Plasmonic nanocomposites: polymer-guided strategies for assembling metal nanoparticles

A stable and flexible Au@Ag NPs/PVA SERS platform for thiram residue detection on rough surface

Flexible and transparent surface-enhanced Raman scattering (SERS) substrates have gained great attention in analysis field as they offer a fast, non-destructive, and highly sensitive platform for in-situ detection. In this work, we present a facile one-pot strategy for synthesizing gold-cored silver shell nanoparticles (Au@Ag NPs) in the polyvinyl alcohol (PVA) colloid. With no other reducing agents, PVA can serve as both reducing and stabilizing agents for forming Au@Ag NPs. Besides, PVA acts as a scaffold to maintain SERS "hot-spots" by preventing nanoparticle aggregation. By using this flexible Au@Ag NPs/PVA colloid, the analytes can be extracted from rough surfaces for SERS measurements with excellent sensitivity, repeatability and stability. The SERS activity of the Au@Ag NPs/PVA remained at 89.8% even after 120 days of storage at room temperature in sealed air atmosphere. The selective detection of thiram residues on the surface of fruits and vegetables was successfully achieved. The limits of detection for thiram residues on apple and tomato surfaces were measured to be 0.58 and 0.56 ng cm-2, respectively, with recovery rate ranging from 91% to 107%. This work demonstrates the immense application potential of SERS colloid platform in the fields of food safety and environmental analysis.

Coiled-coil peptide-based assembly of a plasmonic core-satellite polymer-metal nanocomposite as an efficient photothermal agent for drug delivery applications

Polymer-metal nanocomposites have widespread applications in biomedical fields such as imaging, catalysis, and drug delivery. These particles are characterized by combined organic and inorganic properties. Specifically, photothermal nanocomposites incorporating polymeric and plasmonic nanoparticles (NPs) have been designed for both triggered drug release and as imaging agents. However, the usual design of nanocomposites confers characteristic issues, among which are the decrease of optical properties and resulting low photothermal efficiency, as well as interactions with loaded drugs. Herein, we report the design of a core-satellite polymer-metal nanocomposite assembled by coiled-coil peptides and its superior photothermal efficiency compared to electrostatic-driven nanocomposites which is the standard design. We also found that the orientation of gold nanorods on the surface of polymeric NPs is of importance in the final photothermal efficiency and could be exploited for various applications. Our findings provide an alternative to current wrapping and electrostatic assembly of nanocomposites with the help of coiled-coil peptides and an improvement of the control over core-satellite assemblies with plasmonic NPs. It paves the way to highly versatile assemblies due to the nature of coiled-coil peptides to be easily modified and sensitive to pH or temperature.

In Situ Self-Assembly of Nanoscale Particles into Macroscale Ordered Monolayers with Enhanced Memory Performance

In situ fabrication of macroscale ordered monolayers of nanoparticles (NPs) on targeted substrates is highly desirable for precision electronic and optical devices, while it remains a great challenge. In this study, a solution is provided to address this challenge by developing a colloidal ink formulation and employing the direct-ink-writing (DIW) technique, where on-demand delivery of ink at a targeted location and directional evaporation with controllable rate are leveraged to precisely guide the deposition of polystyrene-grafted gold NPs (Au@PS NPs) into a macroscale monolayer with an ordered Au NP array embedded in a PS thin film. A 2D steady-state diffusion-controlled evaporation model, which explains the parameter dependence of the experimental results and gives semiquantitative agreement with the experimental evaporation kinetics is proposed. The ordered monolayer is used as both nanocrystal floating gates and the tunneling layer for nonvolatile memory devices. It shows significantly enhanced performance compared with a disordered NP film prepared by spin coating. This approach allows for fine control of NP self-assembly to print macroscaleordered monolayers directly onto substrates, which has great promise for application in broad fields, including microelectronic and photoelectronic devices, sensors, and functional coatings.

Stimulus-Responsive Ultrathin Films for Bioapplications: A Concise Review

The term "nanosheets" has been coined recently to describe supported and free-standing "ultrathin film" materials, with thicknesses ranging from a single atomic layer to a few tens of nanometers. Owing to their physicochemical properties and their large surface area with abundant accessible active sites, nanosheets (NSHs) of inorganic materials such as Au, amorphous carbon, graphene, and boron nitride (BN) are considered ideal building blocks or scaffolds for a wide range of applications encompassing electronic and optical devices, membranes, drug delivery systems, and multimodal contrast agents, among others. A wide variety of synthetic methods are employed for the manufacturing of these NSHs, and they can be categorized into (1) top-down approaches involving exfoliation of layered materials, or (2) bottom-up approaches where crystal growth of nanocomposites takes place in a liquid or gas phase. Of note, polymer template liquid exfoliation (PTLE) methods are the most suitable as they lead to the fabrication of high-performance and stable hybrid NSHs and NSH composites with the appropriate quality, solubility, and properties. Moreover, PTLE methods allow for the production of stimulus-responsive NSHs, whose response is commonly driven by a favorable growth in the appropriate polymer chains onto one side of the NSHs, resulting in the ability of the NSHs to roll up to form nanoscrolls (NSCs), i.e., open tubular structures with tunable interlayer gaps between their walls. On the other hand, this review gives insight into the potential of the stimulus-responsive nanostructures for biosensing and controlled drug release systems, illustrating the last advances in the PTLE methods of synthesis of these nanostructures and their applications.

Simultaneous optical and magnetophoretic monitoring of DNA hybridization using superparamagnetic and plasmonic colloids

The detection and separation of small biomolecules from complex mixtures and the possibility of their recovering for further analyses have great benefits for the early diagnosis and prognosis of diseases. Developing simple, sensitive, and cost-effective tools that allow the rapid and accurate assembly and isolation of molecular biomarkers has the potential to improve both patient care and hospital logistic efficiency towards personalized and affordable treatments of diseases.In this work, we presenta method consisting ofUV-vis-spectroscopy assisted-magnetophoresis for the monitoring of DNA hybridization. For this purpose, a magnetic device generating 7.5 T/m uniform magnetic field gradient was designed and incorporated to a commercial spectrophotometer. Different batches of colloidal superparamagnetic particles (SMPs), with different elemental compositions, were functionalized with twenty-mer complementary oligonucleotides, TB1 and TB2. When the functionalized SMPs-TB1 and SMPs-TB2 are mixed and incubated, the hybridization process of TB1 and TB2 occurs resulting in the formation of colloidal aggregates. When brought under the magnetic field, depending on the magnetic strength (Γ) of the formed aggregates, they separate either faster or slower than the non-functionalized SMPs. The difference in magnetic separation time (Δt) is optically monitored by measuring the real time transparency of the suspension at specific wavelengths. The detection of aggregates at concentrations of 0.001% w/v was achieved, showing Δt ranging from 113-228 s. Based on the changes of Δt, the study addresses how electrosteric, magnetic, and hydrogen bonding interactions affect the hybridization process and suggests optimum experimental conditions for accurate monitoring of TB1-TB2 hybridization.

Directed Nanoparticle Assembly through Polymer Crystallization

Nanoparticles can be assembled into complex structures and architectures by using a variety of methods. In this review, we discuss recent progress of using polymer crystallization (particularly polymer single crystals, PSCs) to direct nanoparticle assembly. PSCs have been extensively studied since 1957. Mainly appearing as quasi-two-dimensional (2D) lamellae, PSCs are typically used as model systems to determine polymer crystalline structures, or as markers to investigate the crystallization process. Recent research has demonstrated that they can also be used as nanoscale functional materials. Herein, we show that nanoparticles can be directed to assemble into complex shapes by using in situ or ex situ polymer crystal growth. End-functionalized polymers can crystallize into 2D nanosheet PSCs, which are used to conjugate with complementary nanoparticles, leading to a nanosandwich structure. These nanosandwiches can find interesting applications for catalysis, surface-enhanced Raman spectroscopy, and nanomotors. Dissolution of the nanosandwich leads to the formation of Janus nanoparticles, providing a unique method for asymmetric nanoparticle synthesis.

Linear assembly of lead bromide-based nanoparticles inside lead(ii) polymers prepared by mixing the precursors of both the nanoparticle and the polymer

Preparation of 1D assemblies of lead halide-based nanoparticles inside a lead bromide polymer by concurrent formation of lead(ii) oligomers and the nanoparticles in the presence of cyclohexanemethylammonium bromide.

Self-Assembly of Polymer-Coated Plasmonic Nanocrystals: From Synthetic Approaches to Practical Applications

Self-assembly of plasmonic nanocrystals (PNCs) and polymers provides access to a variety of functionalized metallic-polymer building blocks and higher-order hybrid plasmonic assemblies, and thus is of considerable fundamental and practical interest. The hybrid assemblies often not only inherit individual characteristics of polymers and PNCs but also exhibit distinct photophysical and catalytic properties compared to that of a single PNC building block. The tailorable plasmonic coupling between PNCs within assemblies enables the precise control over localized surface plasmon resonance, which subsequently affords a series of light-driven or photo-activated applications, such as surface-enhanced Raman scattering detection, photoacoustic imaging, photothermal therapy, and photodynamic therapy. In this review, the synthetic strategies of a library of PNC-polymer hybrid building blocks and corresponding assemblies are summarized along with the mechanisms of polymer-assisted self-assembly of PNCs and the concepts for bridging the intrinsic properties of PNC-polymer assemblies to widespread practical applications.

Circular assembly of colloidal nanoparticles at the liquid-air interface mediated by block copolymers

The self-assembly of colloidal nanoparticles (NPs) mediated by block copolymers (BCPs) is an efficient way for fabricating nanocomposite superstructures with precise geometric control. Here we report a generalized liquid-air interfacial strategy by exploiting the versatility in tuning the specific affinities between the grafted polymeric ligands and BCPs, enabling the circular assembly of NPs on a liquid surface to afford unique ring-like superstructures. Fe3O4 NPs act as the model system; however, CoFe2O4 and Au NPs are also demonstrated using the proposed assembly method. Functionalizing NPs with a specific polymeric ligand is the key to achieve the circular assembly of NPs, while both the subphase and the solvent annealing temperature have profound influence on the microphase separation behaviors of BCPs and therefore the morphology of the resulting NP assemblies. Moreover, the co-assembly of two types of NPs grafted with distinct polymeric ligands enables unprecendented heterogeneous concentric rings, with each ring consisting of one type of NP.

Gelation of patchy ligand shell nanoparticles decorated by liquid-crystalline ligands: computer simulation study

We consider the coarse-grained modelling of patchy ligand shell nanoparticles with liquid crystalline ligands. The cases of two, three, four and six symmetrically arranged patches of ligands are discussed, as well as the cases of their equatorial and icosahedral arrangement. A solution of decorated nanoparticles is considered within a slit-like pore with solid walls and the interior filled by a polar solvent. The ligands form physical cross-links between the nanoparticles due to strong liquid crystalline interaction, turning the solution into a gel-like structure. Gelation is carried out repeatedly starting each time from a freshly equilibrated dispersed state of nanoparticles. The gelation dynamics and the range of network characteristics of the gel are examined, depending on the type of patchy decoration and on the solution density. Emphasis is given to the theoretical prediction of the type of decoration and the solution density most suitable for producing a uniformly cross-linked and highly elastic gel structure.

Two-Step Assembly of Thermoresponsive Gold Nanorods Coated with a Single Kind of Ligand

Gold nanorods (GNRs) coated with a single kind of ligand show thermoreponsive two-step assembly to provide a hierarchical structure. The GNRs (33 nm in length × 14 nm in diameter) coated with a hexa(ethylene glycol) (HEG) derivative form side-by-side assemblies at 30 °C (T_A1 ) as a steady state through dehydration. By further heating to over 40 °C (T_A2 ), larger assemblies, which are composed of the side-by-side assembled units, are formed as hierarchical structures. The dehydration temperature of the HEG derivative varies depending on the free volume of the HEG unit, which corresponds to the curvature of the GNRs. Upon heating, dehydration first occurs from the ligands on the side portions with a lower curvature, and then from the ligands on the edge portions with a higher curvature. The different sized GNRs (33 × 8 and 54 × 15 nm) also show two-step assembly. Both the T_A1 and T_A2 are dependent on the diameter of the GNRs, but independent of their length. This result supports that the dehydration is dependent on the free volume, which corresponds to the curvature. Anisotropic assembly focusing on differences in curvature provides new guidelines for the fabrication of hierarchical structures.

Nanoparticle Superlattices: The Roles of Soft Ligands

Nanoparticle superlattices are periodic arrays of nanoscale inorganic building blocks including metal nanoparticles, quantum dots and magnetic nanoparticles. Such assemblies can exhibit exciting new collective properties different from those of individual nanoparticle or corresponding bulk materials. However, fabrication of nanoparticle superlattices is nontrivial because nanoparticles are notoriously difficult to manipulate due to complex nanoscale forces among them. An effective way to manipulate these nanoscale forces is to use soft ligands, which can prevent nanoparticles from disordered aggregation, fine-tune the interparticle potential as well as program lattice structures and interparticle distances - the two key parameters governing superlattice properties. This article aims to review the up-to-date advances of superlattices from the viewpoint of soft ligands. We first describe the theories and design principles of soft-ligand-based approach and then thoroughly cover experimental techniques developed from soft ligands such as molecules, polymer and DNA. Finally, we discuss the remaining challenges and future perspectives in nanoparticle superlattices.

Amphiphilic N-Heterocyclic Carbene-Stabilized Gold Nanoparticles and Their Self-Assembly in Polar Solvents

Soft matter-directed self-assembly of amphiphilic inorganic nanoparticles (NPs) has recently emerged as a promising approach to access NP ensembles with superior collective properties. While thiol-terminated molecules are primarily employed to tether the amphiphilic ligand to the metal, concerns remain regarding the stabilities of the resulting NPs and their corresponding aggregates. As an alternative, we report amphiphilic N-heterocyclic carbene (NHC)-functionalized gold nanoparticles (AuNPs). To accomplish this, an amphiphilic NHC-Au^I complex based on an asymmetric triethylene glycol-/dodecyl-functionalized benzimidazole was first synthesized and used to prepare the corresponding stable amphiphilic NHC-decorated AuNPs. The resulting NPs were comprehensively characterized using both solution- and solid-state-based techniques such as proton nuclear magnetic resonance spectroscopy, dynamic light scattering, transmission electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. By optimizing the self-assembly behavior of these amphiphilic AuNPs in deionized water, ethanol, and their mixtures, we were able to fine-tune the plasmonic properties of the AuNPs in the wide range of 525-640 nm. Furthermore, when treated with thiols, the ensembles showed greater stability compared to their parent discrete AuNP counterparts at room temperature.

Probing the Sulfur-Modified Capping Layer of Gold Nanoparticles Using Surface Enhanced Raman Spectroscopy (SERS) Effects

Gold nanoparticles (AuNP) exhibit particular plasmonic properties when stimulated by visible light, which makes them a promising tool to many applications in sensor technology and biomedical applications, especially when associated to sulfur-based compounds. Sulfur species form a great variety of self-assembled structures that cap AuNP and this interaction rules the optical and plasmonic properties of the system. Here, we report the behavior of citrate-stabilized gold nanospheres in two distinct sulfur colloidal solutions, namely, thiocyanate and sulfide ionic solutions. Citrate-capped gold nanospheres were characterized using ultraviolet-visible (UV-Vis) absorption, transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and atomic force microscopy (AFM). In the presence of sulfur species, we have observed the formation of NP clusters and chain-like structures, giving rise to surface-enhanced effects. Surface-enhanced Raman spectroscopy (SERS) pointed to a modification in citrate vibrational modes, which suggests substitution of citrate by either thiocyanate or sulfide ions with distinct dynamics, as showed by in situ fluorescence. Moreover, we report the emergence of surface-enhanced infrared absorption (SEIRA) effect, which corroborates SERS conclusions. Further, SEIRA shows a great potential as a tool for specification of sulfur compounds in colloidal solutions, which is particularly useful when dealing with sensor technology.

Templated self-assembly of one-dimensional CsPbX3 perovskite nanocrystal superlattices

Ordered self-assembled arrays or superstructures of nanocrystals (NCs) have attracted intense research interest due to their ability to translate valuable nanoscale properties to larger length scales. Numerous techniques have been explored to induce self-assembly into various superstructures. Here we investigated a simple kinetic approach to form self-assembled one-dimensional perovskite CsPbX₃ (X: halides) nanocrystal arrays templated inside a pod shaped inert lead sulfate (PbSO₄) scaffold. Both the solvent effects, and the self-assembly process and mechanism, are systematically studied based on a uniform procedure developed to generate CsPbX₃ nanocrystal superlattices with different sizes and compositions. The formation of one-dimensional (1D) chains of NCs within a half-cylindrical pod of PbSO₄ reflects a balance between solvophobicity and solvophilicity of the components. By reducing the size of NCs, we successfully realized 2D superlattices with two or three rows of close-packed CsPbBr₃ NCs, in addition to single string-of-pearl type 1D assemblies. The superlattices can be assembled both inside and outside of the half-cylindrical shells by regulating the reaction conditions. The self-assembly behavior is reminiscent of the host-guest systems of organic molecular species where supramolecular recognition rules apply to give well-defined complexes. The current study opens a door for controlling self-assembled nanostructures of CsPbX₃ NCs, and provides an attainable platform for future optoelectronic devices.

Polymerization-Like Co-Assembly of Silver Nanoplates and Patchy Spheres

Highly anisometric nanoparticles have distinctive mechanical, electrical, and thermal properties and are therefore appealing candidates for use as self-assembly building blocks. Here, we demonstrate that ultra-anisometric nanoplates, which have a nanoscale thickness but a micrometer-scale edge length, offer many material design capabilities. In particular, we show that these nanoplates "copolymerize" in a predictable way with patchy spheres (Janus and triblock particles) into one- and two-dimensional structures with tunable architectural properties. We find that, on the pathway to these structures, nanoplates assemble into chains following the kinetics of molecular step-growth polymerization. In the same mechanistic framework, patchy spheres control the size distribution and morphology of assembled structures, by behaving as monofunctional chain stoppers or multifunctional branch points during nanoplate polymerization. In addition, both the lattice constant and the stiffness of the nanoplate assemblies can be manipulated after assembly. We see highly anisometric nanoplates as one representative of a broader class of dual length-scale nanoparticles, with the potential to enrich the library of structures and properties available to the nanoparticle self-assembly toolbox.

Nanocomposites of Highly Monodisperse Encapsulated Superparamagnetic Iron Oxide Nanocrystals Homogeneously Dispersed in a Poly(ethylene Oxide) Melt

Nanocomposite materials based on highly stable encapsulated superparamagnetic iron oxide nanocrystals (SPIONs) were synthesized and characterized by scattering methods and transmission electron microscopy (TEM). The combination of advanced synthesis and encapsulation techniques using different diblock copolymers and the thiol-ene click reaction for cross-linking the polymeric shell results in uniform hybrid SPIONs homogeneously dispersed in a poly(ethylene oxide) matrix. Small-angle X-ray scattering and TEM investigations demonstrate the presence of mostly single particles and a negligible amount of dyads. Consequently, an efficient control over the encapsulation and synthetic conditions is of paramount importance to minimize the fraction of agglomerates and to obtain uniform hybrid nanomaterials.

Directed assembly of functionalized nanoparticles with amphiphilic diblock copolymers

We theoretically propose a simple approach to achieve soft nanoparticles with a self-patchiness nature, which are further directed to assemble into a rich variety of highly ordered superstructures.

Activatable ultrasmall gold nanorods for “off–on” fluorescence imaging-guided photothermal therapy

We developed activatable ultrasmall gold nanorods (AUGNRs) to realize “off–on” switched fluorescence imaging-guided efficient PTT.

Highly active 3-dimensional cobalt oxide nanostructures on the flexible carbon substrates for enzymeless glucose sensing

3-Dimensional cobalt oxide nanostructures on the flexible carbon substrates for enzymeless glucose sensing.

Interfacial Transformation of an Amorphous Carbon Nanofilm upon Fe@Ag@Si Nanoparticle Landing and its Colloidal Nanoscrolls: Enhanced Nanocompositing-Based Performance for Bioapplications

We report a novel method for generating magneto-plasmonic carbon nanofilms and nanoscrolls using a combination of two gas-phase synthetic techniques. Ternary Fe@Ag@Si "onion-like" nanoparticles (NPs) are produced by a magnetron sputtering inert gas condensation source and are in situ landed onto the surface of carbon nanofilms, which were previously deposited by a DC arc discharge technique. Subsequently, a polyethylenimine-mediated chemical exfoliation process is performed to obtain carbon nanoscrolls (CNS) with embedded NPs (CNS-NPs). Of note, the carbon nanofilms undergo an interfacial transition upon addition of NPs and become rich in the sp² phase. This transformation endows and enhances multiple functions, such as thermal conductivity and the plasmonic properties of the nanocomposites. The obtained two-dimentional (2D) nanocomposites not only exhibit a highly efficient surface-enhanced Raman scattering property, allowing sensitive detection of malachite green isothiocyanate (MGIT) and adenosine-triphosphate (ATP) molecules at concentrations as low as 1 × 10^-10 M, but also show enhanced near-infrared-responsive photothermal activity when forming stable colloidal 1D CNS-NPs. In addition, the CNS-NPs present an enhanced single- and two-photon fluorescence in comparison with pristine CNS and NPs. These results make them suitable for the rational fabrication of "all-in-one" multifunctional nanocomposites with tubular structures toward a wide range of biomedical solutions.

Amphiphilic-Polymer-Guided Plasmonic Assemblies and Their Biomedical Applications

Plasmonic nanostructures with unique physical and biological properties have attracted increased attention for potential biomedical applications. Polymers grafted on metal nanoparticle surface can be used as assembly regulating molecules to guide nanoparticles organize into ordered or hierarchical structures in solution, within condensed phases, or at interfaces. In this Topical Review, we will highlight recent efforts on self-assembly of gold nanoparticles coated with polymer brushes. How and what kind of polymer graft can be used to adjust nanoparticle interactions, to dictate interparticle orientation, and to determine assembled nanostructures will be discussed. Furthermore, the Topical Review will shed light on the physicochemical properties, including self-assembly behavior and kinetics, tunable localized surface plasmon resonance effect, enhanced surface enhanced Raman scattering, and other optical and thermal properties. The potential of self-assembled nanostructures for applications in different fields, especially in biomedicine, will also be elaborated.

Self-Assembly of Colloidal Nanocrystals: From Intricate Structures to Functional Materials

Chemical methods developed over the past two decades enable preparation of colloidal nanocrystals with uniform size and shape. These Brownian objects readily order into superlattices. Recently, the range of accessible inorganic cores and tunable surface chemistries dramatically increased, expanding the set of nanocrystal arrangements experimentally attainable. In this review, we discuss efforts to create next-generation materials via bottom-up organization of nanocrystals with preprogrammed functionality and self-assembly instructions. This process is often driven by both interparticle interactions and the influence of the assembly environment. The introduction provides the reader with a practical overview of nanocrystal synthesis, self-assembly, and superlattice characterization. We then summarize the theory of nanocrystal interactions and examine fundamental principles governing nanocrystal self-assembly from hard and soft particle perspectives borrowed from the comparatively established fields of micrometer colloids and block copolymer assembly. We outline the extensive catalog of superlattices prepared to date using hydrocarbon-capped nanocrystals with spherical, polyhedral, rod, plate, and branched inorganic core shapes, as well as those obtained by mixing combinations thereof. We also provide an overview of structural defects in nanocrystal superlattices. We then explore the unique possibilities offered by leveraging nontraditional surface chemistries and assembly environments to control superlattice structure and produce nonbulk assemblies. We end with a discussion of the unique optical, magnetic, electronic, and catalytic properties of ordered nanocrystal superlattices, and the coming advances required to make use of this new class of solids.

Photoelectron transport tuning of self-assembled subbands

Conventionally, electrical transport of quantum subbands occurs at very high electric fields, indicating that the medium is easy to break down. In the experiments and practical applications, the extreme condition is difficult to satisfy. For quantum information transmission, low power consumption and convenient implementation are what we expect. In this paper, we engineered a special quantum dot array (QDA) embedded in a single crystal matrix. By external optical field excitation, we found a series of subbands made of the self-assembled QDA discretely located in the matrix. Changing the spacing between the quantum dots leads to the variation of subband spacing. Artificially manipulating the microcosmic QDA system can bring interesting macroscopic effects, such as an enhanced absorption intensity in the ultraviolet range, a blue-shift of the surface plasmon resonance peak and nonlinear absorption changed from two-photon absorption to saturated absorption. The intrinsic mechanism of the subband optical response was revealed due to the strong quantum confinement effect and dominant intraband transitions. The weak surface plasmon resonance absorption of Ni QDA gave an excellent figure of merit of the order of 10(-10). The composite films are expectation enough to become a prime candidate for nonlinear applications near 532 nm. Therefore with interplay of the weak optical field and subbands, we achieved a tunable photoelectron transport process.

Modular, polymer-directed nanoparticle assembly for fabricating metamaterials

We achieve the fabrication of plasmonic meta-atoms by utilizing a novel, modular approach to nanoparticle self-assembly that utilizes polymer templating to control meta-atom size and geometry. Ag nanocubes are deposited and embedded into a polymer thin-film, where the polymer embedding depth is used to dictate which nanocube faces are available for further nanocrystal binding. Horizontal and vertical nanocube dimers were successfully fabricated with remarkably high yield using a bifunctional molecular linker to bind a second nanocube. Surface plasmon coupling can be readily tuned by varying the size, shape, and orientation of the second nanoparticle. We show that meta-atoms can be fabricated to exhibit angle- and polarization-dependent optical properties. This scalable technique for meta-atom assembly can be used to fabricate large-area metasurfaces for polarization- and phase-sensitive applications, such as optical sensing.

Main chain poly(bile acid) directed plasmonic nanospheres with amphiphilic binding pockets and photo-triggered destruction

A series of sulfide-bridged main chain poly(bile acid)s were developed and biologically sourced amphiphilic homopolymer-directed plasmonic nanospheres and their properties were investigated.

Nanostar Clustering Improves the Sensitivity of Plasmonic Assays

Star-shaped Au nanoparticles (Au nanostars, AuNS) have been developed to improve the plasmonic sensitivity, but their application has largely been limited to single-particle probes. We herein describe a AuNS clustering assay based on nanoscale self-assembly of multiple AuNS and which further increases detection sensitivity. We show that each cluster contains multiple nanogaps to concentrate electric fields, thereby amplifying the signal via plasmon coupling. Numerical simulation indicated that AuNS clusters assume up to 460-fold higher field density than Au nanosphere clusters of similar mass. The results were validated in model assays of protein biomarker detection. The AuNS clustering assay showed higher sensitivity than Au nanosphere. Minimizing the size of affinity ligand was found important to tightly confine electric fields and improve the sensitivity. The resulting assay is simple and fast and can be readily applied to point-of-care molecular detection schemes.

Colloidal metasurfaces displaying near-ideal and tunable light absorbance in the infrared

Metasurfaces are ultrathin, two-dimensional arrays of subwavelength resonators that have been demonstrated to control the flow of light in ways that are otherwise unattainable with natural materials. These arrays are typically composed of metallic Ag or Au nanostructures shaped like split rings, nanowire pairs or nanorods (commonly referred to as meta-atoms) that are arranged to produce a collective optical response spanning an impressive range of properties, from the perfect absorption of incident light to superresolution imaging. However, metasurfaces pose major challenges in their fabrication over large areas, which can be prohibitively expensive and time consuming using conventional nanolithography techniques. Here we show that differently shaped colloidal nanocrystals can be organized into metasurface architectures using robust, scalable assembly methods. These metasurfaces exhibit extreme in-plane electromagnetic coupling that is strongly dependent on nanocrystal size, shape and spacing. Colloidal metasurfaces that display near-ideal electromagnetic absorbance can be tuned from the visible into the mid-infrared wavelengths.

Metasurfaces are arrays of subwavelength structures that are tailored to produce specific optical responses. Rozin et al. show that large-area metasurfaces can be readily fabricated by self-assembly of colloidal nanocrystals of different geometries, producing tunable reflectance and absorbance properties.

Automated quantitative image analysis of nanoparticle assembly

The ability to characterize higher-order structures formed by nanoparticle (NP) assembly is critical for predicting and engineering the properties of advanced nanocomposite materials. Here we develop a quantitative image analysis software to characterize key structural properties of NP clusters from experimental images of nanocomposites. This analysis can be carried out on images captured at intermittent times during assembly to monitor the time evolution of NP clusters in a highly automated manner. The software outputs averages and distributions in the size, radius of gyration, fractal dimension, backbone length, end-to-end distance, anisotropic ratio, and aspect ratio of NP clusters as a function of time along with bootstrapped error bounds for all calculated properties. The polydispersity in the NP building blocks and biases in the sampling of NP clusters are accounted for through the use of probabilistic weights. This software, named Particle Image Characterization Tool (PICT), has been made publicly available and could be an invaluable resource for researchers studying NP assembly. To demonstrate its practical utility, we used PICT to analyze scanning electron microscopy images taken during the assembly of surface-functionalized metal NPs of differing shapes and sizes within a polymer matrix. PICT is used to characterize and analyze the morphology of NP clusters, providing quantitative information that can be used to elucidate the physical mechanisms governing NP assembly.

Multilayered core-satellite nanoassemblies with fine-tunable broadband plasmon resonances

We report on a robust nanotemplating approach to synthesize plasmonic multilayered core-satellite (MCS) nanoassemblies. Templated with gold nanorods, ultrathin Au/Ag alloy cages and satellite gold nanoparticles can be constructed sequentially by galvanic replacement reactions and electrostatic self-assembly, respectively, forming structurally well-defined MCS. The MCS nanoassemblies exhibit strong broadband plasmon resonances from ∼440 to ∼1100 nm, and their resonant features can be fine-tuned by adjusting the size and number density of satellite nanoparticles and by adjusting the thickness of the silica spacer between cage and satellite particles. Such fine-engineered MCS nanoassemblies enable precise programming of the strength and distribution of "hot spots" to maximize the overall enhancement of surface enhanced Raman scattering.

Gold nanoparticles for photoacoustic imaging

Photoacoustic (PA) imaging is a biomedical imaging modality that provides functional information regarding the cellular and molecular signatures of tissue by using endogenous and exogenous contrast agents. There has been tremendous effort devoted to the development of PA imaging agents, and gold nanoparticles as exogenous contrast agents have great potential for PA imaging due to their inherent and geometrically induced optical properties. The gold-based nanoparticles that are most commonly employed for PA imaging include spheres, rods, shells, prisms, cages, stars and vesicles. This article provides an overview of the current state of research in utilizing these gold nanomaterials for PA imaging of cancer, atherosclerotic plaques, brain function and image-guided therapy.

π–π interactions mediated self-assembly of gold nanoparticles into single crystalline superlattices in solution

Self-assembly of colloidal gold nanoparticles employing π–π interactions in solution is studied. It is shown that capping ligand exchange with aromatic thiols results in formation of 3D single crystalline superlattices with long-range ordering.

Silver-gelatine bionanocomposites for qualitative detection of a pesticide by SERS

Gelatine based nanocomposites incorporating Ag nanoparticles as a new SERS platform for the detection of diethyldithiocarbamate (EtDTC), aiming controlled release applications.

Tunable polymer brush/Au NPs hybrid plasmonic arrays based on host-guest interaction

The fabrication of versatile gold nanoparticle (Au NP) arrays with tunable optical properties by a novel host-guest interaction are presented. The gold nanoparticles were incorporated into polymer brushes by host-guest interaction between β-cyclodextrin (β-CD) ligand of gold nanoparticles and dimethylamino group of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). The gold nanoparticle arrays were prepared through the template of PDMAEMA brush patterns which were fabricated combining colloidal lithography and surface-initiated atom-transfer radical polymerization (SI-ATRP). The structure parameters of gold nanoparticle patterns mediated by polymer brushes such as height, diameters, periods and distances, could be easily tuned by tailoring the etching time or size of colloidal spheres in the process of colloidal lithography. The change of optical properties induced by different gold nanoparticle structures was demonstrated. The direct utilization of PDMAEMA brushes as guest avoids a series of complicated modification process and the PDMAEMA brushes can be grafted on various substrates, which broaden its applications. The prepared gold naoparticle arrays are promising in applications of nanosensors, memory storage and surface enhanced spectroscopy.

Plasmonic nanostructures for light trapping in organic photovoltaic devices

Over the past decade, we have witnessed rapid advances in the development of organic photovoltaic devices (OPVs). At present, the highest level of efficiency has surpassed 10%, suggesting that OPVs have great potential to become competitive with other thin-film solar technologies. Because plasmonic nanostructures are likely to further improve the efficiency of OPVs, this Article reviews recent progress in the development of metal nanostructures for triggering plasmonic effects in OPVs. First, we briefly describe the physical fundamentals of surface plasmons (SPs). Then, we discuss recent approaches toward increasing the light trapping efficiency of OPVs through the incorporation of plasmonic structures. Finally, we provide a brief outlook into the future use of SPs in highly efficient OPVs.