The influence of shell thickness of Au@TiO2 core-shell nanoparticles on the plasmonic enhancement effect in dye-sensitized solar cells

Metallic nanoparticles and hybrids of metallic nanoparticles/graphene nanomaterials for enhanced photon harvesting and charge transport in polymer and dye sensitized solar cells

Solar energy is a sustainable option in the provision of affordable and clean energy. Conversion of solar energy to electricity requires the development of materials and technologies that are not only efficient but also cost-effective. Polymer solar cells (PSCs) and dye sensitized solar cells (DSSCs) are some of the cost-effective technologies for solar energy conversion. However, PSCs suffer from poor optical absorption and charge carrier mobility, while the major drawback to high efficiencies in DSSCs is charge carrier recombination. This article examines the potency of plasmonic metallic nanoparticles (MNPs) and hybrids of MNPs/graphene nanomaterials (GNMs) in mitigating these challenges. MNPs and MNPs/GNMs incorporated in these devices enhance light harvesting to extended wavelengths and improve charge transport. MNPs in the photoanode of DSSCs serve as cosensitizers to offer complementary optical absorption, while MNPs/GNMs as counter electrode yield high catalytic activity comparable to Pt. Simultaneous application of MNPs and/or MNPs/GNMs in PSCs' interfacial and active layers yield enhanced broadband optical absorption and effective charge transport. The mechanisms by which these nanomaterials enhance light harvesting in these devices are discussed in detail. The material characteristics that influence the performance of MNPs and MNPs/GNMs modified devices, such as MNPs size, shape, and morphology, are highlighted. Hence, this article presents perspectives and strategies on successful utilization of plasmonic MNPs and hybrids of MNPs/GNMs to mitigate the challenges of poor optical absorption and charge transport of PSCs and DSSCs for high efficiencies.

Synthesis of TiO2-SiO2-Ag/Fiberglass with Antibacterial Properties and Its Application for Air Cleaning

The TiO₂-SiO₂-Ag/fiberglass with antibacterial properties under UV light irradiation was synthesized. The effects of compositions of TiO₂-SiO₂-Ag/fiberglass, optical, and textural characteristics on the antibacterial activity were studied. The TiO₂-SiO₂-Ag film was coated on the surface of fiberglass carrier filaments. The temperature effect on the formation of the TiO₂-SiO₂-Ag film was established by thermal analysis, and the temperature treatment mode was selected as 300 °C for 30 min, 400 °C for 30 min, 500 °C for 30 min, and 600 °C for 30 min. The influence of silicon oxide and silver additives on the antibacterial properties of TiO₂-SiO₂-Ag films was established. Increasing the treatment temperature of the materials up to 600 °C increased the thermal stability of the titanium dioxide anatase phase, while the values of optical characteristics decreased: the film thickness decreased to 23.92 ± 1.24 nm, the refractive index decreased to 2.154 ± 0.002, the energy of the band gap width decreased to 2.8 ± 0.5, and the light absorption shifted to the visible-light regime, which is important for photocatalytic reactions. The results showed that the use of TiO₂-SiO₂-Ag/fiberglass allows significant decrease in the value of CFU microbial cells to 125 CFU m^-3.

Plasmonic Local Electric Field-Enhanced Interface toward High-Efficiency Cu2ZnSn(S,Se)4 Thin-Film Solar Cells

The kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cells have shown a continuous rise in power conversion efficiencies in the past years. However, the encountered interfacial problems with respect to charge recombination and extraction losses at the CdS/CZTSSe heterojunction still hinder their further development. In this work, an additional plasmonic local electric field is imposed into the CdS/CZTSSe interface through the electrostatic assembly of a two-dimensional (2D) ordered Au@SiO2 NP array onto an aminosilane-modified surface absorber. The interfacial electric properties are tuned by controlling the coverage particle distance, and the finite-difference time domain (FDTD) simulation demonstrates that the strong near-field enhancement mainly occurs near the p-n junction interface. It is shown that the imposed local electric field leads to interfacial electrostatic potential (Velec) augmentation and improves the charge extraction and recombination processes. These electric benefits enable remarkable improvements in open-circuit voltage (Voc) and short-circuit current (Jsc), leading to the cell efficiency being increased from 10.19 to 11.50%. This work highlights the dramatic role of the plasmonic local electric field and the use of the 2D Au@SiO2 NP array to modify a surface absorber instead of the extensively used ion passivation, providing a new strategy for p-n junction engineering in kesterite photovoltaics.

Microstructure and Optical Properties of Nanostructural Thin Films Fabricated through Oxidation of Au-Sn Intermetallic Compounds

AuSn and AuSn₂ thin films (5 nm) were used as precursors during the formation of semiconducting metal oxide nanostructures on a silicon substrate. The nanoparticles were produced in the processes of annealing and oxidation of gold–tin intermetallic compounds under ultra-high vacuum conditions. The formation process and morphology of a mixture of SnO₂ and Au@SnO_x (the core–shell structure) nanoparticles or Au nanocrystalites were carefully examined by means of spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) combined with energy-dispersive X-ray spectroscopy (EDX). The annealing and oxidation of the thin film of the AuSn intermetallic compound led to the formation of uniformly distributed structures with a size of ∼20–30 nm. All of the synthesized nanoparticles exhibited a strong absorption band at 520–530 nm, which is typical for pure metallic or metal oxide systems.

Gas Sensors Based on Localized Surface Plasmon Resonances: Synthesis of Oxide Films with Embedded Metal Nanoparticles, Theory and Simulation, and Sensitivity Enhancement Strategies

This work presents a comprehensive review on gas sensors based on localized surface plasmon resonance (LSPR) phenomenon, including the theory of LSPR, the synthesis of nanoparticle-embedded oxide thin films, and strategies to enhance the sensitivity of these optical sensors, supported by simulations of the electromagnetic properties. The LSPR phenomenon is known to be responsible for the unique colour effects observed in the ancient Roman Lycurgus Cup and at the windows of the medieval cathedrals. In both cases, the optical effects result from the interaction of the visible light (scattering and absorption) with the conduction band electrons of noble metal nanoparticles (gold, silver, and gold–silver alloys). These nanoparticles are dispersed in a dielectric matrix with a relatively high refractive index in order to push the resonance to the visible spectral range. At the same time, they have to be located at the surface to make LSPR sensitive to changes in the local dielectric environment, the property that is very attractive for sensing applications. Hence, an overview of gas sensors is presented, including electronic-nose systems, followed by a description of the surface plasmons that arise in noble metal thin films and nanoparticles. Afterwards, metal oxides are explored as robust and sensitive materials to host nanoparticles, followed by preparation methods of nanocomposite plasmonic thin films with sustainable techniques. Finally, several optical properties simulation methods are described, and the optical LSPR sensitivity of gold nanoparticles with different shapes, sensing volumes, and surroundings is calculated using the discrete dipole approximation method.

High-Throughput 3D Ensemble Characterization of Individual Core-Shell Nanoparticles with X-ray Free Electron Laser Single-Particle Imaging

The structures as building blocks for designing functional nanomaterials have fueled the development of versatile nanoprobes to understand local structures of noncrystalline specimens. Progress in analyzing structures of individual specimens with atomic scale accuracy has been notable recently. In most cases, however, only a limited number of specimens are inspected lacking statistics to represent the systems with structural inhomogeneity. Here, by employing single-particle imaging with X-ray free electron lasers and algorithms for multiple-model 3D imaging, we succeeded in investigating several thousand specimens in a couple of hours and identified intrinsic heterogeneities with 3D structures. Quantitative analysis has unveiled 3D morphology, facet indices, and elastic strain. The 3D elastic energy distribution is further corroborated by molecular dynamics simulations to gain mechanical insight at the atomic level. This work establishes a route to high-throughput characterization of individual specimens in large ensembles, hence overcoming statistical deficiency while providing quantitative information at the nanoscale.

ZnO Nanowires on Single-Crystalline Aluminum Film Coupled with an Insulating WO3 Interlayer Manifesting Low Threshold SPP Laser Operation

ZnO nanowire-based surface plasmon polariton (SPP) nanolasers with metal-insulator-semiconductor hierarchical nanostructures have emerged as potential candidates for integrated photonic applications. In the present study, we demonstrated an SPP nanolaser consisting of ZnO nanowires coupled with a single-crystalline aluminum (Al) film and a WO3 dielectric interlayer. High-quality ZnO nanowires were prepared using a vapor phase transport and condensation deposition process via catalyzed growth. Subsequently, prepared ZnO nanowires were transferred onto a single-crystalline Al film grown by molecular beam epitaxy (MBE). Meanwhile, a WO3 dielectric interlayer was deposited between the ZnO nanowires and Al film, via e-beam technique, to prevent the optical loss from dominating the metallic region. The metal-oxide-semiconductor (MOS) structured SPP laser, with an optimal WO3 insulating layer thickness of 3.6 nm, demonstrated an ultra-low threshold laser operation (lasing threshold of 0.79 MW cm-2). This threshold value was nearly eight times lower than that previously reported in similar ZnO/Al2O3/Al plasmonic lasers, which were ≈2.4 and ≈3 times suppressed compared to the SPP laser, with WO3 insulating layer thicknesses of 5 nm and 8 nm, respectively. Such suppression of the lasing threshold is attributed to the WO3 insulating layer, which mediated the strong confinement of the optical field in the subwavelength regime.

Synthesis of Au@TiO2 core-shell nanoparticles with tunable structures for plasmon-enhanced photocatalysis

Plasmonic metal-semiconductor nanocomposites, especially those with core-shell nanostructures, have received extensive attention as they can efficiently expand light absorption and accelerate electron-hole separation thus improving the photocatalytic efficiency. However, controlled synthesis and structure manipulation of plasmonic metal-semiconductor nanocomposites still remain a significant challenge. Herein, a simple and universal method has been developed for the preparation of plasmonic Au@TiO₂ core-shell nanoparticles. Using such a method, uniform TiO₂ shells are successfully coated on Au nanoparticles with various morphologies including nanorods, nanocubes, and nanospheres, and the thickness and crystallinity of the TiO₂ shell can be simply tuned by adjusting the pH value and thermal treatment, respectively. Furthermore, the influence of the morphology of the Au core and the thickness and crystallinity of the TiO₂ shell on the photocatalytic performance of Au@TiO₂ towards the photodegradation of methylene blue is systematically explored. It is found that Au@TiO₂ NPs with nanorod morphology and crystalline TiO₂ shells display the best performance, which is 5 times higher than that of bare Au nanoparticles. This work provides a facile strategy for the fabrication of plasmonic core-shell nanostructures that show excellent performance in plasmon-enhanced photocatalysis.

Core-shell nanomaterials: Applications in energy storage and conversion

Materials with core-shell structures have attracted increasing attention in recent years due to their unique properties and wide applications in energy storage and conversion systems. Through reasonable adjustments of their shells and cores, various types of core-shell structured materials can be fabricated with favorable properties that play significant roles in energy storage and conversion processes. The core-shell material can provide an effective solution to the current energy crisis. Various synthetic strategies used to fabricate core-shell materials, including the atomic layer deposition, chemical vapor deposition and solvothermal method, are briefly mentioned here. A state-of-the -art review of their applications in energy storage and conversion is summarized. The involved energy storage includes supercapacitors, li-ions batteries and hydrogen storage, and the corresponding energy conversion technologies contain quantum dot solar cells, dye-sensitized solar cells, silicon/organic solar cells and fuel cells. In addition, the correlation between the core-shell structures and their performance in energy storage and conversion is introduced, and this finding can provide guidance in designing original core-shell structures with advanced properties.

Electron Tomography of Plasmonic Au Nanoparticles Dispersed in a TiO2 Dielectric Matrix

Plasmonic Au nanoparticles (AuNPs) embedded into a TiO₂ dielectric matrix were analyzed by combining two-dimensional and three-dimensional electron microscopy techniques. The preparation method was reactive magnetron sputtering, followed by thermal annealing treatments at 400 and 600 °C. The goal was to assess the nanostructural characteristics and correlate them with the optical properties of the AuNPs, particularly the localized surface plasmon resonance (LSPR) behavior. High-angle annular dark field-scanning transmission electron microscopy results showed the presence of small-sized AuNPs (quantum size regime) in the as-deposited Au-TiO₂ film, resulting in a negligible LSPR response. The in-vacuum thermal annealing at 400 °C induced the formation of intermediate-sized nanoparticles (NPs), in the range of 10-40 nm, which led to the appearance of a well-defined LSPR band, positioned at 636 nm. Electron tomography revealed that most of the NPs are small-sized and are embedded into the TiO₂ matrix, whereas the larger NPs are located at the surface. Annealing at 600 °C promotes a bimodal size distribution with intermediate-sized NPs embedded in the matrix and big-sized NPs, up to 100 nm, appearing at the surface. The latter are responsible for a broadening and a redshift, to 645 nm, in the LSPR band because of increase of scattering-to-absorption ratio. Beyond differentiating and quantifying the surface and embedded NPs, electron tomography also provided the identification of "hot-spots". The presence of NPs at the surface, individual or in dimers, permits adsorption sites for LSPR sensing and for surface-enhanced spectroscopies, such as surface-enhanced Raman scattering.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

Thermally Stable TiO2 - and SiO2 -Shell-Isolated Au Nanoparticles for In Situ Plasmon-Enhanced Raman Spectroscopy of Hydrogenation Catalysts

Raman spectroscopy is known as a powerful technique for solid catalyst characterization as it provides vibrational fingerprints of (metal) oxides, reactants, and products. It can even become a strong surface-sensitive technique by implementing shell-isolated surface-enhanced Raman spectroscopy (SHINERS). Au@TiO2 and Au@SiO2 shell-isolated nanoparticles (SHINs) of various sizes were therefore prepared for the purpose of studying heterogeneous catalysis and the effect of metal oxide coating. Both SiO2 - and TiO2 -SHINs are effective SHINERS substrates and thermally stable up to 400 °C. Nano-sized Ru and Rh hydrogenation catalysts were assembled over the SHINs by wet impregnation of aqueous RuCl3 and RhCl3 . The substrates were implemented to study CO adsorption and hydrogenation under in situ conditions at various temperatures to illustrate the differences between catalysts and shell materials with SHINERS. This work demonstrates the potential of SHINS for in situ characterization studies in a wide range of catalytic reactions.

Synthesis and characterization of noble metal-titania core-shell nanostructures with tunable shell thickness

Core-shell nanostructures have found applications in many fields, including surface enhanced spectroscopy, catalysis and solar cells. Titania-coated noble metal nanoparticles, which combine the surface plasmon resonance properties of the core and the photoactivity of the shell, have great potential for these applications. However, the controllable synthesis of such nanostructures remains a challenge due to the high reactivity of titania precursors. Hence, a simple titania coating method that would allow better control over the shell formation is desired. A sol-gel based titania coating method, which allows control over the shell thickness, was developed and applied to the synthesis of Ag@TiO₂ and Au@TiO₂ with various shell thicknesses. The morphology of the synthesized structures was investigated using scanning electron microscopy (SEM). Their sizes and shell thicknesses were determined using tunable resistive pulse sensing (TRPS) technique. The optical properties of the synthesized structures were characterized using UV-vis spectroscopy. Ag@TiO₂ and Au@TiO₂ structures with shell thickness in the range of ≈40-70 nm and 90 nm, for the Ag and Au nanostructures respectively, were prepared using a method we developed and adapted, consisting of a change in the titania precursor concentration. The synthesized nanostructures exhibited significant absorption in the UV-vis range. The TRPS technique was shown to be a very useful tool for the characterization of metal-metal oxide core-shell nanostructures.

Resonant silicon nanoparticles for enhancement of light absorption and photoluminescence from hybrid perovskite films and metasurfaces

Recently, hybrid halide perovskites have emerged as one of the most promising types of materials for thin-film photovoltaic and light-emitting devices because of their low-cost and potential for high efficiency. Further boosting their performance without detrimentally increasing the complexity of the architecture is critically important for commercialization. Despite a number of plasmonic nanoparticle based designs having been proposed for solar cell improvement, inherent optical losses of the nanoparticles reduce photoluminescence from perovskites. Here we use low-loss high-refractive-index dielectric (silicon) nanoparticles for improving the optical properties of organo-metallic perovskite (MAPbI₃) films and metasurfaces to achieve strong enhancement of photoluminescence as well as useful light absorption. As a result, we observed experimentally a 50% enhancement of photoluminescence intensity from a perovskite layer with silicon nanoparticles and 200% enhancement for a nanoimprinted metasurface with silicon nanoparticles on top. Strong increase in light absorption is also demonstrated and described by theoretical calculations. Since both silicon nanoparticle fabrication/deposition and metasurface nanoimprinting techniques are low-cost, we believe that the developed all-dielectric approach paves the way to novel scalable and highly effective designs of perovskite based metadevices.

Synergizing the multiple plasmon resonance coupling and quantum effects to obtain enhanced SERS and PEC performance simultaneously on a noble metal-semiconductor substrate

Aiming to achieve the synergistic enhancement of the surface-enhanced Raman scattering (SERS) and photoelectrocatalytic (PEC) performance on a noble metal-semiconductor, such as Au nanoparticles (NPs)-TiO₂ nanotube arrays (TiO₂ NTAs@hybrid Au NPs), theoretical calculation and experiments are performed. Theoretical calculation indicates that both the SERS and PEC performance can be enhanced by coupling different sized Au NPs on TiO₂ NTAs based on synergizing the multiple plasmon resonance coupling and quantum effects. To further verify this mechanism, TiO₂ NTAs@hybrid Au NPs are assembled via synthesis of TiO₂ NTAs through the anodic oxidation process, followed by the deposition of different sized Au NPs onto the TiO₂ surface simultaneously using physical vapor deposition (PVD) in this work. Such substrates exhibit excellent detection sensitivity towards organic dyes including Rhodamine B (RhB), the organic herbicide dichlorophenoxyacetic acid (2,4-D) and the organophosphate pesticide methyl-parathion (MP) with high reproducibility, stability and reusability. Meanwhile the PEC performance based on this substrate remains efficient compared with the reported results in the literature. The efficient PEC performance mainly originates from both the quantum effect of Au nanoparticles and the formation of a metal-semiconductor heterojunction. It is proposed that other noble metal-semiconductor complex nanomaterials can also obtain both enhanced SERS and PEC performance based on the above mechanism.

Controllable growth of Au@TiO2 yolk–shell nanoparticles and their geometry parameter effects on photocatalytic activity

The one-pot hydrothermal approach has been used to achieve Au@TiO₂ yolk–shell NPs with different geometry parameters: smaller cavities, thinner TiO₂ shells and medium Au cores facilitate more efficient photocatalysis.

Plasmon-Mediated Solar Energy Conversion via Photocatalysis in Noble Metal/Semiconductor Composites

Plasmonics has remained a prominent and growing field over the past several decades. The coupling of various chemical and photo phenomenon has sparked considerable interest in plasmon-mediated photocatalysis. Given plasmonic photocatalysis has only been developed for a relatively short period, considerable progress has been made in improving the absorption across the full solar spectrum and the efficiency of photo-generated charge carrier separation. With recent advances in fundamental (i.e., mechanisms) and experimental studies (i.e., the influence of size, geometry, surrounding dielectric field, etc.) on plasmon-mediated photocatalysis, the rational design and synthesis of metal/semiconductor hybrid nanostructure photocatalysts has been realized. This review seeks to highlight the recent impressive developments in plasmon-mediated photocatalytic mechanisms (i.e., Schottky junction, direct electron transfer, enhanced local electric field, plasmon resonant energy transfer, and scattering and heating effects), summarize a set of factors (i.e., size, geometry, dielectric environment, loading amount and composition of plasmonic metal, and nanostructure and properties of semiconductors) that largely affect plasmonic photocatalysis, and finally conclude with a perspective on future directions within this rich field of research.

Complete Au@ZnO core-shell nanoparticles with enhanced plasmonic absorption enabling significantly improved photocatalysis

Nanostructured ZnO exhibits high chemical stability and unique optical properties, representing a promising candidate among photocatalysts in the field of environmental remediation and solar energy conversion. However, ZnO only absorbs the UV light, which accounts for less than 5% of total solar irradiation, significantly limiting its applications. In this article, we report a facile and efficient approach to overcome the poor wettability between ZnO and Au by carefully modulating the surface charge density on Au nanoparticles (NPs), enabling rapid synthesis of Au@ZnO core-shell NPs at room temperature. The resulting Au@ZnO core-shell NPs exhibit a significantly enhanced plasmonic absorption in the visible range due to the Au NP cores. They also show a significantly improved photocatalytic performance in comparison with their single-component counterparts, i.e., the Au NPs and ZnO NPs. Moreover, the high catalytic activity of the as-synthesized Au@ZnO core-shell NPs can be maintained even after many cycles of photocatalytic reaction. Our results shed light on the fact that the Au@ZnO core-shell NPs represent a promising class of candidates for applications in plasmonics, surface-enhanced spectroscopy, light harvest devices, solar energy conversion, and degradation of organic pollutants.

Surface- and Tip-Enhanced Raman Spectroscopy in Catalysis

Surface- and tip-enhanced Raman spectroscopy (SERS and TERS) techniques exhibit highly localized chemical sensitivity, making them ideal for studying chemical reactions, including processes at catalytic surfaces. Catalyst structures, adsorbates, and reaction intermediates can be observed in low quantities at hot spots where electromagnetic fields are the strongest, providing ample opportunities to elucidate reaction mechanisms. Moreover, under ideal measurement conditions, it can even be used to trigger chemical reactions. However, factors such as substrate instability and insufficient signal enhancement still limit the applicability of SERS and TERS in the field of catalysis. By the use of sophisticated colloidal synthesis methods and advanced techniques, such as shell-isolated nanoparticle-enhanced Raman spectroscopy, these challenges could be overcome.

High Performance Dye-Sensitized Solar Cells with Enhanced Light-Harvesting Efficiency Based on Polyvinylpyrrolidone-Coated Au-TiO2 Microspheres

Surface plasmon resonance using noble metal nanoparticles is regarded as an attractive and viable strategy to improve the optical absorption and/or photocurrent in dye-sensitized solar cells (DSSCs). However, no significant improvement in device performance has been observed. The bottleneck is the stability of the noble-metal nanoparticles caused by chemical corrosion. Here, we propose a simple method to synthesize high-performance DSSCs based on polyvinylpyrrolidone-coated Au-TiO2 microspheres that utilize the merits of TiO2 microspheres and promote the coupling of surface plasmons with visible light. When 0.4 wt % Au nanoparticles were embedded into the TiO2 microspheres, the device achieved a power conversion efficiency (PCE) as high as 10.49%, a 7.9% increase compared with pure TiO2 microsphere-based devices. Simulation results theoretically confirmed that the improvement of the PCE is caused by the enhancement of the absorption cross-section of dye molecules and photocurrent.

Surface Plasmon Resonance Effect in Inverted Perovskite Solar Cells

This work reports on incorporation of spectrally tuned gold/silica (Au/SiO₂) core/shell nanospheres and nanorods into the inverted perovskite solar cells (PVSC). The band gap of hybrid lead halide iodide (CH₃NH₃PbI₃) can be gradually increased by replacing iodide with increasing amounts of bromide, which can not only offer an appreciate solar radiation window for the surface plasmon resonance effect utilization, but also potentially result in a large open circuit voltage. The introduction of localized surface plasmons in CH₃NH₃PbI_2.85Br_0.15-based photovoltaic system, which occur in response to electromagnetic radiation, has shown dramatic enhancement of exciton dissociation. The synchronized improvement in photovoltage and photocurrent leads to an inverted CH₃NH₃PbI_2.85Br_0.15 planar PVSC device with power conversion efficiency of 13.7%. The spectral response characterization, time resolved photoluminescence, and transient photovoltage decay measurements highlight the efficient and simple method for perovskite devices.

Single-crystalline aluminum film for ultraviolet plasmonic nanolasers

Significant advances have been made in the development of plasmonic devices in the past decade. Plasmonic nanolasers, which display interesting properties, have come to play an important role in biomedicine, chemical sensors, information technology, and optical integrated circuits. However, nanoscale plasmonic devices, particularly those operating in the ultraviolet regime, are extremely sensitive to the metal and interface quality. Thus, these factors have a significant bearing on the development of ultraviolet plasmonic devices. Here, by addressing these material-related issues, we demonstrate a low-threshold, high-characteristic-temperature metal-oxide-semiconductor ZnO nanolaser that operates at room temperature. The template for the ZnO nanowires consists of a flat single-crystalline Al film grown by molecular beam epitaxy and an ultrasmooth Al₂O₃ spacer layer synthesized by atomic layer deposition. By effectively reducing the surface plasmon scattering and metal intrinsic absorption losses, the high-quality metal film and the sharp interfaces formed between the layers boost the device performance. This work should pave the way for the use of ultraviolet plasmonic nanolasers and related devices in a wider range of applications.

Gold nanorods coated by oxygen-deficient TiO2 as an advanced photocatalyst for hydrogen evolution

Gold nanorods coated by oxygen-deficient TiO₂ are synthesized by slow hydrolysis followed with high-temperature annealing in a reducing atmosphere. The hydrogenated product Au@H-TiO₂ shows enhanced photocatalytic ability in hydrogen generation.

Plasmon resonance energy transfer and hot electron injection induced high photocurrent density in liquid junction Ag@Ag2S sensitized solar cells

Due to plasmon induced absorption enhancement and direct hot electron injection, a high photocurrent density of ∼25.6 mA cm⁻² was demonstrated in an Ag@Ag₂S co-sensitized solar energy conversion device.

Ag plasmonic nanostructures and a novel gel electrolyte in a high efficiency TiO2/CdS solar cell

A novel photoanode architecture with plasmonic silver (Ag) nanostructures embedded in titania (TiO2), which served as the wide band gap semiconducting support and CdS quantum dots (QDs), as light absorbers, is presented. Ag nanostructures were prepared by a polyol method and are comprised of clumps of nanorods, 15-35 nm wide, interspersed with globular nanoparticles and they were characterized by a face centered cubic lattice. Optimization of Ag nanostructures was achieved on the basis of a superior power conversion efficiency (PCE) obtained for the cell with a Ag/TiO2/CdS electrode encompassing a mixed morphology of Ag nano-rods and particles, relative to analogous cells with either Ag nanoparticles or Ag nanorods. Interfacial charge transfer kinetics was unraveled by fluorescence quenching and lifetime studies. Ag nanostructures improve the light harvesting ability of the TiO2/CdS photoanode via (a) plasmonic and scattering effects, which induce both near- and far-field enhancements which translate to higher photocurrent densities and (b) charging effects, whereby, photoexcited electron transfer from TiO2 to Ag is facilitated by Fermi level equilibration. Owing to the spectacular ability of Ag nanostructures to increase light absorption, a greatly increased PCE of 4.27% and a maximum external quantum efficiency of 55% (at 440 nm) was achieved for the cell based on Ag/TiO2/CdS, greater by 42 and 66%, respectively, compared to the TiO2/CdS based cell. In addition, the liquid S(2-) electrolyte was replaced by a S(2-) gel containing fumed silica, and the redox potential, conductivity and p-type conduction of the two were deduced to be comparable. Although the gel based cells showed diminished solar cell performances compared to their liquid counterparts, nonetheless, the Ag/TiO2/CdS electrode continued to outperform the TiO2/CdS electrode. Our studies demonstrate that Ag nanostructures effectively capture a significant chunk of the electromagnetic spectrum and aid QD solar cells in delivering high power conversion efficiencies.

Single-Crystalline Aluminum Nanostructures on a Semiconducting GaAs Substrate for Ultraviolet to Near-Infrared Plasmonics

Aluminum, as a metallic material for plasmonics, is of great interest because it extends the applications of surface plasmon resonance into the ultraviolet (UV) region and is superior to noble metals in natural abundance, cost, and compatibility with modern semiconductor fabrication processes. Ultrasmooth single-crystalline metallic films are beneficial for the fabrication of high-definition plasmonic nanostructures, especially complex integrated nanocircuits. The absence of surface corrugation and crystal boundaries also guarantees superior optical properties and applications in nanolasers. Here, we present UV to near-infrared plasmonic resonance of single-crystalline aluminum nanoslits and nanoholes. The high-definition nanostructures are fabricated with focused ion-beam milling into an ultrasmooth single-crystalline aluminum film grown on a semiconducting GaAs substrate with a molecular beam epitaxy method. The single-crystalline aluminum film shows improved reflectivity and reduced two-photon photoluminescence (TPPL) due to the ultrasmooth surface. Both linear scattering and nonlinear TPPL are studied in detail. The nanoslit arrays show clear Fano-like resonance, and the nanoholes are found to support both photonic modes and localized surface plasmon resonance. We also found that TPPL generation is more efficient when the excitation polarization is parallel rather than perpendicular to the edge of the aluminum film. Such a counterintuitive phenomenon is attributed to the high refractive index of the GaAs substrate. We show that the polarization of TPPL from aluminum preserves the excitation polarization and is independent of the crystal orientation of the film or substrate. Our study gains insight into the optical property of aluminum nanostructures on a high-index semiconducting GaAs substrate and illustrates a practical route to implement plasmonic devices onto semiconductors for future hybrid nanodevices.

Noble metal@metal oxide semiconductor core@shell nano-architectures as a new platform for gas sensor applications

This feature article focuses on recent research progress in noble metal@metal oxides core@shell NPs for gas sensor applications.

Sustainable synthesis of highly efficient sunlight-driven Ag embedded AgCl photocatalysts

Microbe-free broth synthesis was performed under solar light to give Ag nanoparticle embedded AgCl in 5 minutes with superior performance than P25 for organic pollutant degradation.

Panchromatic enhancement of light-harvesting efficiency in dye-sensitized solar cells using thermally annealed Au@SiO₂ triangular nanoprisms

Plasmonic enhancement is an attractive method for improving the efficiency of dye-sensitized solar cells (DSSCs). Plasmonic materials with sharp features, such as triangular metal nanoparticles, show stronger plasmonic effects than their spherical analogues; however, these nanoparticles are also often thermally unstable. In this work, we investigated the thermal stability of Au@SiO2 triangular nanoprisms by annealing at different temperatures. Morphological changes were observed at temperatures greater than 250 °C, which resulted in a blue shift of the localized surface plasmon resonance (LSPR). Annealing at 450 °C led to a further blue shift; however, this resulted in better overlap of the LSPR with the absorption spectrum of black dye. By introducing 0.05% (w/w) Au@SiO2 nanoprisms into DSSCs, we were able to achieve a panchromatic enhancement of the light-harvesting efficiency. This led to a 15% increase in the power conversion efficiency from 3.9 ± 0.6% to 4.4 ± 0.4%.

The modulation effect of transverse, antibonding, and higher-order longitudinal modes on the two-photon photoluminescence of gold plasmonic nanoantennas

Plasmonic nanoantennas exhibit various resonant modes with distinct properties. Upon resonant excitation, plasmonic gold nanoantennas can generate strong two-photon photoluminescence (TPPL). The TPPL from gold is broadband and depolarized, and may serve as an ideal local source for the investigation of antenna eigenmodes. In this work, TPPL spectra of three arrays of single-crystalline gold nanoantennas are comprehensively investigated. We carefully compare the TPPL spectra with dark-field scattering spectra and numerically simulated spectra. We show the modulation effect of the transverse resonant mode and the nonfundamental longitudinal mode on the TPPL spectrum. We also demonstrate suppression of TPPL due to the subradiant antibonding modes and study the influence of antenna resonant modes on the overall TPPL yield. Our work provides direct experimental evidence on nanoantenna-mediated near-to-far-field energy coupling and gains insight into the emission spectrum of the TPPL from gold nanoantennas.

Photocurrent enhancement of HgTe quantum dot photodiodes by plasmonic gold nanorod structures

The near-field effects of noble metal nanoparticles can be utilized to enhance the performance of inorganic/organic photosensing devices, such as solar cells and photodetectors. In this work, we developed a well-controlled fabrication strategy to incorporate Au nanostructures into HgTe quantum dot (QD)/ZnO heterojunction photodiode photodetectors. Through an electrostatic immobilization and dry transfer protocol, a layer of Au nanorods with uniform distribution and controllable density is embedded at different depths in the ZnO layer for systematic comparison. More than 80 and 240% increments of average short-circuit current density (Jsc) are observed in the devices with Au nanorods covered by ∼7.5 and ∼4.5 nm ZnO layers, respectively. A periodic finite-difference time-domain (FDTD) simulation model is developed to analyze the depth-dependent property and confirm the mechanism of plasmon-enhanced light absorption in the QD layer. The wavelength-dependent external quantum efficiency spectra suggest that the exciton dissociation and charge extraction efficiencies are also enhanced by the Au nanorods, likely due to local electric field effects. The photodetection performance of the photodiodes is characterized, and the results show that the plasmonic structure improves the overall infrared detectivity of the HgTe QD photodetectors without affecting their temporal response. Our fabrication strategy and theoretical and experimental findings provide useful insight into the applications of metal nanostructures to enhance the performance of organic/inorganic hybrid optoelectronic devices.

Metal/Semiconductor hybrid nanostructures for plasmon-enhanced applications

Hybrid nanostructures composed of semiconductor and plasmonic metal components are receiving extensive attention. They display extraordinary optical characteristics that are derived from the simultaneous existence and close conjunction of localized surface plasmon resonance and semiconduction, as well as the synergistic interactions between the two components. They have been widely studied for photocatalysis, plasmon-enhanced spectroscopy, biotechnology, and solar cells. In this review, the developments in the field of (plasmonic metal)/semiconductor hybrid nanostructures are comprehensively described. The preparation of the hybrid nanostructures is first presented according to the semiconductor type, as well as the nanostructure morphology. The plasmonic properties and the enabled applications of the hybrid nanostructures are then elucidated. Lastly, possible future research in this burgeoning field is discussed.

A new dielectric ta-C film coating of Ag-nanoparticle hybrids to enhance TiO2 photocatalysis

We have demonstrated a novel method to enhance TiO₂ photocatalysis by adopting a new ultrathin tetrahedral-amorphous-carbon (ta-C) film coating on Ag nanoparticles to create strong plasmonic near-field enhancement. The result shows that the decomposition rate of methylene blue on the Ag/10 Å ta-C/TiO₂ composite photocatalyst is ten times faster than that on a TiO₂ photocatalyst and three times faster than that on a Ag/TiO₂ photocatalyst. This can be ascribed to the simultaneous realization of two competitive processes: one that excites the surface plasmons (SPs) of the ta-C-film/Ag-nanoparticle hybrid and provides a higher electric field near the ta-C/TiO₂ interface compared to Ag nanoparticles alone, while the other takes advantage of the dense diamond-like ta-C layer to help reduce the transfer of photogenerated electrons from the conduction band of TiO₂ to the metallic surface, since any electron transfer will suppress the excitation of SP modes in the metal nanoparticles.

Enhancement of perovskite-based solar cells employing core-shell metal nanoparticles

Recently, inorganic and hybrid light absorbers such as quantum dots and organometal halide perovskites have been studied and applied in fabricating thin-film photovoltaic devices because of their low-cost and potential for high efficiency. Further boosting the performance of solution processed thin-film solar cells without detrimentally increasing the complexity of the device architecture is critically important for commercialization. Here, we demonstrate photocurrent and efficiency enhancement in meso-superstructured organometal halide perovskite solar cells incorporating core-shell Au@SiO2 nanoparticles (NPs) delivering a device efficiency of up to 11.4%. We attribute the origin of enhanced photocurrent to a previously unobserved and unexpected mechanism of reduced exciton binding energy with the incorporation of the metal nanoparticles, rather than enhanced light absorption. Our findings represent a new aspect and lever for the application of metal nanoparticles in photovoltaics and could lead to facile tuning of exciton binding energies in perovskite semiconductors.