Single cell detection using a magnetic zigzag nanowire biosensor

Formation and culture of cell spheroids by using magnetic nanostructures resembling a crown of thorns

In contrast to traditional two-dimensional cell-culture conditions, three-dimensional (3D) cell-culture models closely mimic complexin vivoconditions. However, constructing 3D cell culture models still faces challenges. In this paper, by using micro/nano fabrication method, including lithography, deposition, etching, and lift-off, we designed magnetic nanostructures resembling a crown of thorns. This magnetic crown of thorns (MCT) nanostructure enables the isolation of cells that have endocytosed magnetic particles. To assess the utility of this nanostructure, we used high-flux acquisition of Jurkat cells, an acute-leukemia cell line exhibiting the native phenotype, as an example. The novel structure enabled Jurkat cells to form spheroids within just 30 min by leveraging mild magnetic forces to bring together endocytosed magnetic particles. The size, volume, and arrangement of these spheroids were precisely regulated by the dimensions of the MCT nanostructure and the array configuration. The resulting magnetic cell clusters were uniform in size and reached saturation after 1400 s. Notably, these cell clusters could be easily separated from the MCT nanostructure through enzymatic digestion while maintaining their integrity. These clusters displayed a strong proliferation rate and survival capabilities, lasting for an impressive 96 h. Compared with existing 3D cell-culture models, the approach presented in this study offers the advantage of rapid formation of uniform spheroids that can mimicin vivomicroenvironments. These findings underscore the high potential of the MCT in cell-culture models and magnetic tissue enginerring.

Self-Assembled Hexagonal Superparamagnetic Cone Structures for Fabrication of Cell Cluster Arrays

In this study, we demonstrated that arrays of cell clusters can be fabricated by self-assembled hexagonal superparamagnetic cone structures. When a strong out-of-plane magnetic field was applied to the ferrofluid on a glass substrate, it will induce the magnetic poles on the upper/lower surfaces of the continuous ferrofluid to increase the magnetostatic energy. The ferrofluid will then experience hydrodynamic instability and be split into small droplets with cone structures because of the compromising surface tension energy and magnetostatic energy to minimize the system's total energy. Furthermore, the ferrofluid cones were orderly self-assembled into hexagonal arrays to reach the lowest energy state. After dehydration of these liquid cones to form solid cones, polydimethylsiloxane was cast to fix the arrangement of hexagonal superparamagnetic cone structures and prevent the leakage of magnetic nanoparticles. The U-343 human neuronal glioblastoma cells were labeled with magnetic nanoparticles through endocytosis in co-culture with a ferrofluid. The number of magnetic nanoparticles internalized was (4.2 ± 0.84) × 10⁶ per cell by the cell magnetophoresis analysis. These magnetically labeled cells were attracted and captured by hexagonal superparamagnetic cone structures to form cell cluster arrays. As a function of the solid cone size, the number of cells captured by each hexagonal superparamagnetic cone structure was increased from 48 to 126 under a 2000 G out-of-plane magnetic field. The local magnetic field gradient of the hexagonal superparamagnetic cone was 117.0-140.9 G/mm from the cell magnetophoresis. When an external magnetic field was applied, we observed that the number of protrusions of the cell edge decreased from the fluorescence images. It showed that the local magnetic field gradient caused by the hexagonal superparamagnetic cones restricted the cell growth and migration.

Recent progress in magnetic nanoparticles: synthesis, properties, and applications

The rapid development of advanced nanotechnology has continuously changed many aspects of society. One important nanostructured material, magnetic nanoparticles (NPs), has applications in many areas including clean energy, biology and engineering because of their special magnetic properties. The synthesis of magnetic nanomaterials with desired sizes and morphology has attracted great attention. Nanomaterials with different properties can be combined to construct multifunctional nanoplatforms through systematic surface engineering. The surface modification of magnetic NPs presents the opportunity for them to be used in many practical applications. Functionalized magnetic NPs have been successfully applied in catalysis, as thermoelectric materials, for drug delivery, as imaging agents in nuclear magnetic resonance and in biosensors. In this review, synthetic methods for magnetic NPs and some of their important properties are described. Then the latest progress of the application of magnetic NPs in energy and biology has been summarized and discussed. Finally, we discuss some issues that still need to be solved and the prospects for magnetic NPs.

Magnetic micro/nanoparticle flocculation-based signal amplification for biosensing

We report a time and cost efficient signal amplification method for biosensors employing magnetic particles. In this method, magnetic particles in an applied external magnetic field form magnetic dipoles, interact with each other, and accumulate along the magnetic field lines. This magnetic interaction does not need any biomolecular coating for binding and can be controlled with the strength of the applied magnetic field. The accumulation can be used to amplify the corresponding pixel area that is obtained from an image of a single magnetic particle. An application of the method to the Escherichia coli 0157:H7 bacteria samples is demonstrated in order to show the potential of the approach. A minimum of threefold to a maximum of 60-fold amplification is reached from a single bacteria cell under a magnetic field of 20 mT.

Quantitative 3D electromagnetic field determination of 1D nanostructures from single projection

One-dimensional (1D) nanostructures have been regarded as the most promising building blocks for nanoelectronics and nanocomposite material systems as well as for alternative energy applications. Although they result in confinement of a material, their properties and interactions with other nanostructures are still very much three-dimensional (3D) in nature. In this work, we present a novel method for quantitative determination of the 3D electromagnetic fields in and around 1D nanostructures using a single electron wave phase image, thereby eliminating the cumbersome acquisition of tomographic data. Using symmetry arguments, we have reconstructed the 3D magnetic field of a nickel nanowire as well as the 3D electric field around a carbon nanotube field emitter, from one single projection. The accuracy of quantitative values determined here is shown to be a better fit to the physics at play than the value obtained by conventional analysis. Moreover the 3D reconstructions can then directly be visualized and used in the design of functional 3D architectures built using 1D nanostructures.

Versatile method for template-free synthesis of single crystalline metal and metal alloy nanowires

Metal and metal alloy nanowires have applications ranging from spintronics to drug delivery, but high quality, high density single crystalline materials have been surprisingly difficult to fabricate. Here we report a versatile, template-free, self-assembly method for fabrication of single crystalline metal and metal alloy nanowires (Co, Ni, NiCo, CoFe, and NiFe) by reduction of metal nitride precursors formed in situ by reaction of metal salts with a nitrogen source. Thiol reduction of the metal nitrides to the metallic phase at 550-600 °C results in nanowire growth. In this process, sulfur acts as a uniaxial structure-directing agent, passivating the surface of the growing nanowires and preventing radial growth. The versatility of the method is demonstrated by achieving nanowire growth from gas-phase, solution-phase or a combination of gas- and solution-phase precursors. The fabrication method is suited to large-area CVD on a wide range of solid substrates.

Multisegmented FeCo/Cu nanowires: electrosynthesis, characterization, and magnetic control of biomolecule desorption

In this paper, we report on the synthesis of FeCo/Cu multisegmented nanowires by means of pulse electrodeposition in nanoporous anodic aluminum oxide arrays supported on silicon chips. By adjustment of the electrodeposition conditions, such as the pulse scheme and the electrolyte, alternating segments of Cu and ferromagnetic FeCo alloy can be fabricated. The segments can be built with a wide range of lengths (15-150 nm) and exhibit a close-to-pure composition (Cu or FeCo alloy) as suggested by energy-dispersive X-ray mapping results. The morphology and the crystallographic structure of different nanowire configurations have been assessed thoroughly, concluding that Fe, Co, and Cu form solid solution. Magnetic characterization using vibrating sample magnetometry and magnetic force microscopy reveals that by introduction of nonmagnetic Cu segments within the nanowire architecture, the magnetic easy axis can be modified and the reduced remanence can be tuned to the desired values. The experimental results are in agreement with the provided simulations. Furthermore, the influence of nanowire magnetic architecture on the magnetically triggered protein desorption is evaluated for three types of nanowires: Cu, FeCo, and multisegmented FeCo15nm/Cu15nm. The application of an external magnetic field can be used to enhance the release of proteins on demand. For fully magnetic FeCo nanowires the applied oscillating field increased protein release by 83%, whereas this was found to be 45% for multisegmented FeCo15nm/Cu15nm nanowires. Our work suggests that a combination of arrays of nanowires with different magnetic configurations could be used to generate complex substance concentration gradients or control delivery of multiple drugs and macromolecules.

Photonic crystal based microscale flow cytometry

Here we propose a new design of an on-chip micro-flow cytometry based on photonic crystals. When individual cells flow tangential to the crystal surface, the transmission of the light through the photonic crystal changes depending on the presence or absence of the cells and their size and shape. This system was modeled using OptiFDTD, where transmission spectra were extracted. Initially, the potential for cell counting has been demonstrated. Then, for cells with differing shape a direct relation between signal distribution and cell shape has been found.

Ultracompact three-dimensional tubular conductivity microsensors for ionic and biosensing applications

We present ultracompact three-dimensional tubular structures integrating Au-based electrodes as impedimetric microsensors for the in-flow determination of mono- and divalent ionic species and HeLa cells. The microsensors show an improved performance of 2 orders of magnitude (limit of detection = 0.1 nM for KCl) compared to conventional planar conductivity detection systems integrated in microfluidic platforms and the capability to detect single HeLa cells in flowing phosphate buffered saline. These highly integrated conductivity tubular sensors thus open new possibilities for lab-in-a-tube devices for bioapplications such as biosensing and bioelectronics.

Single cell detection using 3D magnetic rolled-up structures

A 3D rolled-up structure made of a SiO2 layer and a fishbone-like magnetic thin film was proposed here as a biosensor. The magnetoresistance (MR) measurement results of the sensor suggest that the presence of the stray field, which is induced by the magnetic nanoparticles, significantly increased the switching field. Comparing the performance of the 2D sensor and 3D sensor designed in this study, the response in switching field variation was 12.14% in the 2D sensor and 62.55% in the 3D sensor. The response in MR ratio variation was 4.55% in the 2D sensor and 82.32% in the 3D sensor. In addition, the design of the 3D sensor structure also helped to attract and trap a single magnetic cell due to its stronger stray field compared with the 2D structure. The 3D magnetic biosensor designed here can provide important information for future biochip research and applications.