Hydrothermal synthesis and photocatalytic application of ZnS-Ag composites based on biomass-derived carbon aerogel for the visible light degradation of methylene blue

A facile and cost-effective hydrothermal followed by precipitation method is employed to synthesize visible light-driven ZnS-Ag ternary composites supported on carbon aerogel (CA). Extensive studies were conducted on the structural, morphological, and optical properties, confirming the successful formation of ternary nanocomposites. The obtained results evidently demonstrate the successful loading of ZnS and Ag onto the surface of the CA. High-resolution transmission electron microscopy analysis revealed that ZnS and Ag nanoparticles (AgNPs) were uniformly distributed on the surface of the CA with an average diameter of 18 nm. The biomass-derived CA, containing a hierarchical porous nano-architecture and an abundant number of -NH2 functional groups on the surface, can greatly prevent the agglomeration, stability and reduce particle size. Brunauer-Emmett-Teller analysis results indicated specific surface areas of 4.62 m2 g-1 for the CA, 48.50 m2 g-1 for the CA/ZnS composite, and 62.62 m2 g-1 for the CA/ZnS-Ag composite. These values demonstrate an increase in surface area upon the incorporation of ZnS and Ag into the CA matrix. Under visible light irradiation, the synthesized CA/ZnS-Ag composites displayed remarkably improved photodegradation efficiency of methylene blue (MB). Among the tested samples, the CA/ZnS-Ag composites exhibited the highest percentage of photodegradation efficiency, surpassing ZnS, CA, and CA/ZnS. The obtained percentages of degradation efficiency for CA, ZnS, CA/ZnS, and CA/ZnS-Ag composites were determined as 26.60%, 52.12%, 68.39%, and 98.64%, respectively. These results highlight the superior photocatalytic performance of the CA/ZnS-Ag composites in the degradation of MB under visible light conditions. The superior efficiency of the CA/ZnS-Ag composite can be attributed to multiple factors, including its elevated specific surface area, inhibition of electron-hole pair recombination, and enhanced photon absorption within the visible light spectrum. The CA/ZnS-Ag composites displayed consistent efficiency over multiple cycles, confirming their stable performance, reusability, and enduring durability, thereby showcasing the robust nature of this composite material.

Metal sulphides and their heterojunctions for photocatalytic degradation of organic dyes-A comprehensive review

Water pollution caused by organic dyes is one of the greatest threats to the ecosystem. The removal of dyes from water has remained a challenge for scientists. Recently, metal sulphides have emerged as a potential candidate for water remediation applications. The efficient charge transportation, greater surface-active sites, and low bandgap of metal sulphides make them an excellent choice of semiconductor photocatalysts for degradation of dyes. This review summarises the potential application of metal sulphides and their heterojunctions for the photocatalytic degradation of organic dyes from wastewater. A detailed study has been presented on the synthesis, basics of photodegradation and heterojunctions and photocatalytic activity. The effect of the use of templates, doping agents, synthesis route, and various other factors affecting the photocatalytic activity of metal sulphides have been summarised in this review. The synthesis techniques, characterisation techniques, mechanism of degradation of organic dyes by Z-scheme heterojunction photocatalyst, reusability and stability of metal sulphides, and the scope of future research are also discussed. This study indicates that Scopus-based core gathered data could be used to give an objective overview of the global dye degradation research from 2008 to 2023 (15 years). All data (articles, authors, keywords, and publications) is compiled in the Scopus database. For the bibliometric study, 1962 papers relevant to dye photodegradation by sulfide-based photocatalysts were found, and this number rises yearly. A bibliometric analysis provides a 15-year evaluation of the state-of-the-art research on the impact of metal sulfide-based photocatalysts on the photodegradation of dyes.

Synthesis of Solar Light Active Reduced Graphene Oxide-ZnS Nanomaterial for Photocatalytic Degradation and Antibacterial Applications

Good water quality is essential for life; therefore, decolorizing and detoxifying organic dye wastes (textile effluents) have gained immense environmental importance in recent years. Thus, the degradation of wastewater has become a potential need for our environment. This research aims to synthesize and investigate a ceramic-based nanomaterial catalyst for the degradation of dye solution under exposure to sunlight. A reduced graphene oxide-ZnS (rGO-ZnS) nanomaterial was qualitatively synthesized using a solvothermal method. The prepared nanomaterial was characterized using XRD, SEM, HR-TEM, EDX, XPS, and FT-IR techniques. The photocatalytic activity of the rGO-ZnS nanomaterial was checked using oxidative photocatalytic degradation of naphthol blue black dye (NBB) under direct sunlight irradiation. Here, the rGO/ZnS composite showed a significant photocatalytic performance to degraded NBB (93.7%) under direct solar light. Chemical Oxygen Demand (COD) measurements confirmed the mineralization of the dye. The influence of different radical scavengers on NBB degradation was studied. Optimum conditions for efficient degradation were determined. The antibacterial property of the prepared catalyst was studied.

Investigation on the role of graphene-based composites for in photocatalytic degradation of phenol-based compounds in wastewater: a review

The ineptitude of conventional water management systems to eradicate noxious compounds leads to the development of advanced treatment systems. The disclosure of graphene-based photocatalytic degradation for the eradication of phenolic compounds has become the "apple of the eye" for many researchers. This review article describes the advanced research progress during the period of 2008-2021 in graphene-based nanocomposites and discusses their different synthesis methods. We will also talk about the applications of nanocomposite in water splitting, dye degradation, solar fuel generations, and organic transformations. Multicomponent heterojunction structure, co-catalyst cohering, and noble metal coupling have been inspected to enhance the photocatalytic performance of graphene-based composite by increasing charge separation and stability. The photocatalytic system's remarkable stability has been described in terms of facile recyclability. The adsorption ability of phenolic compounds has been addressed in the form of Langmuir and Freundlich adsorption isotherm with various factors (pH, concentration, the intensity of light, the effect of catalyst, the effect of time, etc.). The purpose of this review is to survey mechanisms and processes that enlist graphene-based composite in terms of efficacy and dose of catalyst required to attain 99% degradation. Nanoparticles may cause toxicity and a pretext for their toxicity has been mentioned. Finally, it is anticipated that this article could allocate consequential knowledge to fabricating graphene-based composites that are in crucial demand of being discussed in future research.

Review elucidating graphene derivatives (GO/rGO) supported metal sulfides based hybrid nanocomposites for efficient photocatalytic dye degradation

Photocatalysis by utilizing semiconductors for the removal of toxic pollutants has gained tremendous interest for remediation purposes. The organic pollutants usually include; pesticides, dyes and other phenolic compounds. An imperative restraint associated with the photocatalytic effectiveness of the catalyst is the rapid recombination of the light generated electrons and holes. The particle agglomeration and electron-hole recombination hinders the rate of pollutant removal. For decades, researchers have used metal-sulfides efficiently for photocatalytic dye degradation. The recent use of hybrid nanomaterials with the combination of graphene derivatives such as graphene oxide and reduced graphene oxide (GO/rGO)-metal sulfide has gained interest. These composites have displayed an impressive upsurge in the photocatalytic activity of materials. The current review describes the various researches on dye photodegradation by employing (GO/rGO)-metal sulfide, exhibiting a boosted potential for photocatalytic dye degradation. A comprehensive study on (CuS, ZnS and CdS)–GO/rGO hybrid composites have been discussed in detail for effective photocatalytic dye degradation in this review. Astonishingly improved dye degradation rates were observed in all these studies employing such hybrid composites. The several studies described in the review highlighted the varying degradation rates based on diverse research parameters and efficacy of graphene derivatives for enhancement of photocatalytic activity.

Effect of electron-phonon interaction and valence band edge shift for carrier-type reversal in layered ZnS/rGO nanocomposites

The artificial stacking of nanohybrid films helps to enhance their properties and thus intrigues researchers to explore this possibility in emerging technologies. The layer-by-layer approach was used to fabricate samples of zinc sulfide/reduced graphene oxide (ZnS/rGO) by using spin coating technique. The structure and optoelectronic properties has been extensively studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-VIS-NIR spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and Hall measurements. Raman spectrum elucidates the phonon contribution of ZnS and breathing mode of κ-point phonons and sp² bonds of carbon atoms of rGO. The electron-phonon interactions reveal reduction in electron mobility and enhancement in holes contribution with rGO content leading to surface charge transfer doping (SCTD). XPS results explain the valence band edge and conduction band edge to form type-I band alignment to reconfirm carrier-type reversal. A change in the dispersion of refractive indices along with a small rise in the value of absorption coefficient in terahertz (THz) region for ZnS/rGO nanocomposite films has been observed. These results will open up new opportunities to furthering the science of this technologically important class of materials for future electronics.

Efficient visible light-driven core–shell-structured ZnS@Ag2S nanoparticles-anchored reduced graphene oxide for the reduction of Cr(vi)

Synthesis of a ZnS@Ag₂S/RGO nanocomposite with high photocatalytic performance for the removal of Cr(vi) based on the photo-induced interfacial charge transfer.

A water-stable La-MOF with high fluorescence sensing and supercapacitive performances

A 3D lanthanide coordination polymer {[La(SIP)(H₂O)₃]·H₂O}_n (La-MOF) was synthesized successfully by the solvothermal reaction of La(NO₃)₃·6H₂O and 5-sulfoisophthalic acid monosodium salt (NaH₂SIP). In particular, two oxygen atoms of sulfate participate in the coordination, which is unusual in all the complexes. La-MOF was characterized by single-crystal X-ray diffraction, IR spectroscopy, powder X-ray diffraction, thermal-gravimetric analysis, and X-ray photoelectron spectroscopy. La-MOF shows excellent water stability and chemical stability in a broad pH range from 2 to 13. Moreover, the fluorescence and sensing properties of La-MOF were invsetigated in detail via its titration and cycling processes, revealing its highly efficient and selective quenching responses and good recyclability for the detection of Fe³⁺, Cr₂O₇^2- and CrO₄^2- ions. In addition, La-MOF possesses an outstanding specific capacitance of 213 F g^-1 at 0.5 A g^-1. It still retains 92% of the original capacitance after 2000 cycles, exhibiting remarkable long-term cycling stability and reversibility; therefore, the electrode material based on La-MOF is a competitive and promising candidate for application in supercapacitors.

A Facile Method to Synthesize CdSe-Reduced Graphene Oxide Composite with Good Dispersion and High Nonlinear Optical Properties

CdSe-reduced graphene oxide (CdSe/RGO) composites were synthesized by a hydrothermal method. CdSe/RGO composites with different mass ratios were prepared. The structure and morphology of CdSe/RGO composites were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The synthesis of CdSe/RGO complexes was successfully demonstrated by Fourier infrared (FT-IR) and Raman spectra. CdSe nanoparticles in the CdSe/RGO composite were uniformly dispersed on the graphene surface. The study found that oxygen-containing functional groups such as hydroxyl (-OH) and carboxyl (-COOH) groups in graphene played a decisive role in the dispersion of CdSe. The third-order nonlinear optical properties of CdSe/RGO composites were measured by a single beam Z-scan technique. The experimental results showed that composites exhibited two-photon absorption and self-focusing nonlinear refraction properties. Additionally, the third-order nonlinear susceptibility of the composite material was obviously enhanced, which was mainly due to the good dispersion of CdSe nanoparticles on graphene.

A ZnS nanocrystal/reduced graphene oxide composite anode with enhanced electrochemical performances for lithium-ion batteries

A simple route for the preparation of ZnS nanocrystal/reduced graphene oxide (ZnS/RGO) by a hydrothermal synthesis process was achieved. The chemical composition, morphology, and structural characterization reveal that the ZnS/RGO composite is composed of sphalerite-phased ZnS nanocrystals uniformly dispersed on functional RGO sheets with a high specific surface area. The ZnS/RGO composite was utilized as an anode in the construction of a high-performance lithium-ion battery. The ZnS/RGO composite with appropriate RGO content exhibits a high reversible specific capacity (780 mA h g^-1), excellent cycle stability over 100 cycles (71.3% retention), and good rate performance at 2C (51.2% of its capacity when measured at a 0.1C rate). To further investigate this ZnS/RGO anode for practical use in full Li-ion cells, we tested the electrochemical performance of the ZnS/RGO anode at different cut-off voltages for the first time. The presence of RGO plays an important role in providing high conductivity as well as a substrate with a high surface area. This helps alleviate the typically problems associated with volume expansion and shrinkage during prolonged cycling. Additionally, the RGO provides multiple nucleation points that result in a uniformly dispersed film of nanosized ZnS that covers its surface. Thus, the high surface area RGO enables high electronic conductivity and fast charge transfer kinetics for ZnS lithiation/delithiation.

Controllable synthesis and enhanced gas sensing properties of a single-crystalline WO3–rGO porous nanocomposite

A single-crystalline WO₃–rGO composite has been successfully prepared and applied into gas detection. Impressively, this permit-3D porous nanostructures display enhanced NO₂ sensing properties.

Facile preparation of 2D Bi2MoO6 nanosheets–RGO composites with enhanced photocatalytic activity

To the best of our knowledge, few studies had reported Bi₂MoO₆–RGO as a catalyst for photodegradation of ciprofloxacin.

Well-wrapped reduced graphene oxide nanosheets on Nb3O7(OH) nanostructures as good electron collectors and transporters for efficient photocatalytic degradation of rhodamine B and phenol

Nb₃O₇(OH) nanorod-reduced graphene oxide nanocomposites with superior photocatalytic efficiency for degradation of organic dyes have been synthesized and characterized.

Stabilization of ZnS nanoparticles by polymeric matrices: syntheses, optical properties and recent applications

ZnS nanocomposites is a promising area of research for designing novel functional hybrid materials due to their unique optical and electronic properties. This review emphasizes on the synthesis, optical studies and potential applications.

Raspberrylike SiO2@reduced graphene oxide@AgNP composite microspheres with high aqueous dispersity and excellent catalytic activity

The hybridizations of functional microspheres with graphene or graphene oxide (GO) sheets often suffer from severe agglomeration behaviors, leading to poor water dispersity of the resultant composite materials. Here, we first demonstrate that the sonication-assisted self-assembly of tiny GO sheets (whose lateral size less than 200 nm) on microspheric substrates like cationic polyelectrolyte-modified SiO2 microspheres could effectively overcome such a common drawback. On the basis of this facile strategy, we further developed reduced graphene oxide/silver nanoparticle composite film wrapped SiO2 microspheres, which not only possessed unique raspberrylike structure and high aqueous dispersity but also exhibited exceptional catalytic activity toward the reduction of 4-nitrophenol.

Sonochemical synthesis of reduced graphene oxide uniformly decorated with hierarchical ZnS nanospheres and its enhanced photocatalytic activities

Reduced graphene oxide decorated with ZnS nanospheres was synthesized through the simple ultrasonic irradiation route which shows a significant enhancement in the photocatalytic degradation of methylene blue compared to the bare ZnS particles.

Heterostructured nanocomposite tin phthalocyanine@mesoporous ceria (SnPc@CeO2) for photoreduction of CO2 in visible light

Heterostructured tin phthalocyanine supported to mesoporous ceria was synthesized and used a photocatalyst for CO₂ reduction under visible light.

Novel synthesis of silver/reduced graphene oxide nanocomposite and its high catalytic activity towards hydrogenation of 4-nitrophenol

Ag/RGO nanocomposites were prepared via reducing AgNO₃ in a macroscopic RGO aerogel directly through a convenient impregnation process, which exhibited high activity in the catalytic hydrogenation of 4-nitrophenol.

Facile synthesis and photocatalytic properties of ZnO core/ZnS–CdS solid solution shell nanorods grown vertically on reductive graphene oxide

The synthesis of ZnO core/Zn_xCd_1−xS shell nanorods grown vertically on RGO sheets and the important role played by Zn_xCd_1−xS on photocatalytic activity are described.

Highly enhanced photocatalytic properties of ZnS nanowires–graphene nanocomposites

ZnS–graphene nanocomposites exhibit excellent photocatalytic activity for degradation of methylene blue under UV light irradiation.

La2Ti2O7 nanoplates decorated with Cu2ZnSnS4 nanoparticles for enhanced visible-light-driven photocatalytic activity

Novel Cu₂ZnSnS₄/La₂Ti₂O₇ hetero-junction photocatalysts with high visible-light-driven photocatalytic activities were achieved by a green process.