Di-, tetra-, and perhydropyrrolo[1,2-a]imidazoles: The Methods of Synthesis and Some Aspects of Application

The review summarizes and systematizes the literature data on the synthesis and some aspects of application of pyrrolo[1,2-a]imidazoles. Synthetic approaches are grouped according to the degree of saturation of the product pyrroloimidazole ring. The bibliography of the review includes 110 sources over the last 15 years.

Flexible Chemiresistive Cyclohexanone Sensors Based on Single-Walled Carbon Nanotube-Polymer Composites

We report a chemiresistive cyclohexanone sensor on a flexible substrate based on single-walled carbon nanotubes (SWCNTs) functionalized with thiourea (TU) derivatives. A wrapper polymer containing both 4-vinylpyridine (4VP) groups and azide groups (P(4VP-VBAz)) was employed to obtain a homogeneous SWCNT dispersion via noncovalent functionalization of SWCNTs. The P(4VP-VBAz)-SWCNT composite dispersion was then spray-coated onto an organosilanized flexible poly(ethylene terephthalate) (PET) film to achieve immobilizing quaternization between the pyridyl groups from the polymer and the functional PET substrate, thereby surface anchoring SWCNTs. Subsequent surface functionalization was performed to incorporate a TU selector into the composites, resulting in P(Q4VP-VBTU)-SWCNT, for the detection of cyclohexanone via hydrogen bonding interactions. An increase in conductance was observed as a result of the hydrogen-bonded complex with cyclohexanone resulting in a higher hole density and/or mobility in SWCNTs. As a result, a sensor device fabricated with P(Q4VP-VBTU)-SWCNT composites exhibited chemiresistive responses (ΔG/G₀) of 7.9 ± 0.6% in N₂ (RH 0.1%) and 4.7 ± 0.4% in air (RH 5%), respectively, upon exposure to 200 ppm cyclohexanone. Selective cyclohexanone detection was achieved with minor responses (ΔG/G₀ < 1.4% at 500 ppm) toward interfering volatile organic compounds (VOC). analytes. We demonstrate a robust sensing platform using the polymer-SWCNT composites on a flexible PET substrate for potential application in wearable sensors.

Coating-Based Quartz Crystal Microbalance Detection Methods of Environmentally Relevant Volatile Organic Compounds

Volatile organic compounds (VOCs) that evaporate under standard atmospheric conditions are of growing concern. This is because it is well established that VOCs represent major contamination risks since release of these compounds into the atmosphere can contribute to global warming, and thus, can also be detrimental to the overall health of worldwide populations including plants, animals, and humans. Consequently, the detection, discrimination, and quantification of VOCs have become highly relevant areas of research over the past few decades. One method that has been and continues to be creatively developed for analyses of VOCs is the Quartz Crystal Microbalance (QCM). In this review, we summarize and analyze applications of QCM devices for the development of sensor arrays aimed at the detection of environmentally relevant VOCs. Herein, we also summarize applications of a variety of coatings, e.g., polymers, macrocycles, and ionic liquids that have been used and reported in the literature for surface modification in order to enhance sensing and selective detection of VOCs using quartz crystal resonators (QCRs) and thus QCM. In this review, we also summarize novel electronic systems that have been developed for improved QCM measurements.

Quartz Crystal Microbalance Based Sensor Arrays for Detection and Discrimination of VOCs Using Phosphonium Ionic Liquid Composites

Herein, we examine two sensing schemes for detection and discrimination of chlorinated volatile organic compounds (VOCs). In this work, phosphonium ionic liquids (ILs) were synthesized and vapor sensing properties examined and compared to phosphonium IL-polymer composites. Pure IL sensors were used to develop a QCM-based multisensory array (MSA), while IL-polymer composites were used to develop an MSA and virtual sensor arrays (VSAs). It was found that by employing the composite MSA, five chlorinated VOCs were accurately discriminated at 95.56%, which was an increase in accuracy as compared to pure ILs MSA (84.45%). Data acquired with two out of three VSAs allowed discrimination of chlorinated VOCs with 100% accuracy. These studies have provided greater insight into the benefits of incorporating polymers in coating materials for enhanced discrimination accuracies of QCM-based sensor arrays. To the best of our knowledge, this is the first report of a QCM-based VSA for discrimination of closely related chlorinated VOCs.

Affinity Ionic Liquids for Chemoselective Gas Sensing

Selective gas sensing is of great importance for applications in health, safety, military, industry and environment. Many man-made and naturally occurring volatile organic compounds (VOCs) can harmfully affect human health or cause impairment to the environment. Gas analysis based on different principles has been developed to convert gaseous analytes into readable output signals. However, gas sensors such as metal-oxide semiconductors suffer from high operating temperatures that are impractical and therefore have limited its applications. The cost-effective quartz crystal microbalance (QCM) device represents an excellent platform if sensitive, selective and versatile sensing materials were available. Recent advances in affinity ionic liquids (AILs) have led them to incorporation with QCM to be highly sensitive for real-time detection of target gases at ambient temperature. The tailorable functional groups in AIL structures allow for chemoselective reaction with target analytes for single digit parts-per-billion detection on mass-sensitive QCM. This structural diversity makes AILs promising for the creation of a library of chemical sensor arrays that could be designed to efficiently detect gas mixtures simultaneously as a potential electronic in future. This review first provides brief introduction to some conventional gas sensing technologies and then delivers the latest results on our development of chemoselective AIL-on-QCM methods.

Exploring silver ionic liquids for reaction-based gas sensing on a quartz crystal microbalance

This work involves direct synthesis of functional silver ionic liquids in water, and is label-free and chemoselective with superior reactivity toward targeted gases and, most significantly, insensitive to moisture.

Rheological changes and kinetics of water uptake by poly(ionic liquid)-based thin films

Water uptake by thin films composed of the poly(ionic liquid) poly[diallyldimethylammonium bis(trifluoromethanesulfonyl)imide] (PDDATf2N) and the ionic liquid N,N-butylmethylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr1.4Tf2N) was studied with a quartz crystal microbalance with dissipation. The data obtained for films with different compositions during the passage of dry and wet N2 flow through the films were simulated with the Kevin-Voigt viscoelastic model for assessment of the mass of uptake water as well as the viscoelastic parameters. Our results show that the ionic liquid acts as a plasticizer, reducing the rigidity of the film and decreasing the capacity of water uptake. Introduction to a Li salt (LiTf2N) increases the water uptake capacity and also affects both elastic and viscous parameters due to aggregation among the ions from the ionic liquid and Li(+). However, due to the preferable interaction of Li(+) ions with water molecules, these aggregates are broken when the film is hydrated. In short, the presence of water in such films affects their mechanical properties, which can reflect in their performances as solid state electrolytes and ion-conducting membranes for electrochemical applications.