of one particular amphiphilic receptor sensed ATP in high pm concentrations with one ATP molecule essentially quenching the emission of thousands of receptors. A cooperative merging of the multivalent binding and signal transduction led to this superquenching and translated to an outstanding enhancement of more than a millionfold in the sensitivity of ATP detection by the nanoaggregates; in comparison to the "molecular" imidazolium receptors. Furthermore, an exceptional selectivity to ATP over other nucleotides was demonstrated.

Polythiophenes with Cationic Phosphonium Groups as Vectors for Imaging, siRNA Delivery, and Photodynamic Therapy

In this work, we exploit the versatile function of cationic phosphonium-conjugated polythiophenes to develop multifunctional platforms for imaging and combined therapy (siRNA delivery and photodynamic therapy). The photophysical properties (absorption, emission and light-induced generation of singlet oxygen) of these cationic polythiophenes were found to be sensitive to molecular weight. Upon light irradiation, low molecular weight cationic polythiophenes were able to light-sensitize surrounding oxygen into reactive oxygen species (ROS) while the highest were not due to its aggregation in aqueous media. These polymers are also fluorescent, allowing one to visualize their intracellular location through confocal microscopy. The most promising polymers were then used as vectors for siRNA delivery. Due to their cationic and amphipathic features, these polymers were found to effectively self-assemble with siRNA targeting the luciferase gene and deliver it in MDA-MB-231 cancer cells expressing luciferase, leading to 30-50% of the gene-silencing effect. In parallel, the photodynamic therapy (PDT) activity of these cationic polymers was restored after siRNA delivery, demonstrating their potential for combined PDT and gene therapy.

Novel benzimidazole-based conjugated polyelectrolytes: synthesis, solution photophysics and fluorescent sensing of metal ions

Two benzimidazole-based conjugated polyelectrolytes (+)-PPBIPV and (-)-PPBIPV which have opposite charges on their side chains were synthesized via Heck coupling reaction and characterized by 1H-NMR, UV-vis and PL spectroscopy. These two polyelectrolytes are both consisted of benzimidazole derivatives and phenylenevinylene units. The absorption and emission spectra reveal that the polymers both have solvent-dependency and concentration-dependency, and they exhibit aggregation effect in aqueous solution. In the respect of ion detection, the aqueous solution of (+)-PPBIPV has excellent selectivity and sensitivity for Fe3+. Moreover, Pd2+ can almost completely quench the fluorescence of (+)-PPBIPV in methanol solution, and its quenching constant KSV is 5.93×104 M-1. For (-)-PPBIPV, Sn2+ can double the fluorescence intensity of its aqueous solution, while (-)-PPBIPV has good identification for Fe3+ in methanol with a KSV = 3.44×105 M-1. Hence, two polyelectrolytes have considerable potential to become effective fluorescent sensing materials for some specific metal ions. All of the stoichiometric relationships between metal ions and conjugated polyelectrolytes were calculated using Benesi-Hildebrand equation.

High affinity heparin detection by multivalent supramolecular polymers through aggregation induced emission

Supramolecular polymers based on aggregation induced emission active cationic cyanostilbenes provide a highly sensitive “light-up” platform for heparin detection.

An efficient water-soluble fluorescent chemosensor based on furan Schiff base functionalized PEG for the sensitive detection of Al3+ in pure aqueous solution

An efficient reversible fluorescent chemosensor, PEGFB, based on polyethylene glycol bearing a furan Schiff base unit has been successfully developed to sensitively detect Al³⁺ in pure aqueous solution.

Advances in conjugated polymers for visualization of latent fingerprints: a critical perspective

Owing to unique photophysical and structural features conjugated polymers (CPs) have demonstrated high selectivity, specificity and enhanced imaging ability and are utilized for rapid latent fingerprint development using simple processing methods.

Thermotropic Liquid-Crystalline and Light-Emitting Properties of Poly(pyridinium) Salts Containing Various Diamine Connectors and Hydrophilic Macrocounterions

A set of poly(pyridinium) salts containing various diamine moieties, as molecular connectors, and poly(ethyleneglycol)-4-nonylphenyl-3-sulfopropyl ether, thereafter referred to as “Macroion”, as the hydrophilic counterion, were prepared by metathesis reaction from the respective precursory tosylated poly(pyridinium)s in methanol. The structure of these ionic polymers was established by spectroscopy and chromatography techniques. The shape-persistent ionic poly(pyridinium) materials, inserting rigid or semi-rigid diamine spacers, display thermotropic liquid-crystalline properties from room-temperature up to their isotropization (in the temperature range around 160–200 °C). The nature of the LC phases is lamellar in both cases as identified by the combination of various complementary experimental techniques including DSC, POM and variable-temperature SAXS. The other polymers, inserting bulky or flexible spacers, only form room temperature viscous liquids. These new macromolecular systems can then be referred to as polymeric ionic liquid crystals (PILCs) and or polymeric ionic liquids (PILs). All the ionic polymers show excellent thermal stability, in the 260–330 °C temperature range as determined by TGA measurements, and a good solubility in common organic solvents as well as in water. Their optical properties were characterized in both solution and solid states by UV−Vis and photoluminescent spectroscopies. They emit blue or green light in both the states and exhibit a positive solvatochromic effect.

A simple turn-on fluorescent chemosensor based on Schiff base-terminated water-soluble polymer for selective detection of Al3+ in 100% aqueous solution

A simple water-soluble polymer PEGBHB based on polyethylene glycol bearing a Schiff base derivative moiety was successfully designed and synthesized. PEGBHB showed high selectivity and sensitivity towards Al³⁺ as a turn-on fluorescent chemosensor without influence by other competitive metal ions in 100% aqueous solution. The detection limit of PEGBHB for Al³⁺ was found to be 9.67 × 10^-9 M. A 1:1 stoichiometry between PEGBHB and Al³⁺ has been confirmed by Job plot analysis. PEGBHB could detect Al³⁺ over a wide pH range from 4 to 10. The chemosensor was reversible by adding EDTA to the solution of PEGBHB-Al³⁺ complex. An INHIBIT molecular logic gate was constructed with the help of OFF-ON-OFF signal on alternate addition of Al³⁺ and EDTA to the chemosensor. Furthermore, test papers were fabricated facilely using PEGBHB for convenient and visual detection of practical Al³⁺.

A new tetraphenylethylene based AIE sensor with light-up and tunable measuring range for adenosine triphosphate in aqueous solution and in living cells

An AIE based tetraphenylethylene derivative (TPPTPE) was synthesized for light-up sensing of ATP in aqueous solution. The measuring range for ATP can be tuned by varying the concentration of the TPPTPE. A one-step straightforward quantitative analysis of the ATP level in cell lysates can be realized using the TPPTPE. Moreover, the TPPTPE can be used for monitoring apyrase activity in aqueous solution and detecting ATP both in living cancer cell lines and in living normal cell lines.

A dual chemosensor for Cu2+ and Hg2+ based on a rhodamine-terminated water-soluble polymer in 100% aqueous solution

A novel water-soluble polymer bearing a rhodamine receptor (PEGSRh) was synthesized as a dual chemosensor for the recognition of Cu2+ and Hg2+ in 100% aqueous solution. PEGSRh not only exhibited a sensitive colorimetric response towards Cu2+ and Hg2+ but also showed a selective turn-on fluorescence response towards Hg2+ over other metal ions. The binding stoichiometry for the complexation of PEGSRh with Cu2+ and Hg2+ was confirmed to be 1 : 1 by Job plot analysis. The low detection limits were found to be 5.92 × 10-7 M for Cu2+ and 2.85 × 10-6 M for Hg2+. The responses of PEGSRh to Cu2+ and Hg2+ were both stable over wide pH ranges. In addition, the fluorescence intensity changes of PEGSRh solution by the inputs of Hg2+, Cu2+ and EDTA have been used to construct a combinational logic gate. Again, an INHIBIT logic gate was also obtained by employing Cu2+ and EDTA as the chemical inputs and the absorbance signal as the output. Moreover, test papers were prepared facilely using PEGSRh for practical on-site detection of Cu2+ and Hg2+.

A cationic conjugated polymer and graphene oxide: Application to amplified fluorescence detection of sinapine

An amplified fluorescence strategy is described for the detection of sinapine (SP) by using a cationic conjugated polymer (PFP) and graphene oxide (GO). It is observed that the fluorescein (FAM)-labeled single-stranded DNA (FAM-DNA) is absorbed on the surface of GO if SP is absent. This causes that fluorescence resonance energy transfer (FRET) from PFP to FAM is inefficient when adding PFP into FAM-DNA/GO complex. If SP is added to FAM-DNA/GO complex, FAM-DNA is desorbed from GO surface due to the competitive binding of SP and FAM-DNA toward GO. In this case, FAM-DNA is close to PFP in the presence of PFP through strong electrostatic interaction, leading to the occurrence of efficient FRET. Based on the above phenomenon, we demonstrate a method to amplify fluorescence signal of traditional GO-based SP assay by introducing PFP. In comparison to the use of single GO, the combination of PFP with GO-based strategy displays high turn-on ratio and enhanced sensitivity with a limit of detection as low as 7.3 ng mL^-1 for SP detection. Satisfactory results in practical samples are also obtained by the recovery experiments, demonstrating the potential application of cationic conjugated polymer in plant-derived small molecule.

New Layered Polythiophene-Silica Composite Through the Self-Assembly and Polymerization of Thiophene-Based Silylated Molecular Precursors

A new layered hybrid polythiophene-silica material was obtained directly by hydrolysis and polycondensation (sol-gel) of a silylated-thiophene bifunctional precursor, and its subsequent oxidative polymerization by FeCl₃. This precursor was judiciously designed to guarantee its self-assembly and the formation of a lamellar polymer-silica structure, exploiting the cooperative effect between the hydrogen bonding interactions, originating from the ureido groups and the π-stacking interactions between the thiophene units. The lamellar structure of the polythiophene-silica composite was confirmed by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) analyses. The solid-state nuclear magnetic resonance (NMR), UV-Vis, and photoluminescence spectra unambiguously indicate the incorporation of polythiophene into the silica matrix. Our work demonstrates that using a polymerizable silylated-thiophene precursor is an efficient approach towards the formation of nanostructured conjugated polymer-based hybrid materials.

Fluorescence Resonance Energy Transfer-Based Wash-Free Bacterial Imaging and Antibacterial Application Using a Cationic Conjugated Polyelectrolyte

The increase in bacterial infection and antibiotic resistance has posed a severe threat to the human health. This threat has warranted an imperative demand for the development of a new and effective bactericidal material to eradicate the antibiotic-resistant pathogenic bacteria. In this work, we report the wash-free imaging of Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria using cationic conjugated polyelectrolyte[9,9-bis(6'-methylimidazoliumbromide)hexyl-fluorene- co-4,7-(2,1,3-benzothiadiazole)] (PFBT-MI) based on aggregation-induced fluorescence resonance energy transfer (FRET). Cationic imidazolium group strapped on the polymer side chain not only increases its solubility in water but also helps in binding with the negatively charged bacterial membrane via electrostatic interactions to turn on its bright yellow emission. The change in the fluorescence color of conjugated polyelectrolyte in the presence of bacteria could be visualized very easily via naked eyes under a UV lamp (365 nm). Furthermore, the antibacterial activity of PFBT-MI against both S. aureus and E. coli was observed because of the amphiphilic nature of the conjugated polyelectrolyte which in turn is due to the presence of ionic functionality and conjugated polymer backbone that can intercalate very proficiently into the bacterial membrane, which disrupts the membrane integrity and thus results in toxicity. Morphologically, the membrane damage was perceived via field emission scanning electron microscopy (FESEM) images, which clearly indicated the disruption of cell membrane upon exposure to PFBT-MI. The PFBT-MI acts as an effective antibacterial agent, with a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) value of (30 μM or 23.7 μg/mL) and (60 μM or 47.7 μg/mL) for S. aureus and for E. coli (60 μM or 47.7 μg/mL) and (100 μM or 79 μg/mL), respectively. Moreover, PFBT-MI shows less cytotoxicity against mammalian cells at concentration greater than MIC.

Rapid aptasensor capable of simply detect tumor markers based on conjugated polyelectrolytes

In this paper, a very simple, easily-operated and universal platform is proposed for tumor marker detection. In this strategy, tumor marker-specific aptamer, which can quench the fluorescence of polyfluorene-based cationic conjugated polyelectrolytes (PFN⁺), are used as recognizing probes. Upon addition of tumor marker, the aptamer can be assembled into the tumor marker-aptamer complex, resulting in fluorescence recovery of PFN⁺ and the detection of the targets. The most widely-used tumor markers, carcinoembryonic antigen (CEA) and fetoprotein (AFP) have been chosen as the model analytes for this work. The sensing method is capable of rapidly detect target protein within 5 min without complex handling procedure and expensive instruments. Compared with previous studies, the assay presented here is really simple and avoids either conjugated polyelectrolytes (CPEs) modification or oligonucleotide labeling. This method also shows a wide detection range of 3 orders of magnitude and the detection limit is 0.316 ng/mL for CEA and 1.76 ng/mL for AFP. Furthermore, the approach requires only a convenient"mix-and-detect" procedure and offers a universal platform for the sensitive detection of any target molecule of choice according to the selected aptamer.

A cationic conjugated polymer coupled with exonuclease I: application to the fluorometric determination of protein and cell imaging

A strategy is described for the detection of protein by using a cationic fluorescent conjugated polymer coupled with exonuclease I (Exo I). Taking streptavidin (SA) as model protein, it is observed that Exo I can digest single-stranded DNA conjugated with biotin and carboxyfluorescein (P1) if SA is absent. This leads to the formation of small nucleotide fragments and to weak fluorescence resonance energy transfer (FRET) from the polymer to P1. If, however, SA is present, the high affinity of SA and biotin prevents the digestion of P1 by Exo I. This results in the sorption of P1 on the surface of the polymer through strong electrostatic interaction. Hence, efficient FRET occurs from the fluorescent polymer to the fluorescent label of P1. Fluorescence is measured at an excitation wavelength of 370 nm, and emission is measured at two wavelengths (530 and 425 nm). The ratio of the two intensities (I₅₃₀/I₄₂₅) is directly related to the concentration of SA. Under the optimal conditions, the assay has a detection limit of 1.3 ng·mL^-1. The method was also applied to image the folate receptor in HeLa cells, thus demonstrating the versatility of this strategy. Graphical abstract A fluorometric strategy is described for protein detection and cell imaging based on a cationic conjugated polymer (PFP) coupled with exonuclease I (Exo I) trigged fluorescence resonance energy transfer (FRET).

Highly sensitive detection of nucleic acids using a cascade amplification strategy based on exonuclease III-assisted target recycling and conjugated polyelectrolytes

A ratiometric and cascade amplification strategy that combines the signal amplification and effecitive FRET property of CPEs with the Exo III-assisted target recycling method has been developed for DNA detection.

Photostable and biocompatible AIE-active conjugated polyelectrolytes for efficient heparin detection and specific lysosome labelling

A series of new conjugated polyelectrolytes (CPEs) with emissive tetraphenylethene-containing backbones and specific targeting pendants are synthesized and characterized.

Development of Well-Preserved, Substrate-Versatile Latent Fingerprints by Aggregation-Induced Enhanced Emission-Active Conjugated Polyelectrolyte

The development of highly efficient latent fingerprint (LFP) technology remains extremely vital for forensic and criminal investigations. In this contribution, a straightforward, rapid, and cost-effective method has been established for the quick development of well-preserved latent fingerprint on multiple substrates, including plastic, glass, aluminum foil, metallic surfaces, and so forth, without any additional treatment, based on aggregation-induced enhanced emission-active conjugated polyelectrolyte (CPE) 3,3'-((2-(4-(1,2-diphenyl-2-(p-tolyl)vinyl)phenyl)-7-(7-methylbenzo[c][1,2,5]thiadiazol-4-yl)-9H-fluorene-9,9-diyl)bis(hexane-6,1-diyl))bis(1-methyl-1H-imidazol-3-ium) bromide, revealing clearly the third-level details (ridges, bifurcations, and pores) with high selectivity, high contrast, and no background interference even by blood stains, confirming the ability of the proposed technique for LFP detection with high resolution. The LFP development process was accomplished simply by immersing fingerprint-loaded substrate into the CPE solution for ∼1 min, followed by shaking off the residual polymer solution and then air drying. The CPE was readily transferred to the LFPs because of the strong electrostatic and hydrophobic interaction between the CPE molecules and the fingerprint components revealing distinct fluorescent images on various smooth nonporous surfaces.

Conjugated Polyelectrolyte Based Sensitive Detection and Removal of Antibiotics Tetracycline from Water

A new conjugated polyelectrolyte poly[5,5'-(((2-phenyl-9H-fluorene-9,9-diyl)bis(hexane-6,1-diyl))bis(oxy))diisophthalate] sodium (PFPT) was synthesized via the palladium-catalyzed Suzuki cross-coupling polymerization method and successfully applied for the rapid, real time, and highly sensitive detection of antibiotics tetracycline (Tc) in 100% aqueous media via photoinduced electron transfer with detection limit in the ppb level. Remarkably, PFPT could also be applied for the trace analysis of Tc in serum samples having recoveries well in the range 92-97% with relative standard deviations (RSD) of 1.01-1.14%, confirming reliability of the present method for the analysis of Tc. Additionally, PFPT was blended with the abundant natural polysaccharide chitosan to form CS-PFPT composite films and developed as a biopolymer based membrane for the removal of Tc from water samples with a good adsorption capacity of 3.12 mg g^-1, thus finding vital application in the treatment of antibiotic infested wastewater.

Control of electrostatic interaction between a molecular beacon aptamer and conjugated polyelectrolyte for detection range-tunable ATP assay

A new strategy is suggested to fine-tune the detection range by controlling the ionic density of CPEs in the MBA/CPE-based ATP assay.

A new FRET-based ratiometric probe for fluorescence and colorimetric analyses of adenosine 5′-triphosphate

A new ratiometric probe for ATP was designed based on the binding-induced modulation of FRET coupled with the ACQ sensing mechanism.

Pyrophosphate Sensor Based on Principal Component Analysis of Conjugated Polyelectrolyte Fluorescence

The pyrophosphate anion (PPi) plays an important role in biochemical processes. Therefore, a simple but reliable analytical technique is essential for selective detection of PPi in biochemical systems. Here, we present a principal component analysis (PCA) method for analytical determination of PPi concentration using a fluorescent conjugated polyelectrolyte (CPE) combined with a polyamine modifier. The CPE has anionic side chains and dissolves molecularly in water, as indicated by its structured fluorescence emission spectrum. However, addition of tris(3-aminoethyl)amine (tetraamine or N4) quenches the CPE fluorescence emission. Tetraamine, which is a polycation at neutral pH, binds multiple anionic CPE chains, leading to aggregate formation, resulting in aggregation-induced fluorescence quenching. Addition of PPi to the polymer-amine aggregate reverses the process, resulting in fluorescence recovery. The relatively higher concentration of PPi compared to that of the polymer allows it to effectively compete to bind the amine, thus releasing molecularly dissolved polymer chains. Fluorescence correlation spectroscopy of the P1/N4 complex and of P1/N4/PPi confirms the change in size of the CPE aggregates that occurs upon reversible aggregation. Application of PCA to the fluorescence emission data set of standard samples yields two principal components, which are used to create a predictive model for PPi analysis. The PCA method is able to directly determine the concentration of PPi with approximately 95% accuracy within the concentration range from 100 μM to 3 mM, without the need for a reference state as is typically needed for ratiometric fluorescence assays.

Fluorescence and colorimetric detection of ATP based on a strategy of self-promoting aggregation of a water-soluble polythiophene derivative

A sensitive fluorescent and colorimetric dual-modal probe for the detection of ATP has been developed based on a strategy of self-promoting aggregation of a cationic polythiophene derivative bearing anthracene groups in the side chain with a detection limit as low as 10(-9) M.

Visual Detection of Multiplex MicroRNAs Using Cationic Conjugated Polymer Materials

A simple, visual, and specific method for simultaneous detection of multiplex microRNAs (miRNAs) has been developed by integrating duplex-specific nuclease (DSN)-induced amplification with cationic conjugated polymer (CCP) materials. The probe DNA with a complementary sequence to target miRNA is labeled with fluorescein dye (FAM). Without target miRNA, the single-strand DNA probe cannot be digested by DSN. Upon adding CCPs, efficient fluorescence resonance energy transfer (FRET) from CCP to FAM occurs owing to strong electrostatic interactions between CCP and the DNA probe. In the presence of target miRNA, the DNA probe hybridizes with target miRNA followed by digestion to small nucleotide fragments by DSN; meanwhile, the miRNA is released and subsequently interacts again with the probe, resulting in the cycled digestion of the DNA probe. In this case, weak electrostatic interactions between oligonucleotide fragments and CCP lead to inefficient FRET from CCP to FAM. Thus, by triggering the FRET signal from CCP to FAM, miRNA can be specially detected, and the fluorescence color change based on FRET can be visualized directly with the naked eye under an UV lamp. Furthermore, an energy transfer cascade can be designed using CCP and DNA probes labeled at the 5'-terminus with FAM and Cy3 dyes, and the multistep FRET processes offer the ability of simultaneous detection of multiplex miRNAs.

Organelle-specific bioprobes based on fluorogens with aggregation-induced emission (AIE) characteristics

A number of aggregation-induced emission (AIE) probes with high photostability and specificity have been developed for organelle imaging and image-guided cancer cell ablation.

FRET-assisted selective detection of flavins via cationic conjugated polyelectrolyte under physiological conditions

Cationic conjugated polyelectrolyte PMI performs ppb level detection and discrimination of flavins (RF, FMN and FAD) in aqueous media as well as in biological medium like serum.

Tetraphenylethene (TPE) modified polyhedral oligomeric silsesquioxanes (POSS): unadulterated monomer emission, aggregation-induced emission and nanostructural self-assembly modulated by the flexible spacer between POSS and TPE

Mono-TPE modified POSS molecules exhibit monomer and AIE emission under different conditions.

Nanowire Chemical/Biological Sensors: Status and a Roadmap for the Future

Chemiresistive sensors are becoming increasingly important as they offer an inexpensive option to conventional analytical instrumentation, they can be readily integrated into electronic devices, and they have low power requirements. Nanowires (NWs) are a major theme in chemosensor development. High surface area, interwire junctions, and restricted conduction pathways give intrinsically high sensitivity and new mechanisms to transduce the binding or action of analytes. This Review details the status of NW chemosensors with selected examples from the literature. We begin by proposing a principle for understanding electrical transport and transduction mechanisms in NW sensors. Next, we offer the reader a review of device performance parameters. Then, we consider the different NW types followed by a summary of NW assembly and different device platform architectures. Subsequently, we discuss NW functionalization strategies. Finally, we propose future developments in NW sensing to address selectivity, sensor drift, sensitivity, response analysis, and emerging applications.