Nanobioelectrocatalysis Using Human Liver Microsomes and Cytochrome P450 Bactosomes: Pyrenyl-Nanocarbon Electrodes

Human liver microsomes containing various drug-metabolizing cytochrome P450 (P450) enzymes, along with their NADPH-reductase bound to phospholipid membranes, were absorbed onto 1-pyrene butylamine pi-pi stacked with amine-functionalized multiwalled carbon nanotube-modified graphite electrodes. The interfaced microsomal biofilm demonstrated direct electrochemical communication with the underlying electrode surface and enhanced oxygen reduction electrocatalytic activity typical of heme enzymes such as P450s over the unmodified electrodes and nonenzymatic currents. Similar enhancements in currents were observed when the bioelectrodes were constructed with recombinant P450 2C9 (single isoform) expressed bactosomes. The designed liver microsomal and 2C9 bactosomal bioelectrodes successfully facilitated the electrocatalytic conversion of diclofenac, a drug candidate, into 4'-hydroxydiclofenac. The enzymatic electrocatalytic metabolite yield was several-fold greater on the modified electrodes than on the unmodified bulk graphite electrodes adsorbed with a microsomal or bactosomal film. The nonenzymatic metabolite production was less than the enzymatically catalyzed metabolite yield in the designed microsomal and bactosomal biofilm electrodes. To test the throughput potential of the designed biofilms, eight-electrode array configurations were tested with the microsomal and bactosomal biofilms toward electrochemical 4'-hydroxydiclofenac metabolite production from diclofenac. The stability of the designed microsomal bioelectrode was assessed using nonfaradaic impedance spectroscopy over 40 h, which indicated good stability.

Modulating the adsorption orientation of methionine-rich laccase by tailoring the surface chemistry of single-walled carbon nanotubes

Achieving fast electron transfer process between oxidoreductase and electrodes is pivotal for the biocathode of enzymatic biofuel cells (EBFCs). However, in-depth understanding of the interplay mechanism between enzymes and electrode materials remains challenging when designing and constructing EBFCs. Herein, atomic-scale insight into the direct electron transfer (DET) behavior of Thermus thermophilus laccase (TtLac) with a special methionine-rich β-hairpin motif adsorbed on the carboxyl-functionalized carbon nanotube (COOH-CNT) and amino-functionalized carbon nanotube (NH₂-CNT) surfaces were disclosed by multi-scale molecular simulations. Simulation results reveal that electrostatic modification is an effective way to tune the DET behavior for TtLac on the modified-CNTs electrode surface. Surprisingly, the positively charged TtLac can be attracted by both negatively charged COOH-CNT and positively charged NH₂-CNT surfaces, yet only the latter is capable to trigger the DET process due to the 'lying-on' adsorption orientation. Specifically, the T1 copper site is near the methionine-rich β-hairpin motif, which is the key binding site for TtLac binding onto the NH₂-CNT surface via electrostatic interaction, π-π stacking and cation-π interaction. Moreover, TtLac on the NH₂-CNT surface undergoes less conformational changes than those on the COOH-CNT surface, which allows the laccase stability and catalytic efficiency to be well preserved. These findings provide a fundamental guidance for future design and fabrication of methionine-rich laccase-based EBFCs with high power output and long lifespan.

Interface engineering with self-assembling Au@Ag@β-cyclodextrin bimetal nanoparticles to fabricate a ring-like arrayed SERS substrate for sensitive recognition of phthalate esters based on a host-guest interaction and the coffee ring effect

Herein, Au@Ag@β-cyclodextrin (β-CD) nanoparticles with a relatively uniform shape and size of ∼13 nm in diameter have been successfully synthesized, and the surfaces of the synthesized nanoparticles are successful modified by β-CD. A highly efficient synthetic approach was developed for the preparation of a surface-enhanced Raman spectroscopy (SERS) substrate, which self-assembles Au@Ag@β-CD nanoparticles and analytes into a coffee ring pattern via the coffee ring effect. The coffee ring effect can make phthalates (PAEs) aggregate to the edge together with the Au@Ag@β-CD nanoparticles and concentration enrichment can be achieved. In addition, the surface of the core-shell Au@Ag@β-CD is modified with β-CD with a cavity structure, which can enrich analyte concentration by adsorbing the analytes into the hydrophobic cavity using host-guest recognition. This enrichment process not only improves the concentration of the surface of the analyte but also effectively distinguishes it from other substances in the analyte solution. The mechanism of enrichment and host-guest recognition is verified by subsequent molecular docking simulation. Thus, a ring-like arrayed SERS substrate with dual-strategy enrichment is used to detect PAEs. The experiments using the ring-like arrayed SERS substrate, gave a limit of detection of 0.2 nM for DOP detection, the recovery rate of the spiked samples ranged from 92.3% to 106.6%, and an RSD of less than 6% for PAE detection is obtained. This work provided a simple, rapid, low-cost, highly sensitive and stable method for PAE detection in life and the environment.

Molecular mechanism of direct electron transfer in the robust cytochrome-functionalised graphene nanosystem

Molecular mechanism of DET between graphene and cytochrome c depends on the metal in the bio-organic interface: Co enhances the cathodic current via electron hopping from graphene to haem, whereas Ni exerts the opposite effect via tunnelling.

Rational Surface Modification of Carbon Nanomaterials for Improved Direct Electron Transfer-Type Bioelectrocatalysis of Redox Enzymes

Interfacial electron transfer between redox enzymes and electrodes is a key step for enzymatic bioelectrocatalysis in various bioelectrochemical devices. Although the use of carbon nanomaterials enables an increasing number of redox enzymes to carry out bioelectrocatalysis involving direct electron transfer (DET), the role of carbon nanomaterials in interfacial electron transfer remains unclear. Based on the recent progress reported in the literature, in this mini review, the significance of carbon nanomaterials on DET-type bioelectrocatalysis is discussed. Strategies for the oriented immobilization of redox enzymes in rationally modified carbon nanomaterials are also summarized and discussed. Furthermore, techniques to probe redox enzymes in carbon nanomaterials are introduced.

Influence of Ligand Denticity and Flexibility on the Molecular Copper Mediated Oxygen Reduction Reaction

To date, the copper complex with the tris(2-pyridylmethyl)amine (tmpa) ligand (Cu-tmpa) catalyzes the ORR with the highest reported turnover frequency (TOF) for any molecular copper catalyst. To gain insight into the importance of the tetradentate nature and high flexibility of the tmpa ligand for efficient four-electron ORR catalysis, the redox and electrocatalytic ORR behavior of the copper complexes of 2,2′:6′,2″-terpyridine (terpy) and bis(2-pyridylmethyl)amine (bmpa) (Cu-terpy and Cu-bmpa, respectively) were investigated in the present study. With a combination of cyclic voltammetry and rotating ring disk electrode measurements, we demonstrate that the presence of the terpy and bmpa ligands results in a decrease in catalytic ORR activity and an increase in Faradaic efficiency for H₂O₂ production. The lower catalytic activity is shown to be the result of a stabilization of the Cu^I state of the complex compared to the earlier reported Cu-tmpa catalyst. This stabilization is most likely caused by the lower electron donating character of the tridentate terpy and bmpa ligands compared to the tetradentate tmpa ligand. The Laviron plots of the redox behavior of Cu-terpy and Cu-bmpa indicated that the formation of the ORR active catalyst involves relatively slow electron transfer kinetics which is caused by the inability of Cu-terpy and Cu-bmpa to form the preferred tetrahedral coordination geometry for a Cu^I complex easily. Our study illustrates that both the tetradentate nature of the tmpa ligand and the ability of Cu-tmpa to form the preferred tetrahedral coordination geometry for a Cu^I complex are of utmost importance for ORR catalysis with very high catalytic rates.

Redox and electrocatalytic ORR behavior of the mononuclear copper complexes of 2,2′:6′,2″-terpyridine (terpy) and bis(2-pyridylmethyl)amine (bmpa) in neutral aqueous buffer solution: High Faradaic efficiencies for H₂O₂ production were revealed along the ORR active potential window using the rotating ring disk electrode (RRDE), and the foot-of-the-wave analysis (FOWA) was applied to describe the catalytic activity quantitatively. Additionally, the stability of the catalysts under operating conditions receives considerable attention.

Efficiency of Site-Specific Clicked Laccase-Carbon Nanotubes Biocathodes towards O2 Reduction

A maximization of a direct electron transfer (DET) between redox enzymes and electrodes can be obtained through the oriented immobilization of enzymes onto an electroactive surface. Here, a strategy for obtaining carbon nanotube (CNTs) based electrodes covalently modified with perfectly control-oriented fungal laccases is presented. Modelizations of the laccase-CNT interaction and of electron conduction pathways serve as a guide in choosing grafting positions. Homogeneous populations of alkyne-modified laccases are obtained through the reductive amination of a unique surface-accessible lysine residue selectively engineered near either one or the other of the two copper centers in enzyme variants. Immobilization of the site-specific alkynated enzymes is achieved by copper-catalyzed click reaction on azido-modified CNTs. A highly efficient reduction of O₂ at low overpotential and catalytic current densities over -3 mA cm^-2 are obtained by minimizing the distance from the electrode surface to the trinuclear cluster.

Orientation Control of Trametes Laccases on a Carbon Electrode Surface to Understand the Orientation Effect on the Electrocatalytic Activity

By using a carbon-coated anodic aluminum oxide (CAAO) film as a monolithic porous electrode for the immobilization of Trametes laccases (LACs), an attempt is made to control the orientation of LAC molecules toward the electrode surface simply by applying an electric potential to the CAAO film. Because the resulting film is characterized by a myriad of open, simple, and straight nanochannels with diameters as large as 40 nm, the O₂ diffusion problem in pores is minimized, thereby making it possible to highlight the effect of such orientation on the electrocatalytic activity as a biocathode. It has been evidenced that LAC molecules are favorably oriented for a smooth electron transfer from the electrode when the LACs are immobilized with applying a positive voltage to the electrode, and such favorable orientation exhibits 3.7-times higher electrocatalytic activity than unfavorable orientation. Furthermore, the orientation mechanism has been rationally explained in terms of local surface chemistry on a LAC molecule.

Immobilization of peroxidase on polypyrrole-cellulose-graphene oxide nanocomposite via non-covalent interactions for the degradation of Reactive Blue 4 dye

In the present study novel polypyrrole-cellulose-graphene oxide nanocomposite (PCeGONC) was employed for the immobilization of ginger peroxidase (GP) via simple adsorption mechanism. Immobilization of enzyme on the obtained support resulted in enhancement of the enzyme activity. The recovery of activity was 128% of the initial activity. Consequently, in 3 h stirred batch treatment, PCeGONC bound GP exhibited higher decolorization efficiency (99%) for Reactive Blue 4 (RB 4) dye as compared to free GP (88%). The immobilized GP exhibited higher operational stability and retained approximately 72% of its initial activity even after ten sequential cycles of dye decolorization in batch process. The kinetic characterization of PCeGONC bound GP revealed slightly lower K_m and 3.3 times higher V_max compared to free GP. Degraded products were identified on the basis of GC-MS analysis and degradation pathway was proposed accordingly which confirms enzymatic breakdown of RB 4 into low molecular weight compounds. Genotoxic assessment of GP treated RB 4 revealed significant reduction of its genotoxic potential. In-silico analysis identified that binding site of PCeGONC on enzyme is distinct and lies far away from the active site of the enzyme. Furthermore, it also revealed higher affinity of 1-hydroxybenzotriazole (a redox mediator) and RB 4 for PCeGONC bound enzyme as compared to the free enzyme. This is in consensus with the observed decrease in K_m of the immobilized GP.

Pyrene hydrogel for promoting direct bioelectrochemistry: ATP-independent electroenzymatic reduction of N2

We demonstrate a novel hydrogel material to facilitate direct bioelectrochemistry of a wide range of redox proteins and enable ATP-independent electroenzymatic reduction of N₂ by nitrogenase.

Enzymatic bioelectrocatalysis often requires an artificial redox mediator to observe significant electron transfer rates. The use of such mediators can add a substantial overpotential and obfuscate the protein's native kinetics, which limits the voltage of a biofuel cell and alters the analytical performance of biosensors. Herein, we describe a material for facilitating direct electrochemical communication with redox proteins based on a novel pyrene-modified linear poly(ethyleneimine). This method was applied for promoting direct bioelectrocatalytic reduction of O₂ by laccase and, by immobilizing the catalytic subunit of nitrogenase (MoFe protein), to demonstrate the ATP-independent direct electroenzymatic reduction of N₂ to NH₃.

Heteroatom-Doped Carbon Nanotube and Graphene-Based Electrocatalysts for Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is a key step that determines the performance of a variety of energy storage and conversion devices, such as fuel cells and metal-air batteries. Heteroatom-doped carbon nanotubes (CNTs) and graphenes have attracted increasing interest and hold great promise as efficient ORR catalysts to replace noble-metal-based catalysts, owing to their unique structure characteristics, excellent physicochemical properties, low cost, and rich resources. In this review, recent progress on the design, fabrication, and performance of heteroatom-doped CNT- and graphene-based catalysts is summarized, aiming to provide insights into the working mechanism of these heteroatom-doped nanocarbons in ORR. The advantages, challenges that remain, and possible solutions of these nanocarbon-based electrocatalysts are discussed. Finally, future developing trends of the CNT- and graphene-based ORR catalysts are proposed.

Supramolecular electrode assemblies for bioelectrochemistry

For more than three decades, the field of bioelectrochemistry has provided novel insights into the catalytic mechanisms of enzymes, the principles that govern biological electron transfer, and has elucidated the basic principles for bioelectrocatalytic systems. Progress in biochemistry, bionanotechnology, and our ever increasing ability to control the chemistry and structure of electrode surfaces has enabled the study of ever more complex systems with bioelectrochemistry. This feature article highlights developments over the last decade, where supramolecular approaches have been employed to develop electrode assemblies that increase enzyme loading on the electrode or create more biocompatible environments for membrane enzymes. Two approaches are particularly highlighted: the use of layer-by-layer assembly, and the modification of electrodes with planar lipid membranes.

Laccase-based biocathodes: Comparison of chitosan and Nafion

Chitosan and Nafion(®) are both reported as interesting polymers to be integrated into the structure of 3D electrodes for biofuel cells. Their advantage is mainly related to their chemical properties, which have a positive impact on the stability of electrodes such as the laccase-based biocathode. For optimal function in implantable applications the biocathode requires coating with a biocompatible semi-permeable membrane that is designed to prevent the loss of enzyme activity and to protect the structure of the biocathode. Since such membranes are integrated into the electrodes ultimately implanted, they must be fully characterized to demonstrate that there is no interference with the performance of the electrode. In the present study, we demonstrate that chitosan provides superior stability compared with Nafion(®) and should be considered as an optimum solution to enhance the biocompatibility and the stability of 3D bioelectrodes.

5,5-Dithiobis(2-nitrobenzoic acid) pyrene derivative-carbon nanotube electrodes for NADH electrooxidation and oriented immobilization of multicopper oxidases for the development of glucose/O2 biofuel cells

We report the functionalization of multi-walled carbon nanotubes (MWCNTs) electrodes by a bifunctional nitroaromatic molecule accomplished via π-π interactions of a pyrene derivative. DTNB (5,5'-dithiobis(2-nitrobenzoic acid)) has the particularity to possess both electroactivable nitro groups and negatively charged carboxylic groups. The integration of the DTNB-modified MWCNTs was evaluated for different bioelectrocatalytic systems. The immobilized DTNB-based electrodes showed electrocatalytic activity toward the oxidation of the reduced form of nicotinamide adenine dinucleotide (NADH) with low overpotential of -0.09V vs Ag/AgCl at neutral pH. Glucose dehydrogenase was successfully immobilized at the surface of DTNB-based electrodes and, in the presence of NAD⁺, the resulting bioelectrode achieved efficient glucose oxidation with high current densities of 2.03mAcm^-2. On the other hand, the aromatic structure and the negatively charged nature of the DTNB provoked orientation of both laccase and bilirubin oxidase onto the electrode, which enhanced their ability to undergo a direct electron transfer for oxygen reduction. Due to the proper orientation, low overpotentials were obtained (ca. 0.6V vs Ag/AgCl) and high electrocatalytic currents of about 3.5mAcm^-2 were recorded at neutral pH in O₂ saturated conditions for bilirubin oxidase electrodes. The combination of these bioanodes and bilirubin oxidase biocathodes provided glucose/O₂ enzymatic biofuel cells (EBFC) exhibiting an open-circuit potential of 0.640V, with an associated maximum current density of 2.10mAcm^-2. Moreover, the fuel cell delivered a maximum power density of 0.50mWcm^-2 at 0.36 V.

Enzymatic Biofuel Cells on Porous Nanostructures

Biofuel cells (BFCs) that utilize enzymes as catalysts represent a new sustainable and renewable energy technology. Numerous efforts have been directed to improve the performance of the enzymatic BFCs (EBFCs) with respect to power output and operational stability for further applications in portable power sources, self-powered electrochemical sensing, implantable medical devices, etc. The latest advances in EBFCs based on porous nanoarchitectures over the past 5 years are detailed here. Porous matrices from carbon, noble metals, and polymers promote the development of EBFCs through the electron transfer and mass transport benefits. Some key issues regarding how these nanostructured porous media improve the performance of EBFCs are also discussed.

Ready to use bioinformatics analysis as a tool to predict immobilisation strategies for protein direct electron transfer (DET)

Direct electron transfer (DET) to proteins is of considerable interest for the development of biosensors and bioelectrocatalysts. While protein structure is mainly used as a method of attaching the protein to the electrode surface, we employed bioinformatics analysis to predict the suitable orientation of the enzymes to promote DET. Structure similarity and secondary structure prediction were combined underlying localized amino-acids able to direct one of the enzyme's electron relays toward the electrode surface by creating a suitable bioelectrocatalytic nanostructure. The electro-polymerization of pyrene pyrrole onto a fluorine-doped tin oxide (FTO) electrode allowed the targeted orientation of the formate dehydrogenase enzyme from Rhodobacter capsulatus (RcFDH) by means of hydrophobic interactions. Its electron relays were directed to the FTO surface, thus promoting DET. The reduction of nicotinamide adenine dinucleotide (NAD(+)) generating a maximum current density of 1μAcm(-2) with 10mM NAD(+) leads to a turnover number of 0.09electron/s/molRcFDH. This work represents a practical approach to evaluate electrode surface modification strategies in order to create valuable bioelectrocatalysts.

Chemical modification of gold electrodes via non-covalent interactions

Chemically modifying electrode surfaces with redox active molecular complexes is an effective route to fabricating tailored functional materials.

Edge-to-edge interaction between carbon nanotube-pyrene complexes and electrodes for biosensing and electrocatalytic applications

We demonstrate here that the edge-to-edge interaction between carbon nanotubes (CNTs) and edge plane electrodes plays an important role in exposing a large proportion of the basal planes of the CNTs to allow enhanced π-π stacking of a pyrenyl compound and subsequent high density protein immobilization yielding large electrocatalytic currents.

Tuning laccase catalytic activity with phosphate functionalized carbon dots by visible light

The phosphate functionalized carbon dots (PCDs) with high biocompatibility and low toxicity can be used as efficient additives for the construction of laccase/PCDs hybrids catalyst. A series of experiments indicated that the activity of laccase/PCDs was higher than that of free laccase (increased by 47.7%). When laccase/PCDs hybrids catalyst was irradiated with visible light (laccase/PCDs-Light), its activity was higher than that of laccase/PCDs hybrids without light irradiation (increased by 92.1%). In the present system, the T1 Cu in laccase was combined with the phosphate group on PCDs, which can increase binding capacity of laccase/PCDs hybrids and substrate. Further, the visible light irradiation increased the donating and accepting electronic capability of the laccase/PCDs hybrids, improving their catalytic activity.

Recent progress in oxygen-reducing laccase biocathodes for enzymatic biofuel cells

This review summarizes different approaches and breakthroughs in the development of laccase-based biocathodes for bioelectrocatalytic oxygen reduction. The use of advanced electrode materials, such as nanoparticles and nanowires is underlined. The applications of recently developed laccase electrodes for enzymatic biofuel cells are reviewed with an emphasis on in vivo application of biofuel cells.

Voltammetric immunosensor assembled on carbon-pyrenyl nanostructures for clinical diagnosis of type of diabetes

Herein we report the first serum insulin voltammetric immunosensor for diagnosis of type 1 and type 2 diabetic disorders. The sensor is composed of multiwalled carbon nanotube-pyrenebutyric acid frameworks on edge plane pyrolytic graphite electrodes (PGE/MWNT/Py) to which an anti-insulin antibody was covalently attached. The detection of picomolar levels of serum insulin binding to the surface antibody was achieved by monitoring the decrease in voltammetric current signals of a redox probe taken in the electrolyte solution. This method offered a detection limit of 15 pM for free insulin present in serum. This detection limit was further lowered to 5 pM by designing serum insulin conjugates with poly(acrylic acid)-functionalized magnetite nanoparticles (100 nm hydrodynamic diameter) and detecting the binding of MNP-serum insulin conjugate to the surface insulin-antibody on PGE/MWNT/Py electrodes. When tested on real patient serum samples, the sensor accurately measured insulin levels. To our knowledge, this is the first report of a voltammetric immunosensor capable of both diagnosing and distinguishing the type of diabetes based on serum insulin levels in diabetic patients.

Laccase wiring on free-standing electrospun carbon nanofibres using a mediator plug

The enzyme laccase was wired on a free-standing electrospun carbon fiber mat using a cross-linker plug based on the pyrene modified electron shuttle ABTS.

Unusual Fe(CN)₆³⁻/⁴⁻ capture induced by synergic effect of electropolymeric cationic surfactant and graphene: characterization and biosensing application

Herein, a special microheterogeneous system for Fe(CN)6(3-/4-) capture was constructed based on graphene (GN) and the electropolymeric cationic surfactant, an amphiphilic pyrrole derivative, (11-pyrrolyl-1-yl-undecyl) triethylammonium tetrafluoroborate (A2). The morphology of the system was characterized by scanning electron microscope. The redox properties of the entrapped Fe(CN)6(3-/4-) were investigated by cyclic voltammetry and UV-visible spectrometry. The entrapped Fe(CN)6(3-/4-) exhibited highly electroactive with stable and symmetrical cyclic voltammetric signal. A dramatic negative shift in the half wave potential can be obtained due to the unusual Fe(CN)6(3-/4-) partitioning in in this microheterogeneous system based on poly(A2+GN). Finally, the entrapped Fe(CN)6(3-/4-) was applied in the construction of the enhanced biosensors to hydrogen peroxide and sulfide.

Recent advances in carbon nanotube-based enzymatic fuel cells

This review summarizes recent trends in the field of enzymatic fuel cells. Thanks to the high specificity of enzymes, biofuel cells can generate electrical energy by oxidation of a targeted fuel (sugars, alcohols, or hydrogen) at the anode and reduction of oxidants (O2, H2O2) at the cathode in complex media. The combination of carbon nanotubes (CNT), enzymes and redox mediators was widely exploited to develop biofuel cells since the electrons involved in the bio-electrocatalytic processes can be efficiently transferred from or to an external circuit. Original approaches to construct electron transfer based CNT-bioelectrodes and impressive biofuel cell performances are reported as well as biomedical applications.