The pivotal role of bromine in FeMnKBr/YNa catalyst for CO2 hydrogenation to light olefins

Light olefins are key intermediates in the synthesis of petrochemicals, and the conversion of stabilized carbon dioxide to light olefins using catalysts containing halogenated elements such as chlorine is a major challenge. Building on previous reports emphasizing the toxic effects of halogen elements on catalysts, we present the synthesis of FeMnKBr/YNa catalysts. This involved the synthesis of the catalyst by melt permeation using Br-containing potassium salts, other metal nitrates and YNa zeolites. The catalyst performed well in converting syngas (H2/CO2 = 3) to light olefins with a selectivity of 56.2%, CO2 conversion of 34.4%, and CO selectivity of 13.6%. Adding Br aids in reducing the Fe phase, boosts catalyst carburization, and produces more iron carbide species. It also moderately deposits carbon on the active center's surface, enhancing active phase dispersion. Br's electronegativity mitigates the influence of K, reducing catalyst's carbon-carbon coupling ability, leading to more low-carbon olefins generation.

Hollow carbon-based materials for electrocatalytic and thermocatalytic CO2 conversion

Electrocatalytic and thermocatalytic CO2 conversions provide promising routes to realize global carbon neutrality, and the development of corresponding advanced catalysts is important but challenging. Hollow-structured carbon (HSC) materials with striking features, including unique cavity structure, good permeability, large surface area, and readily functionalizable surface, are flexible platforms for designing high-performance catalysts. In this review, the topics range from the accurate design of HSC materials to specific electrocatalytic and thermocatalytic CO2 conversion applications, aiming to address the drawbacks of conventional catalysts, such as sluggish reaction kinetics, inadequate selectivity, and poor stability. Firstly, the synthetic methods of HSC, including the hard template route, soft template approach, and self-template strategy are summarized, with an evaluation of their characteristics and applicability. Subsequently, the functionalization strategies (nonmetal doping, metal single-atom anchoring, and metal nanoparticle modification) for HSC are comprehensively discussed. Lastly, the recent achievements of intriguing HSC-based materials in electrocatalytic and thermocatalytic CO2 conversion applications are presented, with a particular focus on revealing the relationship between catalyst structure and activity. We anticipate that the review can provide some ideas for designing highly active and durable catalytic systems for CO2 valorization and beyond.

Oxygenated Hydrocarbons from Catalytic Hydrogenation of Carbon Dioxide

Once fundamental difficulties such as active sites and selectivity are fully resolved, metal-free catalysts such as 3D graphene or carbon nanotubes (CNT) are very cost-effective substitutes for the expensive noble metals used for catalyzing CO2. A viable method for converting environmental wastes into useful energy storage or industrial wealth, and one which also addresses the environmental and energy problems brought on by emissions of CO2, is CO2 hydrogenation into hydrocarbon compounds. The creation of catalytic compounds and knowledge about the reaction mechanisms have received considerable attention. Numerous variables affect the catalytic process, including metal–support interaction, metal particle sizes, and promoters. CO2 hydrogenation into different hydrocarbon compounds like lower olefins, alcoholic composites, long-chain hydrocarbon composites, and fuels, in addition to other categories, have been explained in previous studies. With respect to catalyst design, photocatalytic activity, and the reaction mechanism, recent advances in obtaining oxygenated hydrocarbons from CO2 processing have been made both through experiments and through density functional theory (DFT) simulations. This review highlights the progress made in the use of three-dimensional (3D) nanomaterials and their compounds and methods for their synthesis in the process of hydrogenation of CO2. Recent advances in catalytic performance and the conversion mechanism for CO2 hydrogenation into hydrocarbons that have been made using both experiments and DFT simulations are also discussed. The development of 3D nanomaterials and metal catalysts supported on 3D nanomaterials is important for CO2 conversion because of their stability and the ability to continuously support the catalytic processes, in addition to the ability to reduce CO2 directly and hydrogenate it into oxygenated hydrocarbons.

Highly Active Ce- and Mg-Promoted Ni Catalysts Supported on Cellulose-Derived Carbon for Low-Temperature CO2 Methanation

The CO₂ methanation performance of Mg- and/or Ce-promoted Ni catalysts supported on cellulose-derived carbon (CDC) was investigated. The samples, prepared by biomorphic mineralization techniques, exhibit pore distributions correlated to the particle sizes, revealing a direct effect of the metal content in the textural properties of the samples. The catalytic performance, evaluated as CO₂ conversion and CH₄ selectivity, reveals that Ce is a better promoter than Mg, reaching higher conversion values in all of the studied temperature range (150-500 °C). In the interval of 350-400 °C, Ni-Mg-Ce/CDC attains the maximum yield to methane, 80%, reaching near 100% CH₄ selectivity. Ce-promoted catalysts were highly active at low temperatures (175 °C), achieving 54% CO₂ conversion with near 100% CH₄ selectivity. Furthermore, the large potential stability of the Ni-Mg-Ce/CDC catalyst during consecutive cycles of reaction opens a promising route for the optimization of the Sabatier process using this type of catalyst.

Research Progress in Conversion of CO2 to Valuable Fuels

Rapid growth in the world's economy depends on a significant increase in energy consumption. As is known, most of the present energy supply comes from coal, oil, and natural gas. The overreliance on fossil energy brings serious environmental problems in addition to the scarcity of energy. One of the most concerning environmental problems is the large contribution to global warming because of the massive discharge of CO₂ in the burning of fossil fuels. Therefore, many efforts have been made to resolve such issues. Among them, the preparation of valuable fuels or chemicals from greenhouse gas (CO₂) has attracted great attention because it has made a promising step toward simultaneously resolving the environment and energy problems. This article reviews the current progress in CO₂ conversion via different strategies, including thermal catalysis, electrocatalysis, photocatalysis, and photoelectrocatalysis. Inspired by natural photosynthesis, light-capturing agents including macrocycles with conjugated structures similar to chlorophyll have attracted increasing attention. Using such macrocycles as photosensitizers, photocatalysis, photoelectrocatalysis, or coupling with enzymatic reactions were conducted to fulfill the conversion of CO₂ with high efficiency and specificity. Recent progress in enzyme coupled to photocatalysis and enzyme coupled to photoelectrocatalysis were specially reviewed in this review. Additionally, the characteristics, advantages, and disadvantages of different conversion methods were also presented. We wish to provide certain constructive ideas for new investigators and deep insights into the research of CO₂ conversion.

Ammonia Decomposition Enhancement by Cs-Promoted Fe/Al2O3 Catalysts

Abstract

A range of Cs-doped Fe/Al2O3 catalysts were prepared for the ammonia decomposition reaction. Through time on-line studies it was shown that at all loadings of Cs investigated the activity of the Fe/Al2O3 catalysts was enhanced, with the optimum Cs:Fe being ca. 1. Initially, the rate of NH3 decomposition was low, typically < 10% equilibrium conversion (99.7%@500°C) recorded after 1 h. All catalysts exhibited an induction period (typically ca. 10 h) with the conversion reaching a high of 67% equilibrium conversion for Cs:Fe = 0.5 and 1. The highest rate of decomposition observed was attributed to the balance between increasing the concentration of Cs without blocking the active site. Analysis of H2-TPR and XPS measurements indicated that Cs acts as an electronic promoter. Previously, Cs has been shown to act as a promoter for Ru, where Cs alters the electron density of the active site, thereby facilitating the recombination of N2 which is considered the rate determining step. In addition, XRD and N2 adsorption measurements suggest that with higher Cs loadings deactivation of the catalytic activity is due to a layer of CsOH that forms on the surface and blocks active sites.

Graphic Abstract

Shedding Light Onto the Nature of Iron Decorated Graphene and Graphite Oxide Nanohybrids for CO2 Conversion at Atmospheric Pressure

We report on the design and testing of new graphite and graphene oxide-based extended π-conjugated synthetic scaffolds for applications in sustainable chemistry transformations. Nanoparticle-functionalised carbonaceous catalysts for new Fischer Tropsch and Reverse GasWater Shift (RGWS) transformations were prepared: functional graphene oxides emerged from graphite powders via an adapted Hummer's method and subsequently impregnated with uniform-sized nanoparticles. Then the resulting nanomaterials were imaged by TEM, SEM, EDX, AFM and characterised by IR, XPS and Raman spectroscopies prior to incorporation of Pd(II) promoters and further microscopic and spectroscopic analysis. Newly synthesised 2D and 3D layered nanostructures incorporating carbon-supported iron oxide nanoparticulate pre-catalysts were tested, upon hydrogen reduction in situ, for the conversion of CO2 to CO as well as for the selective formation of CH4 and longer chain hydrocarbons. The reduction reaction was also carried out and the catalytic species isolated and fully characterised. The catalytic activity of a graphene oxide-supported iron oxide pre-catalyst converted CO2 into hydrocarbons at different temperatures (305, 335, 370 and 405 °C), and its activity compared well with that of the analogues supported on graphite oxide, the 3-dimensional material precursor to the graphene oxide. Investigation into the use of graphene oxide as a framework for catalysis showed that it has promising activity with respect to reverse gas water shift (RWGS) reaction of CO2 to CO, even at the low levels of catalyst used and under the rather mild conditions employed at atmospheric pressure. Whilst the γ-Fe2O3 decorated graphene oxide-based pre-catalyst displays fairly constant activity up to 405 °C, it was found by GC-MS analysis to be unstable with respect to decomposition at higher temperatures. The addition of palladium as a promoter increased the activity of the iron functionalised graphite oxide in the RWGS. The activity of graphene oxide supported catalysts was found to be enhanced with respect to that of iron-functionalised graphite oxide with, or without palladium as a promoter, and comparable to that of Fe@carbon nanotube-based systems tested under analogous conditions. These results display a significant step forward for the catalytic activity estimations for the iron functionalised and rapidly processable and scalable graphene oxide. The hereby investigated phenomena are of particular relevance for the understanding of the intimate surface morphologies and the potential role of non-covalent interactions in the iron oxide-graphene oxide networks, which could inform the design of nano-materials with performance in future sustainable catalysis applications.

Sustainable Synthesis of Oxalic and Succinic Acid through Aerobic Oxidation of C6 Polyols Under Mild Conditions

The sustainable chemical industry encompasses a shift from the use of fossil carbon to renewable carbon. The synthesis of chemicals from nonedible biomass (cellulosic or oil) represents one of the key steps for "greening" the chemical industry. In this paper, we report the aerobic oxidative cleavage of C6 polyols (5-HMF, glucose, fructose and sucrose) to oxalic acid (OA) and succinic acid (SA) in water under mild conditions using M@CNT and M@NCNT (M=Fe, V; CNT=carbon nanotubes; NCNT=N-doped CNT), which, under suitable conditions, were recoverable and reusable without any loss of efficiency. The influence of the temperature, O₂ pressure (PO2 ), reaction time and stirring rate are discussed and the best reaction conditions are determined for an almost complete conversion of the starting material and a good OA yield of 48 %. SA and formic acid were the only co-products. The former could be further converted into OA by oxidation in the presence of formic acid, resulting in an overall OA yield of >62 %. This process was clean and did not produce organic waste nor gas emissions.

Kinetics of CO2 Hydrogenation to Hydrocarbons over Iron-Silica Catalysts

The conversion of CO₂ to hydrocarbons is increasingly seen as a potential alternative source of fuel and chemicals, while at the same time contributing to addressing global warming effects. An understanding of kinetics and mass transfer limitations is vital to both optimise catalyst performance and to scale up the whole process. In this work we report on a systematic investigation of the influence of the different process parameters, including pore size, catalyst support particle diameter, reaction temperature, pressure and reactant flow rate on conversion and selectivity of iron nanoparticle -silica catalysts. The results provided on activation energy and mass transfer limitations represent the basis to fully design a reactor system for the effective catalytic conversion of CO₂ to hydrocarbons.

Origin of the Excellent Performance of Ru on Nitrogen-Doped Carbon Nanofibers for CO2 Hydrogenation to CH4

Carbon materials have rarely been used as support for CO₂ methanation, which is usually carried out using catalysts supported on metal oxides. Here, it is shown that Ru nanoparticles supported on nitrogen-doped carbon nanofibers (NCNF) provide competitive CH₄ production rate and stability compared to Al₂ O₃ -supported catalysts. Contrary to the general belief about the inert nature of carbon supports, it is demonstrated that NCNF is a non-innocent spectator in CO₂ methanation due to its ability to store a high amount of CO_ad reaction intermediates. This explains the excellent catalytic behaviour afforded by this unconventional catalyst support.

Improvement of Catalytic Activity by Nanofibrous CuInS2 for Electrochemical CO2 Reduction

The current study reports the application of chalcopyrite semiconductor CuInS₂ (CIS) nanofibers for the reduction of CO₂ to CO with a remarkable Faradaic efficiency of 77 ± 4%. Initially the synthesis of CuInS₂ nanofibers was carried out by adaptable electrospinning technique. To reduce the imperfection in the crystalline fiber, polyacrylonitrile (PAN) was selected as template polymer. Afterward, the desired chemical structure of nanofibers was achieved through sulfurization process. Making continuous CuInS₂ nanofibers on the cathode surface by the electrospinning method brings the advantages of being economical, environmentally safe, and versatile. The obtained nanofibers of well investigated size and diameter according to the SEM (scanning electron microscope) were used in electrochemical studies. An improvement of Faradaic efficiency was achieved with the catalytic active CuInS₂ in nanofibrous structure as compared to the solution processed CuInS₂. This underlines the important effect of the electrode fabrication on the catalytic performance. Being less contaminated as compared to solution processing, and having a well-defined composition and increased catalytically active area, the CuInS₂ nanofiber electrodes prepared by the electrospinning technique show a 4 times higher Faradaic efficiency. Furthermore, in this study, attention was paid to the stability of the CuInS₂ nanofiber electrodes. The electrochemical reduction of CO₂ to CO by using CIS nanofibers coated onto FTO electrodes was carried out for 10 h in total. The observed current density of 0.22 mA cm^-2 and the stability of CIS nanofiber electrodes are found to be competitive with other heterogeneous electrocatalysts. Hence, we believe that the fabrication and application of nanofibrous materials through the electrospinning technique might be of interest for electrocatalytic studies in CO₂ reduction.

New insights into the effect of sodium on Fe3O4- based nanocatalysts for CO2 hydrogenation to light olefins

Na-containing Fe₃O₄ nanocatalysts show improved performance in CO₂ hydrogenation due to enhanced surface basicity and carburization induced by residual Na.

Effect of nanostructured ceria as support for the iron catalysed hydrogenation of CO2 into hydrocarbons

This paper demonstrates the key role of the property–structure relationship of the support on iron/ceria catalysts on the hydrocarbon selectivity and olefin-to-paraffin ratio for the direct hydrogenation of carbon dioxide into hydrocarbons.

Towards Carbon-Neutral CO2 Conversion to Hydrocarbons

With fossil fuels still predicted to contribute close to 80 % of the primary energy consumption by 2040, methods to limit further CO2 emissions in the atmosphere are urgently needed to avoid the catastrophic scenarios associated with global warming. In parallel with improvements in energy efficiency and CO2 storage, the conversion of CO2 has emerged as a complementary route with significant potential. In this work we present the direct thermo-catalytic conversion of CO2 to hydrocarbons using a novel iron nanoparticle-carbon nanotube (Fe@CNT) catalyst. We adopted a holistic and systematic approach to CO2 conversion by integrating process optimization-identifying reaction conditions to maximize conversion and selectivity towards long chain hydrocarbons and/or short olefins-with catalyst optimization through the addition of promoters. The result is the production of valuable hydrocarbons in a manner that can approach carbon neutrality under realistic industrial process conditions.

Nanoscale Heterostructures Based on Fe2O3@WO3-x Nanoneedles and Their Direct Integration into Flexible Transducing Platforms for Toluene Sensing

Nanoscale heterostructures based on WO3-x nanoneedles functionalized with Fe2O3 nanoparticles are integrated directly into flexible polymer-based transducing platforms via aerosol-assisted chemical vapor deposition. Results demonstrate that the incorporation of Fe2O3 nanoparticles at the surface of WO3-x nanoneedles enhances the electronic and sensing properties of WO3-x, providing a 6-fold increase in sensitivity to toluene and low cross-sensitivity to hydrogen and ethanol. These enhanced-sensing properties are comparable to those obtained via functionalization with precious metal (Pt) nanoparticles, which are commonly used to enhance sensor performance.

Nanoparticles of ZrPO4 for green catalytic applications

Here we report the successful room temperature synthesis of zirconium phosphate nanoparticles (ZPNP) using the P123 tri-co-block polymer for the first time. The samples were characterized by SEM, TEM, XRD, TPD, and BET and were employed for fixation of CO2 on aniline to produce pharmaceutically important acetanilide under mild reaction conditions (150 °C and 150 Psi CO2 pressure).

Fe@CNT-monoliths for the conversion of carbon dioxide to hydrocarbons: structural characterisation and Fischer–Tropsch reactivity investigations

High carbon dioxide conversion to hydrocarbons using iron nanoparticle (Fe@CNT) catalysts supported on cordierite monoliths.

Catalytic nanoreactors in continuous flow: hydrogenation inside single-walled carbon nanotubes using supercritical CO2

One nanometre wide carbon nanoreactors are utilised as the reaction vessel for catalytic chemical reactions on a preparative scale.

Aligned carbon nanotube/copper sheets: a new electrocatalyst for CO2 reduction to hydrocarbons

We controlled the morphologies of copper (Cu) nanostructure on aligned carbon nanotube (CNT) sheets, influencing the efficiency of the electrocatalytic reduction of CO₂.