Toward chronopharmaceutical drug delivery patches and biomaterial coatings for the facilitation of wound healing

Implantation of a biomaterial entails a form of injury where the integration of the implant into the host tissue greatly depends on the proper healing of the wound. Wound healing, itself, consists of a number of physiological processes, each occurring within a characteristic time window. A composite, multilayered polymeric drug delivery carrier for adhesion to the wound site and its supply with molecules released at precise time windows at which the stages in the healing process that they target occur is conceptualized here. We also present a simplified version of one such multilayered composite fabricated by a combination of solvent casting and dip coating, comprising the base poly(ε-caprolactone) layer reinforced with hydroxyapatite nanoparticles, poly(glutamic acid) mesolayer and poly-l-lysine surface layer, each loaded with specific small molecules and released at moderately distinct timescales, partially matching the chronology of wound healing. To that end, the base layer proved suitable for the delivery of an anti-inflammatory molecule or an angiogenic agent, the mesolayer appeared appropriate for the delivery of an epithelialization promoter or a granulation factor, and the adhesive surface layer interfacing directly with the site of injury showed promise as a carrier of a vasodilator. The drug release mechanisms were diffusion-driven, suggesting that the drug/carrier interaction is a key determinant of the release kinetics, as important as the nature of the polymer and its hydrolytic degradation rate in the aqueous medium. Morphological and phase composition analyses were performed, along with the cell compatibility ones, demonstrating solid adhesion and proliferation of both transformed and primary fibroblasts on both surfaces of the composite films. The design of the multilayered composite drug delivery carriers presented here is prospective, but requires further upgrades to achieve the ideal of a perfect timing of the sequential drug release kinetics and a perfect resonance with the physiological processes defining the chronology of wound healing.

DNA foams constructed by freeze drying and their optoelectronic characteristics

The distinctive properties of DNA make it a promising biomaterial to use in nanoscience and nanotechnology. In the present study, DNA foam was fabricated into multi-dimensional shapes using a freeze drying process with liquid nitrogen and 3D printed molds. The physicochemical and optoelectronic properties of the fabricated DNA foams were investigated using Fourier transform infrared (FTIR) spectrum, X-ray photoelectron spectrum (XPS), thermogravimetric analysis (TGA), ultraviolet-visible (UV-Vis) absorption spectrum, and current-voltage (I-V) characteristics to understand the changes formed in the DNA structure and their effect on properties during the fabrication of DNA foam. The FTIR and XPS analyses confirmed that nitrogen was diffusing into the DNA structure during the DNA foam fabrication. The diffused nitrogen caused a decrease in bond lengths, strong chemical bonds, compaction of DNA structure, existence of additional carbon-nitrogen bonds, and variation in the electron density of the base elements in DNA. These changes in the DNA structure of the DNA foam were reflected in their chemical, optical, and electrical properties. Furthermore, the proper utilization of DNA foams as a template for functional materials by embedding carbon nanotubes (CNTs) and thermocolor was demonstrated.

Tissue-engineered bones with adipose-derived stem cells - composite polymer for repair of bone defects

Background: Development of alternative bone tissue graft materials based on tissue engineering technology has gradually become a research focus. Engineered bone composed of biodegradable, biosafe and bioactive materials is attractive, but also challenging. Materials & methods: An adipose-derived stem cell/poly(L-glutamic acid)/chitosan composite scaffold was further developed for construction of biodegradable and bone-promoting tissue-engineered bone. A series of composite scaffold materials with different physical properties such as structure, pore size, porosity and pore diameter was developed. Results: The composite scaffold showed good biodegradability and water absorption, and exhibited an excellent ability to promote bone differentiation. Conclusion: This type of biodegradable scaffold is expected to be applied to the field of bone repair or bone tissue engineering.

Simple ultrasonic-assisted approach to prepare polysaccharide-based aerogel for cell research and histocompatibility study

Salecan, a water-soluble microbial polysaccharide with attractive biocompatible characteristics, is very suitable for aerogel fabrication. However, the practical application of salecan-based aerogels for cell culture was limited by complicated preparation method, lack of cell anchorage signals, and the ability to modulate this properly. Here, a smart aerogel was designed by ultrasonic-assisted self-assembly of salecan and cationic starch (CAS) without any organic and toxic crosslinkers. The ultrasound waves generated a marked impact on self-assemble process by means of ultrasonic cavitation. Aerogel network was produced by strong electrostatic attractions between the polysaccharides. Especially, salecan/CAS ratio can be precisely modulated to tailor the hydrophilicity, mechanical stiffness, and morphologic property. The specific surface area of the aerogels gradually increased with the increase in salecan/CAS ratio. These aerogels were non-cytotoxic, and the incorporation of salecan into them promoted cell-matrix interactions by directionally supporting cell adhesion and proliferation. Most strikingly, in vivo experiment revealed that the histological features in the main organs of the mice were similar to those observed in the PBS-treated control group, and no sign of the histopathological abnormality or tissue destruction was observed, indicating the excellent histocompatibility of the aerogels. This study offered a new and powerful avenue to fabricate functional biomaterial.

Hydroxyapatite Nanoparticles Fortified Xanthan Gum-Chitosan Based Polyelectrolyte Complex Scaffolds for Supporting the Osteo-Friendly Environment

Nanoparticle-reinforced polymer-based scaffolding matrices as artificial bone-implant materials are potential suitors for bone regenerative medicine as they simulate the native bone. In the present work, a series of bioinspired, osteoconductive tricomposite scaffolds made up of nano-hydroxyapatite (NHA) embedded xanthan gum-chitosan (XAN-CHI) polyelectrolyte complex (PEC) are explored for their bone-regeneration potential. The Fourier transform infrared spectroscopy studies confirmed complex formation between XAN and CHI and showed strong interactions between the NHA and PEC matrix. The X-ray diffraction studies indicated regulation of the nanocomposite (NC) scaffold crystallinity by the physical cues of the PEC matrix. Further results exhibited that the XAN-CHI/NHA5 scaffold, with a 50/50 (polymer/NHA) ratio, has optimized porous structure, appropriate compressive properties, and sufficient swelling ability with slower degradation rates, which are far better than those of CHI/NHA and other XAN-CHI/NHA NC scaffolds. The simulated body fluid studies showed XAN-CHI/NHA5 generated apatite-like surface structures of a Ca/P ratio ∼1.66. Also, the in vitro cell-material interaction studies with MG-63 cells revealed that relative to the CHI/NHA NC scaffold, the cellular viability, attachment, and proliferation were better on XAN-CHI/NHA scaffold surfaces, with XAN-CHI/NHA5 specimens exhibiting an effective increment in cell spreading capacity compared to XAN-CHI/NHA4 and XAN-CHI/NHA6 specimens. The presence of an osteo-friendly environment is also indicated by enhanced alkaline phosphatase expression and protein adsorption ability. The higher expression of extracellular matrix proteins, such as osteocalcin and osteopontin, finally validated the induction of differentiation of MG-63 cells by tricomposite scaffolds. In summary, this study demonstrates that the formation of PEC between XAN and CHI and incorporation of NHA in XAN-CHI PEC developed tricomposite scaffolds with robust potential for use in bone regeneration applications.

Synthesis of Multiarm Peptide Dendrimers for Dual Targeted Thrombolysis

Current thrombolytic agents generally possess low specificity and pose a high risk of intracranial hemorrhage. Here, various generations of multiarm polylactic acid-polyglutamic acid peptide dendrimers were synthesized, and then nattokinase-combining magnetic Fe₃O₄ nanoparticles and RGD-modified dendrimers (Fe₃O₄-(4-PLA(G₃)₄)-RGD) were fabricated for targeted thrombi dissolution. Their in vitro and in vivo thrombolytic properties were determined. In vitro determination indicated that Fe₃O₄-(4-PLA(G₃)₄)-RGD/nattokinase provided 3-fold higher blood clot dissolution than that obtained with free nattokinase. An in vivo thrombolytic examination revealed that most of the thrombi were dissolved under an external magnetic field. In addition, there were many nanoparticles in vascular endothelial cells, demonstrating the RGD and magnetic dual targeting capacity of Fe₃O₄-(4-PLA(G₃)₄)-RGD/nattokinase. These results demonstrated that Fe₃O₄-(4-PLA(G₃)₄)-RGD nanoparticles not only will deliver targeted thrombolytic agents to enhance the efficacy of site-specific thrombolytic treatment but also have potential in the diagnosis of thrombotic disease in its early stages.

Electroactive polymers for tissue regeneration: Developments and perspectives

Human body motion can generate a biological electric field and a current, creating a voltage gradient of -10 to -90 mV across cell membranes. In turn, this gradient triggers cells to transmit signals that alter cell proliferation and differentiation. Several cell types, counting osteoblasts, neurons and cardiomyocytes, are relatively sensitive to electrical signal stimulation. Employment of electrical signals in modulating cell proliferation and differentiation inspires us to use the electroactive polymers to achieve electrical stimulation for repairing impaired tissues. Electroactive polymers have found numerous applications in biomedicine due to their capability in effectively delivering electrical signals to the seeded cells, such as biosensing, tissue regeneration, drug delivery, and biomedical implants. Here we will summarize the electrical characteristics of electroactive polymers, which enables them to electrically influence cellular function and behavior, including conducting polymers, piezoelectric polymers, and polyelectrolyte gels. We will also discuss the biological response to these electroactive polymers under electrical stimulation. In particular, we focus this review on their applications in regenerating different tissues, including bone, nerve, heart muscle, cartilage and skin. Additionally, we discuss the challenges in tissue regeneration applications of electroactive polymers. We conclude that electroactive polymers have a great potential as regenerative biomaterials, due to their ability to stimulate desirable outcomes in various electrically responsive cells.

Hydrogel scaffolds for differentiation of adipose-derived stem cells

Natural extracellular matrices (ECMs) have been widely used as a support for the adhesion, migration, differentiation, and proliferation of adipose-derived stem cells (ADSCs). However, poor mechanical behavior and unpredictable biodegradation properties of natural ECMs considerably limit their potential for bioapplications and raise the need for different, synthetic scaffolds. Hydrogels are regarded as the most promising alternative materials as a consequence of their excellent swelling properties and their resemblance to soft tissues. A variety of strategies have been applied to create synthetic biomimetic hydrogels, and their biophysical and biochemical properties have been modulated to be suitable for cell differentiation. In this review, we first give an overview of common methods for hydrogel preparation with a focus on those strategies that provide potential advantages for ADSC encapsulation, before summarizing the physical properties of hydrogel scaffolds that can act as biological cues. Finally, the challenges in the preparation and application of hydrogels with ADSCs are explored and the perspectives are proposed for the next generation of scaffolds.

Effects of large dimensional deformation of a porous structure on stem cell fate activated by poly(l-glutamic acid)-based shape memory scaffolds

The effects of mechanostructural stimuli on stem cell fate in 3D structures have been investigated in a poly(l-glutamic acid)-based shape memory porous scaffold; the results indicate the scaffold a potential cell carrier.

Preparation of Chitosan/Poly‐γ‐Glutamic Acid Polyelectrolyte Multilayers on Biomedical Metals for Local Antibiotic Delivery

Polyelectrolyte multilayer assembly is one of the most widely applied biomaterial coatings for applications from surface modification, drug delivery, tissue engineering to biomimetic extracellular environment. In this research, we propose a simple layer-wise spin coating technique to prepare chitosan/poly-γ-glutamic acid (C/PGA) polyelectrolyte multilayers (PEMs) on two different biomedical metals, 316L stainless steel (316LSS) and titanium alloy (Ti6Al4V). The multilayer coating was fabricated using oppositely charged chitosan and poly--glutamic acid to deposit a total of 10, 20, or 30 multilayered films. Afterward, tetracycline was loaded by soaking the coated metals for 12 hours. The microstructure, mechanical properties, biocompatibility and drug release rate were investigated by scanning electron microscopy, contact angle measurement, MG63 cell viability and inhibition of Escherichia coli (E. coli) growth. Lastly, MG63 cell attachment was detected by fluorescence microscopy after staining with Hoechst 33258. This coating technique can prepare a layer of 2.2–6.9 m C/PGA PEMs favoring cell attachment and growth. Moreover, tetracycline was released from C/PGA PEMs and inhibited the growth of E. coli. The results suggest that C/PGA PEMs provide a useful platform for modulating the micro-environment for better cell adhesion and antibiotic delivery, which hold great potential for surface modification and drug loading for biomimetic materials.

Templated fabrication of pH-responsive poly(l-glutamic acid) based nanogels via surface-grafting and macromolecular crosslinking

A novel class of pH-responsive poly(l-glutamic acid)/chitosan (PLGA/CS) nanogels was fabricated by a templating approach, combined with a “grafting from” method and intermacromolecular crosslinking technique.

Fabrication of injectable hydrogels based on poly(l-glutamic acid) and chitosan

The in situ forming hydrogels based on oppositely charged poly(l-glutamic acid) (PLGA) and chitosan (CS) were prepared via a Schiff base crosslinking reaction.

Regeneration of hyaline-like cartilage and subchondral bone simultaneously by poly(l-glutamic acid) based osteochondral scaffolds with induced autologous adipose derived stem cells

Osteochondral tissue engineering is challenged by the difficulty in the regeneration of hyaline cartilage and the simultaneous regeneration of subchondral bone. In the present study, nhydroxyapatite-graft-poly(l-glutamic acid) (nHA-g-PLGA) was prepared by surface-initiated ring-opening polymerization, which was then used to fabricate an osteogenic scaffold (scaffold O) instead of nHA to achieve better mechanical performance. Then, a single osteochondral scaffold was fabricated by combining the poly(l-glutamic acid) (PLGA)/chitosan (CS) amide bonded hydrogel and the PLGA/CS/nHA-g-PLGA polyelectrolyte complex (PEC), possessing two different regions to support both hyaline cartilage and underlying bone regeneration, respectively. Autologous adipose derived stem cells (ASCs) were seeded into the osteochondral scaffold. The chondrogenesis of ASCs in the scaffold was triggered in vitro by TGF-β1 and IGF-1 for 7 days. In vitro, a chondrogenic scaffold (scaffold C) exhibited the ability to drive adipose derived stem cell (ASC) aggregates to form multicellular spheroids with a diameter of 80-110 μm in situ, thus promoting the chondrogenesis while limiting COL I deposition when compared to ASCs adhered in scaffold O. Scaffold O showed the ability to bind abundant BMP-2. Osteochondral scaffolds with induced ASC spheroids in scaffold C and bonded BMP-2 in scaffold O were transplanted into rabbit osteochondral defects as group I for in vivo regeneration. At the same time, osteochondral scaffolds with only bonded BMP-2 in scaffold O and bare osteochondral scaffolds were filled into rabbit osteochondral defects to serve as group II and group III, respectively. After 12 weeks post-implantation, cartilage and subchondral bone tissues were both regenerated with the support of induced ASC spheroids and bonded BMP-2 in group I. However, in group II, cartilage was not repaired while subchondral bone was regenerated. In group III, the regeneration of both cartilage and subchondral bone was limited.

Injectable in situ forming poly(l-glutamic acid) hydrogels for cartilage tissue engineering

Injectable, in situ forming hydrogels have exhibited many advantages in regenerative medicine. Herein, we present the novel design of poly(l-glutamic acid) injectable hydrogels via the self-crosslinking of adipic dihydrazide (ADH)-modified poly(l-glutamic acid) (PLGA-ADH) and aldehyde-modified poly(l-glutamic acid) (PLGA-CHO), and investigate their potential in cartilage tissue engineering. Both the hydrazide modification degree of PLGA-ADH and oxidation degree of PLGA-CHO can be adjusted by the amount of activators and sodium periodate, respectively. Experiments reveal that the solid content of the hydrogels, -NH₂/-CHO molar ratio, and oxidation degree of PLGA-CHO have a great effect on the gelation time, equilibrium swelling, mechanical properties, microscopic morphology, and in vitro degradation of the hydrogels. Encapsulation of rabbit chondrocytes within the hydrogels showed viability of the entrapped cells and cytocompatibility of the injectable hydrogels. A preliminary study exhibits injectability and rapid in vivo gel formation, as well as mechanical stability, cell ingrowth, and ectopic cartilage formation. These results suggest that the PLGA hydrogel has potential as an injectable cell delivery carrier for cartilage regeneration and could serve as a new biomaterial for tissue engineering.

Tailor-made poly(l-lactide)/poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds prepared via high-pressure compression molding/salt leaching

The degradation rate, hydrophilicity, and mechanical properties of PLLA/PLGA/HA scaffolds can be tuned by adjusting the composition. Such tailor-made scaffolds are hopeful to address the specific requirements of the regenerated tissue.

Poly(ornithine-co-arginine-co-glycine-co-aspartic Acid): Preparation via NCA Polymerization and its Potential as a Polymeric Tumor-Penetrating Agent

A novel random copolypeptide of ornithine, arginine, glycine, and aspartic acid [Poly(ornithine-co-arginine-co-glycine-co-aspartic acid), Poly(O,R,G,D)] has been prepared through ring-opening polymerization of N-δ-carbobenzoxy-l-ornithine N-carboxyanhydride [Orn(Cbz)-NCA)], l-glycine N-carboxyanhydride (Gly-NCA) and β-benzyl l-aspartate N-carboxyanhydride [Asp(Bn)-NCA], following by subsequent deprotection and guanidization. The structure of Poly(O,R,G,D) was confirmed by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). Low cytotoxicity of Poly(O,R,G,D) was confirmed from MTT assay. The Poly(O,R,G,D) contain some internal sequences of RXXR (X = O, R, G, or D) that could be proteolytically cleaved to expose the cryptic CendR element and bind to Neuropilin-1. This would lead to vascular and tissue permeabilization. Therefore trypsin-cleaved Poly(O,R,G,D) increase the vascular leakage of Evans blue from dermal microvessels at the injection site in vivo skin permeability assay. The intratumoral injection of the Poly(O,R,G,D) significantly enhanced the concentration of cisplatin-loaded nanoparticles in MCF-7 solid tumors. These results show that Poly(O,R,G,D) could increase the vascular leakage and tissue penetration of nanoparticles in a solid tumor and can be used as a potential polymeric tumor-penetrating agent.

Surface modification of silk fibroin fabric using layer-by-layer polyelectrolyte deposition and heparin immobilization for small-diameter vascular prostheses

There is an urgent need to develop a biologically active implantable small-diameter vascular prosthesis with long-term patency. Silk-fibroin-based small-diameter vascular prosthesis is a promising candidate having higher patency rate; however, the surface modification is indeed required to improve its further hemocompatibility. In this study, silk fibroin fabric was modified by a two-stage process. First, the surface of silk fibroin fabric was coated using a layer-by-layer polyelectrolyte deposition technique by stepwise dipping the silk fibroin fabric into a solution of cationic poly(allylamine hydrochloride) (PAH) and anionic poly(acrylic acid) (PAA) solution. The dipping procedure was repeated to obtain the PAH/PAA multilayers deposited on the silk fibroin fabrics. Second, the polyelectrolyte-deposited silk fibroin fabrics were treated in EDC/NHS-activated low-molecular-weight heparin (LMWH) solution at 4 °C for 24 h, resulting in immobilization of LMWH on the silk fibroin fabrics surface. Scanning electron microscopy, atomic force microscopy, and energy-dispersive X-ray data revealed the accomplishment of LMWH immobilization on the polyelectrolyte-deposited silk fibroin fabric surface. The higher the number of PAH/PAA coating layers on the silk fibroin fabric, the more surface hydrophilicity could be obtained, resulting in a higher fetal bovine serum protein and platelets adhesion resistance properties when tested in vitro. In addition, compared with untreated sample, the surface-modified silk fibroin fabrics showed negligible loss of bursting strength and thus reveal the acceptability of polyelectrolytes deposition and heparin immobilization approach for silk-fibroin-based small-diameter vascular prostheses modification.

The formation of biodegradable micelles from a therapeutic initiator for enzyme-mediated drug delivery

The direct grafting of amphiphilic macromolecules by sequentialn-carboxyanhydride ring-opening polymerisation (NCA ROP) from a therapeutic initiator enables the formation of monodisperse drug-containing micelles.

Effects of RGD nanospacing on chondrogenic differentiation of mesenchymal stem cells

RGD nanopatterns were generated on nonfouling PEG hydrogels to explore the effects of RGD nanospacing on adhesion and chondrogenic differentiation of mesenchymal stem cells.

Design of chitosan and its water soluble derivatives-based drug carriers with polyelectrolyte complexes

Chitosan, the cationic polysaccharide derived from the natural polysaccharide chitin, has been studied as a biomaterial for more than two decades. As a polycationic polymer with favorable properties, it has been widely used to form polyelectrolyte complexes with polyanions for various applications in drug delivery fields. In recent years, a growing number of studies have been focused on the preparation of polyelectrolyte complexes based on chitosan and its water soluble derivatives. They have been considered well-suited as biomaterials for a number of vital drug carriers with targeted/controlled release profiles, e.g., films, capsules, microcapsules. In this work, an overview highlights not only the favorable properties of chitosan and its water soluble derivatives but also the good performance of the polyelectrolyte complexes produced based on chitosan. Their various types of applications as drug carriers are reviewed in detail.

Injectable in situ self-cross-linking hydrogels based on poly(L-glutamic acid) and alginate for cartilage tissue engineering

Injectable hydrogels as an important biomaterial class have been widely used in regenerative medicine. A series of injectable poly(l-glutamic acid)/alginate (PLGA/ALG) hydrogels were fabricated by self-cross-linking of hydrazide-modified poly(l-glutamic acid) (PLGA-ADH) and aldehyde-modified alginate (ALG-CHO). Both the degree of PLGA modification and the oxidation degree of ALG-CHO could be adjusted by the amount of activators and sodium periodate, respectively. The effect of the solid content of the hydrogels and oxidation degree of ALG-CHO on the gelation time, equilibrium swelling, mechanical properties, microscopic morphology, and in vitro degradation of the hydrogels was examined. Encapsulation of rabbit chondrocytes within hydrogels showed viability of the entrapped cells and good biocompatibility of the injectable hydrogels. A preliminary study exhibited injectability and rapid in vivo gel formation, as well as mechanical stability, cell ingrowth, and ectopic cartilage formation. The injectable PLGA/ALG hydrogels demonstrated attractive properties for future application in a variety of pharmaceutical delivery and tissue engineering, especially in cartilage tissue engineering.

Synthesis and characterization of a novel hydrogel: salecan/polyacrylamide semi-IPN hydrogel with a desirable pore structure

Salecan is a novel water-soluble β-glucan produced by a salt-tolerant strain Agrobacterium sp. ZX09 which was isolated from a soil sample in our laboratory and the 16S rDNA sequence of this novel strain was deposited in the GenBank database under the accession number GU810841. Salecan has excellent physicochemical properties and can be used in industries such as food and medicine. In this paper, novel semi-interpenetrating polymer network (semi-IPN) hydrogels based on salecan and polyacrylamide (PAAm) were synthesized by radical polymerization/cryopolymerization and semi-IPN techniques. The resulting hydrogels with different salecan/PAAm composition ratios and preparation temperatures were characterized using FTIR, XRD, TGA and SEM measurements. The semi-IPNs exhibited a homogeneous porous architecture with a tunable pore size in a very broad range of 5-150 μm. Furthermore, swelling behaviors of the hydrogels were also studied to investigate the response properties of the hydrogels. The hydrogels obtained at subzero temperature can attain the equilibrium state in water within 260 seconds. Mechanical measurements showed that all semi-IPNs possessed good mechanical properties. In vitro degradation was also studied in PBS solution. Cytotoxicity results suggested that semi-IPN hydrogels were non-toxic to COS-7 cells. A cell culture experiment performed using COS-7 cells revealed their appropriateness for cell adhesion. Together, these results make salecan/PAAm semi-IPNs promising materials for biomedical applications.

Poly(L-glutamic acid)/chitosan polyelectrolyte complex porous microspheres as cell microcarriers for cartilage regeneration

In this study a novel kind of porous poly(l-glutamic acid) (PLGA)/chitosan polyelectrolyte complex (PEC) microsphere was developed through electrostatic interaction between PLGA and chitosan. By adjusting the formula parameters chitosan microspheres with an average pore size of 47.5 ± 5.4 μm were first developed at a concentration of 2 wt.% and freeze temperature of -20 °C. For self-assembly of the PEC microspheres porous chitosan microspheres were then incubated in PLGA solution at 37 °C. Due to electrostatic interaction a large amount of PLGA (110.3 μg mg(-1)) was homogeneously absorbed within the chitosan microspheres. The developed PEC microspheres retained their original size, pore diameters and interconnected porous structure. Fourier transform infrared spectroscopy, thermal gravimetric analysis and zeta potential analysis revealed that the PEC microspheres were successfully prepared through electrostatic interaction. Compared with microspheres fabricated from chitosan, the porous PEC microspheres were shown to efficiently promote chondrocyte attachment and proliferation. After injection subcutaneously for 8 weeks PEC microspheres loaded with chondrocytes were found to produce significant more cartilaginous matrix than chitosan microspheres. These results indicate that these novel fabricated porous PLGA/chitosan PEC microspheres could be used as injectable cell carriers for cartilage tissue engineering.

Preparation and characterization of bimodal porous poly(γ-benzyl-L-glutamate) scaffolds for bone tissue engineering

An ideal scaffold in bone tissue-engineering strategy should provide biomimetic extracellular matrix-like architecture and biological properties. Poly(γ-benzyl-L-glutamate) (PBLG) has been a popular model polypeptide for various potential biomedical applications due to its good biocompatibility and biodegradability. This study developed novel bimodal porous PBLG polypeptide scaffolds via a combination of biotemplating method and in situ ring-opening polymerization of γ-benzyl-L-gIutamate N-carboxyanhydride (BLG-NCA). The PBLG scaffolds were characterized by proton nuclear magnetic resonance spectroscopy, X-ray diffraction, differential scanning calorimetry, scanning electron microscope (SEM) and mechanical test. The results showed that the semi-crystalline PBLG scaffolds exhibited an anisotropic porous structure composed of honeycomb-like channels (100-200 μm in diameter) and micropores (5-20 μm), with a very high porosity of 97.4±1.6%. The compressive modulus and glass transition temperature were 402.8±20.6 kPa and 20.2°C, respectively. The in vitro biocompatibility evaluation with MC3T3-E1 cells using SEM, fluorescent staining and MTT assay revealed that the PBLG scaffolds had good biocompatibility and favored cell attachment, spread and proliferation. Therefore, the bimodal porous polypeptide scaffolds are promising for bone tissue engineering.

Chitosan stabilizes platelet growth factors and modulates stem cell differentiation toward tissue regeneration

The idea of using chitosan as a functional delivery aid to support simultaneously PRP, stem cells and growth factors (GF) is associated with the intention to use morphogenic biomaterials to modulate the natural healing sequence in bone and other tissues. For example, chitosan-chondroitin sulfate loaded with platelet lysate was included in a poly(D,L-lactate) foam that was then seeded with human adipose-derived stem cells and cultured in vitro under osteogenic stimulus: the platelet lysate provided to the bone tissue the most suitable assortment of GF which induces the osteogenic differentiation of the mesenchymal stem cells. PDGF, FGF, IGF and TGF-β were protagonists in the repair of callus fractures. The release of GF from the composites of chitosan-PRP and either nano-hydroxyapatite or tricalcium phosphate was highly beneficial for enhancing MSC proliferation and differentiation, thus qualifying chitosan as an excellent vehicle. A number of biochemical characteristics of chitosan exert synergism with stem cells in the regeneration of soft tissues.