Copper Modulated Lead-Free Cs4 MnSb2 Cl12 Double Perovskite Microcrystals for Photocatalytic Reduction of CO2

In order to deal with the global energy crisis and environmental problems, reducing carbon dioxide through artificial photosynthesis has become a hot topic. Lead halide perovskite is attracted people's attention because of its excellent photoelectric properties, but the toxicity and long-term instability prompt people to search for new photocatalysts. Herein, a series of <111> inorganic double perovskites Cs4 Mn1-x Cux Sb2 Cl12 microcrystals (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) are synthesized and characterized. Among them, Cs4 Mn0.7 Cu0.3 Sb2 Cl12 microcrystals have the best photocatalytic performance, and the yields of CO and CH4 are 503.86 and 68.35 µmol g-1 , respectively, after 3 h irradiation, which are the highest among pure phase perovskites reported so far. In addition, in situ Fourier transform infrared (FT-IR) spectroscopy and electron spin resonance (ESR) spectroscopy are used to explore the mechanism of the photocatalytic reaction. The results highlight the potential of this class of materials for photocatalytic reduction reactions.

Elucidating the mechanism of photocatalytic reduction of bicarbonate (aqueous CO2) into formate and other organics

The photocatalytic reduction of CO2 under solar irradiation is an ideal approach to mitigating global warming, and reducing aqueous forms of CO2 that interact strongly with a catalyst (e.g., HCO3-) is a promising strategy to expedite such reductions. This study uses Pt-deposited graphene oxide dots as a model photocatalyst to elucidate the mechanism of HCO3- reduction. The photocatalyst steadily catalyzes the reduction of an HCO3- solution (at pH = 9) containing an electron donor under 1-sun illumination over a period of 60 h to produce H2 and organic compounds (formate, methanol, and acetate). H2 is derived from solution-contained H2O, which undergoes photocatalytic cleavage to produce •H atoms. Isotopic analysis reveals that all of the organics formed via interactions between HCO3- and •H. This study proposes mechanistic steps, which are governed by the reacting behavior of the •H, to correlate the electron transfer steps and product formation of this photocatalysis. This photocatalysis achieves overall apparent quantum efficiency of 27% in the formation of reaction products under monochromatic irradiation at 420 nm. This study demonstrates the effectiveness of aqueous-phase photocatalysis in converting aqueous CO2 into valuable chemicals and the importance of H2O-derived •H in governing the product selectivity and formation kinetics.

Enhanced photocatalytic activity and mechanism insight of copper-modulated lead-free Cs2AgSbCl6 double perovskite microcrystals

Lead halide perovskites are prospective candidates for CO₂ photoconversion. Herein, we report copper-doped lead-free Cs₂AgSbCl₆ double perovskite microcrystals (MCs) for gas-solid phase photocatalytic CO₂ reduction. The 0.2Cu@Cs₂AgSbCl₆ double perovskite MCs display unprecedented CO₂ photoreduction capability with CO and CH₄ yields of 412 and 128 μmol g^-1, respectively. The ultrafast transient absorption spectroscopy reveals the enhanced separation of photoexcited carriers in copper-doped Cs₂AgSbCl₆ MCs. The active sites and reaction intermediates on the surface of the doped Cs₂AgSbCl₆ are dynamically monitored and precisely unraveled based on the in-situ Fourier transform infrared spectroscopy investigation. In combination with density functional theory calculations, it is revealed that the copper-doped Cs₂AgSbCl₆ MCs facilitate sturdy CO₂ adsorption and activation and strikingly enhance the photocatalytic performance. This work offers an in-depth interpretation of the photocatalytic mechanism of Cs₂AgSbCl₆ doped with copper, which may provide guidance for future design of high-performance photocatalysts for solar fuel production.

Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor

Morphine (MORPH) is natural alkaloid and mainly used as a pain reliever. Its monitoring in human body fluids is crucial for modern medicine. In this paper, we have developed an electrochemical sensor for submicromolar detection of MORPH. The sensor is based on modified carbon paste electrode (CPE) by investigating the Fe_xW_1-xO₄ ratio in iron tungstate (FeWO₄), as well as the ratio of this material in CPE. For the first time, the effect of the iron-tungsten ratio in terms of achieving the best possible electrochemical characteristics for the detection of an important molecule for humans was examined. Morphological and electrochemical characteristics of materials were studied. The best results were obtained using Fe₁W₃ and 7.5% of modifier in CPE. For MORPH detection, square wave voltammetry (SWV) was optimized. Under the optimized conditions, Fe₁W₃@CPE resulted in limit of detection (LOD) of the method of 0.58 µM and limit of quantification (LOQ) of 1.94 µM. The linear operating range between 5 and 85 µM of MORPH in the Britton-Robinson buffer solution (BRBS) at pH 8 as supporting electrolyte was obtained. The Fe₁W₃@CPE sensor resulted in good selectivity and excellent repeatability with relative standard deviation (RSD) and was applied in real-world samples of human urine. Application for direct MORPH detection, without tedious sample pretreatment procedures, suggests that developed electrochemical sensor has appeared to be a suitable competitor for efficient, precise, and accurate monitoring of the MORPH in biological fluids.

Influence of High Energy Ball Milling and Dispersant on Capacitive Properties of Fe2O3—Carbon Nanotube Composites

This investigation is motivated by increasing interest in ferrimagnetic materials and composites, which exhibit electrical capacitance. It addresses the need for the development of magnetic materials with enhanced capacitive properties and low electrical resistance. γ-Fe2O3-multiwalled carbon nanotube (MWCNT) composites are developed by colloidal processing and studied for energy storage in negative electrodes of supercapacitors. High energy ball milling (HEBM) of ferrimagnetic γ-Fe2O3 nanoparticles results in enhanced capacitive properties. The effect of HEBM on particle morphology is analyzed. Gallocyanine is used as a co-dispersant for γ-Fe2O3 and MWCNTs. The polyaromatic structure and catechol ligand of gallocyanine facilitated its adsorption on γ-Fe2O3 and MWCNTs, respectively, and facilitated their electrostatic dispersion and mixing. The adsorption mechanisms are discussed. The highest capacitance of 1.53 F·cm−2 is achieved in 0.5 M Na2SO4 electrolyte for composites, containing γ-Fe2O3, which is high energy ball milled and co-dispersed with MWCNTs using gallocyanine. HEBM and colloidal processing strategies allow high capacitance at low electrical resistance, which facilitates efficient charge–discharge. Obtained composites are promising for fabrication of multifunctional devices based on mutual interaction of ferrimagnetic and capacitive properties.

A novel route to the synthesis of α-Fe2O3@C@SiO2/TiO2 nanocomposite from the metal-organic framework as a photocatalyst for water treatment

In this study, an attempt was made to synthesize metal-organic frameworks (MOFs) based magnetic iron particles as photocatalysts for textile dye wastewater. Improvement strategy was a novel two-step dry method without using conventional methods to eliminate the consumption of chemical reagents. First, the heterogeneous photocatalyst of Fe-MOFs derived magnetic carbon nanocomposite with carboxylic acid surface functional groups (Fe@C-COOH) was achieved. Next, the α-Fe₂O₃@C@SiO₂/TiO₂ was successfully synthesized followed by a sol-gel method to coat the SiO₂ shell and a solvothermal method to coat the surface of the intermediate TiO₂ particles. The as-synthesized nanocomposite materials were characterized and physicochemical analytical equipment. Further, the investigation on magnetic photocatalytic nanocomposite α-Fe₂O₃@C@SiO₂/TiO₂ performance of dye degradation and photocatalytic activity on Reactive yellow 145 (RY145), using as an indicator was conducted. The as-synthesized nanocomposite particles were characterized using X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), X-ray energy dispersive spectroscopy (EDX), and scanning electron microscopy (SEM) techniques. The structural characterization of the as-synthesized materials proved that these methods generate oxygen-containing functional groups, such as, -OH, -CO, and -COOH, which increases the polarity and hydrophilicity of the photocatalyst. The photocatalytic oxidation of RY145 dye under UVc light was discussed by the apparent first-order reaction rate and the kinetic model of the Langmuir-Hinshelwood followed a better fitting. The optimal performance of the composite is at pH = 2, 15 mg/100 mL of photocatalyst dose, 150 mg/L concentration of the dye RY145 at 25 °C temperature under UVc lamp irradiation for 90 min, and with the apparent reaction rate constant was 0.0165 min^-1. The thermodynamic analysis of activation parameters computed by the Eyring model and based on transition state theory (TST), an endothermic reaction with a positive value for Δ^‡H^o (50.16 kJ mol^-1) and a negative value for Δ^‡S^o (-153 J/mol K) both contribute toward achieving positive values for Δ^‡G^o and a nonspontaneous process. The proposed α-Fe₂O₃@C@SiO₂/TiO₂ demonstrated a high capability of photocatalytic degradation up to 97% after five successive cycles at the optimal condition compared to that of Fe₃O₄@C (18.74%) and Fe@C-COOH (77.9%) without reusability.

What are the inorganic nanozymes? Artificial or inorganic enzymes!

The research on inorganic nanozymes remains very active since the first paper on the “intrinsic peroxidase-like properties of ferromagnetic nanoparticles” was published in Nature Nanotechnology in 2007. However, there is...

Alkali-Activation of Synthetic Aluminosilicate Glass With Basaltic Composition

Alkali-activated materials (AAMs) are a potential alternative to Portland cement because they can have high strength, good durability and low environmental impact. This paper reports on the structural and mechanical characteristics of aluminosilicate glass with basalt-like compositions, as a feedstock for AAMs. The alkali-activation kinetics, microstructure, and mechanical performance of the alkali activated glass were investigated. The results show that AAMs prepared from basalt glass have high compressive strength (reaching up to 90 MPa after 7 days of hydration) compared to those made using granulated blast furnace slag (GBFS). In addition, calorimetry data show that the hydrolysis of the developed glass and subsequent polymerization of the reaction product occur at a faster rate compared to GBFS. Furthermore, the obtained results show that the alkali activation of the developed glass formed sodium aluminosilicate hydrate (N-A-S-H) intermixed with Ca aluminosilicate hydrate gel (C-A-S-H), while the alkali activation of GBFS resulted in predominantly C-A-S-H gel. The developed glass can be formed from carbonate-free and abundant natural resources such as basalt rocks or mixtures of silicate minerals. Therefore, the glass reported herein has high potential as a new feedstock of AAMs.

CO2 Hydrogenation to Methane over Ni-Catalysts: The Effect of Support and Vanadia Promoting

Within the Waste2Fuel project, innovative, high-performance, and cost-effective fuel production methods are developed to target the “closed carbon cycle”. The catalysts supported on different metal oxides were characterized by XRD, XPS, Raman, UV-Vis, temperature-programmed techniques; then, they were tested in CO2 hydrogenation at 1 bar. Moreover, the V2O5 promotion was studied for Ni/Al2O3 catalyst. The precisely designed hydrotalcite-derived catalyst and vanadia-promoted Ni-catalysts deliver exceptional conversions for the studied processes, presenting high durability and selectivity, outperforming the best-known catalysts. The equilibrium conversion was reached at temperatures around 623 K, with the primary product of reaction CH4 (>97% CH4 yield). Although the Ni loading in hydrotalcite-derived NiWP is lower by more than 40%, compared to reference NiR catalyst and available commercial samples, the activity increases for this sample, reaching almost equilibrium values (GHSV = 1.2 × 104 h–1, 1 atm, and 293 K).

Xyloglucan-based hybrid nanocomposite with potential for biomedical applications

Natural polymer-based hybrid nanocomposites have been proposed as one of the most promising tools for biomedical applications, including disease treatment and diagnosis procedures. Xyloglucan nanocapsules can simultaneously load magnetic iron oxide nanoparticles and bioactive for a specific tissue, reducing the processes of degradation and metabolic inactivation of molecules with biological activity. In this work, magnetic nanocapsules of xyloglucan loaded with hydrophilic sulfated quercetin (MNXQ_SO₃) were successfully synthesized by inverse miniemulsion process through interfacial polymerization. The polymeric shell formation of nanocapsules was evidenced by Fourier Transform Infrared spectroscopy and Transmission Electron Microscopy. The ferrofluid (Fe₃O₄@PAAS) incorporated into the xyloglucan nanocapsules was synthesized by hydrothermal method, using polyacrylic acid sodium salt as coating. Dynamic Light Scattering technique confirmed the nanomeric dimensions (202.3 nm) and the good colloidal stability (-40.2 mV) of MNXQ_SO₃. The saturation magnetization analyses pointed out the superparamagnetic behavior of Fe₃O₄@PAAS (48 emu/g) and MNXQ_SO₃ (4.2 emu/g). MNXQ_SO₃ was able to modify the release profile of sulfated quercetin (67%) when compared to the free bioactive (100%), exhibiting a release profile compatible with the zero-order kinetic model. The results showed that the development of MNXQ_SO₃ presents a new perspective for biomedical applications, including studies of targeted drug delivery.

On the origin of the elusive first intermediate of CO2 electroreduction

We resolve the long-standing controversy about the first step of the CO₂ electroreduction to fuels in aqueous electrolytes by providing direct spectroscopic evidence that the first intermediate of the CO₂ conversion to formate on copper is a carboxylate anion *CO₂ ^- coordinated to the surface through one of its C-O bonds. We identify this intermediate and gain insight into its formation, its chemical and electronic properties, as well as its dependence on the electrode potential by taking advantage of a cutting-edge methodology that includes operando surface-enhanced Raman scattering (SERS) empowered by isotope exchange and electrochemical Stark effects, reaction kinetics (Tafel) analysis, and density functional theory (DFT) simulations. The SERS spectra are measured on an operating Cu surface. These results advance the mechanistic understanding of CO₂ electroreduction and its selectivity to carbon monoxide and formate.

Hydrolysis of Phosphate Esters Catalyzed by Inorganic Iron Oxide Nanoparticles Acting as Biocatalysts

Phosphorus ester hydrolysis is one of the key chemical processes in biological systems, including signaling, free-energy transaction, protein synthesis, and maintaining the integrity of genetic material. Hydrolysis of this otherwise kinetically stable phosphoester and/or phosphoanhydride bond is induced by enzymes such as purple acid phosphatase. Here, I report that, as in previously reported aged inorganic iron ion solutions, the iron oxide nanoparticles in the solution, which are trapped in a dialysis membrane tube filled with the various iron oxides, significantly promote the hydrolysis of the various phosphate esters, including the inorganic polyphosphates, with enzyme-like kinetics. This observation, along with those of recent studies of iron oxide, vanadium pentoxide, and molybdenum trioxide nanoparticles that behave as mimics of peroxidase, bromoperoxidase, and sulfite oxidase, respectively, indicates that the oxo-metal bond in the oxide nanoparticles is critical for the function of these corresponding natural metalloproteins. These inorganic biocatalysts challenge the traditional concept of replicator-first scenarios and support the metabolism-first hypothesis. As biocatalysts, these inorganic nanoparticles with enzyme-like activity may work in natural terrestrial environments and likely were at work in early Earth environments as well. They may have played an important role in the C, H, O, S, and P metabolic pathway with regard to the emergence and early evolution of life. Key Words: Enzyme-Hydrolysis-Iron oxide-Nanoparticles-Origin of life-Phosphate ester. Astrobiology 18, 294-310.

In situ XAS study of CoBi modified hematite photoanodes

Solar water splitting is a potentially scalable method to store solar energy in the form of renewable hydrogen gas. In this study, we demonstrate that the photoelectrochemical (PEC) performance of hematite photoanodes can be improved by modification with the oxygen evolution catalyst CoB_i. The current density at 1.23 V of the pristine hematite under one sun is 0.88 mA cm^-2 and it increases to 1.12 mA cm^-2 after CoB_i modification (∼27% improvement). The presence of a CoB_i cocatalayst layer is proposed to improve the oxygen evolution reaction (OER) kinetics and also to prevent electron-hole recombination at the surface via passivating surface defects as well as suppressing the tunneling of electrons from the hematite core, thus improving the photocurrents and resulting in a negative shift of photocurrent onset potentials. These effects of CoB_i modification are supported by experimental data obtained by performing electrochemical impedance spectroscopy (EIS), PEC and incident photon-to-current efficiency (IPCE) measurements. To investigate the electronic structure of the CoB_i cocatalyst deposited on hematite, XPS and in situ X-ray absorption spectroscopy (XAS) are employed. Co K-edge spectra at different potentials and light conditions are recorded. This makes the present work different from most of the previous studies. Using a quantitative analysis method, information on the mean oxidation state of Co in the CoB_i film under applied potential and illumination is revealed. We also compare different methods for determining the oxidation state from the edge position and find that the integral method and half height methods are most suitable. In summary, the present work underlines the improvement of the semiconductor/cocatalyst interface of oxygen evolving photoanodes and strengthens the importance of in situ XAS spectroscopy when studying catalysts. This study is the first report so far combining the studies of the PEC performance of a CoB_i modified hematite nanorod array photoanode and in situ XAS at the Co K-edge.

Carbon dioxide binding at dry FeOOH mineral surfaces: evidence for structure-controlled speciation

Interactions between CO2(g) and mineral surfaces are important to atmospheric and terrestrial settings. This study provides detailed evidence on how differences in mineral surface structure impact carbonate speciation resulting from CO2(g) adsorption reactions. It was achieved by resolving the identity of adsorption sites and geometries of (bi)carbonate species at surfaces of nanosized goethite (α-FeOOH) and lepidocrocite (γ-FeOOH) particles. Fourier transform infrared spectroscopy was used to obtain this information on particles contacted with atmospheres of CO2(g). Vibrational modes of surface hydroxo groups covering these particles were first monitored. These showed that only one type of the surface groups that are singly coordinated to Fe atoms (-OH) are involved in the formation of (bi)carbonate species. Those of higher coordination numbers (μ-OH, μ3-OH) do not participate. Adsorption geometries were then resolved by investigating the C-O stretching region, assisted by density functional theoretical calculations. These efforts provided indications leaning toward a predominance of monodentate mononuclear species, -O-CO2Hx=[0,1]. In contrast, monodentate binuclear species of (-O)2-COHx=[0,1], are expected to form at particle terminations and surface defects. Finally, calculations suggested that bicarbonate is the dominant species on goethite, while a mixture of bicarbonate and carbonate species is present on lepidocrocite, a result stemming from different hydrogen bonding patterns at these mineral surfaces.