π-Sticked Metal‒Organic Monolayers for Single-Metal-Site Dependent CO2 Photoreduction and Hydrogen Evolution Reaction

Hierarchical self-assembly of 2D metal‒organic layers (MOLs) for the construction of advanced functional materials have witnessed considerable interest, due to the increasing atomic utilizations and well-defined atom‒property relationship. However, the construction of atomically precise MOLs with mono-/few-layered thickness through hierarchical self-assembly process remains a challenge, mostly because the elaborate long-range order is difficult to control via conventional noncovalent interaction. Herein, a quadruple π-sticked metal‒organic layer (πMOL) is reported with checkerboard-like lattice in ≈1.0 nanometre thickness, on which the catalytic selectivity can be manipulated for highly efficient CO2 reduction reaction (CO2RR) and hydrogen evolution reaction (HER) over a single metal site. In saturated CO2 aqueous acetonitrile, Fe-πMOL achieves a highly effective CO2RR with the yield of ≈3.98 mmol g‒1 h‒1 and 91.7% selectivity. In contrast, the isostructural Co-πMOL as well as mixed metallic FeCo-πMOL exhibits a high activity toward HER under similar conditions. DFT calculations reveal that single metal site exhibits the significant difference in CO2 adsorption energy and activation barrier, which triggers highly selective CO2RR for Fe site and HER for Co site, respectively. This work highlights the potential of supramolecular π…π interaction for constructing monolayer MOL materials to uniformly distribute the single metal sites for artificial photosynthesis.

Metal-organic frameworks (MOFs) for energy production and gaseous fuel and electrochemical energy storage applications

The increasing energy demands in society and industrial sectors have inspired the search for alternative energy sources that are renewable and sustainable, also driving the development of clean energy storage and delivery systems. Various solid-state materials (e.g., oxides, sulphides, polymer and conductive nanomaterials, activated carbon and their composites) have been developed for energy production (water splitting-H2 production), gaseous fuel (H2 and CH4) storage and electrochemical energy storage (batteries and supercapacitors) applications. Nevertheless, the low surface area, pore volume and conductivity, and poor physical and chemical stability of the reported materials have resulted in higher requirements and challenges in the development of energy production and energy storage technologies. Thus, to overcome these issues, the development of metal-organic frameworks (MOFs) has attracted significant attention. MOFs are a class of porous materials with extremely high porosity and surface area, structural diversity, multifunctionality, and chemical and structural stability, and thus they can be used in a wide range of applications. In the present review, we precisely discuss the interesting properties of MOFs and the various methodologies for their synthesis, and also the future dependence on the valorization of solid waste for the recovery of metals and organic ligands for the synthesis of new classes of MOFs. Subsequently, the utilization of these interesting characteristics for energy production (water splitting), storage of gaseous fuels (H2 and CH4), and electrochemical storage (batteries and supercapacitors) applications are described. However, although MOFs are efficient materials with versatile uses, they still have many challenges, limiting their practical applications. Therefore, finally, we highlight the challenges associated with MOFs and show the way forward in overcoming them for the development of these highly porous materials with large-scale practical utility.

Core-Shell Composite MIL-101(Cr)@TiO2 for Organic Dye Pollutants and Vehicle Exhaust

MIL-101(Cr)@TiO₂ core-shell composite material was synthesized via the hydrothermal method, where MIL-101(Cr) served as the core and TiO₂ acted as the shell. SEM results revealed that the metal-organic framework core effectively prevented the aggregation of TiO₂ nanoparticles and facilitated their dispersion. Characterization techniques such as XRD, XPS, and TGA were utilized to confirm the successful loading of TiO₂ onto MIL-101(Cr) and its excellent thermal stability. MIL-101(Cr)@TiO₂ was employed in photocatalytic degradation of dye pollutants and vehicle exhaust, and the potential degradation mechanisms were investigated in detail. The results showed that MIL-101(Cr)@TiO₂ exhibited excellent photocatalytic degradation performance towards dye pollutants, with degradation efficiencies of 91.7% and 67.8% achieved for MB and RhB, respectively, under visible light irradiation for 90 min. Furthermore, the photocatalytic degradation of automobile exhaust revealed that the MIL-101(Cr)@TiO₂ composite material also exhibited degradation effects on NO_x, CO, and HC. The degradation efficiency for NO reached 24.2%, indicating its broader applicability.

A Novel Composite of Zinc-based Metal Organic Framework Embedded with SnO2 Nanoparticle as a Photocatalyst for Methylene Blue Dye Degradation as well as Fluorometric Probe for Nitroaromatic Compounds Detection

A facile bottom up synthesis technique is opted for the preparation of novel composite SnO₂@Zn-BTC. This synthesized composite is fully characterized by Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS), and Elemental mapping techniques. Optical analysis was performed using UV-Visible absorption spectroscopy and fluorescence studies. Further this composite was utilized for the first time as a photocatalyst for methylene blue (MB) dye degradation under sunlight irradiation. This photocatalyst shows degradation efficiency of 89% within 100 min of exposure of sunlight. In addition to that, the synthesized composite can be utilized as a fluorescence probe for detection of NACs via 'turn-off" quenching response. This composite is extremely sensitive towards 3-NA in aqueous medium with quenching efficiency of 75.42%, which is highest quenching rate till reported. There occurs no interference for detecting 3-NA in the presence of other NACs. The linear fitting of the Stern-Volmer plot for 3-NA shows large quenching constant (K_SV) of 0.0115 ppb^-1 with correlation coefficient R² = 0.9943 proves higher sensitivity of composite in sensing process. The outstanding sensitivity of composite for 3-NA is certified by the low detection limit (LOD) of 25 ppb (0.18 µM). Photoinduced Electron Transfer (PET) and Fluorescence Resonance Energy Transfer (FRET) are the mechanisms used for clarification of quenching response of PL intensity by NACs via density functional theory (DFT) calculations and extent spectral overlap, respectively. Hence, synthesized composite is verified as multi-component system to act as excellent photocatalyst as well as fluorescent sensor.

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.

Metal organic frameworks derived functional materials for energy and environment related sustainable applications

With the vigorous development of industrial economy, energy and environmental problems have become the most serious issues affecting people's production and life. Therefore, the demand for clean energy production, effective separation and storage is growing. Metal-organic frameworks (MOFs), as a kind of porous crystalline materials with large surface area and porosity, which is self-assembled by metal ions or clusters and organic ligands through coordination bonds. Thanks to a number of unique characteristics such as adjustable pore environment, homogeneous void structure, abundant active sites, unprecedented chemical composition tunability and functional versatility, it has been widely studied, especially for the clean energy conversion in catalysis. In this review, we focus on the research progress of clean energy in catalysis based on MOFs. Emphasis is placed on MOFs with different structures of compositions and their applications in catalytic for clean energy conversion, such as CO oxidation, CO₂ reduction and H₂ evolution. In addition, the situation of MOFs assisting environmental remediation is also briefly described. Finally, the prospects and challenges of MOFs in clean energy and the remaining issues in this field are presented.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Designing a novel heterostructure AgInS2@MIL-101(Cr) photocatalyst from PET plastic waste for tetracycline degradation

Semiconductor-containing porous materials with a well-defined structure could be unique scaffolds for carrying out selective organic transformations driven by visible light. We herein introduce for the first time a heterostructure of silver indium sulfide (AgInS₂) ternary chalcogenide and a highly porous MIL-101(Cr) metal-organic framework (MOF) synthesised from polyethylene terephthalate plastic waste. Our results demonstrate that AgInS₂ nanoparticles were uniformly attached to each lattice plane of the octahedral MIL-101(Cr) structure, resulting in a nanocomposite with a high distribution of semiconductors in a porous media. We also demonstrate that the nanocomposite with up to 40% of AgInS₂ doping exhibited excellent catalytic activity for tetracycline degradation under visible light irradiation (∼99% tetracycline degraded after 4 h) and predominantly maintained its performance after five cycles. These results could promote a new material circularity pathway to develop new semiconductors that can be used to protect water from further pollution.

ZIF-9(III) nanosheets synthesized in ionic liquid/ethanol mixture for efficient photocatalytic hydrogen production

To improve the photocatalytic performance of metal-organic frameworks is of great importance. We synthesized the nanosheets of a zeolitic imidazolate framework (ZIF-9(III)) in ionic liquid/ethanol solution, with an average thickness of 4.6 nm. The as-synthesized ZIF-9(III) nanosheets have optoelectronic properties superior to the three-dimensional ZIF-9(III) synthesized by the conventional solvothermal method. The ZIF-9(III) nanosheets exhibit high activity for photocatalytic hydrogen production under visible light irradiation. The maximum hydrogen production rate can reach 112.37 mmol g^-1 h^-1, while that by three-dimensional ZIF-9(III) is 29.64 mmol g^-1 h^-1 under the same experimental conditions.

Rational design of ZnO-zeolite imidazole hybrid nanoparticles with reduced charge recombination for enhanced photocatalysis

Semiconducting zinc oxide nanoparticles (ZnO NPs) hold great potential as photocatalysts in wastewater treatment because of their favorable bandgap and cost-effectiveness. Unfortunately, ZnO NPs usually show rapid charge recombination that limits their photocatalytic efficacy significantly. Herein, we report a facile way of modifying ZnO NPs with zeolite imidazole framework-8 (ZIF8). A synergy between the two components may tackle the drawback of fast charge recombination for pristine ZnO NPs. Improved performance of photocatalytic degradation of methylene blue (MB) is confirmed by comparing with pristine ZnO and ZIF8 as the catalysts. The ZIF8 in the composite serves as a trap for photogenerated electrons, thus reducing the rate of charge recombination to enhance the photocatalysis rate. In addition, the hybridization process suppresses the aggregation of ZnO NPs, providing a large surface area and a greater number of active sites. Moreover, a small shift in the absorption band of ZnO@ZIF8 (10) NPs towards higher wavelength, also witnessed a little contribution towards enhanced photocatalytic properties. Mechanistic studies of the photocatalytic process of MB using ZnO@ZIF8 NPs catalyst reveal that hydroxyl radicals are the major reactive oxygen species. The facile hybridization of ZnO with ZIF8 provides a strategy for developing new photocatalysts with wide application potential.

Recent advances in ZnO-based photosensitizers: Synthesis, modification, and applications in photodynamic cancer therapy

Zinc oxide nanoparticles (ZnO NPs) are important semiconductor materials with interesting photo-responsive properties. During the past, ZnO-based NPs have received considerable attention for photodynamic therapy (PDT) due to their biocompatibility and excellent potential of generating tumor-killing reactive oxygen species (ROS) through gentle photodynamic activation. This article provides a comprehensive review of the recent developments and improvements in optical properties of ZnO NPs as photosensitizers for PDT. The optical properties of ZnO-based photosensitizers are significantly dependent on their charge separation, absorption potential, band gap engineering, and surface area, which can be adjusted/tuned by doping, compositing, and morphology control. Here, we first summarize the recent progress in the charge separation capability, absorption potential, band gap engineering, and surface area of nanosized ZnO-based photosensitizers. Then, morphology control that is closely related to their synthesis method is discussed. Following on, the state-of-art for the ZnO-based NPs in the treatment of hypoxic tumors is comprehensively reviewed. Finally, we provide some outlooks on common targeted therapy methods for more effective tumor killing, including the attachment of small molecules, antibodies, ligands molecules, and receptors to NPs which further improve their selective distribution and targeting, hence improving the therapeutic effectiveness. The current review may provide useful guidance for the researchers who are interested in this promising dynamic cancer treatment technology.

Upcycling of Hazardous Metals and PET Waste derived Metal-Organic Frameworks: A Review in Recent Progress and Prospects

An intense increase in non-biodegradable plastics and waste metals is an immediate threat to the world and needs to be addressed urgently. There are several strategies deployed to control, eliminate,...

Boron nitride quantum dots decorated MIL-100(Fe) for boosting the photo-generated charge separation in photocatalytic refractory antibiotics removal

Metal organic frameworks (MOFs) have great potential for photocatalysis, but only possess moderate activity due to their slow charge transfer and low solar energy conversion. Herein, heterostructures photocatalysts constructed by boron nitride quantum dots (BNQDs) and MIL-100(Fe) (MNB) were successfully fabricated for overcoming these shortcomings. It was indicated that the composites possessed large surface area, mesoporous structure, and enhanced visible light absorption. The MNB photocatalysts exhibited excellent photocatalytic activity for tetracycline hydrochloride (TC-HCl) degradation under visible light irradiation. Compared with MIL-100(Fe), the photodegradation rate of TC-HCl by MNB-1 was 0.02383 min^-1, which was 5.3 times higher than that of pure MIL-100(Fe). The close contact of MIL-100(Fe) with BNQDs and the synergistic effect between them were the main reasons for the improved photodegradation performance. This study reveals that a rational combination of MIL-100(Fe) and BNQDs can improve photocatalytic activity to enhance molecular oxygen activation. Therefore, it is reasonable to believe that quantum dots/MOFs photocatalysts have great potential in environmental remediation.

In-situ development of metal organic frameworks assisted ZnMgAl layered triple hydroxide 2D/2D hybrid as an efficient photocatalyst for organic dye degradation

Metal organic framework (MOF) supported layered triple hydroxide (LTH) 2D/2D hybrid material was prepared by a simple hydrothermal method. The photophysical properties of the prepared samples were investigated through a set of analytical methods such as X-ray diffraction, Fourier-transform infrared spectroscopy, field emission scanning electron microscope, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy and mapping. The photocatalytic degradation activity of as prepared 2D/2D MOF-5/LTH hybrid sample was investigated against methylene blue (MB) dye under the UV-visible light irradiation. The degradation efficiency of the MOF-5/LTH hybrid sample was twice a time greater than that of pristine MOF-5, particularly degradation efficiency of the MOF-5, LTH and MOF-5/LTH hybrid samples are 43.3, 57.7 and 98.1% respectively. The Pseudo first order rate and the reusing investigation was further used to study the catalytic activity and stability of the as-synthesized 2D/2D photocatalyst. The observed improvement in the photocatalytic activity of the hybrid samples were owed to enhance visible light absorption, efficient separation and transportation of photoinduced electrons and holes.

Colloidal nano-MOFs nucleate and stabilize ultra-small quantum dots of lead bromide perovskites

The development of synthetic routes to access stable, ultra-small (i.e. <5 nm) lead halide perovskite (LHP) quantum dots (QDs) is of fundamental and technological interest. The considerable challenges include the high solubility of the ionic LHPs in polar solvents and aggregation to form larger particles. Here, we demonstrate a simple and effective host-guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites. Cr3O(OH)(H2O)2(terephthalate)3 (Cr-MIL-101), made of large mesopore-sized pseudo-spherical cages, allows fast and efficient diffusion of perovskite precursors within its pores, and promotes the formation of stable, ∼3 nm-wide lead bromide perovskite QDs. CsPbBr3, MAPbBr3 (MA+ = methylammonium), and (FA)PbBr3 (FA+ = formamidinium) QDs exhibit significantly blue-shifted emission maxima at 440 nm, 446 nm, and 450 nm, respectively, as expected for strongly confined perovskite QDs. Optical characterization and composite modelling confirm that the APbBr3 (A = Cs, MA, FA) QDs owe their stability within the MIL-101 nanocrystals to both short- and long-range interfacial interactions with the MOF pore walls.

Refine the crystallinity of upconversion nanoparticles for NIR-enhanced photocatalysis

A new photocatalyst was synthesized by a combination of the upconversion nanoparticle NaYF4:Yb, Tm, Gd (NYTG) and NH2-MIL-101(Cr) (NMC) to form NYTG/NMC.

Novel strategy for membrane biofouling control in MBR with CdS/MIL-101 modified PVDF membrane by in situ visible light irradiation

Novel control strategies for membrane biofouling with eco-friendly photocatalytic technology are critically needed in practical operation of membrane bioreactors (MBRs). In this study, a metal-organic frameworks (MOF) based photocatalytic membrane was firstly applied in an anammox MBR for a long-term biofouling control, where bacteria were inactivated and foulants were degraded simultaneously, with environmentally friendly and renewable visible light energy. By physicochemical characterization, the synthesized photocatalyst of CdS/MIL-101 showed superior visible-light photocatalytic ability, and the 1 wt% CdS/MIL-101 modified membrane C2 showed enhanced hydrophilicity and water permeability compared with the pristine membrane C0. In the long-term operation of anammox MBRs under waterproof lights irradiation, the filtration cycles of C2 (25-26 d) were obviously extended compared with C0 (10-14 d), while their average total nitrogen removal efficiencies were comparable up to 84%, indicating an excellent biofouling alleviation effect by using C2 with a satisfactory nitrogen removal performance maintained. By analysis of the biofilm on the fouled membranes, the organic foulants (especially extracellular polymeric substances) were degraded, and the live bacteria were inactivated effectively by the photocatalytic reactions of CdS/MIL-101 on C2. In the antimicrobial tests against model bacteria, C2 exhibited remarkable antimicrobial effect against both Gram-negative and Gram-positive bacteria with visible light irradiation by destruction of cell integrity with the inhibition rate of 92% for Escherichia coli and 95% for Staphylococcus aureus, respectively. In the model foulants (bovine serum albumin, sodium alginate, and humic acid) filtration tests, C2 showed higher antifouling capabilities, lower flux declining rates, and higher foulants rejection rates under visible light irradiation compared with C0. The reactive species of ·OH, e^- and h⁺ generated on C2 were verified to play the predominant role in the anti-biofouling processes by simultaneous bacteria inactivation and foulants degradation. The findings offer a novel insight into the biofouling controlling in MBRs by simultaneous bacteria inactivation and foulants degradation with an eco-friendly method.

Development of MOF-based heterostructures for photocatalytic hydrogen evolution

The construction of metal-organic framework (MOF) based heterostructures are a promising strategy to improve the photocatalytic hydrogen evolution activities of MOFs. For the intrinsic porosity, inorganic-organic hybrid nature and structural tunability of MOFs, a wide variety of MOF-based heterostructured photocatalysts with improved hydrogen evolution activities have been fabricated. In this frontier article, we present the latest advances in MOF-based heterostructures for photocatalytic hydrogen evolution. The opportunities and challenges related to MOF-based heterostructured photocatalysts are also presented.

Photo-electrochemical detection of dopamine in human urine and calf serum based on MIL-101 (Cr)/carbon black

A new photo-electrochemical sensor based on MIL-101(Cr) MOF/carbon black (CB) is fabricated and characterized. By using differential pulse voltammetry, dopamine (DA) can be effectively detected using a photo-electrochemical MIL-101(Cr)/CB sensor under visible light. The CB acts as the electron bridge to combine with the large specific surface area and photo-catalytic feature of MOF, which contribute to the improvements of sensitivity of DA detection. The concentration of the catalyst, pH value, accumulation potential, and accumulation time were also optimized. Furthermore, the electrochemical performances of MIL-101(Cr)/CB sensor was investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scan rate, electrochemically active surface area (ECSA), and amperometric responses. A detection limit of 0.38 nM (LOD = 3 s_b/S, s_b = 0.028) and a working range of 1 nM to 2.22 μM has been achieved. The MIL-101(Cr)/CB sensor exhibits excellent reproducibility, stability, and selectivity and also has satisfactory recovery rate for the analysis of real samples including calf serum and human urine. Graphical abstract.

UiO-66(Ti)-Fe3O4-WO3 photocatalyst for efficient ammonia degradation from wastewater into continuous flow-loop thin film slurry flat-plate photoreactor

This work presents the characterization of novel synthesized UiO-66(Ti)-Fe₃O₄-WO₃ magnetic photocatalyst and investigates their photocatalytic activity for the photodegradation of ammonia in a designed continuous flow-loop thin-film slurry flat-plate photoreactor (TFSR). Excellent ammonia degradation efficiency was achieved in the presence of the synthesized catalyst at ambient conditions using no more reactive oxidant species. Several independent variables involving catalyst mass, flowrate, pH, irradiation time and initial ammonia concentration as well as corresponding experiments were analyzed and design using the central composite design (CCD). The influence and significance of each parameter and their binary interactions were then evaluated by applying the analysis of variance. The ammonia degradation efficiency of 91.80 % with the desirability of 0.903 were obtained at optimum values of operational parameters including 550 mL/min,10, 0.125 g/L, 60 min and 30 mg/L for solution flowrate, pH, catalyst mass, irradiation time and initial ammonia concentration, respectively. Furthermore, the liquid phase products of ammonia degradation such as nitrate and nitrite ions were completely removed, and purified water was produced using the combination of reverse osmosis process and mixed resins beds. The photocatalyst mechanism study revealed that [Formula: see text] was the predominant reactive oxygen species in the ammonia photodegradation.

A metal-organic framework with in situ generated low-coordinate binuclear Cu(i) units as a highly effective catalyst for photodriven hydrogen production

Herein, we report a metal-organic framework featuring a binuclear copper unit, showing extraordinarily high catalytic activity (102.8 mmol g-1 h-1) for photodriven hydrogen generation, which is attributed to the synergistic catalytic effect between the two copper ions.

Two-Dimensional Materials and Composites as Potential Water Splitting Photocatalysts: A Review

Hydrogen production via water dissociation under exposure to sunlight has emanated as an environmentally friendly, highly productive and expedient process to overcome the energy production and consumption gap, while evading the challenges of fossil fuel depletion and ecological contamination. Various classes of materials are being explored as viable photocatalysts to achieve this purpose, among which, the two-dimensional materials have emerged as prominent candidates, having the intrinsic advantages of visible light sensitivity; structural and chemical tuneability; extensively exposed surface area; and flexibility to form composites and heterostructures. In an abridged manner, the common types of 2D photocatalysts, their position as potential contenders in photocatalytic processes, their derivatives and their modifications are described herein, as it all applies to achieving the coveted chemical and physical properties by fine-tuning the synthesis techniques, precursor ingredients and nano-structural alterations.