Three-Dimensional Hydrogen-Bonded Porous Metal-Organic Framework for Natural Gas Separation with High Selectivity

A 3D hydrogen-bonded metal-organic framework, [Cu(apc)2]n (TJU-Dan-5, Hapc = 2-aminopyrimidine-5-carboxylic acid), was synthesized via a solvothermal reaction. The activated TJU-Dan-5 with permanent porosity exhibits a moderate uptake of 1.52 wt% of hydrogen gas at 77 K. The appropriate BET surface areas and decoration of the internal polar pore surfaces with groups that form extensive hydrogen bonds offer a more favorable environment for selective C2H6 adsorption, with a predicted selectivity for C2H6/CH4 of around 101 in C2H6/CH4 (5:95, v/v) mixtures at 273 K under 100 kPa. The molecular model calculation demonstrates a C-H···π interaction and a van der Waals host-guest interaction of C2H6 with the pore walls. This work provides a strategy for the construction of 3D hydrogen-bonded MOFs, which may have great potential in the purification of natural gas.

Controllable Synthesis of TbIII Metal-Organic Frameworks with Reversible Luminescence Sensing for Benzaldehyde Vapor

Two novel lanthanide metal-organic frameworks (MOFs) with the formulas [Tb(bidc)(Hbidc)(H₂O)]_n (JXUST-20) and {[Tb₃(bidc)₄(HCOO)(DMF)]·solvents}_n (JXUST-21) were synthesized based on 2,1,3-benzothiadiazole-4,7-dicarboxylic acid (H₂BTDC) under solvothermal conditions. Interestingly, benzimidazole-4,7-dicarboxylic acid (H₂bidc) was formed in situ using H₂BTDC as the starting material. The self-assembly process of the targeted MOFs with different topological structures can be controlled by the solvents and concentration of the reactants. Luminescence experiments show that JXUST-20 and JXUST-21 exhibit strong yellow-green emission. JXUST-20 and JXUST-21 can selectively sense benzaldehyde (BzH) via a luminescence quenching effect with detection limits of 15.3 and 1.44 ppm, respectively. In order to expand the practical application of MOF materials, mixed-matrix membranes (MMMs) have been constructed by mixing targeted MOFs and poly(methyl methacrylate) in a N,N-dimethylformamide (DMF) solution, which can also be used for BzH vapor sensing. Therefore, the first case of MMMs derived from Tb^III MOFs has been developed for the reversible detection of BzH vapor, providing a simple and efficient platform for the future detection of volatile organic compounds.

Preparation of a Tetra-Imidazolium Salt and Sensing for p-Dinitrobenzene

A macrocyclic tetra-imidazolium salt (2) based on quinoxaline was prepared and characterized. The recognition of 2 to nitro compounds was investigated by fluorescence spectroscopy, ¹H NMR titrations, MS, IR spectroscopy, and UV/vis spectroscopy. The results displayed that 2 was able to effectively differentiate p-dinitrobenzene from other nitro compounds via the fluorescence method.

Metal-Organic Framework Materials for Electrochemical Supercapacitors

Exploring new materials with high stability and capacity is full of challenges in sustainable energy conversion and storage systems. Metal-organic frameworks (MOFs), as a new type of porous material, show the advantages of large specific surface area, high porosity, low density, and adjustable pore size, exhibiting a broad application prospect in the field of electrocatalytic reactions, batteries, particularly in the field of supercapacitors. This comprehensive review outlines the recent progress in synthetic methods and electrochemical performances of MOF materials, as well as their applications in supercapacitors. Additionally, the superiorities of MOFs-related materials are highlighted, while major challenges or opportunities for future research on them for electrochemical supercapacitors have been discussed and displayed, along with extensive experimental experiences.

A Dihydrotetrazine-Functionalized Metal-Organic Framework as a Highly Selective Luminescent Host-Guest Sensor for Detection of 2,4,6-Trinitrophenol

Pore decoration of metal-organic frameworks (MOFs) with functional groups is a useful strategy to attain high selectivity toward specific analytes, especially in the presence of interfering molecules with similar structures and energy levels, through selective host-guest interactions. In this work, we applied a dihydrotetrazine-decorated MOF, TMU-34, with the formula [Zn(OBA)(H₂DPT)_0.5]_n·DMF, where H₂OBA is 4,4'-oxybis(benzoic acid) and H₂DPT is 3,6-bis(pyridin-4-yl)-1,4-dihydro-1,2,4,5-tetrazine, for the highly selective detection of phenolic NACs, especially TNP (94% quenching efficiency, detection limit 8.1 × 10^-6 M, K_SV = 182663 mol L^-1), in the presence of other substituted NACs especially -NH₂-substituted NACs. Investigations reveal that the quenching mechanism is dominated by photoinduced MOF-to-TNP electron transfer through possible hydrogen-bonding interactions between the phenolic hydroxyl group of TNP and dihydrotetrazine functions of TMU-34. Despite extensive publications on the detection of TNP in the presence of other NACs, the significance of this work will be elucidated if attention is paid to the fact that TMU-34 is among the rare and highly selective MOF-based TNP sensors in the presence of -NH₂-substituted NACs as the serious interferers.

Flexible luminescent non-lanthanide metal-organic frameworks as small molecules sensors

Toxic, carcinogenic, and hazardous materials are omnipresent, generally obtained by anthropogenic activities, industrial activities, aerobic and anaerobic degradation of waste materials and are harmful to human health and environment. Thus, sensing, colorimetric detection, and subsequent inclusion of these chemicals are of prime importance for human health and environment. In comparison to other classes of highly porous materials, luminescent metal-organic frameworks (LMOFs) have chromophoric organic ligands, high surface area, high degree of tunability and structural diversity. They have received scientific interest as sensory materials for device fabrication to detect and sense toxic small molecules. Especially, as soft-porous materials exhibiting a degree of flexibility or dynamic behaviour, flexible LMOFs are promising for selective detection and sensing, and for encapsulation of toxic and health hazardous molecules. Such flexible LMOFs offer a potential platform for selective adsorption/separation, molecular recognition, and sensing application. In this perspective, we highlight the advantages of flexibility of LMOFs for selective detection and sensing, and inclusion of toxic small molecules (solvents, anions, halobenzenes, aromatics, aromatic amines, nitro-explosives and acetylacetone). In addition, the principles and strategies guiding the design of these MOF based materials and recent progress in the luminescent detection of toxic small molecules are also discussed. In this perspective we limit our discussion on the 'non-lanthanide' based luminescent MOFs that have flexibility in the framework and show small molecule sensing applications.

Dicyanamide-intertwined assembly of two new Zn complexes based on N2O4-type pro-ligand: Synthesis, crystal networks, spectroscopic insights, and selective nitroaromatic turn-off fluorescence sensing

Two new dicyanamide bridged multinuclear Zn complexes, [Zn₂(L¹)(µ_1,5-dca)₂(µ₁-dca)]_n (1) and [Zn₂(L²)(µ_1,5-dca)₂(µ₁-dca)]_n (2) have been synthesized using N₂O₄-based pro-ligands (H₂L¹ = N,N'-bis(5-bromo-3-methoxysalicylidenimino)-1,3-diaminopropane, H₂L² = N,N'-bis(3-ethoxysalicylidene)-2,2-dimethyl-1,3-propanediamine) and characterized by microanalytical and spectroscopic techniques. Both complexes are stable in solution and solid-state. Thermogravimetric analysis (TGA) findings showed that complexes are stable at room temperature. Single-crystal X-ray diffraction (SCXRD) has proven that complexes are identical structures where two zinc metal ions are crystallographically independent. The directional properties of dicyanamide co-ligands via µ_1,5 bridging have resulted in different connectivity of zinc metal ions leading to 1D templates. SCXRD revealed some notable non-covalent interactions (π⋯π, C-H····π, and H-bonding) in their solid-state crystal structures. 1-2 have strong fluorescence behaviour over pro-ligands, which may be quenched in the presence of various electron-deficient explosive nitroaromatic compounds (epNACs). Complex 2 fluorescence intensity is sharper than 1; hence the former retained high sensitivity and selectivity for trinitrophenol (TNP). The enhancement of fluorescence mechanism, detection limit (LOD), and the quenching constant (K_SV) have been calculated using the Stern-Volmer equation (SV), where the K_SV value for TNP is found to be 1.542 × 10⁴ M^-1. The solution phase quenching mechanism has been rationalized by (a) electrostatic interactions through charge-transfer complex, (b) photo-induced electron transfer (PET) by the HOMO-LUMO energy gap via DFT, and (c) fluorescence resonance energy transfer (FRET). Finally, complex 2 is applied as a sensor by turn-off fluorescence response to detecting TNP nitroaromatics in the DMF medium.

A novel sustainable metal organic framework as the ultimate aqueous phase sensor for natural hazards: detection of nitrobenzene and F− at the ppb level and rapid and selective adsorption of methylene blue

A novel metal organic framework (MOF) exhibits good aqueous phase sensing properties towards nitrobenzene and fluoride anions and selective adsorption/separation ability for methylene blue.

Pyrene-appended bipyridine hydrazone ligand as a turn-on sensor for Cu2+ and its bioimaging application

A pyrene-appended bipyridine hydrazone-based ligand, HL, was synthesized and characterized by spectroscopic methods. Upon complexation with Cu(ii), HL formed a hexanuclear paddlewheel metal–organic macrocycle (MOM) via self-assembly with a high association constant with the molecular formula of [Cu₆L₆(NO₃)₆]. Intermolecular and intramolecular π–π interactions were demonstrated in this hexanuclear Cu(ii) complex. Further, it was observed that HL had the potential to detect a trace level of Cu(ii) ion selectively among a wide range of biologically relevant metal ions in aqueous medium at physiological pH. Using HL, it was feasible to sense copper(ii) ions in living cells due to its good cell permeability and high solubility under physiological conditions along with its high IC₅₀ value. The low detection limit, high sensitivity and good reproducibility make this Cu–sensor very promising. The complex (MOM) formed between the ligand and Cu(ii) was found to be 1 : 1 on the basis of fluorescence titrations and was confirmed by ESI-MS. Moreover, single-crystal study of the hexanuclear self-assembled fluorescent species provided better insight into its chemistry, e.g. coordination environment and binding mode, unlike most of the metal sensors due to the lack of a single-crystal structure of the metal sensor complex. Cytotoxicity assay and bioimaging were performed in living cells (Vero cells), giving green fluorescent images. Fluorescence lifetime measurements and theoretical calculations were carried out. The morphology and topographic details on the surface of the metal–organic macrocycle (MOM) were studied by field-emission scanning electron microscopy (FESEM).

A pyrene-based “turn-on” Cu(ii) sensor provides a chemiluminescent Cu₆ metal organic macrocycle (MOM) applicable for live cell imaging.

Sensing organic analytes by metal–organic frameworks: a new way of considering the topic

In this review, our goal is comparison of advantageous and disadvantageous of MOFs about signal-transduction in different instrumental methods for detection of different categories of organic analytes.

Construction of bifunctional 2-fold interpenetrated Zn(ii) MOFs exhibiting selective CO2 adsorption and aqueous-phase sensing of 2,4,6-trinitrophenol

Design of Zn(ii) MOFs, [{Zn(BINDI)_0.5(bpa)_0.5(H₂O)}·4H₂O]_n (MOF1) and [{Zn(BINDI)_0.5(bpe)}·3H₂O]_n (MOF2) for selective CO₂ storage and aqueous-phase detection of TNP is demonstrated.

Erbium(iii)-based metal–organic frameworks with tunable upconversion emissions

A series of Ln-MOFs with varied upconversion luminescence emissions were obtained, which follows an excited state absorption mechanism.

A highly hydrolytically stable lanthanide organic framework as a sensitive luminescent probe for DBP and chlorpyrifos detection

A series of isostructural 3D Ln-MOFs with exceptional hydrolytic stability were synthesized. The Tb³⁺ compound showed excellent sensing ability towards DBP and chlorpyrifos.

Supramolecular recognition of benzene homologues in a 2D coordination polymer through variable inter-layer π–π interaction

A 2D network 1 was synthesized. After immersing 1 in benzene homologues, the crystal structures of 2 and 3 were gotten, demonstrating that the introduction of benzene homologues has transformed the π–π packing mode, further altering the host framework and fluorescence performance.

Fluorescence detection of Mn2+, Cr2O72−and nitroexplosives and photocatalytic degradation of methyl violet and rhodamine B based on two stable metal–organic frameworks

Two new MOFs show 3D 2-fold interpenetrating 4-connected networks and could be a prospective candidate for developing the luminescence sensors and the photocatalysis due to their highly stabilities.

Fabrication of a new metal–organic framework for sensitive sensing of nitroaromatics and efficient dye adsorption

Theoretical calculations indicate that the luminescence quenching in 1 in the presence of NACs can be attributed to an electron and resonance energy transfer between the MOF 1 and nitro analytes.

Luminescent sulfonate coordination polymers: synthesis, structural analysis and selective sensing of nitroaromatic compounds

Enhanced fluorescence intensity of sulfonate coordination polymers on addition of picric acid.

pH-Stable Eu- and Tb-organic-frameworks mediated by an ionic liquid for the aqueous-phase detection of 2,4,6-trinitrophenol (TNP)

pH-Stable Eu- and Tb-organic-frameworks mediated by ionic liquids for the aqueous-phase detection of 2,4,6-trinitrophenol (TNP).

A 3D luminescent Zn(ii) MOF for the detection of high explosives and the degradation of organic dyes: an experimental and computational study

A 3D uncommon porous MOF 1 with a 4-c lonsdaleite (lon) topology based on binuclear Zn clusters behaves as a fluorescent chemosensor and a photocatalyst.

A four-fold interpenetrated metal-organic framework as a fluorescent sensor for volatile organic compounds

A four-fold interpenetrated three dimensional (3D) metal-organic framework, [Cd2(tppe)(bpdc)2(H2O)]·solvent (1), was synthesized with a tetraphenylethene (TPE)-based ligand, 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethene (TPPE). This complex exhibits intense blue luminescence and is sensitive to toxic volatile organic compounds (VOCs).

Synthesis and structure of color tunable and white-light emitting lanthanide metal–organic framework materials constructed from conjugated 1,1′-butadiynebenzene-3,3′,5,5′-tetracarboxylate ligand

Seven isostructural lanthanide MOFs based on 1,1′-butadiynebenzene-3,3′, 5,5′-tetracarboxylate ligands were synthesized. Color tunable and white-light emitting materials were achieved by carefully adjusting the doping concentration of Eu³⁺ and Tb³⁺ in the Gd³⁺ compound.

An electrochemical sensor for nitrobenzene using π-conjugated polymer-embedded nanosilver

A novel electrochemical sensing platform for nitrobenzene has been developed using silver nanoparticles (AgNPs) embedded in the poly(amic) acid (PAA) polymer matrix (PAA–AgNPs).

Metal–organic frameworks based luminescent materials for nitroaromatics sensing

During the various applications of MOFs, the photoluminescence properties of MOFs have received growing attention, especially for nitroaromatics (NACs) sensing. In this highlight, we summarize the progress in recent research in NACs sensing based on MOFs and sensing applications for nano-MOF type materials and MOF film.

Lanthanide metal–organic frameworks based on a 1,2,3-triazole-containing tricarboxylic acid ligand for luminescence sensing of metal ions and nitroaromatic compounds

A series of novel 3D lanthanide MOFs based on unsymmetrical 1,2,3-triazole-containing tricarboxylic acid ligand (H3TAIP) has been synthesized. Compound 1 [Tb(TAIP)(DMF)₂] exhibits selective detection of 4-nitrotoluene and Fe³⁺ ion.

Cluster- and chain-based magnetic MOFs derived from 3d metal ions and 1,3,5-benzenetricarboxylate

Three H₃BTC-supported 3D MOFs with triangular M₃ (M = Co, Ni) clusters and rod-shaped sinusoidal-like Mn-chains as building units have been successfully obtained under solvothermal conditions, and complexes 1–3 exhibit antiferromagnetic behaviours.