Accounting for the Quantum Capacitance of Graphite in Constant Potential Molecular Dynamics Simulations

Molecular dynamics (MD) simulations at a constant electric potential are an essential tool to study electrochemical processes, providing microscopic information on the structural, thermodynamic, and dynamical properties. Despite the numerous advances in the simulation of electrodes, they fail to accurately represent the electronic structure of materials such as graphite. In this work, a simple parameterization method that allows to tune the metallicity of the electrode based on a quantum chemistry calculation of the density of states (DOS) is introduced. As a first illustration, the interface between graphite electrodes and two different liquid electrolytes, an aqueous solution of NaCl and a pure ionic liquid, at different applied potentials are studied. It is shown that the simulations reproduce qualitatively the experimentally-measured capacitance; in particular, they yield a minimum of capacitance at the point of zero charge (PZC), which is due to the quantum capacitance (QC) contribution. An analysis of the structure of the adsorbed liquids allows to understand why the ionic liquid displays a lower capacitance despite its large ionic concentration. In addition to its relevance for the important class of carbonaceous electrodes, this method can be applied to any electrode materials (e.g. 2D materials, conducting polymers, etc), thus enabling molecular simulation studies of complex electrochemical devices in the future.

Differential Capacitance of Ionic Liquid Confined between Metallic Interfaces

We present here a detailed analysis of the electric double layer at the gold electrode/[BMIM][BF4] interface using a polarizable model for the electrode, based on our recent approach to include image charges [Geada et al. Nat. Commun. 2018, 9, 716]. A double bell (camel) shape is obtained for the differential capacitance, where the inclusion of metal polarization allows for a higher density of ions in the double layer, particularly around the maxima, thereby increasing the capacitance. The charging mechanism differs for the positive and negative electrodes, with counterion adsorption prevailing at the anode and co-ion desorption prevailing at the cathode. The charging mechanism is predominantly governed by the BF4 anions, serving as counterions and co-ions at the anode and cathode, respectively. Within the considered range of potentials, only minor changes are observed in the dynamical properties, specifically in the diffusion coefficients. Notably, it is interesting to observe that bulk properties are restored at a shorter distance from the gold surface in the case of the anode compared to the cathode.

Molecular dynamics simulations of electrified interfaces including the metal polarisation

Understanding electrified interfaces requires an accurate description of the electric double layer which also takes into account the metal polarisation. Here we present a simple approach to the molecular dynamics simulation of electrified interfaces which combines fixed charges and a core-shell model for the description of the polarisable electron density on the metal electrode. The approach has been applied to the Au(111) surface in contact with a NaCl aqueous electrolyte solution in order to calculate the differential capacitance and to gain a detailed picture of the charging mechanism. Metal polarisation enhances the interfacial capacitance with a difference between the cathode and anode. In particular, we find that the influence of the metal polarisation on the electric double layer depends on the ion's solvation shell structure and, for the investigated interface, is more important at the cathode, where it modifies the sodium ion distribution.

Real-Space Charge Density Profiling of Electrode-Electrolyte Interfaces with Angstrom Depth Resolution

The accumulation and depletion of charges at electrode-electrolyte interfaces is crucial for all types of electrochemical processes. However, the spatial profile of such interfacial charges remains largely elusive. Here we develop charge profiling three-dimensional (3D) atomic force microscopy (CP-3D-AFM) to experimentally quantify the real-space charge distribution of the electrode surface and electric double layers (EDLs) with angstrom depth resolution. We first measure the 3D force maps at different electrode potentials using our recently developed electrochemical 3D-AFM. Through statistical analysis, peak deconvolution, and electrostatic calculations, we derive the depth profile of the local charge density. We perform such charge profiling for two types of emergent electrolytes, ionic liquids, and highly concentrated aqueous solutions, observe pronounced sub-nanometer charge variations, and find the integrated charge densities to agree with those derived from macroscopic electrochemical measurements.

Applying Classical, Ab Initio, and Machine-Learning Molecular Dynamics Simulations to the Liquid Electrolyte for Rechargeable Batteries

Rechargeable batteries have become indispensable implements in our daily life and are considered a promising technology to construct sustainable energy systems in the future. The liquid electrolyte is one of the most important parts of a battery and is extremely critical in stabilizing the electrode-electrolyte interfaces and constructing safe and long-life-span batteries. Tremendous efforts have been devoted to developing new electrolyte solvents, salts, additives, and recipes, where molecular dynamics (MD) simulations play an increasingly important role in exploring electrolyte structures, physicochemical properties such as ionic conductivity, and interfacial reaction mechanisms. This review affords an overview of applying MD simulations in the study of liquid electrolytes for rechargeable batteries. First, the fundamentals and recent theoretical progress in three-class MD simulations are summarized, including classical, ab initio, and machine-learning MD simulations (section 2). Next, the application of MD simulations to the exploration of liquid electrolytes, including probing bulk and interfacial structures (section 3), deriving macroscopic properties such as ionic conductivity and dielectric constant of electrolytes (section 4), and revealing the electrode-electrolyte interfacial reaction mechanisms (section 5), are sequentially presented. Finally, a general conclusion and an insightful perspective on current challenges and future directions in applying MD simulations to liquid electrolytes are provided. Machine-learning technologies are highlighted to figure out these challenging issues facing MD simulations and electrolyte research and promote the rational design of advanced electrolytes for next-generation rechargeable batteries.

Improving the Accuracy of Atomistic Simulations of the Electrochemical Interface

Atomistic simulation of the electrochemical double layer is an ambitious undertaking, requiring quantum mechanical description of electrons, phase space sampling of liquid electrolytes, and equilibration of electrolytes over nanosecond time scales. All models of electrochemistry make different trade-offs in the approximation of electrons and atomic configurations, from the extremes of classical molecular dynamics of a complete interface with point-charge atoms to correlated electronic structure methods of a single electrode configuration with no dynamics or electrolyte. Here, we review the spectrum of simulation techniques suitable for electrochemistry, focusing on the key approximations and accuracy considerations for each technique. We discuss promising approaches, such as enhanced sampling techniques for atomic configurations and computationally efficient beyond density functional theory (DFT) electronic methods, that will push electrochemical simulations beyond the present frontier.

The Role of Energy Scales for the Structure of Ionic Liquids at Electrified Interfaces: A Theory-Based Approach

Ionic liquids offer unique bulk and interfacial characteristics as battery electrolytes. Our continuum approach naturally describes the electrolyte on a macroscale. An integral formulation for the molecular repulsion, which can be quantitatively determined by both experimental and theoretical methods, models the electrolyte on the nanoscale. In this article, we perform a systematic series expansion of this integral formulation, derive a description of chemical potentials in terms of higher-order concentration gradients, and rationalize the appearance of fourth-order derivative operators in modified Poisson equations, as recently proposed in this context. In this way, we formulate a rigorous multiscale methodology from atomistic quantum chemistry calculations to phenomenological continuum models. We apply our generalized framework to ionic liquids near electrified interfaces and perform analytical asymptotic analysis. Three energy scales describing electrostatic forces between ions, molecular repulsion, and thermal motion determine the shape and width of the long-ranging charged double layer. We classify the charge screening mechanisms dependent on the system parameters as dielectricity, ion size, interaction strength, and temperature. We find that the charge density of electrochemical double layers in ionic liquids either decays exponentially, for negligible molecular repulsion, or oscillates continuously. Charge ordering across several ion diameters occurs if the repulsion between molecules is comparable with thermal energy and Coulomb interactions. Eventually, phase separation of the bulk electrolyte into ionic layers emerges once the molecular repulsion becomes dominant. Our framework predicts the exact phase boundaries among these three phases as a function of temperature, dielectricity, and ion size.

Interfacial water asymmetry at ideal electrochemical interfaces

Controlling electrochemical reactivity requires a detailed understanding of the charging behavior and thermodynamics of the electrochemical interface. Experiments can independently probe the overall charge response of the electrochemical double layer by capacitance measurements and the thermodynamics of the inner layer with potential of maximum entropy measurements. Relating these properties by computational modeling of the electrochemical interface has so far been challenging due to the low accuracy of classical molecular dynamics (MD) for capacitance and the limited time and length scales of ab initio MD. Here, we combine large ensembles of long-time-scale classical MD simulations with charge response from electronic density functional theory to predict the potential-dependent capacitance of a family of ideal aqueous electrochemical interfaces with different peak capacitances. We show that while the potential of maximum capacitance varies, this entire family exhibits an electrode charge of maximum capacitance (CMC) between -2.9 and -2.2 μC/cm², regardless of the details in the electronic response. Simulated heating of the same interfaces reveals that the entropy peaks at a charge of maximum entropy (CME) of -5.1 ± 0.6 μC/cm², in agreement with experimental findings for metallic electrodes. The CME and CMC both indicate asymmetric response of interfacial water that is stronger for negatively charged electrodes, while the difference between CME and CMC illustrates the richness in behavior of even the ideal electrochemical interface.

Modelling cetrimonium micelles as 4-OH cinnamate carriers targeting a hydrated iron oxide surface

HYPOTHESIS

Molecular interactions between 4-OH-cinnamate and cetrimonium in solution result in improved adsorption of the cinnamate on mild steel, developing a protective mechanism against the diffusion of corrosive chloride to the oxide surface. Fundamental understanding of this mechanism should allow new design routes for the development of eco-friendly corrosion inhibitors.

EXPERIMENTS

Via classic molecular dynamics, simulations were carried out for cetrimonium and 4-OH-cinnamate in aqueous solutions at different ionic strengths and the results were validated with experimental SAXS data. Self-aggregation of cetrimonium 4-OH-cinnamate on a hydrated hematite surface was then simulated and results were compared with cryo-TEM imaging for the same compound. Finally, the effect of the adsorbed aggregates on chloride diffusion to the oxide surface was modelled.

FINDINGS

Simulations showed the encapsulation of 4-OH-cinnamate into cetrimonium micelles, consistent with experiments. The newly formed micelles adsorb onto a hydrated iron oxide surface by forming hydrogen bonds between their carboxylate outer-shell groups and the surface hydroxyls. As the adsorbate concentrations increase, there is a morphological transition from spherical to wormlike adsorbed aggregates. The wormlike structure can block chloride ions, demonstrating a synergistic inhibitory mechanism between both cetrimonium and 4-OH-cinnamate. Encapsulation and delivery of active compounds to certain targets, such as carcinogenic tumors, have been well studied in biochemistry research, we demonstrate that the same mechanism can be applied to the design of efficient corrosion inhibitors, optimizing their delivery to the metal surface.

Electrolyte structure near electrodes with molecular-size roughness

Understanding electrodes' surface morphology influence on ions' distribution is essential for designing supercapacitors with enhanced energy density characteristics. We develop a model for the structure of electrolytes near the rough surface of electrodes. The model describes an effective electrostatic field's increase and associated intensification of ions' spatial separation at the electrode-electrolyte interface. These adsorption-induced local electric and structure properties result in notably increased values and a sharpened form of the differential capacitance dependence on the applied potential. Such capacitance behavior is observed in many published simulations, and its description is beyond the capabilities of the established flat-electrodes theories. The proposed approach could extend the quantitatively verified models providing a new instrument of the electrode surface-parameter optimization for specific electrolytes.

Atomic structure and electrical property of ionic liquids at the MoS2 electrode with varying interlayer spacing

Understanding the structure and properties at the electrolyte-electrode interface is vital for the rational design of the supercapacitors or other electrochemical devices. In this work, we explored the influence of interlayer spacing of the MoS₂ electrode on the interfacial structure and electrical properties of sodium-ionic liquids (ILs) electrolytes via performing the all-atom molecular dynamics simulations. From the number density, charge density, and electrical potential distribution near the surface, the Mo- and S-terminal edges possess positive and negative features when the interlayer spacing is less than 8.5 Å. Meanwhile, the strength of the first density layer of ILs increases with the increase of the interlayer spacing of MoS₂ for both Mo- and S- terminal surfaces in the neutral or charging state. Furthermore, the coordination number of sodium ion at the electrode surface was analyzed, and it was shown that the S-terminal surface has a larger coordination number than that on the Mo-terminal surface. Interestingly, the coordination number of MoS₂ with the interlayer spacing of 8.0 Å is the lowest in the ranges of 6.5~8.5 Å. The electrolyte's charge screening factor also reflects the opposite electrical state of Mo- and S-terminal surfaces and weakens with increasing the interlayer spacing and surface charge density. The obtained understanding of ILs at electrode interfaces with different layer spacings in this work will provide insight into the molecular mechanisms of ILs-based sodium supercapacitors or other electrochemical devices in critical chemical engineering processes.

Engineering high-energy-density sodium battery anodes for improved cycling with superconcentrated ionic-liquid electrolytes

Non-uniform metal deposition and dendrite formation in high-density energy storage devices reduces the efficiency, safety and life of batteries with metal anodes. Superconcentrated ionic-liquid electrolytes (for example 1:1 ionic liquid:alkali ion) coupled with anode preconditioning at more negative potentials can completely mitigate these issues, and therefore revolutionize high-density energy storage devices. However, the mechanisms by which very high salt concentration and preconditioning potential enable uniform metal deposition and prevent dendrite formation at the metal anode during cycling are poorly understood, and therefore not optimized. Here, we use atomic force microscopy and molecular dynamics simulations to unravel the influence of these factors on the interface chemistry in a sodium electrolyte, demonstrating how a molten-salt-like structure at the electrode surface results in dendrite-free metal cycling at higher rates. Such a structure will support the formation of a more favourable solid electrolyte interphase, accepted as being a critical factor in stable battery cycling. This new understanding will enable engineering of efficient anode electrodes by tuning the interfacial nanostructure via salt concentration and high-voltage preconditioning.

Microstructural and Dynamical Heterogeneities in Ionic Liquids

Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.

Electric double layer formation and storing energy processes on graphene-based supercapacitors from electrical and thermodynamic perspectives

Atomistic molecular dynamics simulations were used to investigate the processes of electrical double layer formation and electrolyte confinement in graphene-based supercapacitors. For both processes, free energy calculations were used to analyze the thermodynamics involved in the electrolyte confinement and its re-arrangement in a double layer on the electrode surface. The value of the free energy of the formation of the double electric layer was related to the energy required to charge the supercapacitor, i.e., the energy density stored, and compared with values obtained using Poisson's electrostatic formalism, which is the conventionally employed approach. Both analyzes were consistent with each other, presenting compatible values for the stored energy.

Tuning Sodium Interfacial Chemistry with Mixed-Anion Ionic Liquid Electrolytes

The interphase layer that forms on either the anode or the cathode is considered to be one of the critical components of a high performing battery. This solid-electrolyte interphase (SEI) layer determines the stability of the electrode in the presence of a given electrolyte as well as the internal resistance of a battery, and hence the overpotential of a cell. In the case of lithium ion batteries where carbonate based electrolytes are used, additives including hexafluorophosphate (PF₆), bis-trifluoromethylsulfonimide (TFSI), (fluorosulfonyl)(trifluoromethanesulfonyl)imide (FTFSI), and fluorosulfonimde (FSI) are used to obtain favorable SEI layers. Ionic liquids and salts based on anions containing nitrile groups, including dicyanamide (DCA), offer a less expensive alternative to a fluorinated anion and have also been shown to support stable electrochemistry in lithium and sodium systems. However, longer term cycling leads to the eventual passivation of the electrode, presumed to be due to the instability of the DCA anion. We herein consider the use of a fluorinated anion to control the interfacial electrochemistry and provide a more stable SEI in DCA ILs. We investigate the addition of NaDCA, NaFSI, NaTFSI, and NaFTFSI to the methylpropylpyrrolidinium dicyanamide ([C3mpyr]DCA) ionic liquid. NaFSI was found to generate a more stable SEI layer, as evidenced by extended symmetric cell cycling, while the TFSI and FTFSI salts both lead to thicker, highly passivating surfaces. We use molecular dynamics, infrared spectroscopy and X-ray photoelectron spectroscopy to interrogate and discuss the influence of the anion on the bulk electrolyte, the interfacial electrolyte structure, and the formation of the SEI layer, in order to rationalize the contrasting electrochemical observations.

Graphene Meets Ionic Liquids: Fermi Level Engineering via Electrostatic Forces

Graphene-based two-dimensional (2D) materials are promising candidates for a number of different energy applications. A particularly interesting one is in next generation supercapacitors, where graphene is being explored as an electrode material in combination with room temperature ionic liquids (ILs) as electrolytes. Because the amount of energy that can be stored in such supercapacitors critically depends on the electrode-electrolyte interface, there is considerable interest in understanding the structure and properties of the graphene/IL interface. Here, we report the changes in the properties of graphene upon adsorption of a homologous series of alkyl imidazolium tetrafluoroborate ILs using a combination of experimental and theoretical tools. Raman spectroscopy reveals that these ILs cause n-type doping of graphene, and the magnitude of doping increases with increasing cation chain length despite the expected decrease in the density of surface-adsorbed ions. Molecular modeling simulations show that doping originates from the changes in the electrostatic potential at the graphene/IL interface. The findings described here represent an important step in developing a comprehensive understanding of the graphene/IL interface.

Potential dependent capacitance of [EMIM][TFSI], [N1114][TFSI] and [PYR13][TFSI] ionic liquids on glassy carbon

Potential dependent capacitance of [N₁₁₁₄][TFSI] suggests the crowding mechanism at the wings of the potential range and overscreening near PZC.

Investigating the asymmetry in the EDL response of C60/graphene supercapacitors

Molecular dynamics simulations were employed to model C₆₀/graphene composite electrodes that can expand the effective area and performance of supercapacitors.

NaRIBaS—A Scripting Framework for Computational Modeling of Nanomaterials and Room Temperature Ionic Liquids in Bulk and Slab

Computational modeling is more and more often used in studies of novel ionic liquids. The inevitable side-effect is the growing number of similar computations that require automation. This article introduces NaRIBaS (Nanomaterials and Room Temperature Ionic Liquids in Bulk and Slab)—a scripting framework that combines bash scripts with computational codes to ease modeling of nanomaterials and ionic liquids in bulk and slab. NaRIBaS helps to organize and document all input and output data, thus, improving the reproducibility of computations. Three examples are given to illustrate the NaRIBaS workflows for density functional theory (DFT) calculations of ionic pairs, molecular dynamics (MD) simulations of bulk ionic liquids (ILs), and MD simulations of ILs at an interface.

Storing Energy in Biodegradable Electrochemical Supercapacitors

The development of green and biodegradable electrical components is one of the main fronts of research to overcome the growing ecological problem related to the issue of electronic waste. At the same time, such devices are highly desirable in biomedical applications such as integrated bioelectronics, for which biocompatibility is also required. Supercapacitors for storage of electrochemical energy, designed only with biodegradable organic matter would contemplate both aspects, that is, they would be ecologically harmless after their service lifetime and would be an important component for applications in biomedical engineering. By means of atomistic simulations of molecular dynamics, we propose a supercapacitor whose electrodes are formed exclusively by self-organizing peptides and whose electrolyte is a green amino acid ionic liquid. Our results indicate that this supercapacitor has a high potential for energy storage with superior performance than conventional supercapacitors. In particular its capacity to store energy was estimated to be almost 20 times greater than an analogue one of planar metallic electrodes.

Design of Supercapacitor Electrodes Using Molecular Dynamics Simulations

Electric double-layer capacitors (EDLCs) are advanced electrochemical devices for energy storage and have attracted strong interest due to their outstanding properties. Rational optimization of electrode-electrolyte interactions is of vital importance to enhance device performance for practical applications. Molecular dynamics (MD) simulations could provide theoretical guidelines for the optimal design of electrodes and the improvement of capacitive performances, e.g., energy density and power density. Here we discuss recent MD simulation studies on energy storage performance of electrode materials containing porous to nanostructures. The energy storage properties are related to the electrode structures, including electrode geometry and electrode modifications. Altering electrode geometry, i.e., pore size and surface topography, can influence EDL capacitance. We critically examine different types of electrode modifications, such as altering the arrangement of carbon atoms, doping heteroatoms and defects, which can change the quantum capacitance. The enhancement of power density can be achieved by the intensified ion dynamics and shortened ion pathway. Rational control of the electrode morphology helps improve the ion dynamics by decreasing the ion diffusion pathway. Tuning the surface properties (e.g., the affinity between the electrode and the ions) can affect the ion-packing phenomena. Our critical analysis helps enhance the energy and power densities of EDLCs by modulating the corresponding electrode structures and surface properties.

Charge driven lateral structural evolution of ions in electric double layer capacitors strongly correlates with differential capacitance

The correlation between differential capacitance and lateral ordering evolution of ionic liquids at charged electrodes has been investigated in this work.

Confinement of aqueous mixtures of ionic liquids between amorphous TiO2 slit nanopores: electrostatic field induction

Electrostatic potential in the vicinity of the surface is induced when aqueous mixtures of hydrophobic and hydrophilic ionic liquids (ILs) are confined between a slit nanopore of amorphous but not crystalline TiO₂ semiconductors.

Microscopic properties of ionic liquid/organic semiconductor interfaces revealed by molecular dynamics simulations

Structural and dynamic properties of an ionic liquid are compared on several organic semiconductors.

On the thickness of the double layer in ionic liquids

The Au(111)|BF₄⁻interface model in which BF₄⁻reorients and spontaneously dissociates at surface coverageθ= 1/3.

Effects and controls of capacitive hysteresis in ionic liquid electrochemical measurements

Capacitance vs. potential relationships help electrochemists better understand electrode–liquid interfacial behaviors.

Ionic Liquids for Supercapacitor Applications

Supercapacitors are electrochemical energy storage devices in which the charge is accumulated through the adsorption of ions from an electrolyte on the surface of the electrode. Because of their large ionic concentrations, ionic liquids have widely been investigated for such applications. The main properties that have to be optimized are the electrochemical window, the electrical conductivity, and the interfacial capacitances. Ionic liquids allow a significant improvement of the former, but they suffer from their high viscosity. In this review, I will discuss the advantages and the inconvenience of using ionic liquids in supercapacitors. Some innovative approaches using mixtures of ionic liquids or redox-active ions will also be critically addressed.

Electric potential calculation in molecular simulation of electric double layer capacitors

For the molecular simulation of electric double layer capacitors (EDLCs), a number of methods have been proposed and implemented to determine the one-dimensional electric potential profile between the two electrodes at a fixed potential difference. In this work, we compare several of these methods for a model LiClO4-acetonitrile/graphite EDLC simulated using both the traditional fixed-charged method (FCM), in which a fixed charge is assigned a priori to the electrode atoms, or the recently developed constant potential method (CPM) (2007 J. Chem. Phys. 126 084704), where the electrode charges are allowed to fluctuate to keep the potential fixed. Based on an analysis of the full three-dimensional electric potential field, we suggest a method for determining the averaged one-dimensional electric potential profile that can be applied to both the FCM and CPM simulations. Compared to traditional methods based on numerically solving the one-dimensional Poisson's equation, this method yields better accuracy and no supplemental assumptions.

A comparative study of room temperature ionic liquids and their organic solvent mixtures near charged electrodes

The structural properties of electrolytes consisting of solutions of ionic liquids in a polar solvent at charged electrode surfaces are investigated using classical atomistic simulations. The studied electrolytes consisted of tetraethylammonium tetrafluoroborate (NEt4-BF4), 1-ethyl-3-methylimidazolium tetrafluoroborate (c2mim-BF4) and 1-octyl-3-methylimidazolium tetrafluoroborate (c8mim-BF4) salts dissolved in acetonitrile solvent. We discuss the influence of electrolyte concentration, chemical structure of the ionic salt, temperature, conducting versus semiconducting nature of the electrode, electrode geometry and surface roughness on the electric double layer structure and capacitance and compare these properties with those obtained for pure room temperature ionic liquids. We show that electrolytes consisting of solutions of ions can behave quite differently from pure ionic liquid electrolytes.

Fused coarse-grained model of aromatic ionic liquids and their behaviour at electrodes

A fused coarse-grained model of aromatic ionic liquids 1-alkyl-3-methylimidazoliums tetrafluoroborate ([C_nMIM⁺][BF₄⁻]) has been constructed.

The interface between HOPG and 1-butyl-3-methyl-imidazolium hexafluorophosphate

The interface between highly oriented pyrolytic graphite (HOPG) and 1-butyl-3-metyl-imidazolium hexafluorophosphate (BMIPF₆) has been studied using cyclic voltammetry, electrochemical impedance spectroscopy, immersion charge measurements and in situ scanning tunneling microscopy (in situ STM).

Structural Transitions at Ionic Liquid Interfaces

Recent advances in experimental and computational techniques have allowed for an accurate description of the adsorption of ionic liquids on metallic electrodes. It is now well-established that they adopt a multilayered structure and that the composition of the layers changes with the potential of the electrode. In some cases, potential-driven ordering transitions in the first adsorbed layer have been observed in experiments probing the interface on the molecular scale or by molecular simulations. This perspective gives an overview of the current understanding of such transitions and of their potential impact on the physical and (electro)chemical processes at the interface. In particular, peaks in the differential capacitance, slow dynamics at the interface, and changes in the reactivity have been reported in electrochemical studies. Interfaces between ionic liquids and metallic electrodes are also highly relevant for their friction properties, the voltage-dependence of which opens the way to exciting applications.