Aptamer-linked biosensor for thrombin based on AuNPs/thionine-graphene nanocomposite

Molecularly imprinted electrochemical biosensor for thrombin detection by comparing different monomers

Aim: Investigating molecularly imprinted polymers (MIPs) in electrochemical biosensors for thrombin detection, an essential protein biomarker. Comparing different monomers to showcase distinct sensitivity, specificity and stability advantages. Materials & methods: Dopamine, thionine and ethanolamine serve as monomers for MIP synthesis. Electrochemical methods and atomic force microscopy characterize sensor surfaces. Performance is evaluated, emphasizing monomer-specific electrochemical responses. Results: Monomer-specific electrochemical responses highlight dopamine's superior signal change and stability over 30 days. Notably, a low 5 pg/ml limit of detection, a broad linear range (5-200 pg/ml) and enhanced selectivity against interferents are observed. Conclusion: Dopamine-based MIPs show promise for high-performance electrochemical thrombin biosensors, suggesting significant applications in clinical diagnostics.

Highly Sensitive Detection of Chymotrypsin Based on Metal Organic Frameworks with Peptides Sensors

In this study, peptides and composite nanomaterials based on copper nanoclusters (CuNCs) were used to detect chymotrypsin. The peptide was a chymotrypsin-specific cleavage peptide. The amino end of the peptide was covalently bound to CuNCs. The sulfhydryl group at the other end of the peptide can covalently combine with the composite nanomaterials. The fluorescence was quenched by fluorescence resonance energy transfer. The specific site of the peptide was cleaved by chymotrypsin. Therefore, the CuNCs were far away from the surface of the composite nanomaterials, and the intensity of fluorescence was restored. The limit of detection (LOD) using Porous Coordination Network (PCN)@graphene oxide (GO) @ gold nanoparticle (AuNP) sensor was lower than that of using PCN@AuNPs. The LOD based on PCN@GO@AuNPs was reduced from 9.57 pg mL^-1 to 3.91 pg mL^-1. This method was also used in a real sample. Therefore, it is a promising method in the biomedical field.

Highly sensitive host-guest mode homogenous electrochemical thrombin signal amplification aptasensor based on tetraferrocene label

The development of sensitive and convenient detection methods to monitor thrombin without the use of enzymes or complex nanomaterials is highly desirable for the diagnosis of cardiovascular diseases. In this article, tetraferrocene was first synthesized and then a sensitive and homogeneous electrochemical aptasensor was developed for thrombin detection based on host-guest recognition between tetraferrocene and β-cyclodextrin (β-CD). In the absence of thrombin, the double stem-loop of thrombin aptamer (TBA) prevented tetraferrocenes labeled at both ends from entering the cavity of β-CD deposited on gold electrode surface. After binding with thrombin, the stem-loop structure of TBA opened and transformed into special G-quarter structure, forcing tetraferrocene into the cavity of β-CD. As a result, thrombin allowed eight ferrocene molecules to reach the gold electrode surface, greatly amplifying the response signal. The obtained aptasensors showed dynamic detection range from 4 pM to 12.5 nM with detection limit around 1.2 pM. Overall, the results indicate that the proposed aptasensors are promising for future rapid clinical detection of thrombin and development of signal amplification strategies for detection of various proteins.

Perspective on chymotrypsin detection

Chymotrypsin is one of the most extensively known proteases participating in the pathogenesis of various diseases, which can be used in drug discovery and clinical diagnosis.

Development of a Label-Free Electrochemical Aptasensor for the Detection of Tau381 and its Preliminary Application in AD and Non-AD Patients' Sera

The electrochemical aptamer sensor has been designed for detecting tau381, a critical biomarker of Alzheimer's disease in human serum. The aptasensor is obtained by immobilizing the aptamer on a carboxyl graphene/thionin/gold nanoparticle modified glassy-carbon electrode. As a probe and bridge molecule, thionin connected carboxyl graphene and gold nanoparticles, and gave the electrical signal. Under optimal conditions, the increment of differential pulse voltammetry signal increased linearly with the logarithm of tau381 concentration in the range from 1.0 pM to 100 pM, and limit of detection was 0.70 pM. The aptasensor reliability was evaluated by determining its selectivity, reproducibility, stability, detection limit, and recovery. Performance analysis of the tau381 aptasensor in 10 patients' serum samples showed that the aptasensor could screen patients with and without Alzheimer's disease. The proposed aptasensor has potential for use in clinically diagnosing Alzheimer's disease in the early stage.

Recent Advances on Electrochemical Biosensing Strategies toward Universal Point-of-Care Systems

A number of very recently developed electrochemical biosensing strategies are promoting electrochemical biosensing systems into practical point-of-care applications. The focus of research endeavors has transferred from detection of a specific analyte to the development of general biosensing strategies that can be applied for a single category of analytes, such as nucleic acids, proteins, and cells. In this Minireview, recent cutting-edge research on electrochemical biosensing strategies are described. These developments resolved critical challenges regarding the application of electrochemical biosensors to practical point-of-care systems, such as rapid readout, simple biosensor fabrication method, ultra-high detection sensitivity, direct analysis in a complex biological matrix, and multiplexed target analysis. This Minireview provides general guidelines both for scientists in the biosensing research community and for the biosensor industry on development of point-of-care system, benefiting global healthcare.

An electrochemical tyrosinamide aptasensor using a glassy carbon electrode modified by N-acetyl-l-cysteine-capped Ag-In-S QDs

This paper reports an aptamer-based green approach for the electrochemical evaluation of tyrosinamide (Tyr-NH₂). In this regard, at the first step, an aqueous synthetic strategy for preparing N-acetyl-l-cysteine (NAC)-capped Ag-In-S (AIS) quantum dots (QDs) with bright yellow/orange emission was developed. The conjugation of AIS QDs to NAC-biomolecules provides opportunities for using them as luminescent contrast agents for living cell tracking and labeling or sensing studies. In the next step, the design stage of the aptasensor, the glassy carbon electrode (GCE) was modified with the AIS QDs and then the Tyr-NH₂ special aptamer, which has an amine group at its end, interacts with silver and indium ions at the surface of the AIS QDs and through the formation of covalent bonding of AgN and InN, attaches to the GCE surface modified with the AIS QDs. In this approach, for the first time, NAC-capped AIS QDs have been used to modify the electrode surface in the aptamer-based electrochemical sensor. The response changes of the [Fe(CN)₆]^4-/3- as redox probe, during the modification of GCE surface, the fabrication and assessment of proposed aptasensing, using the cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy were recorded. The designed aptasensor for the Tyr-NH₂ evaluation showed good linearity from 0.01 to 2.81 nM and 2.81-10.81 nM, and low detection limit of 3.34 pM. The obtained results of the stability, reproducibility and selectivity investigations implying that the reported aptasensor as the first aptamer-based electrochemical assay for Tyr-NH₂, can be reliable for the determination of Tyr-NH₂ in serum samples.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Electrically-transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high-performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical perspective, are summarized for four different groups of analytes: gases, volatile compounds, ions, and biomolecules. The sensing performance is discussed in the context of the molecular design, structure-property relationships, and device fabrication technology. The outlook of challenges and opportunities for 2D nanomaterials for the future development of electrically-transduced sensors is also presented.

Controllable n-Fe2O3@graphene nanomaterials by ALD applied in an aptasensor with enhanced electrochemical performance for thrombin detection

An elegant atomic layer deposition (ALD) method has been employed for the controllable preparation of a uniform Fe₂O₃-coated graphene nanostructure (Fe₂O₃@graphene). The Fe₂O₃ coating thickness of the Fe₂O₃@graphene nanostructure can be tuned by varying the cycle number of Fe₂O₃ ALD. The produced Fe₂O₃@graphene composites are characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and cyclic voltammetry (CV). It is revealed that Fe₂O₃ is effectively deposited on the surface of graphene. Combined with the high affinity and specificity of an aptamer, a simple, rapid and sensitive electrochemical aptasensor was successfully fabricated for thrombin detection. The resulting electrochemical aptasensor displays a linear response to thrombin in the 1.0 × 10^-11 to 4.0 × 10^-9 M concentration range with the detection limit of 1.0 × 10^-12 M (at an S/N of 3). The described controllable multifunctional graphene nanomaterials from ALD are expected to be applied in a biosensing platform which will exhibit wide applications in biological, medical, and environmental fields.

Target-programmed and autonomous proximity binding aptasensor for amplified electronic detection of thrombin

The development of sensitive and simple approaches capable of monitoring trace amounts of protein biomarkers is appealing for disease diagnosis and treatment. Towards this end, we have developed an electrochemical sensing platform for sensitive and simple detection of protein biomarkers by using thrombin as the model target molecules via a target-programmed proximity binding amplification approach. The binding of thrombin to the aptamer sequences in the partial dsDNA duplex probes induces the release of the ssDNA trigger strands, which catalyze subsequent assembly formation of many methylene blue (MB)-tagged proximate DNA motifs with the presence of the DNA fuel strands through cascaded toehold-mediated strand displacement reactions. Due to the proximity-binding effect, these MB-tagged proximate DNA motifs anneal with the capture probes on the sensor surface with significantly enhanced stability against the corresponding single component counterpart, thereby pulling the MB tags close to the sensor surface and generating substantially amplified signal responses for sensitive determination of thrombin down to 23.6 pM. In addition, such aptasensor can specifically discriminate thrombin from other interference proteins, and can also be utilized to monitor thrombin in diluted serum samples, demonstrating its great potential for sensitive determination of proteins for early disease diagnosis.

Modifications of Au Nanoparticle-Functionalized Graphene for Sensitive Detection of Sulfanilamide

In this paper, we present a simple and feasible electrochemical sensor based on Au nanoparticle-functionalized graphene for the determination of sulfanilamide. Au nanoparticles were deposited on graphene, which acted as a platform to prepare excellent nanocomposites. Attributed to the graphene’s large surface area and the Au nanoparticles’ strong conductivity, many sulfanilamide molecules were enriched on the sensor surface and the signal response became more sensitive. Under the optimal conditions, the electrochemical sensors could be used for the efficient detection of sulfanilamide. Good linearity was observed in the range of 0.1–1000 μmol·L⁻¹ and the detection limit was 0.011 μmol·L⁻¹. Most importantly, the Au nanoparticle-functionalized graphene-modified electrode could be successfully applied for the detection of sulfanilamide in animal meat, and exhibited good stability, acceptable recovery, and offered a promising platform for point-of-care detecting in real samples.

Towards the electrochemical diagnostic of influenza virus: development of a graphene–Au hybrid nanocomposite modified influenza virus biosensor based on neuraminidase activity

An effective electrochemical influenza A biosensor based on a graphene–gold (Au) hybrid nanocomposite modified Au-screen printed electrode has been developed.

Electrochemical determination of thrombin with molecularly imprinted polymers and multiwalled carbon nanotubes

The preparation and application of reagentless electrochemical thrombin molecularly imprinted sensors were studied using multiwalled carbon nanotubes as sensitivity-enhanced materials. The molecularly imprinted polymer film was prepared by the electropolymerization of o-phenylenediamine with thrombin as the template molecule onto the surface of multiwalled carbon nanotubes modified glassy carbon electrode. After removing thrombin, the poly-o-phenylenediamine molecularly imprinted film was obtained with specific recognition for thrombin. Using the poly-o-phenylenediamine molecularly imprinted polymers as the electron probe, the electrochemical molecularly imprinted sensor was fabricated for the detection of the protein thrombin. Under optimized experimental conditions, the sensor exhibited a good linear response from 10.0 fg/mL to 1.0 μg/mL for thrombin, with correlation coefficient 0.999 and a low detection limit of 1.7 fg/mL. The fabricated molecularly imprinted sensor can be applied to the detection of thrombin in actual sample bovine serum with satisfactory results.

Development of a ssDNA aptamer for detection of residual benzylpenicillin

Antibiotics are useful for improving the living conditions of livestock. However, residual antibiotics induce several human diseases such as food-borne illness and infection of carbapenem-resistant Enterobacteriaceae (CRE). In this study, the identification of a benzylpenicillin-specific aptamer was selected by rGO-SELEX (reduced Graphene Oxide-Systematic Evolution of Ligands by EXponential enrichment). A random ssDNA library was incubated with rGO for adsorption and eluted with benzylpenicillin. As a result of the selection process, a DNA aptamer was found that specifically bound to benzylpenicillin with high binding affinity, K_d = 383.4 nM, and had a low limit of detection (LOD) of 9.2 nM. The characterization of the aptamer was performed through the fluorescence recovery signal from rGO surface. In addition, detection of benzylpenicillin was performed in pretreated milk samples, and its detection accuracy was shown to be 100± 10%. This represented that BBA1 was used for fluorescence aptasensor system in real sample. Furthermore, this benzylpenicillin binding aptamer showed high specificity against other antibiotics except for ampicillin. With these advantageous characteristics, we expect that this aptamer could be applied to an on-site detection system for residual benzylpenicillin.

Ultrasensitive electrochemical aptasensor for the detection of thrombin based on dual signal amplification strategy of Au@GS and DNA-CoPd NPs conjugates

In this work, an ultrasensitive electrochemical aptasensor for the detection of thrombin was developed based on Au nanoparticles decorated graphene sheet (Au@GS) and CoPd binary nanoparticles (CoPd NPs). A sulfydryl-labeled thrombin capture probe (Apt1) and a biotin-labeled thrombin reporter probe (Apt2) were designed to achieve a sandwich-type strategy. Au@GS was used as a sensing platform for the facile immobilization of Apt1 through Au-S bond, forming a sensing interface for thrombin. The specific recognition of thrombin induced the attachment of Apt2-CoPd NPs to the electrode. The labeled CoPd NPs showed good catalytic properties toward the reduction of H2O2, resulting in an amperometric signal. The amperometric response was correlated to the thrombin concentration in sample solutions. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) confirmed the successful fabrication of the aptasensor. A linear response to thrombin in the range of 0.01-2.00 ng mL(-1) with a low detection limit (5 pg mL(-1)) was achieved. The proposed aptasensor showed good selectivity, good reproducibility and acceptable stability. This proposed strategy may find many potential applications in the detection of other biomolecules.

Carbon nanomaterials-based electrochemical aptasensors

Carbon nanomaterials (CNMs) have attracted increasing attention due to their unique electrical, optical, thermal, mechanical and chemical properties. CNMs are extensively applied in electronic, optoelectronic, photovoltaic and sensing devices fields, especially in bioassay technology. These excellent properties significantly depend on not only the functional atomic structures of CNMs, but also the interactions with other materials, such as gold nanoparticles, SiO2, chitosan, etc. This review systematically summarizes applications of CNMs in electrochemical aptasensors (ECASs). Firstly, definition and development of ECASs are introduced. Secondly, different ways of ECASs about working principles, classification and construction of CNMs are illustrated. Thirdly, the applications of different CNMs used in ECASs are discussed. In this review, different types of CNMs are involved such as carbon nanotubes, graphene, graphene oxide, etc. Besides, the newly emerging CNMs and CNMs-based composites are also discoursed. Finally, we demonstrate the future prospects of CNMs-based ECASs, and some suggestions about the near future development of CNMs-based ECASs are highlighted.

Liquid-Crystal Biosensor Based on Nickel-Nanosphere-Induced Homeotropic Alignment for the Amplified Detection of Thrombin

A new liquid-crystal (LC)-based sensor operated by nickel nanosphere (NiNS)-induced homeotropic alignment for the label-free monitoring of thrombin was reported. When doped with NiNSs, a uniform vertical orientation of 4-cyano-4'-pentylbiphenyl (5CB) was easily obtained. A sandwich system of aptamer/thrombin/aptamer-functionalized gold nanoparticles (AuNPs) was fabricated, and AuNPs-aptamer conjugation caused the disruption of the 5CB orientation, leading to an obvious change of the optical appearance from a dark to a bright response to thrombin concentrations from 0.1 to 100 nM. This design also allowed quantitative detection of the thrombin concentration. This distinctive and sensitive thrombin LC sensor provides a new principle for building LC-sensing systems.

A novel signal amplification strategy of an electrochemical aptasensor for kanamycin, based on thionine functionalized graphene and hierarchical nanoporous PtCu

An ultrasensitive electrochemical aptasensor for the quantitative detection of kanamycin antibiotic was fabricated based on a novel signal amplification strategy. This aptasensor was developed using thionine functionalized graphene (GR-TH) and hierarchical nanoporous (HNP) PtCu alloy as biosensing substrates for the first time. HNP-PtCu alloy with controllable bimodal ligament/pore distributions was successfully prepared by two-step dealloying of a well-designed PtCuAl precursor alloy combined with an annealing operation. GR-TH composite was synthesized by one-step reduction of graphene oxide (GO) in TH solution. Greatly amplified sensitivity was achieved by using GR-TH/HNP-PtCu composite owing to its large specific surface and good electron-transfer ability. Under the optimized conditions, the proposed aptasensor exhibited a high sensitivity and a wider linearity to kanamycin in the range 5 × 10(-7)-5 × 10(-2) μgmL(-1) with a low detection limit of 0.42 pgmL(-1). This aptasensor also displayed a satisfying electrochemical performance with good stability, selectivity and reproducibility. The as-prepared aptasensor was successfully used for the determination of kanamycin in animal derived food.

Electrochemical thrombin detection based on the direct interaction of target proteins and graphene oxide as an indicator

Target protein-directed adsorption of graphene oxide (GO) as an electroactive indicator was employed for electrochemical detection of thrombin. The method was highly sensitive and the detection limit was as low as 9.7 pg ml(-1).

Cyclodextrin functionalized graphene-gold nanoparticle hybrids with strong supramolecular capability for electrochemical thrombin aptasensor

We demonstrate a facile one-pot synthetic strategy for controlled synthesis of thio-β-cyclodextrin functionalized graphene/gold nanoparticles (SH-β-CD-Gr/AuNPs) composites using SH-β-CD as both the dispersant and linker. The obtained SH-β-CD-Gr/AuNPs integrate the excellent electrical properties and large surface area of graphene and AuNPs with supramolecular recognition ability of CD, which show more effective electron transfer and higher enriched ability for the ferrocene probe via the host-guest interaction between CD and ferrocene than SH-β-CD-Gr. In the presence of target, the stronger interaction between aptamer and target makes the ferrocene move closer to the electrode surface, thus facilitating the electron transfer. Based on this sensing mechanism, a new and highly sensitive biosensing concept by the use of SH-β-CD-Gr/AuNPs as enhancing materials is demonstrated for "signal-on" detection of targets (thrombin as a model target). This biosensor exhibits a wide linear range for thrombin from 1.6×10(-17) M to 8.0×10(-15) M and a very low limit of detection 5.2×10(-18) M, which is two-order magnitude better than those of SH-β-CD-Gr (the detection linear range from 1.6×10(-15) M to 8.0×10(-13) M and detection limit of 1.0×10(-15) M). Our proposed electrochemical aptasensor based on SH-β-CD-Gr/AuNPs shows good selectivity against other proteins such as human serum albumin, lysozyme and insulin. To the best of our knowledge, the present SH-β-CD-Gr/AuNPs hybrids are the most efficient graphene-based electrochemical active probes ever reported for biosensors.

Dendritic Pt@Au nanowires as nanocarriers and signal enhancers for sensitive electrochemical detection of carcinoembryonic antigen

An electrochemical aptasensor for the sensitive and selective determination of carcinoembryonic antigen was constructed based on dendritic Pt@AuNWs as nanocarriers and signal enhancers.

The graphene/nucleic acid nanobiointerface

In this critical review, we present the recent advances in the design and fabrication of graphene/nucleic acid nanobiointerfaces, as well as the fundamental understanding of their interfacial properties and various nanobiotechnological applications.

An amplified electrochemical aptasensor for thrombin detection based on pseudobienzymic Fe3O4-Au nanocomposites and electroactive hemin/G-quadruplex as signal enhancers

A sensitive and selective electrochemical aptasensor for thrombin detection was constructed based on hemin/G-quadruplex as the signal label and Fe3O4-Au nanocomposites with glucose oxidase (GOx-) and peroxide-mimicking enzyme activity as the signal enhancers. Due to their large surface area and good biocompatibility, Fe3O4-Au nanocomposites were employed to immobilize electroactive hemin/G-quadruplex, which was formed by the conjugation between a single-stranded guanine-rich nucleic acid and hemin. Based on the GOx-mimicking enzyme activity, Au nanoparticles on the surface of the Fe3O4-Au nanocomposites effectively catalyzed the oxidization of glucose in the presence of dissolved O2, accompanied by the production of H2O2. Both the Fe3O4 cores of Fe3O4-Au nanocomposites and hemin/G-quadruplex with H2O2-mimicking enzyme activity could catalyze the reduction of the generated H2O2, which promoted the electron transfer of hemin and amplified the electrochemical signal. The proposed electrochemical aptasensor had a wide dynamic linear range of 0.1 pM to 20 nM with a lower detection limit of 0.013 pM, which provided a promising method for a sensitive assay for the detection of proteins in electrochemical aptasensors.

Recent advances in aptasensors based on graphene and graphene-like nanomaterials

Graphene and graphene-like two-dimensional nanomaterials have aroused tremendous research interest in recent years due to their unique electronic, optical, and mechanical properties associated with their planar structure. Aptamers have exhibited many advantages as molecular recognition elements for sensing devices compared to traditional antibodies. The marriage of two-dimensional nanomaterials and aptamers has emerged many ingenious aptasensing strategies for applications in the fields of clinical diagnosis and food safety. This review highlights current advances in the development and application of two-dimensional nanomaterials-based aptasensors with the focus on two main signal-transducing mechanisms, i.e. electrochemical and optical. A special attention is paid to graphene, a one-atom thick layer of graphite with exceptional properties, representing a fastgrowing field of research. In view of the unique properties of two-dimensional nanostructures and their inherent advantages of synthetic aptamers, we expect that high-performance two-dimensional nanomaterials-based aptasensing devices will find extensive applications in environmental monitoring, biomedical diagnostics, and food safety.

Porous platinum nanotubes modified with dendrimers as nanocarriers and electrocatalysts for sensitive electrochemical aptasensors based on enzymatic signal amplification

A highly sensitive electrochemical aptasensor for thrombin detection is developed and demonstrated by using porous platinum nanotubes modified with polyamidoamine dendrimers as nanocarriers and electrocatalysts. The proposed strategy affords a low detection limit of 0.03 pM based on enzyme-based signal amplification.

Multiplexed electrochemical detection of trypsin and chymotrypsin based on distinguishable signal nanoprobes

In this work, we developed a novel multisignal output for simultaneous detection of multiple proteases by using nanoprobes labeled with distinguishable electrochemical probes. First, biotinylated peptide1 (S1) and biotinylated peptide2 (S2) were associated with biotinylated DNA1 and DNA2 via biotin-streptavidin interaction, forming DNA1-S1 and DNA2-S2, respectively. Two distinguishable signal nanoprobes (DNA1'-Au NPs-Thi and DNA2'-Au NPs-Fc) were prepared by initial assembling DNA1' and DNA2' on the Au NPs surface, respectively, and then carrying corresponding thionine (Thi) and 6-(Ferrocenyl)hexanethiol (Fc). Then, the peptide substrates (DNA1-S1 and DNA2-S2) were immobilized on gold electrode surface through Au-S bonds, and the DNA1'-Au NPs-Thi and DNA2'-Au NPs-Fc were assembled to the peptide-DNA-modified electrode surface via DNA hybridization. The targets of trypsin and chymotrypsin can specifically recognize and cleave peptides with different sequences, releasing DNA1'-Au NPs-Thi and DNA2'-Au NPs-Fc from the electrode surface into solution, thus decreasing the current of Thi and Fc. The decrease in the electrochemical currents of the two signal nanoprobes enables us to simultaneously and quantitatively determine the targets trypsin and chymotrypsin. More importantly, this strategy can be extended easily by designing various proteases-specific peptide substrates and utilizing corresponding electrochemical detectable elements for simultaneous multiplex protease assay in various biosystems.

Development of an aptamer-based impedimetric bioassay using microfluidic system and magnetic separation for protein detection

An aptamer-based impedimetric bioassay using the microfluidic system and magnetic separation was developed for the sensitive and rapid detection of protein. The microfluidic impedance device was fabricated through integrating the gold interdigitated array microelectrode into a flow cell made of polydimethylsiloxane (PDMS). Aptamer modified magnetic beads were used to capture and separate the target protein, and concentrated into a suitable volume. Then the complexes were injected into the microfluidic flow cell for impedance measurement. To demonstrate the high performance of this novel detection system, thrombin was employed as the target protein. The results showed that the impedance signals at the frequency of 90 kHz have a good linearity with the concentrations of thrombin in a range from 0.1 nM to 10nM and the detection limit is 0.01 nM. Compared with the reported impedimetric aptasensors for thrombin detection, this method possesses several advantages, such as the increasing sensitivity, improving reproducibility, reducing sample volume and assay time. All these demonstrate the proposed detection system is an alternative way to enable sensitive, rapid and specific detection of protein.

Porous platinum nanotubes labeled with hemin/G-quadruplex based electrochemical aptasensor for sensitive thrombin analysis via the cascade signal amplification

For the first time, a sensitive electrochemical aptasensor for thrombin (TB) was developed by using porous platinum nanotubes (PtNTs) labeled with hemin/G-quadruplex and glucose dehydrogenase (GDH) as labels. Porous PtNTs with large surface area exhibited the peroxidase-like activity. Coupling with GDH and hemin/G-quadruplex as NADH oxidase and HRP-mimicking DNAzyme, the cascade signal amplification was achieved by the following ways: in the presence of glucose and NAD(+) in the working buffer, GDH electrocatalyzed the oxidation of glucose with the production of NADH. Then, hemin/G-quadruplex as NADH oxidase catalyzed the oxidation of NADH to in situ generate H2O2. Based on the corporate electrocatalysis of PtNTs and hemin/G-quadruplex toward H2O2, the electrochemical signal was significantly amplified, allowing the detection limit of TB down to 0.15 pM level. Moreover, the proposed strategy was simple because the intercalated hemin offered the readout signal, avoiding the adding of additional redox mediator as signal donator. Such an electrochemical aptasensor is highly promising for sensitive detection of other proteins in clinical diagnostics.

Label-free aptamer biosensor for thrombin detection on a nanocomposite of graphene and plasma polymerized allylamine

A nanocomposite was fabricated from graphene, self assembled octadecylamine (OTA) and plasma polymerized allylamine (PPAA). A thrombin aptamer was immobilized onto the amino-functionalized nanocomposite.

Signal amplification for thrombin impedimetric aptasensor: sandwich protocol and use of gold-streptavidin nanoparticles

In this work, we report a highly specific amplification strategy demonstrated for the ultrasensitive biosensing of thrombin with the use of gold-streptavidin nanoparticles (strep-AuNPs) and silver reduction enhancement. The biotinylated aptamer of thrombin was immobilized onto an avidin-graphite epoxy composite (AvGEC) electrode surface by affinity interaction between biotin and avidin; electrochemical impedance measurements were performed in a solution containing the redox marker ferrocyanide/ferricyanide. The change in interfacial charge transfer resistance (Rct) experimented by the redox marker, was recorded to confirm aptamer complex formation with target protein, thrombin (Thr), in a label-free first stage. A biotinylated second thrombin aptamer, with complementary recognition properties was then used in a sandwich approach. The addition of strep-AuNPs and silver enhancement treatment led to a further increment of Rct thus obtaining significant signal amplification. The AptThrBio1-Thr-AptThrBio2 sandwich formation was inspected by confocal microcopy after incubation with streptavidin quantum dots. In order to visualize the presence of gold nanoparticles, the same silver enhancement treatment was applied to electrodes already modified with the nanoparticle-sandwich conjugate, allowing direct observation by scanning electron microscopy (SEM). Results showed high sensitivity and selectivity for thrombin detection, with an improvement from ca. 4.7 pM in a simple assay to 0.3 pM in the amplified reported scheme.