Biomaterials science and surface engineering strategies for dental peri-implantitis management

Peri-implantitis is a bacterial infection that causes soft tissue inflammatory lesions and alveolar bone resorption, ultimately resulting in implant failure. Dental implants for clinical use barely have antibacterial properties, and bacterial colonization and biofilm formation on the dental implants are major causes of peri-implantitis. Treatment strategies such as mechanical debridement and antibiotic therapy have been used to remove dental plaque. However, it is particularly important to prevent the occurrence of peri-implantitis rather than treatment. Therefore, the current research spot has focused on improving the antibacterial properties of dental implants, such as the construction of specific micro-nano surface texture, the introduction of diverse functional coatings, or the application of materials with intrinsic antibacterial properties. The aforementioned antibacterial surfaces can be incorporated with bioactive molecules, metallic nanoparticles, or other functional components to further enhance the osteogenic properties and accelerate the healing process. In this review, we summarize the recent developments in biomaterial science and the modification strategies applied to dental implants to inhibit biofilm formation and facilitate bone-implant integration. Furthermore, we summarized the obstacles existing in the process of laboratory research to reach the clinic products, and propose corresponding directions for future developments and research perspectives, so that to provide insights into the rational design and construction of dental implants with the aim to balance antibacterial efficacy, biological safety, and osteogenic property.

Nanocomposites based on nanoceria regulate the immune microenvironment for the treatment of polycystic ovary syndrome

The immune system is closely associated with the pathogenesis of polycystic ovary syndrome (PCOS). Macrophages are one of the important immune cell types in the ovarian proinflammatory microenvironment, and ameliorate the inflammatory status mainly through M2 phenotype polarization during PCOS. Current therapeutic approaches lack efficacy and immunomodulatory capacity, and a new therapeutic method is needed to prevent inflammation and alleviate PCOS. Here, octahedral nanoceria nanoparticles with powerful antioxidative ability were bonded to the anti-inflammatory drug resveratrol (CeO2@RSV), which demonstrates a crucial strategy that involves anti-inflammatory and antioxidative efficacy, thereby facilitating the proliferation of granulosa cells during PCOS. Notably, our nanoparticles were demonstrated to possess potent therapeutic efficacy via anti-inflammatory activities and effectively alleviated endocrine dysfunction, inflammation and ovarian injury in a dehydroepiandrosterone (DHEA)-induced PCOS mouse model. Collectively, this study revealed the tremendous potential of the newly developed nanoparticles in ameliorating the proinflammatory microenvironment and promoting the function of granulosa cells, representing the first attempt to treat PCOS by using CeO2@RSV nanoparticles and providing new insights in combating clinical PCOS.

CeO2@CuS@PDA-FA as targeted near-infrared PTT/CDT therapeutic agents for cancer cells

Single tumor treatment method usually has some defects, which makes it difficult to achieve good therapeutic effect. The ingenious combination of multiple tumor treatment methods on a single nanoplatform to achieve multifunctional treatment can effectively improve the efficiency of treatment. The targeted modification of nanomaterials can augment the precision of nanotherapeutic drugs in tumor treatment. Herein, a multifunctional nanoplatform (CeO2@CuS@PDA-FA) based on cerium dioxide nanoparticles engineered with copper sulfide (CeO2@CuS) has been constructed for synergistic photothermal therapy (PTT) and chemodynamic therapy (CDT). The CeO2@CuS were coated using polydopamine (PDA), and the modification of PDA surface by folic acid, in order to achieve the targeted effect for tumors. The localized hyperthermia induced by PTT can further improve the CDT efficiency of the nanoplatform, leading to a PTT/CDT synergistic effect. The nanoplatform possessed the capability of cancer cell-targeted and achieved better therapeutic efficacyin vitro. This work provided a new strategy for combined multifunctional theranostic platform and shows strong potential in practical applications.

Preformed Pt Nanoparticles Supported on Nanoshaped CeO2 for Total Propane Oxidation

Pt-based catalysts have been widely used for the removal of short-chain volatile organic compounds (VOCs), such as propane. In this study, we synthesized Pt nanoparticles with a size of ca. 2.4 nm and loaded them on various fine-shaped CeO2 with different facets to investigate the effect of CeO2 morphology on the complete oxidation of propane. The Pt/CeO2-o catalyst with {111} facets exhibited superior catalytic activity compared to the Pt/CeO2-r catalyst with {110} and {100} facets. Specifically, the turnover frequency (TOF) value of Pt/CeO2-o was 1.8 times higher than that of Pt/CeO2-r. Moreover, Pt/CeO2-o showed outstanding long-term stability during 50 h. X-ray photoelectron spectroscopy (XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that the excellent performance of Pt/CeO2-o is due to the prevalence of metallic Pt species, which promotes C-C bond cleavage and facilitates the rapid removal of surface formate species. In contrast, a stronger metal-support interaction in Pt/CeO2-r leads to easier oxidation of Pt species and the accumulation of intermediates, which is detrimental to the catalytic activity. Our work provides insight into the oxidation of propane on different nanoshaped Pt/CeO2 catalysts.

Regulating Pt-based noble metal catalysts for the catalytic oxidation of volatile organic compounds: a mini review

Volatile organic compounds (VOCs) are an important class of environmental pollutants, and there is much interest in China to eliminate such pollutants. Noble metal catalysts have long been a family of catalysts with high efficiency and good low-temperature catalytic activity. As a representative of the noble metals, Pt has been widely used. This paper reviews the research trend of Pt-based catalysts for the catalytic oxidation of VOCs, and it compares several important components of Pt-based catalysts. The size of Pt particles, supported carriers, and reaction mechanism are reviewed. Toluene in VOCs is the main research subject. The activity, stability, water resistance, and selectivity of a series of Pt-based catalysts are summarized.

Solid-State Construction of CuOx/Cu1.5Mn1.5O4 Nanocomposite with Abundant Surface CuOx Species and Oxygen Vacancies to Promote CO Oxidation Activity

Carbon monoxide (CO) oxidation performance heavily depends on the surface-active species and the oxygen vacancies of nanocomposites. Herein, the CuO_x/Cu_1.5Mn_1.5O₄ were fabricated via solid-state strategy. It is manifested that the construction of CuO_x/Cu_1.5Mn_1.5O₄ nanocomposite can produce abundant surface CuO_x species and a number of oxygen vacancies, resulting in substantially enhanced CO oxidation activity. The CO is completely converted to carbon dioxide (CO₂) at 75 °C when CuO_x/Cu_1.5Mn_1.5O₄ nanocomposites were involved, which is higher than individual CuO_x, MnO_x, and Cu_1.5Mn_1.5O₄. Density function theory (DFT) calculations suggest that CO and O₂ are adsorbed on CuO_x/Cu_1.5Mn_1.5O₄ surface with relatively optimal adsorption energy, which is more beneficial for CO oxidation activity. This work presents an effective way to prepare heterogeneous metal oxides with promising application in catalysis.

Effects of high-temperature CeO2 calcination on the activity of Pt/CeO2 catalysts for oxidation of unburned hydrocarbon fuels

High temperature (800 °C) pre-calcination of CeO2 support decreases the surface defects and improves the mobility of surface lattice oxygen. As a result, the supported Pt clusters have higher oxygen coverage and superior HC oxidation activity.

Bifunctional Ag-Decorated CeO2 Nanorods Catalysts for Promoted Photodegradation of Methyl Orange and Photocatalytic Hydrogen Evolution

The photodegradation of organic pollutants and photocatalytic hydrogen generation from water by semiconductor catalysts are regarded as the of the most promising strategies to resolve the crisis of global environmental issues. Herein, we successfully designed and prepared a series of silver-decorated CeO₂(Ag/CeO₂) photocatalysts with different morphologies by a facile hydrothermal route. The physical properties, charge transfer behavior and photocatalytic performances (degradation and hydrogen evolution) over diverse catalysts with nanocubes, nanoparticles and nanorods shapes were comprehensively studied. It was found that the Ag-decorated CeO₂ nanorods (Ag/R-CeO₂) demonstrate the best activity for both photocatalytic methyl orange (MO) degradation and photocatalytic H₂ production reaction with attractive stability during cycling tests, suggesting its desirable practical potential. The superior performance of Ag/R-CeO₂ can be ascribed to (1) the facilitated light absorption due to enriched surface oxygen vacancies (OVs) and plasmonic Ag nanoparticles on nanorods, (2) the facilitated photo-excited charge carrier (e⁻-h⁺) separation efficiency on a metal/oxide hybrid structure and (3) the promoted formation of active reaction intermediates on surface-enriched Ag and oxygen vacancies reactive sites on Ag/CeO₂ nanorods. This study provides a valuable discovery of the utilization of abundant solar energy for diverse catalytic processes.

The highly efficient removal of HCN over Cu8Mn2/CeO2 catalytic material

In this work, porous CeO₂ flower-like spheres loaded with bimetal oxides were prepared to achieve effective removal of HCN in the lower temperature region of 30–150 °C. Among all samples, the CeO₂ loaded with copper and manganese oxides at the mass ratio of 8/2 (Cu₈Mn₂/CeO₂) exhibited the highest catalytic activity: the HCN removal rate was nearly 100% at 90 °C at the conditions of 120 000 h⁻¹ and 5 vol% H₂O, the catalytic activity of which was higher than for other reported catalysts. The introduction of MnO_x could improve the dispersion of CuO particles and increase the total acid sites of the prepared samples. It was proved that the synergy between CuO and MnO_x, the chemisorption oxygen, the oxygen vacancies, the Cu²⁺ and Mn⁴⁺ all played an important role in determining the good catalytic activity of the prepared samples. NH₃-TPD analysis indicated the introduction of MnO_x promoted the conversion of NH₃ and N₂ selectivity by increasing the acid sites of the sample. According to the C, N balance data and FT-IR results, when the temperature was below 30 °C, the removal of HCN over Cu₈Mn₂/CeO₂ was mainly by chemisorption and the HCN breakthrough behaviors corresponded to the Yoon and Nelson's model. When temperature was above 120 °C, the HCN was totally removed by catalytic hydrolysis and catalytic oxidation.

In this work, porous CeO₂ flower-like spheres loaded with bimetal oxides were prepared to achieve effective removal of HCN in the lower temperature region of 30–150 °C.

A versatile nanocomposite based on nanoceria for antibacterial enhancement and protection from aPDT-aggravated inflammation via modulation of macrophage polarization

Antibacterial photodynamic therapy (aPDT) is of vital importance for the treatment of periodontal diseases due to its great potential on effective elimination of pathogenic bacteria via overwhelming reactive oxygen species (ROS) generation. However, the excessive ROS after the therapeutic process may impose an oxidative stress within periodontal pockets, consequently leading to an irreversible destroy in surrounding tissue and severely limit its biomedical applications. In this study, considering the contradiction between ROS in bacteriostasis and inflammation, the role of ROS in different temporal and spatial states has been fully studied. Accordingly, we have designed composite nanomaterials that can play ROS based aPDT and anti-inflammatory effect by eliminating ROS, taking account of different ratio of photosensitizer/ROS scavenger to realize a time-sequential manner. Herein, a simple multifunctional nanocomposite was fabricated by coating red light-excited photosensitizer chlorin e6 (Ce6) onto nanoceria, achieving simultaneous sterilization and inflammation elimination via a dual directional regulation effect. This nano-based platform could utilize the aPDT for antibacterial purpose in the first stage with red-light irradiation, and subsequently scavenge the residual ROS via nanoceria to modulate host immunity by down-regulating the M1 polarization (pro-inflammatory) of macrophages and up-regulating the M2 polarization (anti-inflammatory and regenerative) of macrophages. Moreover, the local ROS level induced by activated inflammation pathway can be adjusted in a very long time because of the charge conversion effect of CeO₂. The regenerative potential of inflammatory surrounding tissues was improved in the animal model. Our strategy will open a new inspiration to fight against the defects of aPDT in the treatment of periodontal disease, even in the anti-infection therapy for the future clinical application.

Bio-inspired construction of melanin-like polydopamine-coated CeO2 as a high-performance visible-light-driven photocatalyst for hydrogen production

In recent years, cerium oxide has been the most widely studied photocatalyst due to its unique properties.

Surface treatments on titanium implants via nanostructured ceria for antibacterial and anti-inflammatory capabilities

Peri-implantitis is the most common risk factor for dental implant failure. Nanostructured ceria (nano-CeO₂) has anti-inflammatory and antibacterial functions, and different shapes of ceria enclosed by specific crystal planes could be an effective approach to enhance intrinsic catalysis. In the present study, the authors developed a novel implant surface-modification strategy by coating different shapes of nano-CeO₂ onto titanium (Ti) surfaces to enhance their antibacterial and anti-inflammatory properties. The objectives of the study were to: (1) develop novel Ti surfaces modified with different shapes of nano-CeO₂ (nanorod, nanocube and nano-octahedron) for peri-implantitis prevention; (2) investigate and compare the inhibition efficacy of different shapes of CeO₂-modified surfaces against biofilms of peri-implantitis-related pathogens; and (3) evaluate the different CeO₂-modified surfaces on cell inflammatory response in vitro and in vivo. The results showed that nanorod CeO₂-modified Ti had more bacteria attachment of Streptococcus sanguinis in the early stage, compared with other CeO₂-modified Ti (p < 0.05). They all exhibited similarly substantial CFU reductions against peri-implantitis-related biofilms (p > 0.1). Nanocube and nano-octahedron CeO₂-modified Ti exerted much better anti-inflammatory effects and ROS-scavenging ability than nanorod CeO₂in vitro (p < 0.05). In vivo, the mean mRNA expression of TNF-α, IL-6 and IL-1β in the tissues around Ti was decreased by the three shapes of nano-CeO₂; nano-octahedron CeO₂ showed the strongest anti-inflammatory effect among all groups (p < 0.05). In conclusion, all three types of CeO₂-modified Ti exerted equally strong antibacterial properties; nano-octahedron CeO₂-modified Ti had the best anti-inflammatory effect. Therefore, CeO₂-modified Ti surfaces are highly promising for enhancing antimicrobial functions for dental implants. Novel nano-octahedron CeO₂ coating on Ti had great therapeutic potential for alleviating and eliminating peri-implantitis. STATEMENT OF SIGNIFICANCE: Peri-implantitis is the most common risk factor for dental implant failure. Nanostructured ceria (nano-CeO₂) has anti-inflammatory and antibacterial functions, and different shapes of ceria enclosed by specific crystal planes could be an effective approach to enhance intrinsic catalysis. In the present study, we developed a novel implant surface-modification strategy by coating different shapes of nano-CeO₂ onto titanium surfaces to enhance their antibacterial and anti-inflammatory properties for dental implants. In addition, we found that the nano-octahedron CeO₂ coating on titanium would have great therapeutic potential for alleviating and eliminating peri-implantitis.

The Preparation and Catalytic Properties of Nanoporous Pt/CeO2 Composites with Nanorod Framework Structures

Pt/CeO₂ catalysts with nanoporous structures were prepared by the facile dealloying of melt-spun Al_92-XCe₈Pt_X (X = 0.1; 0.3 and 0.5) ribbons followed by calcination. The phase compositions and structural parameters of the catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The specific surface area and pore size distribution were characterized by N₂ adsorption-desorption tests. The catalytic properties were evaluated by a three-way catalyst (TWC) measurement system. The results revealed that the dealloyed samples exhibited a nanorod framework structure. The Pt nanoparticles that formed in situ were supported and highly dispersed on the CeO₂ nanorod surface and had sizes in the range of 2-5 nm. For the catalyst prepared from the melt-spun Al_91.7Ce₈Pt_0.3 ribbons, the 50% CO conversion temperature (T₅₀) was 91 °C, and total CO could be converted when the temperature was increased to 113 °C. An X-ray photoelectron spectroscopy (XPS) test showed that the Pt_0.3/CeO₂ sample had a slightly richer oxygen vacancy; and a H₂ temperature-programmed reduction (H₂-TPR) test demonstrated its superior adsorption ability for reduction gas and high content of active oxygen species. The experiments indicated that the catalytic performance could be retained without any attenuation after 130 h when water and CO₂ were present in the reaction gas. The favorable catalytic activities were attributed to the high specific areas and small pore and Pt particle sizes as well as the strong interactions between the CeO₂ and Pt nanoparticles. The Pt nanoparticles were embedded in the surface of the CeO₂ nanorods, inhibiting growth. Therefore, the catalytic stability and water resistance were excellent.

Morphology-Dependent Catalytic Activity of Ru/CeO₂ in Dry Reforming of Methane

Three morphology-controlled CeO₂, namely nanorods (NRs), nanocubes (NCs), and nanopolyhedra (NPs), with different mainly exposed crystal facets of (110), (100), and (111), respectively, have been used as supports to prepare Ru (3 wt.%) nanoparticle-loaded catalysts. The catalysts were characterized by H₂-temperature programmed reduction (H₂-TPR), CO– temperature programmed desorption (CO-TPD), N₂ adsorption–desorption, X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (XDS). The characterization results showed that CeO₂-NRs, CeO₂-NCs, and CeO₂-NPs mainly expose (110), (100) and (111) facets, respectively. Moreover, CeO₂-NRs and CeO₂-NCs present higher oxygen vacancy concentration than CeO₂-NPs. In the CO₂ reforming of methane reaction, Ru/CeO₂-NR and Ru/CeO₂-NC catalysts showed better catalytic performance than Ru/CeO₂-NPs, indicating that the catalysts with high oxygen vacancy concentration are beneficial for promoting catalytic activity.

More than oxygen vacancies: a collective crystal-plane effect of CeO2 in gas-phase selective oxidation of benzyl alcohol

A collective crystal-plane effect of CeO₂ involves oxygen vacancies and the ability to abstract H, adsorb O₂ and remove water.

Improved NO–CO reactivity of highly dispersed Pt particles on CeO2 nanorod catalysts prepared by atomic layer deposition

Highly dispersed platinum (Pt) nanoparticles are deposited on CeO₂ nanorods via atomic layer deposition (ALD) to improve the catalytic activity towards the NO–CO reaction.

Nanofence Stabilized Platinum Nanoparticles Catalyst via Facet-Selective Atomic Layer Deposition

A facet-selective atomic layer deposition method is developed to fabricate oxide nanofence structure to stabilize Pt nanoparticles. CeO_x is selectively deposited on Pt nanoparticles' (111) facets and naturally exposes Pt (100) facets. The facet selectivity is realized through different binding energies of Ce precursor fragments chemisorbed on Pt (111) and Pt (100), which is supported by in situ mass gain experiment and corroborated by density functional theory simulations. Such nanofence structure not only has exposed Pt active facets for carbon monoxide oxidation but also forms ceria-metal interfaces that are beneficial for activity enhancement. The composite catalysts show excellent sintering resistance up to 700 °C calcination. CeO_x anchors Pt nanoparticles with a strong metal oxide interaction, and nanofence structure around Pt nanoparticles provides physical blocking that suppresses particles migration. The study reveals that forming oxide nanofence structure to encapsulate precious metal nanoparticles is an effective way to simultaneously enhance catalytic activity and thermal stability.

Platinum carbonyl clusters stabilized by Sn(ii)-based fragments: syntheses and structures of [Pt6(CO)6(SnCl2)2(SnCl3)4]4−, [Pt9(CO)8(SnCl2)3(SnCl3)2(Cl2SnOCOSnCl2)]4−and [Pt10(CO)14{Cl2Sn(OH)SnCl2}2]2−

Low valent Pt carbonyl clusters decorated by Sn(ii) fragments have been obtained from [Pt₁₅(CO)₃₀]²⁻and SnCl₂.

Multifunctional Fe2O3/CeO2 nanocomposites for free radical scavenging ultraviolet protection

In this study we synthesized Fe₂O₃/CeO₂ composite nanoparticles with high ultraviolet absorption and free radical scavenging properties for application as multifunctional ultraviolet (UV) filters.

Support Morphology-Dependent Catalytic Activity of Pd/CeO₂ for Formaldehyde Oxidation

To eliminate indoor formaldehyde (HCHO) pollution, Pd/CeO2 catalysts with different morphologies of ceria support were employed. The palladium nanoparticles loaded on {100}-faceted CeO2 nanocubes exhibited much higher activity than those loaded on {111}-faceted ceria nanooctahedrons and nanorods (enclosed by {100} and {111} facets). The HCHO could be fully converted into CO2 over the Pd/CeO2 nanocubes at a GHSV of 10,000 h(-1) and a HCHO inlet concentration of 600 ppm at ambient temperature. The prepared catalysts were characterized by a series of techniques. The HRTEM, ICP-MS and XRD results confirmed the exposed facets of the ceria and the sizes (1-2 nm) of the palladium nanoparticles with loading amounts close to 1%. According to the Pd 3d XPS and H2-TPR results, the status of the Pd-species was dependent on the morphologies of the supports. The {100} facets of ceria could maintain the metallic Pd species rather than the {111} facets, which promoted HCHO catalytic combustion. The Raman and O 1s XPS results revealed that the nanorods with more defect sites and oxygen vacancies were responsible for the easy oxidation of the Pd-species and low catalytic activity.

Shape-selective oriented cerium oxide nanocrystals permit assessment of the effect of the exposed facets on catalytic activity and oxygen storage capacity

The catalytic performance of a range of nanocrystalline CeO2 samples, prepared to have different morphologies, was measured using two accepted indicators; oxygen storage and diesel soot combustion. The same powders were characterized in detail by HR-TEM, XRD, XPS, and Raman methods. The study demonstrates that activity is determined by the relative fraction of the active crystallographic planes, not by the specific surface area of the powders. The physical study is a step toward quantitative evaluation of the relative contribution to activity of the different facets. The synthetic protocol permits fabrication of CeO2 nanostructures with preferentially grown active planes, and therefore has potential in developing catalytic applications and in nanocompositing.

Copper doped ceria porous nanostructures towards a highly efficient bifunctional catalyst for carbon monoxide and nitric oxide elimination

Cu²⁺ doped CeO₂ porous nanomaterials were synthesized by calcining CeCu–MOF nanocrystals. They exhibited a superior bifunctional catalytic performance for CO oxidation and selective catalytic reduction of NO.

Copper doped ceria porous nanostructures with a tunable BET surface area were prepared using an efficient and general metal–organic-framework-driven, self-template route. The XRD, SEM and TEM results indicate that Cu²⁺ was successfully substituted into the CeO₂ lattice and well dispersed in the CeO₂:Cu²⁺ nanocrystals. The CeO₂:Cu²⁺ nanocrystals exhibit a superior bifunctional catalytic performance for CO oxidation and selective catalytic reduction of NO. Interestingly, CO oxidation reactivity over the CeO₂:Cu²⁺ nanocrystals was found to be dependent on the Cu²⁺ dopants and BET surface area. By tuning the content of Cu²⁺ and BET surface area through choosing different organic ligands, the 100% conversion temperature of CO over CeO₂:Cu²⁺ nanocrystals obtained from thermolysis of CeCu–BPDC nanocrystals can be decreased to 110 °C. The porous nanomaterials show a high CO conversion rate without any loss in activity even after five cycles. Furthermore, the activity of the catalysts for NO reduction increased with the increase of BET surface, which is in accordance with the results of CO oxidation.