Proteomic and morphological insights into the exposure of Cupriavidus metallidurans CH34 planktonic cells and biofilms to aluminium

Aluminium (Al) is one of the most popular materials for industrial and domestic use. Nevertheless, research has proven that this metal can be toxic to most organisms. This light metal has no known biological function and to date very few aluminium-specific biological pathways have been identified. In addition, information about the impact of this metal on microbial life is scarce. Here, we aimed to study the effect of aluminium on the metal-resistant soil bacterium Cupriavidus metallidurans CH34 in different growth modes, i.e. planktonic cells, adhered cells and mature biofilms. Our results indicated that despite a significant tolerance to aluminium (minimal inhibitory concentration of 6.25 mM Al₂(SO₄)₃.18H₂O), the exposure of C. metallidurans to a sub-inhibitory dose (0.78 mM) caused early oxidative stress and an increase in hydrolytic activity. Changes in the outer membrane surface of planktonic cells were observed, in addition to a rapid disruption of mature biofilms. On protein level, aluminium exposure increased the expression of proteins involved in metabolic activity such as pyruvate kinase, formate dehydrogenase and poly(3-hydroxybutyrate) polymerase, whereas proteins involved in chemotaxis, and the production and transport of iron scavenging siderophores were significantly downregulated.

Synergistic effects of a functional bacterial consortium on enhancing phenanthrene biodegradation and counteracting rare earth biotoxicity in liquid and slurry systems

The biodegradation of polycyclic aromatic hydrocarbons (PAHs) by microorganisms in the environment is often inhibited by coexisting metal ions. The aim of this work is to study a bacterial consortium for enhancing phenanthrene biodegradation under the inhibition effect of the rare earth (RE) ions Ce³⁺ and Y³⁺ . This bacterial consortium was composed of two bacteria, namely, the RE-adsorbing Bacillus subtilis MSP117 and the phenanthrene-degrading Moraxella osloensis CFP312. Ce³⁺ and Y³⁺ at the concentration of 1.15 mmol L^-1 inhibited CFP312 from degrading phenanthrene but not glucose. Using glucose as a co-substrate could promote the proliferation of CFP312 but decreased phenanthrene degradation. Adsorption experiments and electron microscopy imaging showed that CFP312 had no RE ions adsorption capacity for RE ions and that RE elements could not be observed on its cell surfaces. MSP117 could adsorb 0.14 and 0.12 mmol g^-1 wet cells of Ce³⁺ and Y³⁺ in aqueous solution, respectively, thus demonstrating considerable adsorption capacity. The MSP117 cell surface immobilized part of the free RE ions and reduced their bioaccessibility, thereby alleviating their biotoxic effect on phenanthrene degradation by CFP312. In liquid and slurry systems, glucose, which was used as the co-substrate of the bacterial consortium, must be kept at a low level to avoid the catabolism repression of phenanthrene degradation by CFP312.

Chelate chemistry governs ion-specific stiffening of Bacillus subtilis B-1 and Azotobacter vinelandii biofilms

Unwanted formation of bacterial biofilms can cause problems in both the medical sector and industrial settings. However, removing them from surfaces remains an ongoing challenge since biofilm bacteria efficiently protect themselves from external influences such as mechanical shear forces by embedding themselves into a matrix of extracellular polymeric substances. Here, we discuss microscopic principles, which are responsible for alterations in the viscoelastic properties of biofilms upon contact with metal ions. We suggest that it is a combination of mainly two parameters, that decides if biofilm stiffening occurs or not: the ion size and the detailed configuration of polyanionic macromolecules from the biofilm matrix. Our results provide new insights in the molecular mechanisms that govern the mechanical properties of biofilms. Also, they indicate that hydrogels comprising purified biopolymers can serve as suitable model systems to reproduce certain aspects of biofilm mechanics - provided that the correct biopolymer is chosen.

In vitro evaluation of mercury (Hg2+) effects on biofilm formation by clinical and environmental isolates of Klebsiella pneumoniae

The increase in urbanization and industrialization has contributed to the contamination of different environments by means of xenobiotic compounds, such as heavy metals, causing changes in microbial communities. Among these metals, the Mercury (Hg²⁺) is one the most prevalent toxic metals for the environment The present study aimed to evaluate the effect of mercury on the formation of biofilm by environmental (collected from urban stream water) and clinical isolates of Klebsiella pneumoniae. In addition, antibiotic resistance, virulence factors, and genetic diversity were investigated. Taxonomic identity of eight isolates (one reference, two clinical, and five environmental isolates) was performed by MALDI-TOF-MS, while the antibiotic susceptibility profile was assessed by the disc diffusion method. The ability to form biofilms was evaluated by culture on Congo red agar and by crystal violet staining. Biofilm structure was analyzed by scanning electron microscopy. The hydrophobicity profile and the presence of the virulence genes cps, fimH, and mrkD was investigated. The presence of merA and its relationship with antimicrobial resistance were also assessed. The identity of all isolates was confirmed by MALDI-TOF-MS, and different profiles of resistance to mercury and antibiotics as well as of biofilm formation were identified for the clinical and environmental isolates. All isolates were hydrophilic and positive for the virulence genes cps, fimH, and mrkD; only the clinical isolate K36-A2 was positive for merA. The diversity of the isolates was confirmed by ERIC-PCR, which revealed high heterogeneity among the isolates. In conclusion, the data demonstrate that the investigated isolates present different responses to exposure to Hg²⁺ and correspond to distinct populations of K. pneumoniae disseminated in the investigated environment. The data obtained in this work will aid in understanding the mechanisms of survival of this pathogen under adverse conditions.

Metabolomic and proteomic changes induced by growth inhibitory concentrations of copper in the biofilm-forming marine bacteriumPseudoalteromonas lipolytica

Copper exposure inP. lipolyticaTC8 revealed changes in cell membrane lipid composition and in copper cell homeostasis protein regulation.

Nitric oxide increases biofilm formation in Saccharomyces cerevisiae by activating the transcriptional factor Mac1p and thereby regulating the transmembrane protein Ctr1

BACKGROUND

Biofilms with immobilized cells encased in extracellular polymeric substance are beneficial for industrial fermentation. Their formation is regulated by various factors, including nitric oxide (NO), which is recognized as a quorum-sensing and signal molecule. The mechanisms by which NO regulates bacterial biofilms have been studied extensively and deeply, but were rarely studied in fungi. In this study, we observed the effects of low concentrations of NO on biofilm formation in Saccharomyces cerevisiae. Transcriptional and proteomic analyses were applied to study the mechanism of this regulation.

RESULTS

Adding low concentrations of NO donors (SNP and NOC-18) enhanced biofilm formation of S. cerevisiae in immobilized carriers and plastics. Transcriptional and proteomic analyses revealed that expression levels of genes regulated by the transcription factor Mac1p was upregulated in biofilm cells under NO treatment. MAC1 promoted yeast biofilm formation which was independent of flocculation gene FLO11. Increased copper and iron contents, both of which were controlled by Mac1p in the NO-treated and MAC1-overexpressing cells, were not responsible for the increased biofilm formation. CTR1, one out of six genes regulated by MAC1, plays an important role in biofilm formation. Moreover, MAC1 and CTR1 contributed to the cells' resistance to ethanol by enhanced biofilm formation.

CONCLUSIONS

These findings suggest that a mechanism for NO-mediated biofilm formation, which involves the regulation of CTR1 expression levels by activating its transcription factor Mac1p, leads to enhanced biofilm formation. The role of CTR1 protein in yeast biofilm formation may be due to the hydrophobic residues in its N-terminal extracellular domain, and further research is needed. This work offers a possible explanation for yeast biofilm formation regulated by NO and provides approaches controlling biofilm formation in industrial immobilized fermentation by manipulating expression of genes involved in biofilm formation.

Comparative copper toxicity impact and enzymatic cascade effect on Biosorption Activated Media and woodchips for nutrient removal in stormwater treatment

Copper, a commonly occurring heavy metal in stormwater runoff, was tested for its inhibitory effects on key nitrogen cycle bacteria in Biosorption Activated Media (BAM) and woodchip. The information in this paper is used to show that copper can enhance the denitrification process through enzyme cascade reactions since nitrous reductase is the enzyme responsible for the last step of denitrification and is largely dependent on copper as its cofactor. However, media characteristics are critical for assessing multi-enzymatic cascade reactions from the microbial ecology point of view. Moreover, both media showed significant copper removal through various mechanisms at 30 cm depth. The bioactivity evaluation indicates that other bacteria (fermentative bacteria, etc.) can be largely depressed with the presence of copper, hence the biofilm structure would be more vulnerable under shearing effects, which may result in holistic depression on the microbial community.

Assessment of water samples with complex compositions using microalgal bioassay based on the community level physiological profiling (CLPP)

The ability to effectively characterize the response of microalgal communities to changes in water quality is limited. Earlier, a microalgal bioassay was developed based on community level physiological profiling (CLPP). The efficacy of this assay was evaluated using three wetland water samples, a surface water sample, and two wastewater samples (i.e. primary and secondary), all collected from southwestern Ontario, Canada. In addition, the assay was applied to untreated and activated carbon treated oil sand process water (OSPW). YT (Yeast Identification Test Panel) and Biolog plates were successfully utilized for defined microalgal community under both heterotrophic and mixotrophic growth conditions to characterize the changes in the defined microalgal community due to the changes in water type. It was found that, although the degrees of changes in the algal community varied, all tested water samples were distinguished under both growth regimes using principal component analysis (PCA). The variations in the algal community were caused by the differences of the water samples. The response of the assay due to changes in the algal community caused by different waters was found to be very sensitive and could be used to differentiate different water bodies. It further can be used to monitor temporal changes of water quality of the same water body.

Engineering copper nanoparticles synthesized on the surface of carbon nanotubes for anti-microbial and anti-biofilm applications

Biofilms adhere to surfaces to produce extracellular polymeric substances (EPSs). EPSs grow and protect themselves from external stresses. Their formation causes a foul odor and may lead to chronic infectious diseases in animals and people. Biofilms also inhibit the contact between bacteria and antibiotics, thereby reducing their antibacterial activity. Thus, we describe novel nanostructures, a fusion of copper and multi-walled carbon nanotubes (MWCNTs), which increase antimicrobial activity against biofilms without being toxic to human cells. Simulations based on the stochastic response were performed to predict the efficiency of synthesizing nanostructures. The synthesized Cu/MWCNTs inhibit the growth of Methylobacterium spp., which forms biofilms; antimicrobial testing and cytotoxicity assessments showed that the Cu/MWCNTs were not cytotoxic to human cells. The Cu/MWCNTs come in direct contact with the bacterial cell surface, damage the cell wall, and cause secondary oxidation of reactive oxygen species. Furthermore, the Cu/MWCNTs release copper ions, which inhibit the quorum sensing in Methylobacterium spp., thereby inhibiting the expression of the genes that form biofilms. Additionally, we confirmed excellent electrical and thermal conductivity of Cu/MWCNTs as well as biofilm removal efficiency in the microfluidic channel.

Some facts about the respiratory enzymes of Pseudomonas pseudoalcaligenes KF707 recently renamed as Pseudomonas furukawaii sp. nov., type strain KF707

Kimura and co-workers (Kimura N et al. Int J Syst Evol Microbiol 2018;68:1429-1435) recently proposed renaming the obligate aerobe Pseudomonas pseudoalcaligenes KF707 as Pseudomonas furukawiisp. nov. type strain KF707. Since the first quasi-complete genome sequence of KF707 was reported in 2012 (accession number: PRJNA83639) numerous reports on chemotaxis and function/composition of the respiratory redox chain of KF707 have been published, demonstrating that KF707 contains three cheA genes for aerobic motility, four cytochrome oxidases of c(c)aa3- and cbb3-type and one bd-type quinol oxidase. With this background in mind, it has been quite a surprise to read within Table 1 of the paper by Kimura et al. that strain KF707 is phenotypically characterized as cytochrome oxidase-negative. Further, Table 1 also reports that KF707 is β-galactosidase-positive, an affirmation that is not consistent with results documented in the current literature. In this present 'Letter to the Editor' we show that Kimura et al. have contradicted themselves and provided inaccurate information in respect to the respiratory phenotypic features of P. furukawii. Based on this, an official corrigendum is requested since the publication, as it is, blurs the credibility of the International Journal of Systematic and Evolutionary Microbiology.

Primary Metabolism and Medium-Chain Fatty Acid Alterations Precede Long-Chain Fatty Acid Changes Impacting Neutral Lipid Metabolism in Response to an Anticancer Lysophosphatidylcholine Analogue in Yeast

The nonmetabolizable lysophosphatidylcholine (LysoPC) analogue edelfosine is the prototype of a class of compounds being investigated for their potential as selective chemotherapeutic agents. Edelfosine targets membranes, disturbing cellular homeostasis. Is not clear at this point how membrane alterations are communicated between intracellular compartments leading to growth inhibition and eventual cell death. In the present study, a combined metabolomics/lipidomics approach for the unbiased identification of metabolic pathways altered in yeast treated with sublethal concentrations of the LysoPC analogue was employed. Mass spectrometry of polar metabolites, fatty acids, and lipidomic profiling was used to study the effects of edelfosine on yeast metabolism. Amino acid and sugar metabolism, the Krebs cycle, and fatty acid profiles were most disrupted, with polar metabolites and short-medium chain fatty acid changes preceding long and very long-chain fatty acid variations. Initial increases in metabolites such as trehalose, proline, and γ-amino butyric acid with a concomitant decrease in metabolites of the Krebs cycle, citrate and fumarate, are interpreted as a cellular attempt to offset oxidative stress in response to mitochondrial dysfunction induced by the treatment. Notably, alanine, inositol, and myristoleic acid showed a steady increase during the period analyzed (2, 4, and 6 h after treatment). Of importance was the finding that edelfosine induced significant alterations in neutral glycerolipid metabolism resulting in a significant increase in the signaling lipid diacylglycerol.

Evaluating the Metal Tolerance Capacity of Microbial Communities Isolated from Alberta Oil Sands Process Water

Anthropogenic activities have resulted in the intensified use of water resources. For example, open pit bitumen extraction by Canada’s oil sands operations uses an estimated volume of three barrels of water for every barrel of oil produced. The waste tailings–oil sands process water (OSPW)–are stored in holding ponds, and present an environmental concern as they are comprised of residual hydrocarbons and metals. Following the hypothesis that endogenous OSPW microbial communities have an enhanced tolerance to heavy metals, we tested the capacity of planktonic and biofilm populations from OSPW to withstand metal ion challenges, using Cupriavidus metallidurans, a known metal-resistant organism, for comparison. The toxicity of the metals toward biofilm and planktonic bacterial populations was determined by measuring the minimum biofilm inhibitory concentrations (MBICs) and planktonic minimum inhibitory concentrations (MICs) using the MBEC ™ assay. We observed that the OSPW community and C. metallidurans had similar tolerances to 22 different metals. While thiophillic elements (Te, Ag, Cd, Ni) were found to be most toxic, the OSPW consortia demonstrated higher tolerance to metals reported in tailings ponds (Al, Fe, Mo, Pb). Metal toxicity correlated with a number of physicochemical characteristics of the metals. Parameters reflecting metal-ligand affinities showed fewer and weaker correlations for the community compared to C. metallidurans, suggesting that the OSPW consortia may have developed tolerance mechanisms toward metals present in their environment.

Rhodococcus erythropolis cells adapt their fatty acid composition during biofilm formation on metallic and non-metallic surfaces

Several parameters are involved in bacterial adhesion and biofilm formation including surface type, medium composition and cellular surface hydrophobicty. When the cells are placed inside tubes, parameters such as oxygen availability should also influence cell adhesion. To understand which cellular lipids are involved in the molecular events of biofilm formation in Rhodococcus erythropolis, cell adhesion was promoted on different metallic and non-metallic surfaces immersed in culture media. These cells were able to modulate the fatty acid composition of the cell membrane in response to both the surface to which they adhered and the growth medium used. To assess the response of the cells to both surfaces and operational conditions, biofilms were also promoted inside a reactor built with five different types of tubes and with medium recirculation. The biofilm biomass could be directly related not to the hydrophobicity of the tubes used but to the oxygen permeability of the tubes. Besides this, cell age influenced the adhesion of the R. erythropolis cells to the tubes. Principal component analysis showed that the lipid composition of the cells could separate cells attached to metallic from those on non-metallic surfaces in the plane formed by PC1 and PC2, and influence biofilm biomass.

Proteomic and metabolomic profiles demonstrate variation among free-living and symbiotic vibrio fischeri biofilms

Background

A number of bacterial species are capable of growing in various life history modes that enable their survival and persistence in both planktonic free-living stages as well as in biofilm communities. Mechanisms contributing to either planktonic cell or biofilm persistence and survival can be carefully delineated using multiple differential techniques (e.g., genomics and transcriptomics). In this study, we present both proteomic and metabolomic analyses of Vibrio fischeri biofilms, demonstrating the potential for combined differential studies for elucidating life-history switches important for establishing the mutualism through biofilm formation and host colonization.

Methods

The study used a metabolomics/proteomics or “meta-proteomics” approach, referring to the combined protein and metabolic data analysis that bridges the gap between phenotypic changes (planktonic cell to biofilm formation) with genotypic changes (reflected in protein/metabolic profiles). Our methods used protein shotgun construction, followed by liquid chromatography coupled with mass spectrometry (LC-MS) detection and quantification for both free-living and biofilm forming V. fischeri.

Results

We present a time-resolved picture of approximately 100 proteins (2D-PAGE and shotgun proteomics) and 200 metabolites that are present during the transition from planktonic growth to community biofilm formation. Proteins involved in stress response, DNA repair damage, and transport appeared to be highly expressed during the biofilm state. In addition, metabolites detected in biofilms correspond to components of the exopolysaccharide (EPS) matrix (sugars and glycerol-derived). Alterations in metabolic enzymes were paralleled by more pronounced changes in concentration of intermediates from the glycolysis pathway as well as several amino acids.

Conclusions

This combined analysis of both types of information (proteins, metabolites) has provided a more complete picture of the biochemical processes of biofilm formation and what determines the switch between the two life history strategies. The reported findings have broad implications for Vibrio biofilm ecology, and mechanisms for successful survival in the host and environment.

Electronic supplementary material

The online version of this article (doi:10.1186/s12866-015-0560-z) contains supplementary material, which is available to authorized users.

Metabolomics reveals differences of metal toxicity in cultures of Pseudomonas pseudoalcaligenes KF707 grown on different carbon sources

Co-contamination of metals and organic pollutants is a global problem as metals interfere with the metabolism of complex organics by bacteria. Based on a prior observation that metal tolerance was altered by the sole carbon source being used for growth, we sought to understand how metal toxicity specifically affects bacteria using an organic pollutant as their sole carbon source. To this end metabolomics was used to compare cultures of Pseudomonas pseudoalcaligenes KF707 grown on either biphenyl (Bp) or succinate (Sc) as the sole carbon source in the presence of either aluminum (Al) or copper (Cu). Using multivariate statistical analysis it was found that the metals caused perturbations to more cellular processes in the cultures grown on Bp than those grown on Sc. Al induced many changes that were indicative of increased oxidative stress as metabolites involved in DNA damage and protection, the Krebs cycle and anti-oxidant production were altered. Cu also caused metabolic changes that were indicative of similar stress, as well as appearing to disrupt other key enzymes such as fumarase. Additionally, both metals caused the accumulation of Bp degradation intermediates indicating that they interfered with Bp metabolism. Together these results provide a basic understanding of how metal toxicity specifically affects bacteria at a biochemical level during the degradation of an organic pollutant and implicate the catabolism of this carbon source as a major factor that exacerbates metal toxicity.

Toxic metal resistance in biofilms: diversity of microbial responses and their evolution

Since biofilms are an important issue in the fields of medicine and health, several recent microbiological studies have focused on their formation and their contribution to toxic compound resistance mechanisms. In this review, we describe how metals impact biofilm formation and resistance, and how biofilms can help cells resist toxic metals. First, the organic matrix acts as a barrier isolating the cells from many environmental stresses. Secondly, the metabolism of the cells changes, and a slowly-growing or non-growing sub-population of cells known as persisters emerges. Thirdly, in the case of multispecies biofilms, metabolic interactions are developed, allowing cells to be more persistent or to have greater capacity to survive than a single species biofilm. Finally, we discuss how the high density of the cells may promote horizontal gene transfer processes, resulting in the acquisition of new features. All these crucial mechanisms enable microorganisms to survive and colonize toxic environments, and probably accelerate ongoing evolutionary processes.

Selected metal ions protect Bacillus subtilis biofilms from erosion

Many problems caused by bacterial biofilms can be traced back to their high resilience towards chemical perturbations and their extraordinary sturdiness towards mechanical forces. However, the molecular mechanisms that link the mechanical properties of a biofilm with the ability of bacteria to survive in different chemical environments remain enigmatic. Here, we study the erosion stability of Bacillus subtilis (B. subtilis) biofilms in the presence of different chemical environments. We find that these biofilms can utilize the absorption of certain metal ions such as Cu(2+), Zn(2+), Fe(2+), Fe(3+) and Al(3+) into the biofilm matrix to avoid erosion by shear forces. Interestingly, many of these metal ions are toxic for planktonic B. subtilis bacteria. However, their toxic activity is suppressed when the ions are absorbed into the biofilm matrix. Our experiments clearly demonstrate that the biofilm matrix has to fulfill a dual function, i.e. regulating both the mechanical properties of the biofilm and providing a selective barrier towards toxic chemicals.

Efficacy of metal ions and isothiazolones in inhibiting Enterobacter cloacae BF-17 biofilm formation

Enterobacter cloacae is a nosocomial pathogen. The E. cloacae strain BF-17, with a high capacity for biofilm formation, was screened and identified from industrially contaminated samples, carried out in our laboratory. To develop an efficient strategy to deal with biofilms, we investigated the effects of metal ions, including Na⁺, K⁺, Ca⁺, Mg⁺, Cu⁺, and Mn⁺, and 3 isothiazolones, on elimination of E. cloacae BF-17 biofilm formation by using a 0.1% crystal violet staining method. The results revealed that higher concentrations of Na⁺ or K⁺ significantly inhibited E. cloacae BF-17 biofilm development. Meanwhile, Ca²⁺ and Mn²⁺ stimulated biofilm formation at low concentration but exhibited a negative effect at high concentration. Moreover, biofilm formation decreased with increasing concentration of Mg²⁺ and Cu²⁺. The isothiazolones Kathon (14%), 1,2-benzisothiazolin-3-one (11%), and 2-methyl-4-isothiazolin-3-one (10%) stimulated initial biofilm formation but not planktonic growth at low concentrations and displayed inhibitory effects on both biofilm formation and planktonic growth at higher concentrations. Unfortunately, the 3 isothiazolones exerted negligible effects on preformed or fully mature biofilms. Our findings suggest that Na⁺, K⁺, Mg²⁺, and isothiazolones could be used to prevent and eliminate E. cloacae BF-17 biofilms.