Dramatically Enhancing Multiphoton Harvesting Metal-Organic Frameworks for NIR-II Photocatalysis through Functional Regulation of Octupolar Molecules

The development of effective multiphoton absorption (MPA) materials for near-infrared (NIR) light-driven photocatalysis holds great significance. In this study, we incorporated two multibranched cyclometallated iridium(III) modules with varying degrees of conjugation onto MPA-inert metal-organic frameworks (MOFs) to active MPA performance. Subsequently, the MOFs were further modified with Co(II) and hyaluronic acid (HA) to fabricate MINCH and MISCH, respectively. By introducing octupolar molecules and expanding the conjugation, MISCH exhibited a larger MPA cross section for efficient NIR light absorption and improved carrier transfer, leading to outstanding NIR light-driven multiphoton photocatalytic hydrogen production. Moreover, the HA modification enabled MISCH to achieve specific multiphoton photocatalytic hydrogen therapy for cancer cells. This study provides valuable insights into constructing highly active MPA materials for NIR light-driven photocatalysis, presenting a potential platform for hydrogen therapy in tumor treatment.

Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Atomic-Scale Elucidation of Unusually Distorted Dimeric Complexes Confined in a Zr-Based Metal-Organic Framework

Nanoconfinement in metal-organic framework (MOF) pores can lead to the isolation of unusual or reactive metal complexes. However, MOFs that support the stabilization and precise structural elucidation of metal complexes and small metal clusters are rare. Here, we report a thermally and chemically stable zirconium-based MOF (University of Adelaide Material-1001, UAM-1001) with a high density of free bis-pyrazolyl units that can confine mono- and dinuclear metal complexes. The precursor MOF, UAM-1000, has a high degree of structural flexibility, but post synthetic modification with a bracing linker, biphenyl-4,4'-dicarboxylic acid, partially rigidifies the MOF (UAM-1001). This allows "matrix isolation" and detailed structural elucidation of postsynthetically added dimeric complexes bound within a tetradentate binding site formed by two linkers. Dimeric species [Co2Cl4], [Cu2Cl4], [Ni2Cl3(H2O)2]Cl, and [Rh2(CO)3Cl2] were successfully isolated in UAM-1001 and characterized by single-crystal X-ray diffraction. Comparison of the UAM-1001 isolated species with similar complexes in the solid state reveals that UAM-1001 can significantly distort the structures and enforce notably shorter metal-metal distances. For example, MOF tethering allows isolation of a [Cu2Cl4] complex that rapidly reacts with water in the solid state. The stability, porosity, and modulated flexibility of UAM-1001 provide an ideal platform material for the isolation and study of new dimeric complexes and their reactivity.

Synthesis of a Cd-MOF Fluorescence Sensor and Its Detection of Fe3+, Fluazinam, TNP, and Sulfasalazine Enteric-Coated Tablets in Aqueous Solution

A Cd-based metal-organic framework (Cd-MOF), named after {[Cd(ttc)(H₂O)]·H₂O}_n (ttc = 1-imidazole-1-yl-2,4,6-benzene-tricarboxylic acid), was synthesized using the solvothermal reaction. The single-crystal structure was determined by single X-ray diffraction analysis, and crystalline characteristics and composition were confirmed by powder X-ray diffraction (PXRD) and thermogravimetric analysis (TG), respectively. Structural analysis showed that the Cd²⁺ ion is in the seven-coordinated mode, in which ttc^2- ion adopts the μ₄-η¹-η¹-η²-η² coordination mode. It is worth noting that the Cd²⁺ ion is connected to ttc^2- to form a 2D network, and the adjacent 2D network is expanded into a 3D supramolecular network structure through weak hydrogen bonds. The fluorescence sensing experiments indicated that Cd-MOF could not only be used as a fluorescence sensor for Fe³⁺, fluazinam (FLU), and 2,4,6-trinitrophenolol (TNP) but also for sulfasalazine detection in aqueous solution. To verify the sensitivity of the fluorescent probe, we calculated its detection limit: 5.34 × 10^-8 M (Fe³⁺), 7.8 × 10^-8 M (FLU), 1.21 × 10^-7 M (TNP), and 2.67 × 10^-7 M (SECT). In addition, the quenching mechanism was thoroughly studied.

Metal organic frameworks as promising sensing tools for electrochemical detection of persistent heavy metal ions from water matrices: A concise review

Water bodies are being polluted rapidly by disposal of toxic chemicals with their huge entrance into drinking water supply chain. Among these pollutants, heavy metal ions (HMIs) are the most challenging one due to their non-biodegradability, toxicity, and ability to biologically hoard in ecological systems, thus posing a foremost danger to human health. This can be addressed by robust, sensitive, selective, and reliable sensing of metal ions which can be achieved by Metal organic frameworks (MOF) based electrochemical sensors. In the present era, MOFs have caught greater interest in a variety of applications including sensing of hazardous pollutants such as heavy metal ions. So, in this review article, types, synthesis and working mechanism of MOF based sensors is explained to give general overview with updated literature. First time, detailed study is done for sensing of metal ions such as chromium, mercury, zinc, copper, manganese, palladium, lead, iron, cadmium and lanthanide by MOFs based electrochemical sensors. The use of MOFs as electrochemical sensors has attractive success story along with some challenges of the area. Considering these challenges, we attempted to highlight the milestone achieved and shortcomings along with future prospective of the MOFs for employing it in electrochemical sensing devices for HMIs. Finally, challenges and future prospects have been discussed to promote the development of MOFs-based sensors in future.

Expanding the Structural Topologies of Rare-Earth Porphyrinic Metal-Organic Frameworks through Ligand Modulation

Expanding the structural diversity of porphyrinic metal-organic frameworks (PMOFs) is essential to develop functional materials with novel properties or enhanced performance in different applications. Herein, we establish a strategy to construct rare-earth (RE) PMOFs with unprecedented topology via rational functionalization of porphyrinic ligands. By introducing phenyl/pyridyl groups to the meso-positions of the porphyrin core, the symmetries and connectivities of the ligands are tuned, and three RE-PMOFs (BUT-224/-225/-226) with new topologies are successfully obtained. In addition, BUT-225(Co), with both the Lewis basic and acidic sites, exhibits enhanced CO₂ uptake and higher catalytic activity for the cycloaddition of CO₂ and epoxides under mild conditions. This work reveals that the RE-PMOFs with novel topologies can be rationally designed and constructed through ligand functionalization, which provides insights into the construction of tailored PMOFs for various applications.

A Cu-functionalized MOF and multi-walled carbon nanotube composite modified electrode for the simultaneous determination of hydroquinone and catechol

Designing MOF-based materials with desired electrochemical activity and high electron conductivity may yield a novel electrochemical sensor that effectively detects various organic pollutants and conducts health monitoring. This study developed a facile and versatile electrochemical sensor for simultaneously monitoring the environmental pollutants hydroquinone (HQ) and catechol (CT). The electrodes are fabricated by modifying a GCE with a Cu-functionalized MOF (UiO-bpydc-Cu) and multi-walled carbon nanotubes (MWCNTs). The Cu-functionalized MOF effectively improved the electronic conductivity by metalating the 2,2'-bipyridyl-derived UiO-bpydc with Cu²⁺ ions. Moreover, due to the synergic effect, the composite electrode exhibits a significant voltammetric response to HQ's and CT's electro-redox. A rapid and sensitive method of synchronously detecting HQ and CT has been established by differential pulse voltammetry (DPV). The experiments reveal that the linear response ranges were 0.5-565 μM and 1-1350 μM for HQ and CT, respectively, with low detection limits of 0.361 μM and 0.245 μM. The proposed UiO-bpydc-Cu/MWCNTs/GCE electrochemical sensor shows high sensitivity, good anti-interference, reproducibility, and stability. It can also be applied for detecting HQ and CT in actual samples.

A Ratiometric Fluorescent Sensor Based on Dye/Tb (III) Functionalized UiO-66 for Highly Sensitive Detection of TDGA

Thiodiglycolic acid (TDGA) is a biomarker for monitoring vinyl chloride exposure. Exploring a facile, rapid and precise analysis technology to quantify TDGA is of great significance. In this research, we demonstrate a fluorescent sensor based on dual-emissive UiO-66 for TDGA detection. This ratiometric fluorescent material named C460@Tb-UiO-66-(COOH)₂ was designed and synthesized by introducing organic dye 7-diethylamino-4-methylcoumarin (C460) and Tb³⁺ into UiO-66-(COOH)₂. The as-obtained C460@Tb-UiO-66-(COOH)₂ samples showed highly selective recognition, excellent anti-interference and rapid response characteristics for the recognition of TDGA. The detection limit is 0.518 mg·mL^-1, which is much lower than the threshold of 20 mg·mL^-1 for a healthy person. In addition, the mechanism of TDGA-induced fluorescence quenching is discussed in detail. This sensor is expected to detect TDGA content in human urine.

High resolution solid state NMR in paramagnetic metal-organic frameworks

We study the metal-organic framework (MOF) ZIF-67 with ¹H and ¹³C nuclear magnetic resonance (NMR). In addition to the usual orbital chemical shifts, we observe spinning sideband manifolds in the NMR spectrum due to hyperfine interactions of the paramagnetic cobalt with ¹H and ¹³C. Both orbital and paramagnetic chemical shifts are in good agreement with values calculated from first principles, allowing high-confidence assignment of the observed peaks to specific sites within the MOF. Our measured resonance shifts, line shapes, and spin lattice relaxation rates are also consistent with calculated values. We show that molecules in the pores of the MOF can exhibit high-resolution NMR spectra with fast spin lattice relaxation rates due to dipole-dipole couplings to the Co²⁺ nodes in the ZIF-67 lattice, showcasing NMR spectroscopy as a powerful tool for identification and characterization of "guests" that may be hosted by the MOF in electrochemical and catalytic applications.

Functionalized MOF as a Sensitive Spectroscopic Probe for Hg2+, Co2+, and Al3+ Ions Detection in Aqueous Media

A modified metal-organic framework (MOF) named Al-MIL-53-N=SA-Br was synthesized via a Schiff-base reaction between the MOFs (Al-MIL-53-NH2) and 5-bromo salicylaldehyde. The robust functionalized Al-MIL-53-N=SA-Br was used as a novel spectrophotometric sensor for detecting Hg2+, Co2+, and Al3+ ions. In a wide range of concentrations, the absorption spectral intensity of Al-MIL-53-N=SA-Br increased linearly upon increasing the concentration of Hg2+, Co2+, and Al3+ ions. The limit of detection (LOD) of the proposed Al-MIL-53-N=SA-Br sensor reached 1.52 ppm of Hg2+ ion (7.56 × 10-9 M). Therefore, this study introduces a novel ratiometric Hg2+, Co2+, and Al3+ ions chemosensor. Simple treatment using thiourea or ethylenediaminetetraacetic acid can remove the metal ions from the used sensor and use it many times with a high efficiency. In addition, the Al-MIL-53-N=SA-Br sensor has a high adsorption capacity for these metal ions. The design of the robust Al-MIL-53-N=SA-Br sensor provided high stability, reproducibility, selectivity, high sensitivity, and a facile sensing design. Furthermore, the good absorption spectral stability of Al-MIL-53-N=SA-Br in aqueous media, the broad linear in sensing, and the low LOD of the Hg2+, Co2+, and Al3+ ions show its high potential in determining these ions in real water.

Enhanced water stability and high CO2 storage capacity of a Lewis basic sites-containing zirconium metal-organic framework

Metal-organic frameworks (MOFs) are an emerging class of materials employed for custom-designed purposes by judicious selection of linkers and metal ions. Among the MOFs composed of carboxylate linkers, Zr-based MOFs have attracted great attention due to their high thermal and chemical stabilities, which are important for practical applications, including capturing CO₂ from a point source. UiO-67(bipy) containing 2,2'-bipyridine-5,5'-dicarboxylate is particularly useful among the Zr-MOF family due to the Lewis basic sites of the linker; however, the hydrolytic stability of UiO-67(bipy) does not seem to be as high as those of UiO-66 and UiO-67. To improve the hydrolytic stability without sacrificing the adsorption enthalpy of CO₂ for selective CO₂ capture, in this study, we added hydrophobic methyl groups to the backbone of the bipyridine linker. The synthesized 6,6'-dimethyl-2,2'-bipyridine-5,5'-dicarboxylic acid (H₂Me₂bipy) was used to prepare a Zr-based MOF [MOF-553, Zr₆O₄(OH)₄(Me₂Bipy)₆]. In addition, the water stability and CO₂ adsorption capacity of MOF-553 were compared to those of UiO-67(bipy). We revealed that MOF-553 is more robust and has a higher CO₂ adsorption capacity than UiO-67(bipy), indicating that the methylation of the linker improves the water stability of the framework, which is advantageous for point-source CO₂ capture.

Zinc(ii) and cadmium(ii) amorphous metal-organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases

Two novel amorphous metal-organic frameworks (aMOFs) with chemical composition {[Zn2(MTA)]·4H2O·3DMF} n (UPJS-13) and {[Cd2(MTA)]·5H2O·4DMF} n (UPJS-14) built from Zn(ii) and Cd(ii) ions and extended tetrahedral tetraazo-tetracarboxylic acid (H4MTA) as a linker were prepared and characterised. Nitrogen adsorption measurements were performed on as-synthesized (AS), ethanol exchanged (EX) and freeze-dried (FD) materials at different activation temperatures of 60, 80, 100, 120, 150 and 200 °C to obtain the best textural properties. The largest surface areas of 830 m2 g-1 for UPJS-13 (FD) and 1057 m2 g-1 for UPJS-14 (FD) were calculated from the nitrogen adsorption isotherms for freeze-dried materials activated at mild activation temperature (80 °C). Subsequently, the prepared compounds were tested as adsorbents of greenhouse gases, carbon dioxide and methane, measured at high pressures. The maximal adsorption capacities were 30.01 wt% CO2 and 4.84 wt% CH4 for UPJS-13 (FD) and 24.56 wt% CO2 and 6.38 wt% CH4 for UPJS-14 (FD) at 20 bar and 30 °C.

Responses of Defect-Rich Zr-Based Metal-Organic Frameworks toward NH3 Adsorption

Understanding structural responses of metal-organic frameworks (MOFs) to external stimuli such as the inclusion of guest molecules and temperature/pressure has gained increasing attention in many applications, for example, manipulation and manifesto smart materials for gas storage, energy storage, controlled drug delivery, tunable mechanical properties, and molecular sensing, to name but a few. Herein, neutron and synchrotron diffractions along with Rietveld refinement and density functional theory calculations have been used to elucidate the responsive adsorption behaviors of defect-rich Zr-based MOFs upon the progressive incorporation of ammonia (NH₃) and variable temperature. UiO-67 and UiO-bpydc containing biphenyl dicarboxylate and bipyridine dicarboxylate linkers, respectively, were selected, and the results establish the paramount influence of the functional linkers on their NH₃ affinity, which leads to stimulus-tailoring properties such as gate-controlled porosity by dynamic linker flipping, disorder, and structural rigidity. Despite their structural similarities, we show for the first time the dramatic alteration of NH₃ adsorption profiles when the phenyl groups are replaced by the bipyridine in the organic linker. These molecular controls stem from controlling the degree of H-bonding networks/distortions between the bipyridine scaffold and the adsorbed NH₃ without significant change in pore volume and unit cell parameters. Temperature-dependent neutron diffraction also reveals the NH₃-induced rotational motions of the organic linkers. We also demonstrate that the degree of structural flexibility of the functional linkers can critically be affected by the type and quantity of the small guest molecules. This strikes a delicate control in material properties at the molecular level.

Defective Zr-Fumarate MOFs Enable High-Efficiency Adsorption Heat Allocations

Adsorption-driven heat transfer devices incorporating an efficient "adsorbent-water" working pair are attracting great attention as a green and sustainable technology to address the huge global energy demands for cooling and heating. Herein, we report the improved heat transfer performance of a defective Zr fumarate metal-organic framework (MOF) prepared in a water solvent (Zr-Fum HT). This material exhibits an S-shaped water sorption isotherm (P/P₀ = 0.05-0.2), excellent working capacity (0.497 mL_H2O mL^-1_MOF) under adsorption-driven cooling/chiller working conditions (T_{adsorption(ads)} = 30 °C, T_{condensation (con)} = 30 °C, and T_{desorption(des)} = 80 °C), very high coefficient of performances for both cooling (0.83) and heating (1.76) together with a relatively low driving temperature at 80 °C, a remarkable heat storage capacity (423.6 kW h m^-3_MOF), and an outstanding evaporation heat (343.8 kW h m^-3_MOF). The level of performance of the resultant Zr-Fum HT MOF is above those of all existing benchmark water adsorbents including MOF-801 previously synthesized in the N,N-dimethylformamide solvent under regeneration at 80 °C which is accessible from the solar source. This is coupled with many other decisive advantages including green synthesis and high proven chemical and mechanical robustness. The microscopic water adsorption mechanism of Zr-Fum HT at the origin of its excellent water adsorption performance was further explored computationally based on the construction of an atomistic defective model online with the experimental data gained from a subtle combination of characterization techniques.

Novel Systems and Membrane Technologies for Carbon Capture

Due to the global menace caused by carbon emissions from environmental, anthropogenic, and industrial processes, it has become expedient to consider the use of systems, with high trapping potentials for these carbon-based compounds. Several prior studies have considered the use of amines, activated carbon, and other solid adsorbents. Advances in carbon capture research have led to the use of ionic liquids, enzyme-based systems, microbial filters, membranes, and metal-organic frameworks in capturing CO2. Therefore, it is common knowledge that some of these systems have their lapses, which then informs the need to prioritize and optimize their synthetic routes for optimum efficiency. Some authors have also argued about the need to consider the use of hybrid systems, which offer several characteristics that in turn give synergistic effects/properties that are better compared to those of the individual components that make up the composites. For instance, some membranes are hydrophobic in nature, which makes them unsuitable for carbon capture operations; hence, it is necessary to consider modifying properties such as thermal stability, chemical stability, permeability, nature of the raw/starting material, thickness, durability, and surface area which can enhance the performance of these systems. In this review, previous and recent advances in carbon capture systems and sequestration technologies are discussed, while some recommendations and future prospects in innovative technologies are also highlighted.

Evolution of the Design of CH4 Adsorbents

In this review, the evolution of paradigm shifts in CH4 adsorbent design are discussed. The criteria used as characteristic of paradigms are first reports, systematic findings, and reports of record CH4 storage or deliverable capacity. Various paradigms were used such as the systematic design of micropore affinity and pore size, functionalization, structure optimization, high throughput in silico screening, advanced material property design which includes flexibility, intrinsic heat management, mesoporosity and ultraporosity, and process condition optimization. Here, the literature is reviewed to elucidate how the approach to CH4 adsorbent design has progressed and provide strategies that could be implemented in the future.

Unprecedented High Temperature CO2 Selectivity and Effective Chemical Fixation by a Copper-Based Undulated Metal-Organic Framework

Post- and precombustion CO₂ capture and separation are the vital challenges from industrial viewpoint, as the accessible technologies are not cost-effective and cumbersome. Thus, the development of functional metal-organic frameworks (MOFs) that are found to be promising materials for selective CO₂ capture, separation, and conversion is gaining an importance in the scientific world. Based on the strategic design, a new functionalized triazine-based undulated paddle-wheel Cu-MOF (1), {[Cu(MTABA)(H₂O)]·4H₂O·2EtOH·DMF}_n (where, H₂MTABA = 4,4'-((6-methoxy-1,3,5-triazine-2,4-diyl)bis(azanediyl))dibenzoic acid), has been synthesized under solvothermal conditions and fully characterized. MOF 1 contains a one-dimensional channel along the a-axis with pore walls decorated with open metal sites, and multifunctional groups (amine, triazine, and methoxy). Unlike other porous materials, activated 1 (1') possesses exceptional increment in CO₂/N₂ and CO₂/CH₄ selectivity with increased temperature calculated by the ideal adsorbed solution theory. With an increase in temperature from 298 to 313 K, the selectivity of CO₂ rises from 350.3 to 909.5 at zero coverage, which is unprecedented till date. Moreover, 1' behaves as a bifunctional heterogeneous catalyst through Lewis acid (open metal) and Brönsted acid sites to facilitate the chemical fixation of CO₂ to cyclic carbonates under ambient conditions. The high selectivity for CO₂ by 1' even at higher temperature was further corroborated with configurational bias Monte Carlo molecular simulation that ascertains the multiple CO₂-philic sites and epoxide binding sites in 1' to further decipher the mechanistic pathway.

Pyridinium-Functionalized Ionic Metal-Organic Frameworks Designed as Bifunctional Catalysts for CO2 Fixation into Cyclic Carbonates

Ionic metal-organic frameworks (MOFs) offer a new platform to design and construct complete heterogeneous bifunctional catalytic systems for the chemical fixation of CO₂ with epoxides. Herein, we developed a series of bifunctional pyridinium ionic MOF heterogeneous catalysts (66Pym-RXs and 67BPym-MeI) by the postsynthetic N-alkylation of noncoordinated pyridine sites in porous MOFs. The synergetic catalytic effect of acidic sites with nucleophilic anions in the ionic MOF significantly enhanced the catalytic activity toward the cycloaddition of CO₂ with epoxides to produce cyclic carbonates under cocatalyst-free and solvent-free mild conditions. The catalytic activity of ionic MOFs is easily tuned by the introduction of different alkyl groups into pyridinium cations and halide ions. The 66Pym-iPrI catalyst displayed the highest catalytic performance in terms of the turnover number value for the synthesis of cyclic carbonates. The proposed alternative method provides the means of developing functional N-heterocyclic groups for the new design of bifunctional ionic MOFs as potential heterogeneous catalysts for CO₂ fixation applications.

A review on production of metal organic frameworks (MOF) for CO2 adsorption

The environment sustenance and preservation of global climate are known as the crucial issues of the world today. Currently, the crisis of global warming due to CO₂ emission has turned into a paramount concern. To address such a concern, diverse CO₂ capture and sequestration techniques (CCS) have been introduced so far. In line with this, Metal Organic Frameworks (MOFs) have been considered as the newest and most promising material for CO₂ adsorption and separation. Due to their outstanding properties, this new class of porous materials a have exhibited a conspicuous potential for gas separation technologies especially for CO₂ storage and separation. Thus, the present review paper is aimed to discuss the adsorption properties of CO₂ on the MOFs based on the adsorption mechanisms and the design of the MOF structures. In addition, the main challenge associated with using this prominent porous material has been mentioned.

The chemistry of Ce-based metal-organic frameworks

Metal-organic frameworks (MOFs) have gained widespread attention due to their modular construction that allows the tuning of their properties. Within this vast class of compounds, metal carboxylates containing tri- and tetravalent metal ions have been in the focus of many studies due to their often high thermal and chemical stabilities. Cerium has a rich chemistry, which depends strongly on its oxidation state. Ce(iii) exhibits properties typically observed for rare earth elements, while Ce(iv) is mostly known for its oxidation behaviour. In MOF chemistry this is reflected in their unique optical and catalytic properties. The synthetic parameters for Ce(iii)- and Ce(iv)-MOFs also differ substantially and conditions must be chosen to prevent reduction of Ce(iv) for the formation of the latter. Ce(iii)-MOFs are usually reported in comprehensive studies together with those constructed with other RE elements and normally they are isostructural. They exhibit a greater structural diversity, which is reflected in the larger variety of inorganic building units. In contrast, the synthesis conditions of Ce(iv)-MOFs were only recently (2015) established. These lead selectively to hexanuclear Ce-O clusters that are well-known for Zr-MOFs and therefore very similar structural and isoreticluar chemistry is found. Hence Ce(iv)-MOFs exhibit often high porosity, while only a few porous Ce(iii)-MOFs have been described. Some of these show structural flexibility which makes them interesting for separation processes. For Ce(iv)-MOFs the redox properties are most relevant. Thus, they are intensively discussed for catalytic, photocatalytic and sensing applications. In this perspective, the synthesis, structural chemistry and properties of Ce-MOFs are summarized.

Efficient Lithium Growth Control from Ordered Nitrogen-Chelated Lithium-Ion for High Performance Lithium Metal Batteries

Lithium (Li) metal has attracted significant attention as next-generation anode material owing to its high theoretical specific capacity and low potential. For enabling the practical application of Li-metal as an anode according to energy demands, suppressing dendrite growth by controlling the Li-ion (Li+) is crucial. In this study, metal-organic frameworks comprising bipyridinic nitrogen linker (M-bpyN) are proposed as 3-dimensional (3D) Li guiding matrix. The proposed approach creates ordered electronegative functional sites that enable the preoccupied Li+ in the ordered bipyridine sites to produce isotropic Li growth. The Li guiding matrix containing 3D ordered bipyridinic N sites introduces preoccupied Li+ sites that attract the Li growth direction, thereby suppressing the dendrite growth during the electrodeposition of Li. After applying the M-bpyN layers, stable lifespan of up to 900 cycles in the Li|M-bpyN|Cu cell and over 1500 h of operation in the Li|M-bpyN|Li symmetric cell is achieved. Moreover, the Li|M-bpyN|LiFePO4 configuration shows a long cycle retention of 350 cycles at 0.5 C. These results indicate that an M-bpyN Li guiding matrix, which enables a uniform Li+ flux by 3D ordered Li+-chelating sites, serve as a suitable host for Li+ and enhance the performance of Li-metal electrodes.

A point-of-care diagnostics logic detector based on glucose oxidase immobilized lanthanide functionalized metal-organic frameworks

In this work, a novel lanthanide functionalized metal organic framework enzyme (L-MOF-enzyme) composite has been first prepared via a surface attachment strategy between Eu³⁺@UMOF and glucose oxidase (GOx). Here, the Eu³⁺@UMOF can be used as a support for GOx immobilization and also a responsive fluorescent center towards glucose (Glu). The resulting material not only exhibits fascinating luminescence properties based on the ⁵D₀→⁷F₂ transition of Eu³⁺ and the catalytic performance of enzymes, but also some advantages of MOF-enzyme composites, including better stability, and great fluorescence selectivity and sensitivity towards Glu (detection limit = 0.2 μM). Besides, the composite exhibited an excellent selectivity and sensitivity towards Glu in serum and urine under room temperature and neutral conditions, which breaks the limitation of specific catalytic conditions of enzymes. Taking all the advantages of the L-MOF-enzyme composite, a point-of care (POC) diagnostics logic detector which can be used for the fluorescence detection of Glu in urine is designed. From the three outputs of the logic detector (L, M and H), we can intuitively realize the self-diagnosis of the three ranges of Glu concentrations that act as the inputs of the detector (0.1 μM-10 μM, 10 μM-10 mM, >10 mM) by the naked eye. The logic detector allows us, especially diabetics, to instantly detect glucose levels in the urine without going to the hospital for complicated inspections. This is the first attempt using L-MOFs combined with GOx to construct a POC diagnostics logic detector for fluorescence detection of Glu.

Titanium(IV)-functionalized zirconium-organic frameworks as dual-metal affinity probe for recognition of endogenous phosphopeptides prior to mass spectrometric quantification

A zirconium-organic framework was modified with titanium(IV) ions to obtain a modified framework that is shown to be a viable sorbent for selective capture of phosphopeptides. This dual-metal affinity probe exhibits 0.1 fM limits of detection and excellent size-exclusion effect (the mass ratio of β-casein digests/BSA/intact β-casein is 1:1000:1000). This is attributed to abundant Ti(IV) and Zr(IV) coordination sites and high porosity. The performance of the sorbent for extracting endogenous phosphopeptides from human serum and saliva was investigated. Especially, 105 endogenous phosphopeptides from saliva were captured specifically. In addition, the amino acid frequency of the enriched phosphopeptides was analyzed. Conservation of sequence around the identified phosphorylated sites from saliva confirmed that phosphorylation took place in the proline-directed motifs. Graphical abstractSchematic representation of a method for the specific enrichment of phosphopeptides by a modified metal-organic framework. Following size-exclusion elution, the phosphopeptides are quantified by mass spectrometry.

Multi-component luminescence responsive Eu3+/Tb3+ hybrids based with metal-organic frameworks and zeolites A

Both Zeolite A (ZA) and two kinds of 2,2'-bipyridine-5,5'-dicarboxylic acid (H₂bpydc) linking meta-organic frameworks (MOFs) (MOF-253 (Al(OH)(bpydc)) and UiO-67 ([Zr₆O₄(OH)₄(bpydc)₆])) have been used to construct novel photofunctional multi-component lanthanide hybrid materials through covalent-coordination cooperative assembly. Microporous ZA is firstly functionalized by covalently grafting of the surface hydroxyl groups using special silane crosslinking reagent 3-methacryloxypropyltrimethoxysilane (MPTMS). Then the multi-component assembly are realized by coordination interaction between lanthanide ions (Eu³⁺/Tb³⁺), ZA through the carbonyl group of MPTMS unit and MOF-253 (or UiO-67) through the double nitrogen of bpydc linker. Subsequently, the obtained multicomponent hybrid materials (ZA-MPTMS-Eu/Tb-MOF-253(UiO-67)) are characterized by means of XRD, FT-IR, SEM and especially the photoluminescence properties are studied in details. These hybrids with both ZA and MOFs host show the main characteristic crystal framework morphology of ZA together with the composition of MOFs. They display the feature luminescence of Eu³⁺/Tb³⁺ ions for the energy transfer from bpydc linker of MOFs. Furthermore, ZA-MPTMS-Eu-UiO-67 hybrid material is selected to check the luminescence response to volatile substances, whose luminescence quenching is found for ammonia vapor.

Implementing Metal-Organic Frameworks for Natural Gas Storage

Methane can be stored by metal-organic frameworks (MOFs). However, there remain challenges in the implementation of MOFs for adsorbed natural gas (ANG) systems. These challenges include thermal management, storage capacity losses due to MOF packing and densification, and natural gas impurities. In this review, we discuss discoveries about how MOFs can be designed to address these three challenges. For example, Fe(bdp) (bdp2− = 1,4-benzenedipyrazolate) was discovered to have intrinsic thermal management and released 41% less heat than HKUST-1 (HKUST = Hong Kong University of Science and Technology) during adsorption. Monolithic HKUST-1 was discovered to have a working capacity 259 cm3 (STP) cm−3 (STP = standard temperature and pressure equivalent volume of methane per volume of the adsorbent material: T = 273.15 K, P = 101.325 kPa), which is a 50% improvement over any other previously reported experimental value and virtually matches the 2012 Department of Energy (Department of Energy = DOE) target of 263 cm3 (STP) cm−3 after successful packing and densification. In the case of natural gas impurities, higher hydrocarbons and other molecules may poison or block active sites in MOFs, resulting in up to a 50% reduction of the deliverable energy. This reduction can be mitigated by pore engineering.

Symmetry-guided syntheses of mixed-linker Zr metal-organic frameworks with precise linker locations

Symmetry-guided linker insertion produces an fcu Zr-MOF with both linkers of different symmetries placed at well-defined locations in the framework.

While the one-pot reaction of zirconium metal ions with a mixture of two dicarboxylate heterolinkers yielded a 12-c fcu Zr MOF with randomly distributed linkers, the symmetry-guided stepwise reaction produced the same MOF with both linkers precisely located in the framework. In the latter method, linear terephthalic acid (H₂BDC) derivatives with mmm symmetry were inserted into the mmm-symmetry sites of the flexible Zr MOF with 8-c bcu topology (ZRN-bcu), which is composed of zigzag 2,6-naphthalenedicarboxylic acid with 2/m symmetry. Although the length of the symmetry-matching BDC^2– derivatives was much shorter than the distance between the unlinked nearest-neighbor Zr clusters in ZRN-bcu, induced fitting of the derivatives into the framework was possible, resulting in well-defined locations for the two different dicarboxylate linkers. Thus, controlled synthesis of MOFs with the desired topology and functionality can be achieved using a symmetry-guided approach.