Ligand Equilibrium Influences Photoluminescence Blinking in CsPbBr3: A Change Point Analysis of Widefield Imaging Data

Photoluminescence intermittency remains one of the biggest challenges in realizing perovskite quantum dots (QDs) as scalable single photon emitters. We compare CsPbBr3 QDs capped with different ligands, lecithin, and a combination of oleic acid and oleylamine, to elucidate the role of surface chemistry on photoluminescence intermittency. We employ widefield photoluminescence microscopy to sample the blinking behavior of hundreds of QDs. Using change point analysis, we achieve the robust classification of blinking trajectories, and we analyze representative distributions from large numbers of QDs (Nlecithin = 1308, Noleic acid/oleylamine = 1317). We find that lecithin suppresses blinking in CsPbBr3 QDs compared with oleic acid/oleylamine. Under common experimental conditions, lecithin-capped QDs are 7.5 times more likely to be nonblinking and spend 2.5 times longer in their most emissive state, despite both QDs having nearly identical solution photoluminescence quantum yields. We measure photoluminescence as a function of dilution and show that the differences between lecithin and oleic acid/oleylamine capping emerge at low concentrations during preparation for single particle experiments. From experiment and first-principles calculations, we attribute the differences in lecithin and oleic acid/oleylamine performance to differences in their ligand binding equilibria. Consistent with our experimental data, density functional theory calculations suggest a stronger binding affinity of lecithin to the QD surface compared to oleic acid/oleylamine, implying a reduced likelihood of ligand desorption during dilution. These results suggest that using more tightly binding ligands is a necessity for surface passivation and, consequently, blinking reduction in perovskite QDs used for single particle and quantum light experiments.

Perovskite Quantum Heterostructure Constructed by Halide Mixing between a Single CsPbI3 Nanocrystal and an Individual CsPbBr3 Microplate

Ion migration is significantly enhanced in lead-halide perovskites with a soft crystal lattice, which can promote the formation of a heterogeneous interface between two such materials with different halide-anion compositions. Here we have deposited a single CsPbI3 nanocrystal (NC) on top of an individual CsPbBr3 microplate to create a mixed-halide CsPbBrxI3-x (0 < x < 3) NC by means of the anion exchange process. The formation of a CsPbBrxI3-x/CsPbBr3 heterostructure is confirmed by the much-enlarged geometric volume of the CsPbBrxI3-x NC as compared to the original CsPbI3 one, as well as by its capability of receiving photogenerated excitons from the CsPbBr3 microplate with a larger bandgap energy. The quantum nature of this heterostructure is reflected from single-photon emission of the composing CsPbBrxI3-x NC, which can also be bulk-like during phase segregation to demonstrate a red shift in the photoluminescence peak that is opposite to the common trend observed in smaller-sized mixed-halide NCs.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Nanoscale imaging of quantum dot dimers using time-resolved super-resolution microscopy combined with scanning electron microscopy

Time-resolved super-resolution microscopy was used in conjunction with scanning electron microscopy to image individual colloidal CdSe/CdS semiconductor quantum dots (QD) and QD dimers. The photoluminescence (PL) lifetimes, intensities, and structural parameters were acquired with nanometer scale spatial resolution and sub-nanosecond time resolution. The combination of these two techniques was more powerful than either alone, enabling us to resolve the PL properties of individual QDs within QD dimers as they blinked on and off, measure interparticle distances, and identify QDs that may be participating in energy transfer. The localization precision of our optical imaging technique was ∼3 nm, low enough that the emission from individual QDs within the dimers could be spatially resolved. While the majority of QDs within dimers acted as independent emitters, at least one pair of QDs in our study exhibited lifetime and intensity behaviors consistent with resonance energy transfer from a shorter lifetime and lower intensity donor QD to a longer lifetime and higher intensity acceptor QD. For this case, we demonstrate how the combined super-resolution optical imaging and scanning electron microscopy data can be used to characterize the energy transfer rate.

Memory in quantum dot blinking

The photoluminescence intermittency (blinking) of quantum dots is interesting because it is an easily measured quantum process whose transition statistics cannot be explained by Fermi's golden rule. Commonly, the transition statistics are power-law distributed, implying that quantum dots possess at least trivial memories. By investigating the temporal correlations in the blinking data, we demonstrate with high statistical confidence that there is nontrivial memory between the on and off brightness duration data of blinking quantum dots. We define nontrivial memory to be statistical complexity greater than one. We show that this memory cannot be discovered using the transition distribution. We show by simulation that this memory does not arise from standard data manipulations. Finally, we conclude that at least three physical mechanisms can explain the measured nontrivial memory: (1) storage of state information in the chemical structure of a quantum dot; (2) the existence of more than two intensity levels in a quantum dot; and (3) the overlap in the intensity distributions of the quantum dot states, which arises from fundamental photon statistics.

Progress and perspectives in single-molecule optical spectroscopy

We review some of the progress of single-molecule optical experiments in the past 20 years and propose some perspectives for the coming years. We particularly focus on methodological advances in fluorescence, super-resolution, photothermal contrast, and interferometric scattering and briefly discuss a few of the applications. These advances have enabled the exploration of new emitters and quantum optics; the chemistry and biology of complex heterogeneous systems, nanoparticles, and plasmonics; and the detection and study of non-fluorescing and non-absorbing nano-objects. We conclude by proposing some ideas for future experiments. The field will move toward more and better signals of a broader variety of objects and toward a sharper view of the surprising complexity of the nanoscale world of single (bio-)molecules, nanoparticles, and their nano-environments.

Measuring Exciton Fine-Structure in Randomly Oriented Perovskite Nanocrystal Ensembles Using Nonlinear Optical Spectroscopy: Theory

Lead halide perovskite nanocrystals (PNCs) exhibit unique optoelectronic properties, many of which originate from a purported bright-triplet exciton fine-structure. A major impediment to measuring this fine-structure is inhomogeneous spectral broadening, which has limited most experimental studies to single-nanocrystal spectroscopies. It is shown here that the linearly polarized single-particle selection rules in PNCs are preserved in nonlinear spectroscopies of randomly oriented ensembles. Simulations incorporating rotational averaging demonstrate that techniques such as transient absorption and two-dimensional coherent spectroscopy are capable of resolving exciton fine-structure in PNCs, even in the presence of inhomogeneous broadening and orientation disorder.

Manganese doping for enhanced magnetic brightening and circular polarization control of dark excitons in paramagnetic layered hybrid metal-halide perovskites

Materials combining semiconductor functionalities with spin control are desired for the advancement of quantum technologies. Here, we study the magneto-optical properties of novel paramagnetic Ruddlesden-Popper hybrid perovskites Mn:(PEA)2PbI4 (PEA = phenethylammonium) and report magnetically brightened excitonic luminescence with strong circular polarization from the interaction with isolated Mn2+ ions. Using a combination of superconducting quantum interference device (SQUID) magnetometry, magneto-absorption and transient optical spectroscopy, we find that a dark exciton population is brightened by state mixing with the bright excitons in the presence of a magnetic field. Unexpectedly, the circular polarization of the dark exciton luminescence follows the Brillouin-shaped magnetization with a saturation polarization of 13% at 4 K and 6 T. From high-field transient magneto-luminescence we attribute our observations to spin-dependent exciton dynamics at early times after excitation, with first indications for a Mn-mediated spin-flip process. Our findings demonstrate manganese doping as a powerful approach to control excitonic spin physics in Ruddlesden-Popper perovskites, which will stimulate research on this highly tuneable material platform with promise for tailored interactions between magnetic moments and excitonic states.

Revealing the Exciton Fine Structure in Lead Halide Perovskite Nanocrystals

Lead-halide perovskite nanocrystals (NCs) are attractive nano-building blocks for photovoltaics and optoelectronic devices as well as quantum light sources. Such developments require a better knowledge of the fundamental electronic and optical properties of the band-edge exciton, whose fine structure has long been debated. In this review, we give an overview of recent magneto-optical spectroscopic studies revealing the entire excitonic fine structure and relaxation mechanisms in these materials, using a single-NC approach to get rid of their inhomogeneities in morphology and crystal structure. We highlight the prominent role of the electron-hole exchange interaction in the order and splitting of the bright triplet and dark singlet exciton sublevels and discuss the effects of size, shape anisotropy and dielectric screening on the fine structure. The spectral and temporal manifestations of thermal mixing between bright and dark excitons allows extracting the specific nature and strength of the exciton–phonon coupling, which provides an explanation for their remarkably bright photoluminescence at low temperature although the ground exciton state is optically inactive. We also decipher the spectroscopic characteristics of other charge complexes whose recombination contributes to photoluminescence. With the rich knowledge gained from these experiments, we provide some perspectives on perovskite NCs as quantum light sources.

Physical insights into protection effect of conjugated polymers by natural antioxidants

Conjugated polymers (CPs) known as organic semiconductors have been broadly applied in photovoltaic and light emitting devices due to their easy fabrication and flexibility. However, one of the bottlenecks limiting the application of CPs is their poor photostability upon continuous excitation which is one of the crucial parameters of CPs. How to improve the photostability of CPs is always one of the key questions in this field. In this work, we found that the photostability of poly(3-hexylthiophene-2,5-diyl) (P3HT) molecules can be largely improved by addition of vitamin E (VE) in bulk solution, solid films and single molecules. In solution and films, VE can not only significantly retard the photodegradation of P3HT but also enhance the fluorescence intensity. For individual P3HT molecules, with increasing VE concentrations, the on-time duration increases and the off-time duration becomes shorter. VE as natural antioxidants can not only donate electrons to the long-lived charged species but also quench the triplet states of CPs via energy transfer accelerating the depopulation process back to the ground state. The short duration time of the charged species and the triplet states provides higher fluorescence intensity. Furthermore, VE can also directly react with singlet oxygen or other reactive oxygen species (ROS) preventing them from reacting with CPs. These results not only provide an efficient strategy for improving the photostability of conjugated polymers in solution and films, but also shed light on better understanding the photophysics of conjugated polymers at single-molecule level.

Semiconductor Quantum Dots as Components of Photoactive Supramolecular Architectures

Luminescent quantum dots (QDs) are colloidal semiconductor nanocrystals consisting of an inorganic core covered by a molecular layer of organic surfactants. Although QDs have been known for more than thirty years, they are still attracting the interest of researchers because of their unique size-tunable optical and electrical properties arising from quantum confinement. Moreover, the controlled decoration of the QD surface with suitable molecular species enables the rational design of inorganic-organic multicomponent architectures that can show a vast array of functionalities. This minireview highlights the recent progress in the use of surface-modified QDs - in particular, those based on cadmium chalcogenides - as supramolecular platforms for light-related applications such as optical sensing, triplet photosensitization, photocatalysis and phototherapy.

In Situ Observation of Emission Behavior during Anion-Exchange Reaction of a Cesium Lead Halide Perovskite Nanocrystal at the Single-Nanocrystal Level

Postsynthesis anion-exchange reaction of cesium lead halide (CsPbX₃; X = Cl, Br, and I) perovskite nanocrystals (NCs) has emerged as a unique strategy to control band gap. Recently, the partially anion-exchanged CsPb(Br/I)₃ NC was reported to form an inhomogeneously alloyed heterostructure, which could possibly form some emission sites depending on the halide composition in the single NC. In this work, we observed the in situ emission behavior of single CsPb(Br/I)₃ NCs during the anion-exchange reaction. Photon-correlation measurements of the single NCs revealed that the mixed halide CsPb(Br/I)₃ NC exhibited single-photon emission. Even when irradiated with an intense excitation laser, the single NC exhibited single-photon emission with a photoluminescence spectrum of a single peak. These results suggested that the heterohalide compositions of the CsPb(Br/I)₃ NC do not form any emission sites with different band gap energies; instead, the NC forms emission sites with uniform band gap energy as a whole NC via quantum confinement.

Observation of Electron Shakeup in CdSe/CdS Core/Shell Nanoplatelets

While ensembles of CdSe nanoplatelets (NPLs) show remarkably narrow photoluminescence line widths at room temperature, adding a CdS shell to increase their fluorescence efficiency and photostability causes line width broadening. Moreover, ensemble emission spectra of CdSe/CdS core/shell NPLs become strongly asymmetric at cryogenic temperatures. If the origin of these effects were understood, this could potentially lead to stable core/shell NPLs with narrower emission, which would be advantageous for applications. To move in this direction, we report time-resolved emission spectra of individual CdSe/CdS core/shell NPLs at 4 K. We observe surprisingly complex emission spectra that contain multiple spectrally narrow emission features that change during the experiment. With machine-learning algorithms, we can extract characteristic peak energy differences in these spectra. We show that they are consistent with electron "shakeup lines" from negatively charged trions. In this process, an electron-hole pair recombines radiatively but gives part of its energy to the remaining electron by exciting it into a higher single-electron level. This "shakeup" mechanism is enabled in our NPLs due to strong exciton binding and weak lateral confinement of the charge carriers. Time-resolved single-photon-counting measurements and numerical calculations suggest that spectral jumps in the emission features originate from fluctuations in the confinement potential caused by microscopic structural changes on the NPL surface (e.g., due to mobile surface charges). Our results provide valuable insights into line width broadening mechanisms in colloidal NPLs.

Non-Markovian Exciton-Phonon Interactions in Core-Shell Colloidal Quantum Dots at Femtosecond Timescales

We perform two-dimensional coherent spectroscopy on CdSe/CdZnS core-shell colloidal quantum dots at cryogenic temperatures. In the two-dimensional spectra, sidebands due to electronic coupling with CdSe lattice LO-phonon modes are observed to have evolutions deviating from the exponential dephasing expected from Markovian spectral diffusion, which is instantaneous and memoryless. Comparison to simulations provides evidence that LO-phonon coupling induces energy-gap fluctuations on the finite timescales of nuclear motion. The femtosecond resolution of our technique probes exciton dynamics directly on the timescales of phonon coupling in nanocrystals.

The ground exciton state of formamidinium lead bromide perovskite nanocrystals is a singlet dark state

Lead halide perovskites have emerged as promising new semiconductor materials for high-efficiency photovoltaics, light-emitting applications and quantum optical technologies. Their luminescence properties are governed by the formation and radiative recombination of bound electron-hole pairs known as excitons, whose bright or dark character of the ground state remains unknown and debated. While symmetry analysis predicts a singlet non-emissive ground exciton topped with a bright exciton triplet, it has been predicted that the Rashba effect may reverse the bright and dark level ordering. Here, we provide the direct spectroscopic signature of the dark exciton emission in the low-temperature photoluminescence of single formamidinium lead bromide perovskite nanocrystals under magnetic fields. The dark singlet is located several millielectronvolts below the bright triplet, in fair agreement with an estimation of the long-range electron-hole exchange interaction. Nevertheless, these perovskites display an intense luminescence because of an extremely reduced bright-to-dark phonon-assisted relaxation.

Asymmetrically strained quantum dots with non-fluctuating single-dot emission spectra and subthermal room-temperature linewidths

The application of colloidal semiconductor quantum dots as single-dot light sources still requires several challenges to be overcome. Recently, there has been considerable progress in suppressing intensity fluctuations (blinking) by encapsulating an emitting core in a thick protective shell. However, these nanostructures still show considerable fluctuations in both emission energy and linewidth. Here we demonstrate type-I core/shell heterostructures that overcome these deficiencies. They are made by combining wurtzite semiconductors with a large, directionally anisotropic lattice mismatch, which results in strong asymmetric compression of the emitting core. This modifies the structure of band-edge excitonic states and leads to accelerated radiative decay, reduced exciton-phonon interactions, and suppressed coupling to the fluctuating electrostatic environment. As a result, individual asymmetrically strained dots exhibit highly stable emission energy (<1 meV standard deviation) and a subthermal room-temperature linewidth (~20 meV), concurrent with nearly nonblinking behaviour, high emission quantum yields, and a widely tunable emission colour.

Infrared Quantum Dots: Progress, Challenges, and Opportunities

Infrared technologies provide tremendous value to our modern-day society. The need for easy-to-fabricate, solution-processable, tunable infrared active optoelectronic materials has driven the development of infrared colloidal quantum dots, whose band gaps can readily be tuned by dimensional constraints due to the quantum confinement effect. In this Perspective, we summarize recent progress in the development of infrared quantum dots both as infrared light emitters ( e.g., in light-emitting diodes, biological imaging, etc.) as well as infrared absorbers ( e.g., in photovoltaics, solar fuels, photon up-conversion, etc.), focusing on how fundamental breakthroughs in synthesis, surface chemistry, and characterization techniques are facilitating the implementation of these nanostructures into exploratory device architectures as well as in emerging applications. We discuss the ongoing challenges and opportunities associated with infrared colloidal quantum dots.

Statistical Learning of Discrete States in Time Series

Time series obtained from time-dependent experiments contain rich information on kinetics and dynamics of the system under investigation. This work describes an unsupervised learning framework, along with the derivation of the necessary analytical expressions, for the analysis of Gaussian-distributed time series that exhibit discrete states. After the time series has been partitioned into segments in a model-free manner using the previously developed change-point (CP) method, this protocol starts with an agglomerative hierarchical clustering algorithm to classify the detected segments into possible states. The initial state clustering is further refined using an expectation-maximization (EM) procedure, and the number of states is determined by a Bayesian information criterion (BIC). Also introduced here is an achievement scalarization function, usually seen in artificial intelligence literature, for quantitatively assessing the performance of state determination. The statistical learning framework, which is comprised of three stages, detection of signal change, clustering, and number-of-state determination, was thoroughly characterized using simulated trajectories with random intensity segments that have no underlying kinetics, and its performance was critically evaluated. The application to experimental data is also demonstrated. The results suggested that this general framework, the implementation of which is based on firm theoretical foundations and does not require the imposition of any kinetics model, is powerful in determining the number of states, the parameters contained in each state, as well as the associated statistical significance.

Total Internal Reflection-Based Extinction Spectroscopy of Single Nanoparticles

Herein we report a reflection-mode total internal reflection microscopy (TIRM) to measure the extinction spectrum of individual dielectric, plasmonic, or light-absorbing nanoparticles, and to differentiate absorption and scattering components from the total optical output. These capabilities were enabled via illuminating the sample with evanescent wave of which the lightpath length was comparable with the size of single nanoparticles, leading to a dramatically improved reflectance change (ΔI/I₀ ) up to tens of percent. It was further found that scattering and absorption of light contributed to bright and dark centroids, respectively, in the optical patterns of single nanoparticles, allowing to distinguish scattering and absorption components from the extinction spectrum by the use of an appropriate image processing method. In addition, wide-field feature of TIRM enabled the studies on tens of nanoparticles simultaneously with gentle illumination.

Fundamental Properties in Colloidal Quantum Dots

A multidisciplinary approach for the production and characterization of colloidal quantum dots, which show great promise for implementation in modern optoelectronic applications, is described. The approach includes the design and formation of unique core/shell structures with alloy-composed layers between the core and the shell. Such structures eliminate interfacial defects and suppress the Auger process, thus reducing the known fluorescence blinking and endowing the quantum dots with robust chemical and spectral stability. The unique design enables the generation and sustained existence of single and multiple excitons with a defined spin-polarized emission recombination. The studies described herein implement the use of single-dot magneto-optical measurements and optically detected magnetic resonance spectroscopy, for direct identification of interfacial defects and for resolving exciton fine structure. The results are of paramount importance for a fundamental understanding of optical transitions in colloidal quantum dots, with an impact on appropriate materials design for practical applications.

Photon antibunching in a cluster of giant CdSe/CdS nanocrystals

When closely packed into a high-density film, semiconductor nanocrystals (NCs) can interact with each other to yield collective optical behaviours, which are normally difficult to characterize due to the ensemble average effect. Here we synthesized semiconductor NC clusters and performed single-particle spectroscopic measurements to probe the electronic couplings of several giant CdSe/CdS NCs contained in one cluster with nanometer-scale separations. Such a single cluster exhibits multiple emission peaks at the cryogenic temperature with nearly identical photoluminescence decay dynamics, suggesting that the Förster-type energy transfer does not occur among the composing NCs. Surprisingly, strong photon antibunching is still observed from a single cluster, which can be attributed to the Auger annihilation of photo-excited excitons from different NCs. The isolation of several nearby NCs interacting with the above novel mechanism has marked a solid progress towards a full understanding and an efficient control of the operation parameters in NC-based optoelectronic devices.

Imaging the chemical activity of single nanoparticles with optical microscopy

Chemical activity of single nanoparticles can be imaged and determined by monitoring the optical signal of each individual during chemical reactions with advanced optical microscopes. It allows for clarifying the functional heterogeneity among individuals, and for uncovering the microscopic reaction mechanisms and kinetics that could otherwise be averaged out in ensemble measurements.

Deciphering Charging Status, Absolute Quantum Efficiency, and Absorption Cross Section of Multicarrier States in Single Colloidal Quantum Dots

Upon photo- or electrical-excitation, colloidal quantum dots (QDs) are often found in multicarrier states due to multiphoton absorption, photocharging, or imbalanced carrier injection of the QDs. While many of these multicarrier states are observed in single-dot spectroscopy, their properties are not well studied due to random charging/discharging, emission intensity intermittency, and uncontrolled surface defects of single QDs. Here we report in situ deciphering of the charging status, precisely assessing the absorption cross section, and determining the absolute emission quantum yield of monoexciton and biexciton states for neutral, positively charged, and negatively charged single core/shell CdSe/CdS QDs. We uncover very different photon statistics of the three charge states in single QDs and unambiguously identify their charge signs together with the information on their photoluminescence decay dynamics. We then show their distinct photoluminescence saturation behaviors and evaluate the absolute values of absorption cross sections and quantum efficiencies of monoexcitons and biexcitons. We demonstrate that the addition of an extra hole or electron in a QD not only changes its emission properties but also varies its absorption cross section.

Neutral and Charged Exciton Fine Structure in Single Lead Halide Perovskite Nanocrystals Revealed by Magneto-optical Spectroscopy

Revealing the crystal structure of lead halide perovskite nanocrystals is essential for the optimization of stability of these emerging materials in applications such as solar cells, photodetectors, and light-emitting devices. We use magneto-photoluminescence spectroscopy of individual perovskite CsPbBr₃ nanocrystals as a unique tool to determine their crystal structure, which imprints distinct signatures in the excitonic sublevels of charge complexes at low temperatures. At zero magnetic field, the identification of two classes of photoluminescence spectra, displaying either two or three sublevels in their exciton fine structure, shows evidence for the existence of two crystalline structures, namely tetragonal D_4h and orthorhombic D_2h phases. Magnetic field shifts, splitting, and coupling of the sublevels provide a determination of the diamagnetic coefficient and valuable information on the exciton g-factor and its anisotropic character. Moreover, this spectroscopic study reveals the optical properties of charged excitons and allows the extraction of the electron and hole g-factors for perovskite systems.

Photoluminescence Intermittency and Photo-Bleaching of Single Colloidal Quantum Dot

Photoluminescence (PL) blinking of single colloidal quantum dot (QD)-PL intensity switching between different brightness states under constant excitation-and photo-bleaching are roadblocks for most applications of QDs. This progress report shall treat PL blinking and photo-bleaching both as photochemical events, namely, PL blinking as reversible and photo-bleaching being irreversible ones. Most studies on single-molecule spectroscopy of QDs in literature are related to PL blinking, which invites us to concentrate our discussions on the PL blinking, including its brief history in 20 years, analysis methods, competitive mechanisms and different strategies to battle it. In terms of suppression of the PL blinking, wavefunction confinement-confining photo-generated electron and hole within the core and inner portion of the shell of a core/shell QD-demonstrates significant advantages. This strategy yields nearly non-blinking QDs with their emission peaks covering most part of the visible window. As expected, the resulting QDs from this new strategy also show substantially improved anti-bleaching features.

Quantum-Dot Light-Emitting Diodes for Large-Area Displays: Towards the Dawn of Commercialization

Quantum dots are a unique class of emitters with size-tunable emission wavelengths, saturated emission colors, near-unity luminance efficiency, inherent photo- and thermal- stability and excellent solution processability. Quantum dots have been used as down-converters for back-lighting in liquid-crystal displays to improve color gamut, leading to the booming of quantum-dot televisions in consumer market. In the past few years, efficiency and lifetime of electroluminescence devices based on quantum dots achieved tremendous progress. These encouraging facts foreshadow the commercialization of quantum-dot light-emitting diodes (QLEDs), which promises an unprecedented generation of cost-effective, large-area, energy-saving, wide-color-gamut, ultra-thin and flexible displays. Here we provide a Progress Report, covering interdisciplinary aspects including material chemistry of quantum dots and charge-transporting layers, optimization and mechanism studies of prototype devices and processing techniques to produce large-area and high-resolution red-green-blue pixel arrays. We also identify a few key challenges facing the development of active-matrix QLED displays.

Strong plasmonic enhancement of biexciton emission: controlled coupling of a single quantum dot to a gold nanocone antenna

Multiexcitonic transitions and emission of several photons per excitation comprise a very attractive feature of semiconductor quantum dots for optoelectronics applications. However, these higher-order radiative processes are usually quenched in colloidal quantum dots by Auger and other nonradiative decay channels. To increase the multiexcitonic quantum efficiency, several groups have explored plasmonic enhancement, so far with moderate results. By controlled positioning of individual quantum dots in the near field of gold nanocone antennas, we enhance the radiative decay rates of monoexcitons and biexcitons by 109 and 100 folds at quantum efficiencies of 60 and 70%, respectively, in very good agreement with the outcome of numerical calculations. We discuss the implications of our work for future fundamental and applied research in nano-optics.

Interfacing Luminescent Quantum Dots with Functional Molecules for Optical Sensing Applications

Semiconductor quantum dots possess unique size-dependent electronic properties and are of high potential interest for the construction of functional nanodevices. Photoinduced electron- and energy-transfer processes between quantum dots and surface-bound molecular species open up attractive routes to implement chemical switching of luminescence, which is at the basis of luminescence sensing. In this article, we discuss the general principles underlying the rational design of this kind of multicomponent species. Successively, we illustrate a few prominent examples, taken from the recent literature, of luminescent chemosensors constructed by attaching molecular species to the surface of quantum dots.

Superior Optical Properties of Perovskite Nanocrystals as Single Photon Emitters

The power conversion efficiency of photovoltaic devices based on semiconductor perovskites has reached ∼20% after just several years of research efforts. With concomitant discoveries of other promising applications in lasers, light-emitting diodes, and photodetectors, it is natural to anticipate what further excitement these exotic perovskites could bring about. Here we report on the observation of single photon emission from single CsPbBr3 perovskite nanocrystals (NCs) synthesized from a facile colloidal approach. Compared with traditional metal-chalcogenide NCs, these CsPbBr3 NCs exhibit nearly 2 orders of magnitude increase in their absorption cross sections at similar emission colors. Moreover, the radiative lifetime of CsPbBr3 NCs is greatly shortened at both room and cryogenic temperatures to favor an extremely fast output of single photons. The above superior optical properties have paved the way toward quantum-light applications of perovskite NCs in various quantum information processing schemes.

Evidence in Support of Exciton to Ligand Vibrational Coupling in Colloidal Quantum Dots

The Perspective focuses on the investigation of an unresolved conflict in semiconductor colloidal quantum dots (CQDs) research, concerning the influence of the immediate surrounding on the optical properties of the materials. Today's advanced synthetic colloidal procedures offer formation of a high-quality inorganic crystallite, capped with various organic/inorganic molecular ligands. The Perspective aims to clarify whether exciton recombination processes in CQDs are influenced by the type of crystallite-ligand bonding and, moreover, whether these excitonic processes experience direct coupling to the ligands' vibrational modes. Most ligands used have redox characteristics whose functional groups are added on to the CQDs' surface via coordination, covalent or ionic bonding. The surface-ligand bonding introduces electronic states either above or below the intraband/interband energy gap, resulting in electronic passivation or in creation of trapping states that affect intraband and interband relaxation processes. Furthermore, crystalline electronic states may have a direct coupling to molecular vibrational states via direct overlap of electronic wave functions or through a long-range energy-transfer process. Also, photoejected carriers resulting from an Auger process or ionization processes may diffuse temporarily onto a ligand site. These scenarios are discussed in the current publication with supporting theoretical and experimental observations.

Enhanced Luminescent Stability through Particle Interactions in Silicon Nanocrystal Aggregates

Close-packed assemblies of ligand-passivated colloidal nanocrystals can exhibit enhanced photoluminescent stability, but the origin of this effect is unclear. Here, we use experiment, simulation, and ab initio computation to examine the influence of interparticle interactions on the photoluminescent stability of silicon nanocrystal aggregates. The time-dependent photoluminescence emitted by structures ranging in size from a single quantum dot to agglomerates of more than a thousand is compared with Monte Carlo simulations of noninteracting ensembles using measured single-particle blinking data as input. In contrast to the behavior typically exhibited by the metal chalcogenides, the measured photoluminescent stability shows an enhancement with respect to the noninteracting scenario with increasing aggregate size. We model this behavior using time-dependent density functional theory calculations of energy transfer between neighboring nanocrystals as a function of nanocrystal size, separation, and the presence of charge and/or surface-passivation defects. Our results suggest that rapid exciton transfer from "bright" nanocrystals to surface trap states in nearest-neighbors can efficiently fill such traps and enhance the stability of emission by promoting the radiative recombination of slowly diffusing excited electrons.

Nanoscopic optical rulers beyond the FRET distance limit: fundamentals and applications

In the last few decades, Förster resonance energy transfer (FRET) based spectroscopy rulers have served as a key tool for the understanding of chemical and biochemical processes, even at the single molecule level. Since the FRET process originates from dipole-dipole interactions, the length scale of a FRET ruler is limited to a maximum of 10 nm. Recently, scientists have reported a nanomaterial based long-range optical ruler, where one can overcome the FRET optical ruler distance dependence limit, and which can be very useful for monitoring biological processes that occur across a greater distance than the 10 nm scale. Advancement of nanoscopic long range optical rulers in the last ten years indicate that, in addition to their long-range capability, their brightness, long lifetime, lack of blinking, and chemical stability make nanoparticle based rulers a good choice for long range optical probes. The current review discusses the basic concepts and unique light-focusing properties of plasmonic nanoparticles which are useful in the development of long range one dimensional to three dimensional optical rulers. In addition, to provide the readers with an overview of the exciting opportunities within this field, this review discusses the applications of long range rulers for monitoring biological and chemical processes. At the end, we conclude by speculating on the role of long range optical rulers in future scientific research and discuss possible problems, outlooks and future needs in the use of optical rulers for technological applications.

Bloch Surface Wave-Coupled Emission from Quantum Dots by Ensemble and Single Molecule Spectroscopy

We report the spectral properties and spatial distribution of quantum dot (QD575 ) emission on a one-dimensional photonic crystal (1DPC). Our 1DPC substrate consists of multiple layers of dielectrics with a photonic band gap (PBG) near the QD575 emission maximum. The 1DPC was designed to display a surface-trapped electromagnetic state known as a Bloch surface wave (BSW) at the 1DPC-air (sample) interface. Ensemble angle-dependent emission intensities revealed a sharp angular emission peak near 41° from the normal which is consistent with the BSW resonance at 575 nm. We further examined the emission from single QDs on the 1DPC. A notable increase in fluorescence intensity from QD575 particles was observed on BSW substrate compared to the glass substrate from the scanning confocal fluorescence images and from the intensity-time trajectories of single QD575 particles. The intensity-decays showed substantially faster decay (4-fold decrease in emission lifetime) from the single QD575 particles on 1DPC substrate (∼4.8 nsec) as compared to the glass substrate (∼18 nsec). We observed the spectral characteristics of the individual QD575 particles on 1DPC and glass substrates, by recording the single particle emission spectra through the 1DPC. The emission spectra of the single QD575 particles are similar (with emission maxima around 575 nm) on both substrates except a substantial increase in intensity (over 10-fold) on the BSW substrate. Our results demonstrate that quantum dots can interact with Bloch Surface Waves (BSW) on a 1DPC. To the best of our knowledge, this is the first report on the single particle fluorescence studies on 1DPC substrate. The 10-fold increase in intensity in combination with 4-fold reduction in emission lifetime suggest 1DPCs with BSW modes have potential use in sensing and single molecule spectroscopy.

An experimental and theoretical mechanistic study of biexciton quantum yield enhancement in single quantum dots near gold nanoparticles

In this work, we systematically investigated the plasmonic effect on blinking, photon antibunching behavior and biexciton emission of single CdSe/CdS core/shell quantum dots (QDs) near gold nanoparticles (NPs) with a silica shell (Au@SiO2). In order to obtain a strong interaction between the plasmons and excitons, the Au@SiO2 NPs and CdSe/CdS QDs of appropriate sizes were chosen so that the plasmon resonance overlaps with the absorption and emission of the QDs. We observed that in the regime of a low excitation power, the photon antibunching and blinking properties of single QDs were modified significantly when the QDs were on the Au@SiO2 substrates compared to those on glass. Most significantly, second-order photon intensity correlation data show that the presence of plasmons increases the ratio of the biexciton quantum yield over the exciton quantum yield (QYBX/QYX). An electrodynamics model was developed to quantify the effect of plasmons on the lifetime, quantum yield, and emission intensity of the biexcitons for the QDs. Good agreement was obtained between the experimentally measured and calculated changes in QYBX/QYX due to Au@SiO2 NPs, showing the validity of the developed model. The theoretical studies also indicated that the relative position of the QDs to the Au NPs and the orientation of the electric field are important factors that regulate the emission properties of the excitons and biexcitons of QDs. The study suggests that the multiexciton emission efficiency in QD systems can be manipulated by employing properly designed plasmonic structures.

Luminescent sensors based on quantum dot–molecule conjugates

We illustrate the principles underlying the rational construction of luminescent sensors by combining semiconductor nanocrystal and molecular components, and describe the representative examples of sensors for ionic and molecular analytes.

Tailoring the exciton fine structure of cadmium selenide nanocrystals with shape anisotropy and magnetic field

We use nominally spheroidal CdSe nanocrystals with a zinc blende crystal structure to study how shape perturbations lift the energy degeneracies of the band-edge exciton. Nanocrystals with a low degree of symmetry exhibit splitting of both upper and lower bright state degeneracies due to valence band mixing combined with the isotropic exchange interaction, allowing active control of the level splitting with a magnetic field. Asymmetry-induced splitting of the bright states is used to reveal the entire 8-state band-edge fine structure, enabling complete comparison with band-edge exciton models.

Photothermal Microscopy of Nonluminescent Single Particles Enabled by Optical Microresonators

A powerful new paradigm for single-particle microscopy on nonluminescent targets is reported using ultrahigh-quality factor optical microresonators as the critical detecting element. The approach is photothermal in nature as the microresonators are used to detect heat dissipated from individual photoexcited nano-objects. The method potentially satisfies an outstanding need for single-particle microscopy on nonluminescent objects of increasingly smaller absorption cross section. Simultaneously, our approach couples the sensitivity of label-free detection using optical microresonators with a means of deriving chemical information on the target species, a significant benefit. As a demonstration, individual nonphotoluminescent multiwalled carbon nanotubes are spatially mapped, and the per-atom absorption cross section is determined. Finite-element simulations are employed to model the relevant thermal processes and elucidate the sensing mechanism. Finally, a direct pathway to the extension of this new technique to molecules is laid out, leading to a potent new method of performing measurements on individual molecules.