Bimetallic MOF synergy molecularly imprinted ratiometric electrochemical sensor based on MXene decorated with polythionine for ultra-sensitive sensing of catechol

Dual-signal ratiometric molecularly imprinted polymer (MIP) electrochemical sensors with bimetallic active sites and high-efficiency catalytic activity were fabricated for the sensing of catechol (CC) with high selectivity and sensitivity. The amino-functionalization bimetallic organic framework materials (Fe@Ti-MOF-NH₂), coupled with two-dimensional layered titanium carbide (MXene) co-modified glassy carbon electrode provides an expanded surface while amplifying the output signal through the electropolymerization immobilization of polythionine (pTHi) and MIP. The oxidation of CC and pTHi were presented as the response signal and the internal reference signal. The oxidation peak current at +0.42 V rose with increased concentration of CC, while the peak currents of pTHi at -0.20 V remained constant. Compared to the common single-signal sensing system, this one (MIP/pTHi/MXene/Fe@Ti-MOF-NH₂/GCE), a novel ratiometric MIP electrochemical sensor exhibited two segments wide dynamic range of 1.0-300 μM (R² = 0.9924) and 300-4000 μM (R² = 0.9912), as well as an ultralow detection limit of 0.54 μM (S/N = 3). Due to the specific recognition function of MIPs and the advantages of built-in correction of pTHi, the prepared surface imprinting sensor presented an excellent performance in selectivity and reproducibility. Besides, this sensor possessed superior anti-interference ability with ions and biomolecules, excellent reproducibility, repeatability, and acceptable stability. Furthermore, the proposed sensing system exhibits high specific recognition in the determination of environmental matrices and biological fluids in real samples with satisfactory results. Therefore, this signal-enhanced ratiometric MIP electrochemical sensing strategy can accurately and selectively analyze and detect other substances.

Supramolecular confinement pyrolysis to carbon-supported Mo nanostructures spanning four scales for hydroquinone determination

Metal nanostructures with high atom utilization, abundant active sites, and special electron structures should be beneficial to the electrochemical monitoring of hydroquinone (HQ), a highly toxic environmental pollutant. However, traditional nanostructures, especially non-noble metals generally suffer from severe aggregation, or consist of a mixture of nanoparticles and nanoclusters, resulting in low detection sensitivity. Herein, we precisely control the size of Mo-based nanostructures spanning four scales (viz. Mo₂C nanoparticles, Mo₂C nanodots, Mo nanoclusters and Mo single atoms) anchored on N, P, O co-doped carbon support. The detection sensitivity of four samples toward the HQ follows the orders of Mo single atoms＞Mo₂C nanodots＞Mo nanoclusters＞Mo₂C nanoparticles. The catalytic ability of four catalysts is investigated, also showing the same order. The supported Mo single atoms show superior electro-sensing performance for HQ with wide linear range (0.02-200 μM) and low detection limit (0.005 μM), surpassing most previously reported catalysts. Moreover, the coexistence of dihydroxybenzene isomers of catechol (CC) and resorcinol (RC) does not interfere with the detection of HQ on the Mo single-atom sensor. This work opens up a polyoxometalate-based confinement pyrolysis approach to constructing ultrafine metal-based nanostructures spanning multiple-scales for efficient electrochemical applications.

Electrochemical Detection of Dihydroxybenzene Isomers at a Pencil Graphite Based Electrode

In this work, an HB pencil electrode (HBPE) was electrochemically modified by amino acids (AAs) glycine (GLY) and aspartic acid (ASA) and designated as GLY-HB and ASA-HB electrodes. They were used in the detection of dihydroxybenzene isomers (DHBIs) such as hydroquinone (HQ), catechol (CC), and resorcinol (RS), by cyclic voltammetry (CV), and by differential pulse voltammetry. HBPE was characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. These three electrodes showed a linear relationship of current with concentration of DHBIs, and the electrochemical processes were diffusion controlled in all cases. In simultaneous detection, the limit of detection, based on signal-to-noise ratio (S/N = 3), for HQ, CC, and RS was 12.473, 16.132, and 25.25 μM, respectively, at bare HBPE; 5.498, 7.119, and 14.794 μM, respectively, at GLY-HB; and 22.459, 25.478, and 38.303 μM, respectively, at ASA-HB. The sensitivity for HQ, CC, and RS was 470.481, 363.781, and 232.416 μA/mM/cm², respectively, at bare HBPE; 364.785, 282.712, and 135.560 μA/mM/cm², respectively, at GLY-HB; and 374.483, 330.108, and 219.574, respectively, at ASA-HB. The interference studies clarified the suitability and reliability of the electrodes for the detection of HQ, CC, and RS in an environmental system. Real sample analysis was done using tap water, and the proposed electrodes expressed recovery with high reproducibility. Meanwhile, these three electrodes have excellent sensitivity and selectivity, which can be used as a promising technique for the detection of DHBIs simultaneously.

Phenolic water toxins: redox mechanism and method of their detection in water and wastewater

Phenolic pollutants are highly toxic and persistent in the environment. Their efficient detection is a pressing social demand. In this regard we introduce a novel ultrasensitive electroanalytical platform for the individual and synchronized detection of three phenolic isomers commonly known as hydroquinone (HQ), resorcinol (RC), and catechol (CC). The sensing device consists of a glassy carbon electrode (GCE) modified with functionalized carbon nanotubes (fCNTs) and gold-silver (Au-Ag NPs) bimetallic nanoparticles. The sandwiched scaffold represented as fCNTs/Au-Ag NPs/fCNTs/GCE efficiently senses HQ, RC, and CC with detection limits of 28.6 fM, 36.5 fM and 42.8 fM respectively. The designed sensor is more promising than reported sensors for phenolic toxins in the context of high sensitivity, selectivity, and rapid responsiveness. The designed sensor also shows the qualities of stability, reproducibility, reliability, and selective recognition capacity for target analytes in multiple real water samples. Moreover, computational calculations explain the function of the electrode modifier in facilitating charge transfer between the transducer and analytes.

Status Update on Bioelectrochemical Systems: Prospects for Carbon Electrode Design and Scale-Up

Bioelectrochemical systems (BES) employ enzymes, subcellular structures or whole electroactive microorganisms as biocatalysts for energy conversion purposes, such as the electrosynthesis of value-added chemicals and power generation in biofuel cells. From a bioelectrode engineering viewpoint, customizable nanostructured carbonaceous matrices have recently received considerable scientific attention as promising electrode supports due to their unique properties attractive to bioelectronics devices. This review demonstrates the latest advances in the application of nano- and micro-structured carbon electrode assemblies in BES. Specifically, in view of the gradual increase in the commercial applicability of these systems, we aim to address the stability and scalability of different BES designs and to highlight their potential roles in a circular bioeconomy.

A three-electrode integrated electrochemical platform based on nanoporous gold for the simultaneous determination of hydroquinone and catechol with high selectivity

A novel integrated electrochemical platform was built for the simultaneous determination of hydroquinone and catechol.

Polyphenol oxidase-based electrochemical biosensors: A review

The detection of phenolic compounds is relevant not only for their possible benefits to human health but also for their role as chemical pollutants, including as endocrine disruptors. The required monitoring of such compounds on-site or in field analysis can be performed with electrochemical biosensors made with polyphenol oxidases (PPO). In this review, we describe biosensors containing the oxidases tyrosinase and laccase, in addition to crude extracts and tissues from plants as enzyme sources. From the survey in the literature, we found that significant advances to obtain sensitive, robust biosensors arise from the synergy reached with a diversity of nanomaterials employed in the matrix. These nanomaterials are mostly metallic nanoparticles and carbon nanostructures, which offer a suitable environment to preserve the activity of the enzymes and enhance electron transport. Besides presenting a summary of contributions to electrochemical biosensors containing PPOs in the last five years, we discuss the trends and challenges to take these biosensors to the market, especially for biomedical applications.

Strain engineered biocompatible h-WO3 nanofibers based highly selective and sensitive chemiresistive platform for detection of Catechol in blood sample

In this work, we demonstrate a simple, low-cost biocompatible 1D-WO₃ electrospun nanofibers based strain-induced high-performance chemiresistive catechol sensor. WO₃ nanofibers were synthesized using e-spinning, annealed and drop-casted on to flexible PET substrate. X-Ray Diffraction (XRD) studies confirm the formation of Hexagonal phase-WO₃ and Raman spectroscopy proved the presence of O-W-O bending modes. Field emission scanning electron microscopy (FESEM) images displayed the random orientation of dense WO₃ nanofibers on PET substrate. Hall measurements confirmed the formation of n-type WO₃ nanofibers with carrier density of 10¹⁹ cm^-3. The sensor responded to a broad dynamic range of catechol concentrations from 1 μM to 100 μM with sensitivity of 51.29 μM^-1 cm^-2 and limit of detection of 0.52 μM which are better than previously reported catechol sensors. Interestingly, upon application of compressive strain to the flexible sensor, a remarkable increase in sensitivity to 88.34 μM^-1 cm^-2 was observed with further reduction of the limit of detection to 42 nM. Upon subjecting the sensor to strain ranging from 3.14% to 47.6%, an increase in sensitivity to catechol was observed due to the increase in the exposed surface area of interconnected WO₃ nanofibers which enhances the active sites for catechol oxidation by enhancing the tunneling current. The sensor could detect catechol in simulated blood samples with excellent selectivity against AA, UA, Na⁺, Ca⁺, hydroquinone and glucose.

Voltammetric Biosensor Based on Nitrogen-doped Ordered Mesoporous Carbon for Detection of Organophosphorus Pesticides in Vegetables

Background:

Pesticides residues in agricultural products have posed a serious threat to food safety and human health, so it is necessary to develop a rapid and accurate method to detect pesticide in the environment. N-OMC with excellent electroconductivity, high biocompatibility and the functional amino group that can be covalently attached to the enzyme can be applied to construct a sensitive and stable acetylcholinesterase biosensor for rapid and accurate detection of organophosphorus pesticides with the help of L-cysteine self-assembled monolayer and AuNPs.

Methods:

Transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption measurements are used to characterize materials. Electrochemical impedance spectroscopy and cyclic voltammetry are used to study the surface features of modified electrodes. Differential pulse voltammetric is used to measure the peak current of modified electrodes. GC-MS is applied to verify the reliability of the prepared biosensor for organophosphorus pesticides detection.

Results:

N-OMC was synthesized and applied to constructed stable and sensitive acetylcholinesterase biosensors. The combination of N-OMC, L-cysteine self-assembled monolayer and AuNPs to modify the electrode surface has greatly improved the conductivity of biosensor and provided a stable platform for acetylcholinesterase immobilization. The linear detection range of paraoxon was from 3 to 24 nM with a lower detection limit of 0.02 nM.

Conclusion:

The biosensor exhibited satisfactory reproducibility, repeatability and stability, and was successfully employed to determine the paraoxon in vegetables as well as tap water samples, providing a promising tool for rapid and sensitive detection of organophosphorus pesticides in agricultural products.

Gold Nanorod-Based Chrono-Colorimetric Sensor Arrays: A Promising Platform for Chemical Discrimination Applications

Most array-based sensing platforms, to date, utilize static response patterns for discrimination of a wide variety of analytes, but only a few studies have focused on the important task of quantitatively resolving structural isomers, which are nowadays important because of their broad usage in medicines and industries. A possible way of accomplishing this feat is to combine kinetic (rather than static) sensor response profiles with the chemical tongue strategy to allow the development of array-based sensors for isomeric discrimination. Here, by adding the time dimension, a simple and novel gold nanorod (AuNR)-based chrono-colorimetric sensor array is proposed for chemical discrimination applications. Because of their similar structure but different redox potentials, dihydroxybenzene (DHB) structural isomers have been chosen, as models, to evaluate the applicability of the proposed array. The principle of the array relies on various growth rates of silver shells on AuNRs at different silver ion/AuNR concentration ratios owing to the different kinetic behaviors of DHBs, which can be used as fingerprints to identify DHBs with the help of multivariate analysis methods. The combinatorial colorimetric response of AuNRs upon DHB addition has been analyzed by linear discriminant analysis and hierarchical cluster analysis. Finally, identification of individual DHBs or their mixtures in real samples confirms the potential application of the proposed array.

Highly sensitive sensing of hydroquinone and catechol based on β-cyclodextrin-modified carbon dots

In the proposed study, an efficient method for a carbon dot@β-cyclodextrin (C-dot@β-CD)-based fluorescent probe was developed for the analyses of catechol (CC) and hydroquinone (HQ) at trace levels in water samples. The properties of C-dot@β-CD nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The sensing behaviors of C-dot@β-CD toward CC and HQ were investigated by fluorescence spectroscopy. Based on the host–guest chemistry between C-dot@β-CD and phenolic compounds, which can quench C-dot@β-CD fluorescence, the prepared C-dot@β-CD nanocomposites could be used for the sensitive and selective detection of CC or HQ across a wide linear range (0.1 to 10 μM) with detection limits of 47.9 and 20.2 nM, respectively. These results showed that the synthesized C-dot@β-CD nanocomposite exhibited strong fluorescence and high degree of water solubility and thus, it is suitable for use as a nanoprobe for detecting CC or HQ in real water samples.

In the proposed study, an efficient method for a carbon dot@β-cyclodextrin (C-dot@β-CD)-based fluorescent probe was developed for the analyses of catechol (CC) and hydroquinone (HQ) at trace levels in water samples.

Recent Trends on Electrochemical Sensors Based on Ordered Mesoporous Carbon

The past decade has seen an increasing number of extensive studies devoted to the exploitation of ordered mesoporous carbon (OMC) materials in electrochemistry, notably in the fields of energy and sensing. The present review summarizes the recent achievements made in field of electroanalysis using electrodes modified with such nanomaterials. On the basis of comprehensive tables, the interest in OMC for designing electrochemical sensors is illustrated through the various applications developed to date. They include voltammetric detection after preconcentration, electrocatalysis (intrinsically due to OMC or based on suitable catalysts deposited onto OMC), electrochemical biosensors, as well as electrochemiluminescence and potentiometric sensors.

Insight into highly efficient co-removal of p-nitrophenol and lead by nitrogen-functionalized magnetic ordered mesoporous carbon: Performance and modelling

Highly efficient simultaneous removal of Pb(II) and p-nitrophenol (PNP) contamination from water was accomplished by nitrogen-functionalized magnetic ordered mesoporous carbon (N-Fe/OMC). The mutual effects and inner mechanisms of their adsorption onto N-Fe/OMC were systematically investigated by sole and binary systems, and thermodynamic, sorption isotherm and adsorption kinetics models. The liquid-film diffusion step might be the rate-limiting step for PNP and Pb(II). The fitting of experimental data with Temkin model indicates that the adsorption process of PNP and Pb(II) involve physisorption and chemisorption. There exist site competition and enhancement of PNP and Pb(II) on the sorption to N-Fe/OMC. Moreover, N-Fe/OMC could be regenerated effectively and recycled by using dilute NaOH and acetone. These demonstrated superior properties of N-Fe/OMC indicate that it could be applied to treatment of wastewaters containing both lead and PNP.

Simultaneous removal of atrazine and copper using polyacrylic acid-functionalized magnetic ordered mesoporous carbon from water: adsorption mechanism

Highly efficient simultaneous removal of atrazine and Cu(II) was accomplished using synthesized polyacrylic acid-functionalized magnetic ordered mesoporous carbon (P-MMC) as compared to magnetic ordered mesoporous carbon (MMC) and ordered mesoporous carbon (OMC). The mutual effects and interactive mechanism of their adsorption onto P-MMC were investigated systematically by binary, preloading and thermodynamic adsorption procedures. In both binary and preloading systems, the adsorption of atrazine was inhibited to some extent by the presence of Cu(II) because of selective recognition and direct competition, but the presence of atrazine had negligible effect on Cu(II) desorption. With the coexistence of humic acid (0–20 mg L⁻¹), both atrazine and Cu(II) sorption increased slightly in sole and binary systems. With the concentration of coexisting NaCl increasing from 0 to 100 mM, the adsorption capacity for Cu(II) slightly decreased, but as for atrazine adsorption, it decreased at first, and then increased slightly in sole and binary systems. P-MMC was applied to treat real environmental samples, and the sorption capacities for atrazine and Cu(II) in real samples were all more than 91.47% and 96.43% of those in lab ultrapure water, respectively. Finally, comprehensively considering the relatively good renewability and the superior behavior in the application to real water samples, P-MMC has potential in removal of atrazine, Cu(II) and possibly other persistent organic pollutants from wastewater.

A Bioluminogenic Probe for Monitoring Tyrosinase Activity

A bioluminogenic probe based on luciferin was designed and synthesized to monitor tyrosinase activity. This probe was efficient in assessing tyrosinase activity in a buffered aqueous solution and in measuring endogenous tyrosinase activity in melanoma cells.

Development and Characterization of Carbon Based Electrodes from Pyrolyzed Paper for Biosensing Applications

This article details the study of electrochemical behavior of new carbon electrodes based on pyrolysis of different paper sources to be used in biosensor applications. The resistivity of the pyrolyzed papers was initially used as screening parameters to select the best three paper samples (imaging card paper, multipurpose printing paper, and 3MM chromatography paper) and assemble working electrodes that were further characterized by a combination of microscopy, electrochemistry, and spectroscopy. Although slight differences in performance were observed, all carbon substrates fabricated from pyrolysis of paper allowed the development of competitive biosensors for uric acid. The presented results demonstrate the potential of these electrodes for sensing applications and highlight the potential advantages of 3MM chromatography paper as a substrate to fabricate electrodes by pyrolysis.

Determination of Cd2+ and Pb2+ Based on Mesoporous Carbon Nitride/Self-Doped Polyaniline Nanofibers and Square Wave Anodic Stripping Voltammetry

The fabrication and evaluation of a glassy carbon electrode (GCE) modified with self-doped polyaniline nanofibers (SPAN)/mesoporous carbon nitride (MCN) and bismuth for simultaneous determination of trace Cd²⁺ and Pb²⁺ by square wave anodic stripping voltammetry (SWASV) are presented here. The morphology properties of SPAN and MCN were characterized by transmission electron microscopy (TEM), and the electrochemical properties of the fabricated electrode were characterized by cyclic voltammetry (CV). Experimental parameters, such as deposition time, pulse potential, step potential, bismuth concentration and NaCl concentration, were optimized. Under the optimum conditions, the fabricated electrode exhibited linear calibration curves ranging from 5 to 80 nM for Cd²⁺ and Pb²⁺. The limits of detection (LOD) were 0.7 nM for Cd²⁺ and 0.2 nM for Pb²⁺ (S/N = 3). Additionally, the repeatability, reproducibility, anti-interference ability and application were also investigated, and the proposed electrode exhibited excellent performance. The proposed method could be extended for other heavy metal determination.

Removal of bisphenol A by iron nanoparticle-doped magnetic ordered mesoporous carbon

Iron nanoparticle-doped magnetic ordered mesoporous carbon (Fe/OMC) was prepared by co-impregnation and carbothermal reduction methods, and used for highly effective adsorption and degradation of bisphenol A (BPA).

An electrochemically aminated glassy carbon electrode for simultaneous determination of hydroquinone and catechol

A simple strategy based on the easy modification of GCE by pre-electrolyzing it in ammonium carbamate aqueous solution was employed for the simultaneous determination of HQ and CC.

Zinc oxide thin film based nonenzymatic electrochemical sensor for the detection of trace level catechol

In the present work, a novel zinc oxide thin film based nonenzymatic, electrochemical sensor is developed for the detection of catechol.

Facile one-pot synthesis and application of nitrogen and sulfur-doped activated graphene in simultaneous electrochemical determination of hydroquinone and catechol

A high sensitivity sensor for detection of hydroquinone and catechol was constructed based on nitrogen and sulfur co-doped activated graphene.

Phosphorus-doped ordered mesoporous carbons embedded with Pd/Fe bimetal nanoparticles for the dechlorination of 2,4-dichlorophenol

Pd–Fe bimetal nanoparticles embedded within phosphorus-doped ordered mesoporous carbons as highly active and stable catalysts for the degradation of 2,4-dichlorophenol.

Sensitive impedimetric biosensor based on duplex-like DNA scaffolds and ordered mesoporous carbon nitride for silver(I) ion detection

This study demonstrates a new, unlabeled immobilized DNA-based biosensor with ordered mesoporous carbon nitride material (MCN) for the detection of Ag(+) by electrochemical impedance spectroscopy (EIS) with [Fe(CN)6](4-/3-) as the redox couple. The unlabeled immobilized DNA initially formed the hairpin-like structure through hybridization with the probe, and then changed to duplex-like structure upon interaction with Ag(+) in solution to form a C-Ag(+)-C complex at electrode surface. As a result, the interfacial charge-transfer resistance of the electrode towards the [Fe(CN)6](4-/3-) redox couple was changed. Thus, a declined charge transfer resistance (Rct) was obtained, corresponding to Ag(+) concentration. MCN provide an excellent platform for DNA immobilization and faster electron transfer. Impedance data were analyzed with the help of Randles equivalent circuit. The lower detection limit of the biosensor for Ag(+) is 5 × 10(-11) M with good specificity. All results showed that this novel approach provides a reliable method for Ag(+) detection with sensitivity and specificity, potentially useful for practical applications. Moreover, other DNA detection methods for more heavy metals may be obtained from this idea and applied in the environmental field.

A novel biosensor for silver(i) ion detection based on nanoporous gold and duplex-like DNA scaffolds with anionic intercalator

A novel biosensor for silver(i) ion detection based on nanoporous gold and duplex-like DNA scaffolds with anionic intercalator.

Simultaneous electrochemical detection of catechol and hydroquinone based on gold nanoparticles@carbon nanocages modified electrode

Illustration of the synthesis of AuNPs@CNCs and the electrochemical oxidization of CC and HQ.