Plasmonic Metal Mediated Charge Transfer in Stacked Core-Shell Semiconductor Heterojunction for Significantly Enhanced CO2 Photoreduction

Construction of core-shell semiconductor heterojunctions and plasmonic metal/semiconductor heterostructures represents two promising routes to improved light harvesting and promoted charge separation, but their photocatalytic activities are respectively limited by sluggish consumption of charge carriers confined in the cores, and contradictory migration directions of plasmon-induced hot electrons and semiconductor-generated electrons. Herein, a semiconductor/metal/semiconductor stacked core-shell design is demonstrated to overcome these limitations and significantly boost the photoactivity in CO₂  reduction. In this smart design, sandwiched Au serves as a "stone", which "kills two birds" by inducing localized surface plasmon resonance for hot electron generation and mediating unidirectional transmission of conduction band electrons and hot electrons from TiO₂  core to MoS₂  shell. Meanwhile, upward band bending of TiO₂  drives core-to-shell migration of holes through TiO₂ -MoS₂  interface. The co-existence of TiO₂  → Au → MoS₂  electron flow and TiO₂  → MoS₂  hole flow contributes to spatial charge separation on different locations of MoS₂  outer layer for overall redox reactions. Additionally, reduction potential of photoelectrons participating in the CO₂  reduction is elaborately adjusted by tuning the thickness of MoS₂  shell, and thus the product selectivity is delicately regulated. This work provides fresh hints for rationally controlling the charge transfer pathways toward high-efficiency CO₂  photoreduction.

A Flower-like In2O3 Catalyst Derived via Metal-Organic Frameworks for Photocatalytic Applications

The most pressing concerns in environmental remediation are the design and development of catalysts with benign, low-cost, and efficient photocatalytic activity. The present study effectively generated a flower-like indium oxide (In₂O₃-MF) catalyst employing a convenient MOF-based solvothermal self-assembly technique. The In₂O₃-MF photocatalyst exhibits a flower-like structure, according to morphology and structural analysis. The enhanced photocatalytic activity of the In₂O₃-MF catalyst for 4-nitrophenol (4-NP) and methylene blue (MB) is likely due to its unique 3D structure, which includes a large surface area (486.95 m² g^-1), a wide spectrum response, and the prevention of electron-hole recombination compared to In₂O₃-MR (indium oxide-micro rod) and In₂O₃-MD (indium oxide-micro disc). In the presence of NaBH₄ and visible light, the catalytic performances of the In₂O₃-MF, In₂O₃-MR, and In₂O₃-MD catalysts for the reduction of 4-NP and MB degradation were investigated. Using In₂O₃-MF as a catalyst, we were able to achieve a 99.32 percent reduction of 4-NP in 20 min and 99.2 percent degradation of MB in 3 min. Interestingly, the conversion rates of catalytic 4-NP and MB were still larger than 95 and 96 percent after five consecutive cycles of catalytic tests, suggesting that the In₂O₃-MF catalyst has outstanding catalytic performance and a high reutilization rate.

Sulfide-Based Photocatalysts Using Visible Light, with Special Focus on In2S3, SnS2 and ZnIn2S4

Sulfides are frequently used as photocatalysts, since they absorb visible light better than many oxides. They have the disadvantage of being more easily photocorroded. This occurs mostly in oxidizing conditions; therefore, they are commonly used instead in reduction processes, such as CO2 reduction to fuels or H2 production. Here a summary will be presented of a number of sulfides used in several photocatalytic processes; where appropriate, some recent reviews will be presented of their behaviour. Results obtained in recent years by our group using some octahedral sulfides will be shown, showing how to determine their wavelength-dependent photocatalytic activities, checking their mechanisms in some cases, and verifying how they can be modified to extend their wavelength range of activity. It will be shown here as well how using photocatalytic or photoelectrochemical setups, by combining some enzymes with these sulfides, allows achieving the photo-splitting of water into H2 and O2, thus constituting a scheme of artificial photosynthesis.

MOFs-Derived Fusiform In2 O3 Mesoporous Nanorods Anchored with Ultrafine CdZnS Nanoparticles for Boosting Visible-Light Photocatalytic Hydrogen Evolution

The development of efficient visible-light-driven photocatalysts is one of the critically important issues for solar hydrogen production. Herein, high-efficiency visible-light-driven In₂ O₃ /CdZnS hybrid photocatalysts are explored by a facile oil-bath method, in which ultrafine CdZnS nanoparticles are anchored on NH₂ -MIL-68-derived fusiform In₂ O₃ mesoporous nanorods. It is disclosed that the as-prepared In₂ O₃ /CdZnS hybrid photocatalysts exhibit enhanced visible-light harvesting, improves charges transfer and separation as well as abundant active sites. Correspondingly, their visible-light-driven H₂ production rate is significantly enhanced for more than 185 times to that of pristine In₂ O₃ nanorods, and superior to most of In₂ O₃ -based photocatalysts ever reported, representing their promising applications in advanced photocatalysts.

Metal chalcogenide-based core/shell photocatalysts for solar hydrogen production: Recent advances, properties and technology challenges

Metal chalcogenides play a vital role in the conversion of solar energy into hydrogen fuel. Hydrogen fuel technology can possibly tackle the future energy crises by replacing carbon fuels such as petroleum, diesel and kerosene, owning to zero emission carbon-free gas and eco-friendliness. Metal chalcogenides are classified into narrow band gap (CdS, Cu₂S, Bi₂S_3, MoS_2, CdSe and MoSe₂) materials and wide band gap materials (ZnS, ZnSe and ZnTe). Composites of these materials are fabricated with different architectures in which core-shell is one of the unique composites that drastically improve the photo-excitons separation, where chalcogenides in the core can be well protected for sustainable uses. Thus,the core-shell structures promote the design and fabrication of composites with the required characteristics. Interestingly, the metal chalcogenides as a core-shell photocatalyst can be classified into type-I, reverse type-I, type-II and S-type nanocomposites, which can effectively influence and significantly enhance the rate of hydrogen production. In this direction, this review is undertaken to provide a comprehensive overview of the advanced preparation processes, properties of metal chalcogenides, and in particular, photocatalytic performance of the metal chalcogenides as a core-shell photocatalysts for solar hydrogen production.

[Bmmim]6[In10Se16Cl4]·(MIm)2: an organic-ligand free discrete T3 cluster for efficient hydrogen evolution under visible light irradiation

An indium selenide [Bmmim]6[In10Se16Cl4]·(MIm)2 (Bmmim = 1-butyl-2,3-dimethylimidazolium, MIm = 1-methylimidazole) cluster has been synthesized and characterized. The discrete T3 cluster could be stably dispersed in dimethyl sulfoxide, exhibiting photocatalytic hydrogen evolution activity at least six times that of the pristine in the solid state due to the exposure of more active sites.

Black Phosphorus-Based Semiconductor Heterojunctions for Photocatalytic Water Splitting

Solar-to-hydrogen (H₂ ) conversion has been regarded as a sustainable and renewable technique to address aggravated environmental pollution and global energy crisis. The most critical aspect in this technology is to develop highly efficient and stable photocatalysts, especially metal-free photocatalysts. Recently, black phosphorus (BP), as a rising star 2D nanomaterial, has captured enormous attention in photocatalytic water splitting owing to its widespread optical absorption, adjustable direct band gap, and superior carrier migration characteristics. However, the rapid charge recombination of pristine BP has seriously limited its practical application as photocatalyst. The construction of BP-based semiconductor heterojunctions has been proven to be an effective strategy for enhancing the separation of photogenerated carriers. This Minireview attempts to summarize the recent progress in BP-based semiconductor heterojunctions for photocatalytic water splitting, including type-I and type-II heterojunctions, Z-Scheme systems, and multicomponent heterojunctions. Finally, a brief summary and perspective on the challenges and future directions in this field are also provided.

A robust CdS/In2O3 hierarchical heterostructure derived from a metal–organic framework for efficient visible-light photocatalytic hydrogen production

CdS/In₂O₃ hierarchical nanotubes with intimate and extensive contact between CdS and In₂O₃ were synthesized from a MOF and showed huge improvement of visible-light photocatalytic hydrogen production.

Multiple carrier-transfer pathways in a flower-like In2S3/CdIn2S4/In2O3 ternary heterostructure for enhanced photocatalytic hydrogen production

A novel flower-like In2S3/CdIn2S4/In2O3 (ICS) ternary heterostructure (HS) is rationally constructed for the first time by a series of carefully designed procedures. In2O3 nanoflakes are the main constituent units which assemble into a flower-like skeleton structure, and CdIn2S4 nanoparticles are in situ generated on the surface of In2O3 nanoflakes through the transformation of CdS quantum dots (QDs) while In2S3 nanoparticles are in situ produced at the region between CdIn2S4 nanoparticles and In2O3 nanoflakes resulting from a synchronous sulfuration procedure. As expected, the rationally designed ICS ternary HSs display significantly enhanced photocatalytic H2 production, especially ICS5 (sulfurized for 5 h) with the highest H2 evolution rate of 20.04 μmol h-1 (10 mg catalyst is used for photocatalytic reaction), which is 26.7 times and 2.6 times higher than that of pure In2O3 (0.75 μmol h-1) and In2S3/In2O3 binary HS (7.88 μmol h-1), respectively. The enhanced photocatalytic activity can be attributed to the multiple interfaces formed in the ICS HSs, including the CdIn2S4-In2O3 interface, the In2S3-In2O3 interface, and the CdIn2S4-In2O3-In2S3 interface, which construct multiple pathways for the transfer of photogenerated charge carriers, effectively promoting the photocatalytic hydrogen production.

Surface Species and Metal Oxidation State during H2-Assisted NH3-SCR of NOx over Alumina-Supported Silver and Indium

Alumina-supported silver and indium catalysts are investigated for the hydrogen-assisted selective catalytic reduction (SCR) of NOx with ammonia. Particularly, we focus on the active phase of the catalyst and the formation of surface species, as a function of the gas environment. Diffuse reflectance ultraviolet-visible (UV-vis) spectroscopy was used to follow the oxidation state of the silver and indium phases, and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used to elucidate the formation of surface species during SCR conditions. In addition, the NOx reduction efficiency of the materials was evaluated using H2-assisted NH3-SCR. The DRIFTS results show that the Ag/Al2O3 sample forms NO-containing surface species during SCR conditions to a higher extent compared to the In/Al2O3 sample. The silver sample also appears to be more reduced by H2 than the indium sample, as revealed by UV-vis spectroscopic experiments. Addition of H2, however, may promote the formation of highly dispersed In2O3 clusters, which previously have been suggested to be important for the SCR reaction. The affinity to adsorb NH3 is confirmed by both temperature programmed desorption (NH3-TPD) and in situ DRIFTS to be higher for the In/Al2O3 sample compared to Ag/Al2O3. The strong adsorption of NH3 may inhibit (self-poison) the NH3 activation, thereby hindering further reaction over this catalyst, which is also shown by the lower SCR activity compared to Ag/Al2O3.

An enhanced degree of charge transfer in dye-sensitized solar cells with a ZnO-TiO2/N3/Ag structure as revealed by surface-enhanced Raman scattering

A number of recent studies have focused on improving the performance of dye-sensitized solar cells (DSSCs). Cells with a ZnO-TiO₂/N3/Ag structure have attracted particular attention because of their excellent power conversion efficiencies. Using a dendritic crystal ZnO-TiO₂ composite semiconductor and Ag in conjunction leads to different charge-transfer (CT) processes, and this is the main theoretical basis for the improvement of DSSC performances. Thus, in the present study, TiO₂/N3, ZnO/N3, ZnO-TiO₂/N3, TiO₂/N3/Ag, ZnO/N3/Ag, and ZnO-TiO₂/N3/Ag assemblies have been fabricated and their CT processes have been monitored by using surface-enhanced Raman scattering (SERS) spectra, with particular focus on the differences caused by the synergistic effect of the ZnO-TiO₂ component. The dye loading capacity of the dendritic crystal ZnO-TiO₂ is much larger than that of TiO₂. There are extra enhancements in the SERS intensity and degree of CT (ρ_CT) in ZnO-TiO₂/N3 compared to ZnO + TiO₂/N3 (based on a simulation curve for the physically mixed TiO₂ and ZnO semiconductors) with 476.5 nm excitation due to the synergistic effect of the ZnO-TiO₂ component. And these enhancements in ZnO-TiO₂/N3/Ag compared to ZnO + TiO₂/N3/Ag appear with 476.5 and 532 nm excitation, which are particularly large with 532 nm excitation. Accordingly, the participation of Ag in this synergistic effect can reduce its energy threshold, which will make it easier to appear. Finally, to rationalize these extra enhancements, the models describing the CT mechanism have been proposed. Thus, the use of the dendritic crystal ZnO-TiO₂ composite semiconductor in the semiconductor/N3/Ag system can improve the adsorption capacity of N3 compared to that with TiO₂. Meanwhile, the synergistic effect of ZnO-TiO₂ and Ag can promote the CT process, demonstrating that ZnO-TiO₂/N3/Ag is an excellent structure for DSSCs.

Charge Transport in Two-Photon Semiconducting Structures for Solar Fuels

Semiconducting heterostructures are emerging as promising light absorbers and offer effective electron-hole separation to drive solar chemistry. This technology relies on semiconductor composites or photoelectrodes that work in the presence of a redox mediator and that create cascade junctions to promote surface catalytic reactions. Rational tuning of their structures and compositions is crucial to fully exploit their functionality. In this review, we describe the possibilities of applying the two-photon concept to the field of solar fuels. A wide range of strategies including the indirect combination of two semiconductors by a redox couple, direct coupling of two semiconductors, multicomponent structures with a conductive mediator, related photoelectrodes, as well as two-photon cells are discussed for light energy harvesting and charge transport. Examples of charge extraction models from the literature are summarized to understand the mechanism of interfacial carrier dynamics and to rationalize experimental observations. We focus on a working principle of the constituent components and linking the photosynthetic activity with the proposed models. This work gives a new perspective on artificial photosynthesis by taking simultaneous advantages of photon absorption and charge transfer, outlining an encouraging roadmap towards solar fuels.

Enhancement of photocatalytic decomposition of perfluorooctanoic acid on CeO2/In2O3

The xCeO₂/In₂O₃ catalysts were synthesized and used for photocatalytic decomposition of PFOA. The excellent activity and stability was derived from inhibition of electron-holes recombination caused by the charge transfer between CeO₂ and In₂O₃.

Type-II α-In2S3/In2O3 nanowire heterostructures: evidence of enhanced photo-induced charge separation efficiency

Type-II α-In₂S₃/In₂O₃ nanowire heterostructures exhibit significant photo-induced carrier life time improvement and visible-light-driven photocatalytic activity.

Ternary In2S3/In2O3 heterostructures and their cathodoluminescence

Three-dimensional In₂S₃/In₂O₃ heterostructures are obtained through a CVD process. The heterostructures have a broad emission band covering the whole visible range, which holds a promise in photocatalytic applications.

Review of one-dimensional and two-dimensional nanostructured materials for hydrogen generation

Hydrogen is an attractive alternative to fossil fuels in terms of environmental and other advantages.

ZnO nanoplate-induced phase transformation synthesis of the composite ZnS/In(OH)3/In2S3 with enhanced visible-light photodegradation activity of pollutants

The as-synthesized composite ZnS/In(OH)₃/In₂S₃ by phase transformation induced by ZnO nanoplates exhibits excellent photoactivity due to the suitable energy band structure and wider pore size distribution.