Bimetallic MOF synergy molecularly imprinted ratiometric electrochemical sensor based on MXene decorated with polythionine for ultra-sensitive sensing of catechol

Dual-signal ratiometric molecularly imprinted polymer (MIP) electrochemical sensors with bimetallic active sites and high-efficiency catalytic activity were fabricated for the sensing of catechol (CC) with high selectivity and sensitivity. The amino-functionalization bimetallic organic framework materials (Fe@Ti-MOF-NH₂), coupled with two-dimensional layered titanium carbide (MXene) co-modified glassy carbon electrode provides an expanded surface while amplifying the output signal through the electropolymerization immobilization of polythionine (pTHi) and MIP. The oxidation of CC and pTHi were presented as the response signal and the internal reference signal. The oxidation peak current at +0.42 V rose with increased concentration of CC, while the peak currents of pTHi at -0.20 V remained constant. Compared to the common single-signal sensing system, this one (MIP/pTHi/MXene/Fe@Ti-MOF-NH₂/GCE), a novel ratiometric MIP electrochemical sensor exhibited two segments wide dynamic range of 1.0-300 μM (R² = 0.9924) and 300-4000 μM (R² = 0.9912), as well as an ultralow detection limit of 0.54 μM (S/N = 3). Due to the specific recognition function of MIPs and the advantages of built-in correction of pTHi, the prepared surface imprinting sensor presented an excellent performance in selectivity and reproducibility. Besides, this sensor possessed superior anti-interference ability with ions and biomolecules, excellent reproducibility, repeatability, and acceptable stability. Furthermore, the proposed sensing system exhibits high specific recognition in the determination of environmental matrices and biological fluids in real samples with satisfactory results. Therefore, this signal-enhanced ratiometric MIP electrochemical sensing strategy can accurately and selectively analyze and detect other substances.

An efficient differential sensing strategy for phenolic pollutants based on the nanozyme with polyphenol oxidase activity

To realize the efficient differential sensing of phenolic pollutants in sewage, a novel sensing strategy was successfully developed based on one nanozyme (GMP-Cu) with polyphenol oxidase activity. Phenolic pollutants can be oxidized by GMP-Cu, and the oxidation products reacts subsequently with 4-aminoantipyrine to produce a quinone-imine compound. The absorption spectra of final quinone-imine products resulted from different phenolic pollutants showed obvious differences, which were due to the interaction difference between GMP-Cu and phenolic pollutants, as well as the different molecular structures of the quinone-imine products from different phenolic pollutants. Based on the difference of absorption spectra, a novel differential sensing strategy was developed. The genetic algorithm was used to select the characteristic wavelengths at different enzymatic reaction times, HCA and PLS-DA algorithms were utilized for the discriminant sensing of seven representative phenolic pollutants, including hydroquinone, resorcinol, catechol, resorcinol, phenol, p-chlorophenol, and 2,4-dichlorophenol. Scientific wavelength selection algorithm and recognition algorithm resulted in the successful identification of phenolic pollutants in sewage with a discriminant accuracy of 100%, and differentiation of the phenolic pollutants regardless of their concentration. These results indicate that sensing strategy can be used as an effective tool for the efficient identification and differentiation of phenolic pollutants in sewage.

Facile synthesis of nitrogen-doped graphene quantum dots as nanocarbon emitters for sensitive detection of catechol

Development of nanomaterial-based electrochemiluminescence (ECL) emitters is highly desirable for the fabrication and wide applications of ECL sensors. Herein, nitrogen-doped graphene quantum dots (NGQDs) were easily synthesized as nanocarbon emitters with anodic ECL for sensitive ECL determination of catechol (CC). Facile synthesis of NGQDs was easily achieved using molecular fusion of a carbon precursor in a one-step hydrothermal process. The synthesis has advantages of simple and convenient operation and high yield. The as-prepared NGQDs have uniform size, good crystallinity, single-layered graphene structure, and excitation-independent fluorescence. In the presence of hydrogen peroxide (H₂O₂), NGQDs exhibit high anodic ECL owing to the presence of functional hydrazide groups. As CC could significantly reduce the ECL intensity of NGQDs, sensitive determination of CC was realized with a linear range from 100 nM to 10 μM and 10 μM to 60 μM with a low limit of detection (LOD, 42 nM). The determination of CC in environmental water was also achieved with high reliability.

Nitrogen-doped graphene quantum dots are easily synthesized and can be used as nanocarbon emitters for sensitive electrochemiluminescence detection of catechol.

Simultaneous determination of hydroquinone and catechol by a reduced graphene oxide-polydopamine-carboxylated multi-walled carbon nanotube nanocomposite

A reduced graphene oxide–polydopamine–carboxylated multi-walled carbon nanotube (RGO–PDA–cMWCNT) nanocomposite was fabricated via a facile, one-pot procedure and was characterized by a variety of techniques. A novel electrochemical sensor based on RGO–PDA–cMWCNT was constructed to determine hydroquinone (HQ) and catechol (CT) simultaneously. This newly prepared nanocomposite shows excellent electrocatalytic efficacy in the electrode reaction of the two isomers. Specifically, the peak-to-peak potential difference between the two dihydroxybenzenes is 115 mV for oxidation, which is obviously larger than similar electrochemical sensors. The established method displays a wide linear range from 0.5 to 5000 μM with a detection limit (S/N = 3) of 0.066 μM for HQ and 0.073 μM for CT. In addition, this electrochemical approach has been tested to measure the two dihydroxybenzenes in real samples and satisfactory results were recorded.

A novel reduced graphene oxide–polydopamine–carboxylated multi-walled carbon nanotube nanocomposite (RGO–PDA–cMWCNT) was fabricated for the sensitive and simultaneous determination of hydroquinone (HQ) and catechol (CT).

Recent Advances in Electrochemiluminescence and Chemiluminescence of Metal Nanoclusters

Metal nanoclusters (NCs), including Au, Ag, Cu, Pt, Ni and alloy NCs, have become more and more popular sensor probes with good solubility, biocompatibility, size-dependent luminescence and catalysis. The development of electrochemiluminescent (ECL) and chemiluminescent (CL) analytical methods based on various metal NCs have become research hotspots. To improve ECL and CL performances, many strategies are proposed, from metal core to ligand, from intermolecular electron transfer to intramolecular electron transfer. Combined with a variety of amplification technology, i.e., nanostructure-based enhancement and biological signal amplification, highly sensitive ECL and CL analytical methods are developed. We have summarized the research progresses since 2016. Also, we discuss the current challenges and perspectives on the development of this area.

Sensitive Detection of Caffeic Acid and Rutin via the Enhanced Anodic Electrochemiluminescence Signal of Luminol

The electrooxidation of phenolic groups of caffeic acid and rutin promote anodic electrochemiluminescence (ECL) luminol substantially. A sensitive, and cost-effective ECL method has thus been developed to detect caffeic acid, ranging from 0.1 to 5.0 μM, with a detection limit of 0.1 μM and rutin ranging from 0.2 to 25 μM with a detection limit of 0.12 μM. Contrarily, phenolic compounds quench the weak cathodic ECL of luminol. Both of anodic and cathodic ECL mechanisms of luminol in the presence of phenolic compounds are analyzed. The method based on the boomed anodic ECL of luminol is comparable to those based on Ru(bpy)₃²⁺ and S₂O₈^2-/O₂ systems. A lower onset potential and price than the other ECL reagents would realize its widely applications in the detection of phenolic compounds in food and medicine.

Mechanistic insights into the photocatalytic properties of metal nanocluster/graphene ensembles. Examining the role of visible light in the reduction of 4-nitrophenol

Metal nanoclusters (M_NCs) based on silver and gold, abbreviated as Ag_NCs and Au_NCs, respectively, were synthesized and combined with functionalized graphene, abbreviated as f-G, forming novel M_NC/f-G ensembles. The preparation of M_NCs/f-G was achieved by employing attractive electrostatic interactions developed between negatively charged M_NCs, attributed to the presence of carboxylates due to α-lipoic acid employed as a stabilizer, and positively charged f-G, attributed to the presence of ammonium units as addends. The realization of M_NC/f-G ensembles was established via titration assays as evidenced by electronic absorption and photoluminescence spectroscopy as well as scanning transmission electron microscopy (STEM) and energy-dispersive X-ray (EDX) spectroscopy analyses. Photoinduced charge-transfer phenomena were inferred within M_NCs/f-G, attributed to the suppression of M_NC photoluminescence by the presence of f-G. Next, the M_NC/f-G ensembles were successfully employed as proficient catalysts for the model reduction of 4-nitrophenol to the corresponding 4-aminophenol as proof for the photoinduced hydrogen production. Particularly, the reduction kinetics decelerated by half when bare M_NCs were employed vs. the M_NC/f-G ensembles, highlighting the beneficial role of M_NCs/f-G in catalysing the process. Furthermore, Au_NCs/f-G displayed exceptionally higher catalytic activity both in the dark and under visible light illumination conditions, which is ascribed to three synergistic mechanisms, namely, (a) hydride transfer from Au-H, (b) hydride transfer from photogenerated Au-H species, and (c) hydrogen produced by the photoreduction of water. Finally, recycling and re-employing M_NCs/f-G in successive catalytic cycles without loss of activity toward the reduction of 4-nitrophenol was achieved, thereby highlighting their wider applicability.

Valence States Effect on Electrogenerated Chemiluminescence of Gold Nanocluster

This work elucidated the valence states effect on the electrogenerated chemiluminescence (ECL) performance of gold nanocluster (AuNC). The N-acetyl-l-cysteine-AuNCs (NAC-AuNCs) and the electrochemical reduction method for reducing the AuNCs were first employed to this study. Results demonstrate that the electrochemical reduction degree of the AuNCs depended on the reduction potential, and the enhancement of the ECL signals was positively correlated with the reduction degree of AuNCs, which indicated that the valence state of Au plays a vital role in the ECL performance of AuNCs. Furthermore, the proposed method has been successfully extended to the chemical reduction technique and other nanoclusters. Therefore, an excellent AuNC-based ECL method with various advantages, such as simple preparation, lower toxicity, high sensitivity, and Φ_ECL, and excellent stability, has been proposed. This approach not only opens up a new avenue for designing and developing ECL device from other functional-metal based NCs, but also extends the huge potential application in the ECL sensing.

A novel Laccase Biosensor based on Laccase immobilized Graphene-Cellulose Microfiber Composite modified Screen-Printed Carbon Electrode for Sensitive Determination of Catechol

In the present work, we demonstrate the fabrication of laccase biosensor to detect the catechol (CC) using laccase immobilized on graphene-cellulose microfibers (GR-CMF) composite modified screen printed carbon electrode (SPCE). The direct electrochemical behavior of laccase was investigated using laccase immobilized different modified SPCEs, such as GR/SPCE, CMF/SPCE and GR-CMF/SPCE. Compared with laccase immobilized GR and CMF modified SPCEs, a well-defined redox couple of Cu^I/Cu^II for laccase was observed at laccase immobilized GR-CMF composite modified SPCE. Cyclic voltammetry results show that the as-prepared biosensor has 7 folds higher catalytic activity with lower oxidation potential towards CC than SPCE modified with GR-CMF composite. Under optimized conditions, amperometric i-t method was used for the quantification of CC, and the amperometric response of the biosensor was linear over the concertation of CC ranging from 0.2 to 209.7 μM. The sensitivity, response time and the detection limit of the biosensor for CC is 0.932 μMμA⁻¹ cm⁻², 2 s and 0.085 μM, respectively. The biosensor has high selectivity towards CC in the presence of potentially active biomolecules and phenolic compounds. The biosensor also accessed for the detection of CC in different water samples and shows good practicality with an appropriate repea.

Optimising electrogenerated chemiluminescence of quantum dots via co-reactant selection

We demonstrate that for quantum dot (QD) based electrochemiluminescence (ECL), the commonly used co-reactant does not perform as effectively as potassium persulfate. By exploiting this small change in co-reactant, ECL intensity can be enhanced dramatically in a cathodic-based ECL system. However, TPA remains the preferential co-reactant-based system for anodic ECL. This phenomenon can be rationalised through the relative energy-level profiles of the QD to the co-reactant in conjunction with the applied potential range. This work highlights the importance of understanding the co-reactant pathway for optimising the application of ECL to bioanalytical analysis, in particular for near-infrared (NIR) QDs which can be utilised for analysis in blood.

Graphical Abstract

A highly sensitive glutamic acid biosensor based on the determination of NADH enzymically generated by l-glutamic dehydrogenase

In this article, a sensitive and stereo-selective biosensor for l-glutamic acid (l-Glu) based on the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ has been designed by applying l-glutamic dehydrogenase (GLDH) for enzymatic generation of NADH in situ.

Microwave-assisted synthesis of carbon dots–zinc oxide/multi-walled carbon nanotubes and their application in electrochemical sensors for the simultaneous determination of hydroquinone and catechol

Cyclic voltammetry of HQ and CC recorded on Nafion/CDs–ZnO/MWCNTs/GCE.

Rare Elements Electrochemistry: The Development of a Novel Electrochemical Sensor for the Rapid Detection of Europium in Environmental Samples Using Gold Electrode Modified with 2-pyridinol-1-oxide

This work presents for the first time the electrochemical determination of europium using cyclic voltammetry at gold electrodes modified with 2-pyridinol-1-oxide. A well-defined oxidation peak was observed in cyclic voltammetry as a result of the oxidation of the europium at ∼1100 mV in phosphate buffer at pH 7.0. The peak current increased linearly with the increase of concentration of the europium over the range from 1 to 80 μM and detection limit (based on 3-sigma) and quantification were found to be 0.3 and 0.549 μM, respectively. The analytical utility of the developed protocol was evaluated by performing the detection of the europium in river water. Europium is also linear over the concentration range 10 to 150 μM. (I(p)/μA = 0.7239x + 108.19, R(2) = 0.9981 and n = 9) with a detection limit of 6.5 μM (based on 3-sigma). This simple and effective protocol exhibited good sensitivity, precision and reliability towards the detected analyte.

Graphene hybrids: synthesis strategies and applications in sensors and sensitized solar cells

Graphene exhibits unique 2-D structural, chemical, and electronic properties that lead to its many potential applications. In order to expand the scope of its usage, graphene hybrids which combine the synergetic properties of graphene along with metals/metal oxides and other nanostructured materials have been synthesized and are a widely emerging field of research. This review presents an overview of the recent progress made in the field of graphene hybrid architectures with a focus on the synthesis of graphene-carbon nanotube (G-CNT), graphene-semiconductor nanomaterial (G-SNM), and graphene-metal nanomaterial (G-MNM) hybrids. It attempts to identify the bottlenecks involved and outlines future directions for development and comprehensively summarizes their applications in the field of sensing and sensitized solar cells.

A signal-on electrochemiluminescence biosensor for detecting Con A using phenoxy dextran-graphite-like carbon nitride as signal probe

A novel signal-on electrochemiluminescence (ECL) biosensor for detecting concanavalin A (Con A) was fabricated with phenoxy dextran-graphite-like carbon nitride (DexP-g-C3N4) as signal probe. In this construction strategy, the nanocomposites of three-dimensional graphene and gold nanoparticles (3D-GR-AuNPs) were used as matrix for high loading of glucose oxidase (GOx), which served as recognition element for bounding Con A. Con A further interacted with DexP-g-C3N4 through a specific carbohydrate-Con A interaction to achieve a sandwiched scheme. With the increase of Con A incubated onto the electrode, the ECL signal resulted from DexP-g-C3N4 would enhance, thus achieving a signal-on ECL biosensor for Con A detection. Due to the integration of the virtues of 3D-GR-AuNPs and the excellent ECL performance of DexP-g-C3N4, the prepared biosensor exhibits a wide linear response range from 0.05 ng/mL to 100 ng/mL and a low detection limit of 17 pg/mL (S/N=3).

Enhanced sensing performance of supported graphitic carbon nitride nanosheets and the fabrication of electrochemiluminescent biosensors for IgG

A greatly enhanced ECL signal was obtained after the incorporation of C₃N₄ nanosheets into the NPG matrix and a label-free ECL immunosensor was proposed.

Nanomaterials-based electrochemical detection of chemical contaminants

Recent advances in the development of nanomaterials-based electrochemical sensors for environmental monitoring and food safety applications are assessed.