Red-light-absorbing diimine Pt(II) bisacetylide complexes showing near-IR phosphorescence and long-lived 3IL excited state of Bodipy for application in triplet-triplet annihilation upconversion

Design, Synthesis, and Characterization of Organometallic BODIPY-Ru(II) Dyads: Redox and Photophysical Properties with Singlet Oxygen Generation Capability†

A series of Ru(II)-acetylide complexes (Ru1, Ru2, and Ru1m) with alkynyl-functionalized borondipyrromethene (BODIPY) conjugates were designed by varying the position of the linker that connects the BODIPY unit to the Ru(II) metal center through acetylide linkage at either the 2-(Ru1) and 2,6-(Ru2) or the meso-phenyl (Ru1m) position of the BODIPY scaffold. The Ru(II) organometallic complexes were characterized by various spectroscopic methods, including nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, CHN, and high-resolution mass spectrometry (HRMS) analyses. The Ru(II)-BODIPY conjugates exhibit fascinating electrochemical and photophysical properties. All BODIPY-Ru(II) complexes exhibit strong absorption (εmax = 29,000-72,000 M-1 cm-1) in the visible region (λmax = 502-709 nm). Fluorescence is almost quenched for Ru1 and Ru2, whereas Ru1m shows the residual fluorescence of the corresponding BODIPY core at 517 nm. The application of the BODIPY-Ru(II) dyads as nonporphyrin-based triplet photosensitizers was explored by a method involving the singlet oxygen (1O2)-mediated photo-oxidation of diphenylisobenzofuran. Effective π-conjugation between the BODIPY chromophore and Ru(II) center in the case of Ru1 and Ru2 was found to be necessary to improve intersystem crossing (ISC) and hence the 1O2-sensitizing ability. In addition, electrochemical studies indicate electronic interplay between the metal center and the redox-active BODIPY in the BODIPY-Ru(II) dyads.

Platinum(II) diimine complexes containing phenylpyridine ligands decorated with anionic closo-monocarborane clusters [CB11H12]. Dalton Trans 2023;52:3249-3253. [PMID: 36852922 DOI: 10.1039/d3dt00136a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

We report three Pt(II) diimine complexes containing ancillary ligands of phenylpyridine furnished with anionic closo-monocarborane clusters [CB₁₁H₁₂]^-. Three neutral complexes exhibit intensive phosphorescence in the solid state and complex 1 was used to detect acetonitrile vapor in a quartz plate.

Time-resolved color-changing long-afterglow for security systems based on metal–organic hybrids

Himpc-based phosphors exhibit diverse afterglow performances by modulating molecular aggregation dispositions for anti-counterfeiting application.

An Ultra-Long-Lived Triplet Excited State in Water at Room Temperature: Insights on the Molecular Design of Tridecafullerenes

Suitably engineered molecular systems exhibiting triplet excited states with very long lifetimes are important for high-end applications in nonlinear optics, photocatalysis, or biomedicine. We report the finding of an ultra-long-lived triplet state with a mean lifetime of 93 ms in an aqueous phase at room temperature, measured for a globular tridecafullerene with a highly compact glycodendrimeric structure. A series of three tridecafullerenes bearing different glycodendrons and spacers to the C60 units have been synthesized and characterized. UV/Vis spectra and DLS experiments confirm their aggregation in water. Steady-state and time-resolved fluorescence experiments suggest a different degree of inner solvation of the multifullerenes depending on their molecular design. Efficient quenching of the triplet states by O2 but not by waterborne azide anions has been observed. Molecular modelling reveals dissimilar access of the aqueous phase to the internal structure of the tridecafullerenes, differently shielded by the glycodendrimeric shell.

Neutral iridium(iii) complexes bearing BODIPY-substituted N-heterocyclic carbene (NHC) ligands: synthesis, photophysics, in vitro theranostic photodynamic therapy, and antimicrobial activity

The synthesis, photophysics, and photobiological activities of a series of novel neutral heteroleptic cyclometalated iridium(iii) complexes incorporating boron dipyrromethene (BODIPY) substituted N-heterocyclic carbene (NHC) ligands (Ir1-Ir5) are reported. The effect of the substitution position of BODIPY on the NHC ligands, either on C4 of the phenyl ring (Ir1-Ir3) or C5 of the benzimidazole unit (Ir4 and Ir5), and its linker type (single or triple bond) on the photophysical properties was studied. Ir1-Ir5 exhibited BODIPY-localized intense 1IL (intraligand transition)/1MLCT (metal-to-ligand charge transfer) absorption at 530-543 nm and 1,3IL/1,3CT (charge transfer) emission at 582-610 nm. The nanosecond transient absorption results revealed that the lowest triplet excited states of these complexes were the BODIPY-localized 3π,π* states. Complexes Ir4 and Ir5 exhibited blue-shifted 1IL absorption and 1,3IL/1,3CT emission bands compared to the corresponding absorption and emission bands in complexes Ir1 and Ir3. However, replacing the methyl substituents on N3 of benzimidazole in complexes Ir1 and Ir4 with oligoether substituents in Ir3 and Ir5, respectively, did not impact the energies of the low-energy absorption and emission bands in the corresponding complexes. Water-soluble complexes Ir3 and Ir5 have been explored as photosensitizers for in vitro photodynamic therapy (PDT) effects toward human SKMEL28 melanoma cells. Ir3 showed no dark cytotoxicity (EC50 > 300 μM) but good photocytotoxic activity (9.66 ± 0.28 μM), whereas Ir5 exhibited a higher dark cytotoxicity (20.2 ± 1.26 μM) and excellent photocytotoxicity (0.15 ± 0.01 μM). The phototherapeutic indices with visible light (400-700 nm) activation were >31 for Ir3 and 135 for Ir5. Ir3 and Ir5 displayed 1O2 quantum yields of 38% and 22% in CH3CN, respectively, upon 450 nm excitation. Ir5 was more effective at generating reactive oxygen species (ROS) in vitro. Ir5 was also active against Staphylococcus aureus upon visible light activation, with a phototherapeutic index of >15 and EC50 value of 6.67 μM. These photobiological activities demonstrated that these neutral Ir(iii) complexes are promising in vitro PDT reagents, and substitution at C5 on the benzimidazole group of the NHC ligand was superior to C4 substitution on the phenyl ring.

Cyclometalated iridium-BODIPY ratiometric O2 sensors

Here we introduce a new class of ratiometric O2 sensors for hypoxic environments. Two-component structures composed of phosphorescent cyclometalated Ir(iii) complexes and the well-known organic fluorophore BODIPY have been prepared by the 1 : 1 reaction of bis-cyclometalated iridium synthons with pyridyl-substituted BODIPY compounds. Two different cyclometalating ligands are used, which determine the relative energies of the iridium-centered and BODIPY-centered excited states, and the nature of the linker between iridium and BODIPY also has a small influence on the photoluminescence. Some of the conjugates exhibit dual emission, with significant phosphorescence from the iridium site and fluorescence from the BODIPY, and thus function as ratiometric oxygen sensors. Oxygen quenching experiments demonstrate that as O2 is added the phosphorescence is quenched while the fluorescence is unaffected, with dynamic ranges that are well suited for hypoxic sensing (pO2 < 160 mmHg).

Spectroscopic and 1O2 Sensitization Characteristics of a Series of Isomeric Re(bpy)(CO)3Cl Complexes Bearing Pendant BODIPY Chromophores

Two new Re(I)bipyridyltricarbonyl chloride complexes, Re(BB3)(CO)₃Cl and Re(BB4)(CO)₃Cl, featuring BODIPY groups appended to the 5,5'- or 6,6'-positions of the bipyridine ligand, respectively, were synthesized as structurally isomeric compliments to a previously reported 4,4'-substituted homologue, Re(BB2)(CO)₃Cl. X-ray crystal structures of the compounds show that the 4,4'-, 5,5'-, and 6,6'-substitution patterns place the BODIPY groups at progressively shorter distances of 9.43, 8.39, and 5.56 Å, respectively, from the complexes' Re centers. The photophysical properties of the isomeric complexes were investigated to ascertain the manner in which the heavy rhenium atom might induce intersystem crossing of the pendant BODIPY moieties positioned at progressively shorter through-space distances. Electronic absorption spectroscopy revealed that the three metal complexes retain the strong visible absorption features characteristic of the bpyBODIPY (BB2-BB4) ligands; however, the fluorescence of the parent borondipyrromethane appended ligands is attenuated by more than an order of magnitude in Re(BB2)(CO)₃Cl and Re(BB3)(CO)₃Cl and by more than two orders of magnitude in Re(BB4)(CO)₃Cl. Furthermore, phosphorescence from Re(BB4)(CO)₃Cl is observed under a nitrogen atmosphere, consistent with highly efficient ISC to the triplet-excited state. Singlet oxygen sensitization studies confirm that all three complexes produce singlet oxygen with quantum yields that increase as the distance of the BODIPY groups to the heavy rhenium center is decreased. The trends observed across the series of rhenium complexes with respect to emission and ¹O₂ sensitization properties can be rationalized in terms of the varied distal separation between the metal center and BODIPY groups in each system.

Application of a bodipy-C70 dyad in triplet-triplet annihilation upconversion of perylene as a metal-free photosensitizer

A bodipy-C70 dyad was synthesized and applied in triplet-triplet annihilation (TTA) upconversion of perylene as a novel metal-free organic photosensitizer. The photophysical processes were investigated by the methods of steady-state UV-Vis absorption and fluorescence spectroscopy, nanosecond time-resolved transient absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The bodipy-C70 dyad showed an increased molar extinction coefficient up to 82 300 mol-1 cm-1 at 518 nm compared with the C70 monomer. With photo-excitation of the bodipy moiety at 532 nm, the intramolecular singlet-singlet energy transfer between bodipy and C70 units was efficient with a quantum yield of nearly 100%, and the lowest triplet state of the dyad was subsequently populated via ISC of the C70 moiety, with a lifetime of ca. 80 μs in toluene. Electrochemical investigation suggested that the intramolecular electron transfer of the excited dyad was thermodynamically prohibited in toluene due to the positive ΔGCS for charge-separation. With the presence of perylene in solution as the triplet energy acceptor and emitter, the TTA upconverted fluorescence was observed with a maximum quantum yield of 10.3%. The overall upconversion capability of 4417 M-1 cm-1 exceeded that of C70 approximately two-fold. Moreover, the bodipy-C70 dyad also exhibited an enhanced optical stability under intense irradiation. All data indicated that the dyad was another ideal photosensitizer for TTA upconversion of perylene in the fullerene derivative family.

Highly luminescent palladium(ii) complexes with sub-millisecond blue to green phosphorescent excited states. Photocatalysis and highly efficient PSF-OLEDs

Palladium(ii) complexes supported by tetradentate [N^C^C^N] and [O^N^C^N] ligand systems display sky blue to red phosphorescence with emission quantum yields and emission lifetimes up to 0.64 and 272 μs, respectively. Femtosecond time-resolved fluorescence (fs-TRF) measurements on these Pd(ii) complexes reveal a fast intersystem crossing from singlet to triplet manifolds with time constants of 0.6-21 ps. DFT/TDDFT calculations revealed that, as a result of the spiro-fluorene and bridging tertiary amine units of the ligands, the T1 excited state is more ligand-localized and has smaller structural distortion, leading to slower non-radiative decay as well as radiative decay of T1 → S0 transition and thereby highly emissive, long-lived triplet excited states. The Pd(ii) complexes have been found to be efficient catalysts for visible light-driven, reductive C-C bond formation from unactivated alkyl bromides with conversions and yields of up to 90% and 83%, respectively. These complexes have also been employed as photosensitizers for [2 + 2] cycloaddition of styrenes, with conversions and yields comparable to those of the reported Ir(iii) complexes. Both green and sky blue organic-light emitting devices (OLEDs) have been generated with these Pd(ii) complexes as guest emitters. Maximum external quantum efficiencies (EQE) of up to 16.5% have been achieved in the sky blue OLEDs. The long emission lifetimes render the Pd(ii) complexes good sensitizers for phosphor-sensitized fluorescent OLEDs (PSF-OLEDs). By utilizing these phosphorescent Pd(ii) complexes as sensitizers, highly efficient green and yellow PSF-OLEDs having high EQE (up to 14.3%), high colour purity and long operation lifetimes, with 90% of initial luminance (LT90) for more than 80 000 h, have been realized.

Ultralong Persistent Room Temperature Phosphorescence of Metal Coordination Polymers Exhibiting Reversible pH-Responsive Emission

Ultra-long-persistent room temperature phosphorescence (RTP) materials have attracted much attention and present various applications in illumination, displays, and the bioimaging field; however, the persistent RTP is generally from the inorganic phosphor materials to date. Herein, we show that the metal coordination polymers (CPs) could be new types of emerging long-lived RTP materials for potential sensor applications. First, two kinds of Cd-based CPs, Cd(m-BDC)(H2O) (1) and Cd(m-BDC)(BIM) (2) (m-BDC = 1,3-benzenedicarboxylic acid; BIM = benzimidazole), were obtained through a hydrothermal process, and the samples were found to exhibit two-dimensional layered structures, which are stabilized by interlayer C-H···π interaction and π···π interaction, respectively. The CPs show unexpected second-time-scale ultra-long-persistent RTP after the removal of UV excitation, and this persistent emission can be detected easily on a time scale of 0-10 s. The CPs also feature a tunable luminescence decay lifetime by adjusting their coordination situation and packing fashion of ligands. Theoretical calculation further indicates that the introduction of the second ligand could highly influence the electronic structure and intermolecular electron transfer toward tailoring the RTP of the CP materials. Moreover, CP 2 exhibits well-defined pH- and temperature-dependent phosphorescence responses. Therefore, this work provides a facile way to develop new type of CPs with steady-state and dynamic tuning of the RTP properties from both experimental and theoretical perspectives, which have potential applications in the areas of displays, pH/temperature sensors, and phosphorescence logic gates. On account of suitable incorporation of inorganic and organic building blocks, it can be expected that the ultra-long-persistent RTP CPs can be extended to other similar systems due to the highly tunable structures and facile synthesis routes.

Rigid tetrazine fluorophore conjugates with fluorogenic properties in the inverse electron demand Diels-Alder reaction

1,2,4,5-Tetrazine fluorophore derivatives with structurally rigid molecular designs were synthesized using Sonogashira and Stille cross-coupling as well as copper-catalyzed azide-alkyne cycloaddition. The synthesized bichromophoric systems exhibit low fluorescence quantum yields due to quenching by the tetrazine. The extent of fluorescence quenching observed for those systems was shown to depend on the distance between the fluorophore and the tetrazine. The decreased fluorescence is "turned on" by conversion of the tetrazine in the inverse electron demand Diels-Alder cycloaddition. Time resolved spectroscopy indicated resonance energy transfer between BODIPY and the tetrazine as the underlying quenching mechanism. The synthesized conjugates were successfully applied in protein labeling experiments.

Accessing the Long-Lived Triplet Excited States in Transition-Metal Complexes: Molecular Design Rationales and Applications

Transition-metal complex triplet photosensitizers are versatile compounds that have been widely used in photocatalysis, photovoltaics, photodynamic therapy (PDT) and triplet-triplet annihilation (TTA) upconversion. The principal photophysical processes in these applications are the intermolecular energy transfer or electron transfer. One of the major challenges facing these triplet photosensitizers is the short triplet-state lifetime, which is detrimental to the above-mentioned photophysical processes. In order to address this challenge, transition-metal complexes showing long-lived triplet excited states are highly desired. This review article summarizes the development of this fascinating area, including the molecular design rationales, the principal photophysical properties, and the applications of these complexes in PDT and TTA upconversion.

Luminescence switching of a persistent room-temperature phosphorescent pure organic molecule in response to external stimuli

A metal- and heavy atom-free nonplanar organic molecule with persistent RTP was successfully fabricated and exhibited a multicolour phosphorescence-to-fluorescence switching property in response to mechanical force stimuli.

The triplet excited state of Bodipy: formation, modulation and application

The accessing of the triplet excited state of one of the most popular fluorophores, boron-dipyrromethene (Bodipy), was summarized.

MLCT sensitizers in photochemical upconversion: past, present, and potential future directions

This frontier presentation highlights the historical development of MLCT sensitizers in photochemical upconversion while indentifying current state-of-the-art and exciting opportunities in this arena moving towards the future.

Synthesis, characterization, photophysics, and anion binding properties of platinum(ii) acetylide complexes with urea group

The relationship between the structure and anion-binding ability of platinum(ii) acetylide complexes with urea group has been studied.

Switching of the photophysical properties of Bodipy-derived trans bis(tributylphosphine) Pt(ii) bisacetylide complexes with rhodamine as the acid-activatable unit

A rhodamine moiety was used in two Bodipy-derived trans bis(tributylphosphine) Pt(ii) bisacetylide complexes for switching the photophysical properties of the complexes.

Triplet–triplet annihilation photon-upconversion: towards solar energy applications

This perspective discusses recent progress in photon upconversion systems and devices for solar energy applications.