Mesogenic Ordering-Driven Self-Assembly of Liquid Crystalline Block Copolymers in Solution

With the development of nanotechnology, the preparation of polymeric nanoparticles with nicely defined structures has been well-developed, and the functionalization and subsequent applications of the resultant nanostructures are becoming increasingly important. Particularly, by introducing mesogenic ordering as the driving force for the solution-state self-assembly of liquid crystalline (LC) block copolymers (BCPs), micellar nanostructures with different morphologies, especially anisotropic morphologies, can be easily prepared. This review summarizes the recent progress in the solution-state self-assembly of LC BCPs and is mostly focused on four main related aspects, including an in-depth understanding of the mesogenic ordering-driven self-assembly, precise assembly methods, utilization of these methods to fabricate hierarchical structures, and the potential applications of these well-defined nanostructures. We hope not only to make a systematic summary of previous studies but also to provide some useful thinking for the future development of this field.

Self-assembly of amphiphilic asymmetric comb-like copolymers with responsive rigid side chains

Amphiphilic asymmetric comb-like copolymers (AACCs) exhibit distinct self-assembly behaviours due to their unique architecture. However, the synthetic difficulties of well-defined AACCs have prohibited a systematic understanding of the architecture-morphology relationship. In this work, we conducted dissipative particle dynamics simulations to investigate the self-assembly behaviours of AACCs with responsive rigid side chains in selective solvents. The effects of side chain length, number of branches, and spacers on the morphology of aggregates were investigated by mapping out morphology diagrams. Besides, the numbers and surface areas of aggregates clearly depicted the morphological transitions during the self-assembly process. Moreover, the rod-to-coil conformation transitions were simulated to explore the stimuli-responsive behaviour of the AACCs with responsive rigid side chains by adjusting the bond angle parameter of the rigid chains. The results indicated that without the support of the rigid chains, the assembly structure collapsed, leading to the tube-to-channelized micelles and one-compartment-to-multicompartment vesicle morphology transformations. The simulation results are consistent with earlier experimental results, which can provide theoretical guidance for assembly toward desired nanostructures.

Morphologically Tunable Rectangular Platelets Self-Assembled from Diblock Molecular Brushes Containing Azopyridine Pendants

Two-dimensional (2D) platelet structures are of growing importance as building blocks for the preparation of optical and electrical devices. However, the creation of morphologically tunable rectangular platelets through polymer self-assembly still remains a challenge. Herein, we describe a rational strategy for the fabrication of 2D rectangular platelets by stacking azopyridine-containing diblock molecular brushes in two dimensions in a selective solvent. Amphiphilic PEG-co-(PtBA-g-PAzoPy) DMBs with poly(ethylene glycol) (PEG) block, poly(t-butyl acrylate) (PtBA) backbone, and poly(6-(4-(4-pyridyazo)phenoxy)-hexyl methacrylate) (PAzoPy) brush were synthesized by sequential reversible addition-fragmentation chain transfer polymerization and atom transfer radical polymerization. Various rectangular platelets were obtained via the solution self-assembly of PEG-co-(PtBA-g-PAzoPy) through a heating-cooling-aging process in which the morphology and size of platelets could be controlled by adjusting the composition of DMBs as well as the solvent polarity. In addition, we investigated the metal chelation ability and H-bonding-assisted co-assembly capability of PEG-co-(PtBA-g-PAzoPy). The results displayed that 2D hybrids and flower-like platelets were formed, respectively. Our study presents an efficient method to fabricate rectangular platelets with tunable morphologies.

Magnetic control of self-assembly and disassembly in organic materials

Because organic molecules and materials are generally insensitive or weakly sensitive to magnetic fields, a certain means to enhance their magnetic responsiveness needs to be exploited. Here we show a strategy to amplify the magnetic responsiveness of self-assembled peptide nanostructures by synergistically combining the concepts of perfect α-helix and rod-coil supramolecular building blocks. Firstly, we develop a monomeric, nonpolar, and perfect α-helix (MNP-helix). Then, we employ the MNP-helix as the rod block of rod-coil amphiphiles (rod-coils) because rod-coils are well-suited for fabricating responsive assemblies. We show that the self-assembly processes of the designed rod-coils and disassembly of rod-coil/DNA complexes can be controlled in a magnetically responsive manner using the relatively weak magnetic field provided by the ordinary neodymium magnet [0.07 ~ 0.25 Tesla (T)]. These results demonstrate that magnetically responsive organic assemblies usable under practical conditions can be realized by using rod-coil supramolecular building blocks containing constructively organized diamagnetic moieties.

Dynamic Processes and Mechanical Properties of Lipid-Nanoparticle Mixtures

In this study, we investigate the dynamic processes and mechanical properties of lipid nanoparticle mixtures in a melt via dissipation particle dynamic simulation. By investigating the distribution of nanoparticles in lamellar and hexagonal lipid matrices in equilibrium state and dynamic processes, we observe that the morphology of such composites depends not only on the geometric features of the lipid matrix but also on the concentration of nanoparticles. The dynamic processes are also demonstrated by calculating the average radius of gyration, which indicates the isotropic conformation of lipid molecules in the x-y plane and that the lipid chains are stretched in the z direction with the addition of nanoparticles. Meanwhile, we predict the mechanical properties of lipid-nanoparticle mixtures in lamellar structures by analyzing the interfacial tensions. Results show that the interfacial tension decreased with the increase in nanoparticle concentration. These results provide molecular-level information for the rational and a priori design of new lipid nanocomposites with ad hoc tailored properties.

Conjugated Block Copolymers for Functional Nanostructures

Conjugated polymers have been actively studied as an alternative to inorganic semiconductors for their unique optical and electrical properties and low-cost solution processability. However, typical conjugated polymer films contain numerous defects that negatively affect their transport properties, which remains a major issue despite much effort to develop ways to improve the molecular packing structure. In principle, conjugated block copolymers (BCPs) composed of a rod-type conjugated polymer and a coil-type insulating polymer can assemble into various types of ordered nanostructures based on the microphase segregation of two polymer blocks. However, such assembly typically requires a relatively large volume fraction of the coil block or modification of the rod block, both of which tend to impede charge transport. As an alternative, we and others have fabricated nanoscale assemblies of conjugated BCPs via solution-phase self-assembly, which can be used as building blocks for construction of extended nanoarrays of conjugated polymers. In particular, BCPs containing poly(3-hexylthiophene) (P3HT), a conjugated polymer widely used for its high hole mobility, form highly ordered and technologically relevant one-dimensional (1D) nanowires with controlled lengths. A range of well-defined assembly structures such as square plates, ribbons, vesicles, and helices have been prepared from various conjugated BCPs, resembling those of peptide self-assembly, forming diverse nanostructures through combinations of π-π stacking, hydrogen bonding, and hydrophobic interactions.When the self-assembly of P3HT BCPs takes place at an air-water interface, the initially formed polymer nanowires further assemble into hierarchical two-dimensional (2D) nanoarrays with solvent evaporation. The fluidic nature of the water subphase allows fabrication of highly ordered assembly structures from P3HT BCPs with high P3HT content. The ultrathin free-standing film integrated in a field effect transistor (FET) showed orders of magnitude higher current and hole mobility compared to that fabricated by conventional spin-coating. Furthermore, binary self-assembly of a P3HT BCP and quantum dots (QDs) at the air-water interface generates well-ordered 2D films of alternating P3HT nanowires and 1D QD arrays. Unlike coil-coil BCP systems, QDs reside at the interface between P3HT and coil blocks for a broad range of QD sizes due to the strong P3HT packing interactions and the flexible water subphase, forming tight p-n junctions for enhanced photocurrent. Incorporation of magnetic nanoparticles can further improve the degree of order, enabling fabrication of long-range order and direction-controlled P3HT nanoarrays through magnetic-field induced self-assembly.The conjugated BCP approach is highly modular and can be combined with various types of functional molecules, polymers, and nanoparticles, offering a powerful platform for fabrication of functional polymer nanostructures with desired morphologies and properties. This Account introduces recent advances in the self-assembly of π-conjugated BCPs, describes how they differ from prototypical coil-coil type BCPs, and discusses current issues and future outlooks.

Noble-Metal-Based Hollow Mesoporous Nanoparticles: Synthesis Strategies and Applications

As second-generation mesoporous materials, mesoporous noble metals (NMs) are of significant interest for their wide applications in catalysis, sensing, bioimaging, and biotherapy owing to their structural and metallic features. The introduction of interior hollow cavity into NM-based mesoporous nanoparticles (MNs), which subtly integrate hierarchical hollow and mesoporous structure into one nanoparticle, produces a new type of hollow MNs (HMNs). Benefiting from their higher active surface, better electron/mass transfer, optimum electronic structure, and nanoconfinement space, NM-based HMNs exhibit their high efficiency in enhancing catalytic activity and stability and tuning catalytic selectivity. In this review, recent progress in the design, synthesis, and catalytic applications of NM-based HMNs is summarized, including the findings of the groups. Five main strategies for synthesizing NM-based HMNs, namely silica-assisted surfactant-templated nucleation, surfactant-templated sequential nucleation, soft "dual"-template, Kirkendall effect in synergistic template, and galvanic-replacement-assisted surfactant template, are described in detail. In addition, the applications in ethanol oxidation electrocatalysis and hydrogenation reactions are discussed to highlight the high activity, enhanced stability, and optimal selectivity of NM-based HMNs in (electro)catalysis. Finally, the further outlook that may lead the directions of synthesis and applications of NM-based HMNs is prospected.

An experimental and theoretical investigation into the self-assembly of a chemically modified high-χ coil-rod diblock copolymer

A precursor diblock copolymer with a silicon backbone, polystyrene-block-poly(methylvinylsiloxane), was synthesized, and 1H,1H,2H,2H-perfluorodecanethiol was quantitatively introduced into the backbone via a thiol-ene reaction to yield a novel coil–rod diblock copolymer, poly(styrene-block-poly(2-((3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)thio)ethyl)methylsiloxane). The ultra-hydrophobicity of the introduced perfluoroalkyl side chain enhanced the segregation between counter-blocks and significantly increased the χ value, which is essential for minimizing the size of self-assembled domains for lithographic applications. Thus, self-assembled domains with a minimal spacing of approximately 10 nm were formed. A hexagonally packed array with significant anisotropy was observed in the self-assembled morphology by small-angle X-ray scattering and transmission electron microscopy. Such an array was precisely reproduced by modified self-consistent field theory (SCFT) calculation developed for the coil–rod structure. Furthermore, the phase diagram was estimated, and the morphological dependence on the relative scale of the rod unit was investigated by SCFT prediction.

A high-χ coil-rod diblock copolymer capable of forming unique anisotropic hexagonally packed cylindrical domains evidenced by experimental and theoretical study.

Hydrophilic Poly(glutamic acid)-Based Nanodrug Delivery System: Structural Influence and Antitumor Efficacy

Poly(amino acids) have advanced characteristics, including unique secondary structure, enzyme degradability, good biocompatibility, and stimuli responsibility, and are suitable as drug delivery nanocarriers for tumor therapy. The isoform structure of poly(amino acids) plays an important role in their antitumor efficacy and should be researched in detail. In this study, two kinds of pH-sensitive isoforms, including α-poly(glutamic acid) (α-PGA) and γ-PGA, were selected and used as nanocarriers to prepare a nanodrug delivery system. According to the preparation results, α-PGA can be used as an ideal drug carrier. Selecting doxorubicin (DOX) as the model drug, an α-PGA/DOX nanoparticle (α-PGA/DOX NPs) with a particle size of 110.4 nm was prepared, and the drug-loading content was 66.2%. α-PGA/DOX NPs presented obvious sustained and pH-dependent release characteristics. The IC₅₀ value of α-PGA/DOX NPs was 1.06 ± 0.77 μg mL⁻¹, decreasing by approximately 8.5 fold in vitro against 4T1 cells after incubation for 48 h. Moreover, α-PGA/DOX NPs enhanced antitumor efficacy in vivo, the tumor inhibition rate was 67.4%, increasing 1.5 fold over DOX injection. α-PGA/DOX NPs also reduced the systemic toxicity and cardiotoxicity of DOX. In sum, α-PGA is a biosafe nanodrug delivery carrier with potential clinical application prospects.

Tilt Modulus of Bilayer Membranes Self-Assembled from Rod-Coil Diblock Copolymers

Quantitatively understanding membrane fission and fusion requires a mathematical model taking their underlying elastic degrees of freedom, such as the molecule's tilt, into account. Hamm-Kozlov's model is such a framework that includes a tilt modulus along with the bending modulus and Gaussian modulus. This paper investigates the tilt modulus of liquid-crystalline bilayer membranes by applying self-consistent field theory. Unlike the widely used method in molecular dynamics simulation which extracts the tilt modulus by simulating bilayer buckles with various single modes, we introduce a tilt constrain term in the free energy to stabilize bilayers with various tilt angles. Fitting the energy curve as a function of the tilt angle to Hamm-Kozlov's elastic energy allows us to extract the tilt modulus directly. Based on this novel scheme and focused on the bilayers self-assembled from rod-coil diblock copolymers, we carry out a systematic study of the dependence of the tensionless A-phase bilayer's tilt modulus on the microscopic parameters.

Liquid-Crystal Ordering and Microphase Separation in the Lamellar Phase of Rod-Coil-Rod Triblock Copolymers. Molecular Theory and Computer Simulations

A molecular model of the orientationally ordered lamellar phase exhibited by asymmetric rod-coil-rod triblock copolymers has been developed using the density-functional approach and generalizing the molecular-statistical theory of rod-coil diblock copolymers. An approximate expression for the free energy of the lamellar phase has been obtained in terms of the direct correlation functions of the system, the Flory-Huggins parameter and the Maier-Saupe orientational interaction potential between rods. A detailed derivation of several rod-rod and rod-coil density-density correlation functions required to evaluate the free energy is presented. The orientational and translational order parameters of rod and coil segments depending on the temperature and triblock asymmetry have been calculated numerically by direct minimization of the free energy. Different structure and ordering of the lamellar phase at high and low values of the triblock asymmetry is revealed and analyzed in detail. Asymmetric rod-coil-rod triblock copolymers have been simulated using the method of dissipative particle dynamics in the broad range of the Flory-Huggins parameter and for several values of the triblock asymmetry. It has been found that the lamellar phase appears to be the most stable one at strong segregation. The density distribution of the coil segments and the segments of the two different rods have been determined for different values of the segregation strength. The simulations confirm the existence of a weakly ordered lamellar phase predicted by the density-functional theory, in which the short rods separate from the long ones and are characterized by weak positional ordering.

Anchorage-Dependent Living Supramolecular Self-Assembly of Polymeric Micelles

Anchorage-dependent contact-inhibited growth usually refers to on-surface cell proliferation inhibited by the proximity of other cells. This phenomenon, prominent in nature, has yet to be achieved with polymeric micelles. Here, we report the control living supra-macromolecular self-assembly of elongated micelles with a liquid crystalline core onto a hydrophobic substrate via the synergetic interactions between the substrate and aggregates dispersed in solution. In this system, seed formation is a transient phenomenon induced by the adsorption and rearrangement of the core-swollen aggregates. The seeds then trigger the growth of elongated micelles onto the substrate in a living controllable manner until the contact with the substrate is disrupted. Brownian dynamic simulations show that this unique behavior is due to the fusion of the aggregates onto both ends of the anchored seeds. More important, the micelle length can be tuned by varying the substrate hydrophobicity, a key step toward the fabrication of intricate structures.

Hierarchical Nanomaterials Assembled from Peptoids and Other Sequence-Defined Synthetic Polymers

In nature, the self-assembly of sequence-specific biopolymers into hierarchical structures plays an essential role in the construction of functional biomaterials. To develop synthetic materials that can mimic and surpass the function of these natural counterparts, various sequence-defined bio- and biomimetic polymers have been developed and exploited as building blocks for hierarchical self-assembly. This review summarizes the recent advances in the molecular self-assembly of hierarchical nanomaterials based on peptoids (or poly-N-substituted glycines) and other sequence-defined synthetic polymers. Modern techniques to monitor the assembly mechanisms and characterize the physicochemical properties of these self-assembly systems are highlighted. In addition, discussions about their potential applications in biomedical sciences and renewable energy are also included. This review aims to highlight essential features of sequence-defined synthetic polymers (e.g., high stability and protein-like high-information content) and how these unique features enable the construction of robust biomimetic functional materials with high programmability and predictability, with an emphasis on peptoids and their self-assembled nanomaterials.

Analytical Calculation of the Elastic Moduli of Self-Assembled Liquid-Crystalline Bilayer Membranes

Liquid-crystalline orders are ubiquitous in membranes and could significantly affect the elastic properties of the self-assembled bilayers. Calculating the free energy of bilayer membranes with different geometries and fitting them to their theoretical expressions allow us to extract the elastic moduli, such as the bending modulus and Gaussian modulus. However, this procedure is time-consuming for liquid-crystalline bilayers. In paper reports a novel method to calculate the elastic moduli of the self-assembled liquid-crystalline bilayers within the self-consistent field theory framework. Based on the asymptotic expansion method, we derive the analytical expression of the elastic moduli, which reduces the computational cost significantly. Numerical simulations illustrate the validity and efficiency of the proposed method.

Reduction-Induced Crystallization-Driven Self-Assembly of Main-Chain-Type Alternating Copolymers: Transformation from 1D Lines to 2D Platelets

In recent years, crystalline-driven self-assembly (CDSA) has received enormous attention, but almost only for block copolymers (BCPs). Herein, we introduced perfluorocarbon chains into main-chain-type liquid crystalline alternating copolymers (ACPs) to obtain perfluoroalkane-containing ACPs with periodic C-I bonds in polymer backbones via step transfer-addition and radical-termination (START) polymerization, followed by an iodine reduction reaction of C-I bonds to induce CDSA of ACPs and put forward a novel concept of "reduction-induced crystallization-driven self-assembly" (RI-CDSA) of main-chain-type ACPs for the first time. Finally, we proposed the folded-chain model and mechanism to explain the novel RI-CDSA behavior, and its rationality has been proved by the corresponding experimental results.

Self-assembly of rod-coil diblock copolymer-nanoparticle composites in thin films: dissipative particle dynamics

In this study, the assembled structures of rod-coil diblock copolymer and nanoparticle blends were studied via dissipative particle dynamics (DPD). Thin films were composed of soft confinement DPD fluid beads and the fluctuating film structure was maintained during the simulation process. Analysis of the position of nanoparticles was done in the smectic lamellar phase of the rod-coil polymer matrix, and density distributions of rods, coils, and nanoparticles were obtained as functions of the size of the nanoparticle and the DPD repulsion constant between the rod and the nanoparticle. The distribution of nanoparticles was explained by using the concept of translational entropy of nanoparticles, stretching energy of the polymer chain, relative repulsion enthalpy of nanoparticles to rods or coils, and the effect of the liquid crystalline rod.

Novel Amphiphilic Dendronized Copolymers Formed by Enzyme-Mediated "Green" Polymerization

This study reports the first enzyme-mediated polymerization of dendritic macromonomers. The enzyme substrates are prepared by "click" conjugation between tyrosine and hydrophilic triethylene glycol (TrEG)-based dendrons of three generations (G1, G2, and G3). The resulting enzyme-polymerizable dendrons are defect-free as revealed by mass spectrometry, size-exclusion chromatography, and spectroscopic techniques. The phenol-containing macromonomers are water soluble and their polymerizations into dendronized polymers (denpols) are catalyzed by laccase (an oxidoreductase) under benign conditions (45 °C and aqueous medium at pH = 4.0) with copolymer yields between 30 and 40%. The resulting denpols consist of unnatural poly(tyrosine) backbones and dendritic poly(ether-ester) side chains and have molecular masses up to ∼13 000 Da (generation 1), ∼20 000 Da (generation 2), and ∼36 000 Da (generation 3) determined by matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) analyses. They display amphiphilic properties and self-assemble in aqueous solutions to form aggregates with generation-dependent morphologies.

Bending Behavior and Directed Self-Assembly of Rod-Coil Block Copolymers

The formation of zigzags, chevrons, Y-junctions, and line segments is demonstrated in thin films formed from cylindrical morphology silicon-containing conformationally asymmetric rod-coil diblock copolymers and triblock terpolymers under solvent annealing. Directed self-assembly of the block copolymers within trenches yields well-ordered cylindrical microdomains oriented either parallel or transverse to the sidewalls depending on the chemical functionalization of the sidewalls, and the location and structure of concentric bends in the cylinders is determined by the shape of the trenches. The innate etching contrast, the spontaneous sharp bends and junctions, and the range of demonstrated periodicity and line/space ratios make these conformationally asymmetric rod-coil polymers attractive for nanoscale pattern generation.

Dimension control on self-assembly of a crystalline core-forming polypeptoid block copolymer: 1D nanofibers versus 2D nanosheets

The balance between the crystallization and solubility of the block copolymer dominates the nanostructures.

Hierarchical self-assembly of miktoarm star copolymers with pathway complexity

The self-assembly of amphiphilic miktoarm star copolymers shows hierarchical pathway complexity from molecular building blocks to miktoarm stars to micellar nano-objects to complex hierarchical assemblies.

2D Chiral Stripe Nanopatterns Self-Assembled from Rod-Coil Block Copolymers on Microstripes

Chiral nanoarchitectures usually possess unique and intriguing properties. However, the construction of 2D chiral nanopatterns through polymer self-assembly is a challenge. Reported herein is the formation of chiral stripe nanopatterns through surface self-assembly of polypeptide-based rod-coil block copolymers on microstripes. The nanostripes align oblique to the boundary of the microstripes, resulting in the chirality of the nanopatterns. The chirality of the nanopatterns is closely related to the width of the microstripes, i.e., a narrower width results in higher chirality. Besides, the chiral sense of the nanopatterns can be regulated by the chirality of the polypeptide blocks. This work demonstrates the transmission of chirality from polymer to nanoarchitecture on a confined surface, which can guide the preparation of nanopatterns with tuned chiral features.

Continuous Curvature Change into Controllable and Responsive Onion-like Vesicles by Rigid Sphere-Rod Amphiphiles

We observe the formation of highly controllable and responsive onion-like vesicles by using rigid sphere-rod amphiphilic hybrid macromolecules, composed of charged, hydrophilic Keggin-type clusters (spheres) and hydrophobic rod-like oligofluorenes (OFs). Unlike the commonly used approach, which mainly relies on chain bending of flexible molecules to satisfy different curvatures in onion-like vesicles, the rigid hybrids form flexible interdigitations by tuning the angles between OFs, leading to the formation of bilayers with different sizes. The self-assembled vesicles possess complete onion-like structures from most inner to outer layers, and their size (layer number) can be accurately manipulated by different solution conditions including solvent polarity, ionic strength, temperature, and hybrid concentration, with fixed interbilayer distance under all conditions. Moreover, the vesicle size (layer number) shows excellent reversibility to the change of temperature. The charged feature of spheres, rod length, and overall hybrid architecture shows significant effects on the formation of such onion-like vesicles.

Soft-Matter Nanotubes: A Platform for Diverse Functions and Applications

Self-assembled organic nanotubes made of single or multiple molecular components can be classified into soft-matter nanotubes (SMNTs) by contrast with hard-matter nanotubes, such as carbon and other inorganic nanotubes. To date, diverse self-assembly processes and elaborate template procedures using rationally designed organic molecules have produced suitable tubular architectures with definite dimensions, structural complexity, and hierarchy for expected functions and applications. Herein, we comprehensively discuss every functions and possible applications of a wide range of SMNTs as bulk materials or single components. This Review highlights valuable contributions mainly in the past decade. Fifteen different families of SMNTs are discussed from the viewpoints of chemical, physical, biological, and medical applications, as well as action fields (e.g., interior, wall, exterior, whole structure, and ensemble of nanotubes). Chemical applications of the SMNTs are associated with encapsulating materials and sensors. SMNTs also behave, while sometimes undergoing morphological transformation, as a catalyst, template, liquid crystal, hydro-/organogel, superhydrophobic surface, and micron size engine. Physical functions pertain to ferro-/piezoelectricity and energy migration/storage, leading to the applications to electrodes or supercapacitors, and mechanical reinforcement. Biological functions involve artificial chaperone, transmembrane transport, nanochannels, and channel reactors. Finally, medical functions range over drug delivery, nonviral gene transfer vector, and virus trap.

Novel amphiphilic graft block azobenzene-containing copolymer with polypeptide block: synthesis, self-assembly and photo-responsive behavior

Well-defined amphiphilic graft block azobenzene-containing copolymer with polypeptide block was synthesized via a combination of copper-mediated atom transfer radical polymerization (ATRP), ring-opening polymerization and click reaction. The alkyne-terminated poly[6-(4-methoxy-azobenzene-4′-oxy)hexyl methacrylate] (PAzoMA) was synthesized by ATRP with a bromine-containing alkyne bifunctional initiator, and the azido-terminated poly(γ-2-chloroethyl-l-glutamate) (PCELG) was synthesized by ROP of γ-2-chloroethyl-l-glutamate-N-carboxyanhydride (CELG-NCA), then the two homopolymers were conjugated by click reaction to afford block azobenzene-containing copolymer PAzoMA-b-PCELG. The chloro groups in PCELG block were transformed into azido groups via azide reactions, and the alkyne-terminated MPEG was grafted to the polypeptide block to afford the final product PAzoMA-b-poly((l-glutamate)-graft-methoxy poly(ethylene glycol)) (PAzoMA-b-(PELG-g-MPEG)) by click reaction. Giant vesicles (micrometer size) were obtained from the amphiphilic graft block copolymer PAzoMA-b-(PELG-g-MPEG) through a solution self-assembly due to the rigid PAzoMA chains and polypeptide chains with the α-helical structure. The investigation of the photo-isomerization behavior of PAzoMA-b-(PELG-g-MPEG) in solution and in vesicular solution showed trans–cis isomerization in solution was quicker than that in vesicular solution and azobenzene J-aggregates in the vesicle solution were only observed. The formation mechanisms of the vesicles were also explored. The research results may provide guidelines for the study of complex copolymers containing different types of rigid chains.

Giant vesicles (micrometer size) were prepared from novel amphiphilic graft block azobenzene-containing copolymer with polypeptide block synthesized via a combination of ATRP, ROP and click reaction.

Improved synthesis and application of conjugation-amenable polyols from d-mannose

A series of polyhydroxyl sulfides and triazoles was prepared by reacting allyl and propargyl d-mannose derivatives with selected thiols and azides in thiol–ene and Huisgen click reactions. Conformational analysis by NMR spectroscopy proved that the intrinsic rigidity and linear conformation of the mannose derived polyol backbone is retained in the final click products in solution. Single crystal X-ray structure determination of one of the compounds prepared further verified that the linear conformation of the polyol segment is also retained in the solid state. In addition, an improved method for direct Barbier-type propargylation of unprotected d-mannose is reported. The new reaction protocol, involving tin-mediated propargylation in an acetonitrile-water mixture, provides access to multigram quantities of the desired, valuable alkyne polyol without relying on protecting group manipulations or chromatographic purification.

An improved method for the propargylation of d-mannose and application of the rod-like polyol and its allylated analogue in click reactions is described.

Self-assembly of rod-coil block copolymers on a substrate into micrometer-scale ordered stripe nanopatterns

Micrometer-scale ordered stripe nanopatterns are readily constructed through an adsorption-assembly of rod-coil block copolymers on the substrate.

Synthesis, thermoresponsivity and multi-tunable hierarchical self-assembly of multi-responsive (AB)mC miktobrush-coil terpolymers

Stimuli-responsive miktobrush-coil terpolymers can exhibit unique physical properties and hierarchical self-assembly behaviors dependent on composition, concentration and external stimuli.

The crystal packing, morphology and hydrophobicity of polyoxometalate-based amphiphilic materials

Crystal structures of polyoxometalate-based amphiphiles with multiple alkyl tails were characterized by single crystal X-ray diffraction to reveal the relationship between morphologies and manner of packing.

The self-assembly behavior of polymer brushes induced by the orientational ordering of rod backbones: a dissipative particle dynamics study

This work proposed the “rod–coil competitive mechanism” for the self-assembly of polymer brushes with rod–coil backbones.

Harnessed Dopant Block Copolymers Assist Decorating Membrane Pores: A Dissipative Particle Dynamics Study

Self-assembly of asymmetric block copolymers (BCPs) around active pore edges has emerged as an important strategy to produce smart membranes with tunable pathways for solute transport. However, thus far, it is still challenging to manipulate pore shape and functionality for directional transformation under external stimuli. Here, a versatile strategy by mesoscale simulations to design stimuli-responsive pores with various edge decorations in hybrid membranes is reported. Dopant BCPs are used as decorators to stabilize pore edges and extend their function in reconfiguring pores in response to repeated membrane stretching/shrinking caused by external stimuli. The decoration morphologies are predictable since the assemblies of dopant BCPs around pore edges are closely related to their self-assemblies in solution. The coassembly between different BCPs in the hybrid membrane for the control of pore morphology is featured, and the parameter settings, including block incompatibility and molecular architecture for the construction of a specific pore, are determined. Results show that harnessed dopant BCPs in the hybrid membrane can enhance pore formation and induce directional pore shape and functionality transformation. Diversified pore decorations exhibit potential that can be further explored in selective solute transport and the design of stimuli-responsive smart nanodevices.

Elastic properties of liquid-crystalline bilayers self-assembled from semiflexible-flexible diblock copolymers

The mechanical response and shape of self-assembled bilayer membranes depend crucially on their elastic properties. Most of the studies focused on the elastic properties of fluid membranes, despite the ubiquitous presence of membranes with liquid-crystalline order. Here the elastic properties of liquid-crystalline bilayers self-assembled from diblock copolymers composed of a semiflexible block are studied theoretically. Specifically, the self-consistent field theory (SCFT) is applied to a model system composed of semiflexible-flexible diblock copolymers dissolved in flexible homopolymers that act as solvents. The free energy of self-assembled tensionless bilayer membranes in three different geometries, i.e. planar, cylindrical and spherical, is obtained by solving the SCFT equations using a hybrid method, in which the orientation-dependent functions are treated using the spherical harmonics, whereas the position-dependent operators are treated using the compact difference schemes. The bending modulus κ_M and Gaussian modulus κ_G of the bilayer are extracted from the free energies. The effects of the molecular parameters of the system, such as the chain rigidity and the orientational interaction, are systematically examined.

Amphiphilic multicomponent molecular brushes

Multicomponent molecular brushes containing amphiphilic polymer moieties are promising objects of research of macromolecular chemistry. The development of stimulus-responsive systems sensitive to changes in environmental parameters, based on the molecular brushes, opens up new possibilities for their applications in medicine, biochemistry and microelectronics. The review presents the current understanding of the structures of main types of amphiphilic multicomponent brushes, depending on the chemical nature and type of coupling of the backbone and side chains. The approaches to the controlled synthesis of multicomponent molecular brushes of different architecture are analyzed. Self-assembly processes of multicomponent molecular brushes in selective solvents are considered.

The bibliography includes 259 references.

Isotactic-Polypropylene/Atactic-Polystyrene Miktoarm Star Copolymers: Synthesis and Aggregation Morphology

In this work, a series of isotactic-polypropylene/atactic-polystyrene (iPP/aPS) miktoarm star copolymers, PxSy, was synthesized via an arm-first approach. Varied star macromolecule architectures were fabricated by designing the arm length and the arm numbers (x and y). These miktoarm stars were able to form micelles in selective solvent (N,N'-dimethylformamide (DMF)), in which the insoluble iPP arms formed the core and the soluble aPS arms formed the shell. The miktoarm polymers aggregated to micro-nanoscale binary structures (MNBSes) in the casting process, and their morphologies, including the MNBS shape and size, were greatly influenced by the PxSy architectures. The MNBSes endowed the material surface with superhydrophobic performance with a water contact angle of 157.0° and a sliding angle of 1.5°.

Temperature-responsive self-assembled nanostructures from lysine-based surfactants with high chain length asymmetry: from tubules and helical ribbons to micelles and vesicles

Stimuli-sensitive self-assembled nanostructures are of great relevance for the templating of nanomaterials and the design of efficient systems for the controlled delivery of molecules. Amino acid-based surfactants often display such fascinating self-assembly due to a combination of molecular features such as critical packing parameter, chirality and H-bonding interactions. Herein, we focus on a family of newly synthesized double-chained alkylcarboxylates derived from l-lysine, and designated by 8Lysn, mLys8, with n, m = 12, 14 and 16, and 12Lys16 and 16Lys12, where the numbers represent the number of C atoms in each hydrocarbon chain. The effects of the chain length asymmetry and structural isomerism of the surfactants on their interfacial properties, thermal behavior and self-assembly in water were investigated by a comprehensive toolbox, including surface tension, DSC, imaging (light microscopy, SEM, TEM and AFM) and SAXS. All the surfactants below their Krafft temperature self-organize into tubular structures of various morphologies (flat structures, twisted and coiled ribbons and hollow tubes), forming hydrogels at low surfactant concentration. Upon the solubilization phase transition, micelles or vesicles are formed depending on the surfactant structure, and the tubule-micelle or tubule-vesicle transition is thermoreversible. A molecular-level rationalization of the observed self-assembly and phase transition features is put forth.

Single-chain tethered nanoparticles with tunable softness: scalable synthesis and unique self-assembly behavior

A scalable method to prepare single-chain tethered nanoparticles with tunable softness, which results in unique self-assembly behaviors.

Solution self-assembly behavior of rod-alt-coil alternating copolymers via simulations

The self-assembly behaviors of rod-alt-coil alternating copolymers were systematically investigated by employing dissipative particle dynamics simulations.

Cooperation of Amphiphilicity and Smectic Order in Regulating the Self-Assembly of Cholesterol-Functionalized Brush-Like Block Copolymers

Nanoparticle morphology significantly affects the application of nanometer-scale materials. Understanding nanoparticle formation mechanisms and directing morphological control in nanoparticle self-assembly processes have received wide attention. Herein, a series of brush-like amphiphilic liquid crystalline block copolymers, PChEMA _m- b-POEGMA _n, containing cholesteryl mesogens with different hydrophobic/hydrophilic block ratios were designed and synthesized. The self-assembly behaviors of the resulting PChEMA _m- b-POEGMA _n block copolymers in different solvents (tetrahydrofuran/H₂O, 1,4-dioxane/H₂O, and N, N-dimethylformamide) were investigated in detail. Desirable micellar aggregates with well-organized architectures, including short cylindrical micelles, nanofibers, fringed platelets, and ellipsoidal vesicles with smectic micellar cores, were observed in 1,4-dioxane/H₂O with an increasing hydrophobic block ratio. Although both amphiphilicity and smectic order governed the self-assembly, these two factors were differently balanced in the different solvents. This unique supramolecular system provides a new strategy for the design of advanced functional nanomaterials with tunable morphologies.

Morphological Control of Coil-Rod-Coil Molecules Containing m-Terphenyl Group: Construction of Helical Fibers and Helical Nanorings in Aqueous Solution

Rod-coil molecules, composed of rigid segments and flexible coil chains, have a strong intrinsic ability to self-assemble into diverse supramolecular nanostructures. Herein, we report the synthesis and the morphological control of a new series of amphiphilic coil-rod-coil molecular isomers 1-2 containing flexible oligoether chains. These molecules are comprised of m-terphenyl and biphenyl groups, along with triple bonds, and possess lateral methyl or butyl groups at the coil or rod segments. The results of this study suggest that the morphology of supramolecular aggregates is significantly influenced by the lateral alkyl groups and by the sequence of the rigid fragments in the bulk and in aqueous solution. The molecules with different coils self-assemble into lamellar or oblique columnar structures in the bulk state. In aqueous solution, molecule 1a, with a lack of lateral groups, self-assembled into large strips of sheets, whereas exquisite nanostructures of helical fibers were obtained from molecule 1b, which incorporated lateral methyl groups between the rod and coil segments. Interestingly, molecule 1c with lateral butyl and methyl groups exhibited a strong self-organizing capacity to form helical nanorings. Nanoribbons, helical fibers, and small nanorings were simultaneously formed from the 2a-2c, which are structural isomers of 1a, 1b, and 1c. Accurate control of these supramolecular nanostructures can be achieved by tuning the synergistic interactions of the noncovalent driving force with hydrophilic-hydrophobic interactions in aqueous solution.

Nonspherical Liquid Crystalline Assemblies with Programmable Shape Transformation

Liquid crystalline (LC) assemblies with tailored shape and programmable shape transformation were prepared via polymerization-induced self-assembly. The influence of polymerization temperature and solvent on the shape of the LC assemblies indicated that shape of the LC assemblies could be delicately regulated by the repulsive interaction among the solvophilic chains and LC ordering. Programmable shape transformation of ellipsoidal LC assemblies was achieved, taking advantage of the smectic-to-isotropic phase transition. The ellipsoidal assemblies could remain ellipsoids or transform to faceted spheres and spheres, depending on the temperature procedure used. Besides, the generated spheres could be reshaped to ellipsoids with high shape recovery ratio. Small angle X-ray scattering study indicated that the interplay of the reversible smectic-to-isotropic phase transition and kinetic trapping underpins the programmed shape transformation. As a general approach to LC assemblies with programmable shape transformation, our strategy would provide a reliable platform for nanoactuators, nanomotors, and adaptive colloidal devices.