Shape-dependent electrocatalytic activity of monodispersed palladium nanocrystals toward formic acid oxidation

Effect of Synchrotron X-ray Irradiation Time on the Particle Size and DFAFC Performance of Pd/CNT Catalysts

Global energy sources are limited, and energy requirements are ever-increasing due to the demand for developments in human life and technology. The environmentally friendly direct formic acid fuel cell (DFAFC) is an attractive electronic device due to its clean energy. In a DFAFC, an anodic catalyst plays an important role concerning the oxidation pathway and activity. In the present study, palladium (Pd) was synthesized by synchrotron X-ray photoreduction using various irradiation times (0.5-4 min) to control the particle size. An acid-treated carbon nanotube (A-CNT) was used as the template for Pd deposition. The A-CNT and Pd/A-CNT were examined using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and transmission electron microscopy to reveal the microstructural characteristics. Electrochemical evaluation, electrocatalytic activity, and the DFAFC performance of so-obtained Pd/A-CNT catalysts were investigated. The experiment's results showed that the Pd/A-CNT-2 (i.e., synchrotron photoreduction for 2 min) underwent a direct formic acid oxidation pathway and possessed a high ECSA value of 62.59 m2/gPd and superior electrocatalytic activity of 417.7 mA/mgPd. In a single DFAFC examination, the anodic Pd/A-CNT-2 catalyst had a power density of 106.2 mW/mgPd and a relatively long lifetime of 2.91 h. Pd/A-CNT-2 anodic catalysts synthesized by surfactant-free synchrotron X-ray photoreduction with a rapid processing time (2 min) are potential candidates for DFAFC applications.

Systematic Study on the Precursor Reduction Kinetics and Growth Pattern for Size-Tunable Palladium Nanocubes

Unveiling the underlying chemistry during the growth of well-defined nanocrystals is a fundamental but challenging task in materials chemistry. Herein, Pd NCs with tunable sizes ranging from 4.5 to 23.5 nm have been synthesized in the presence of potassium acetate (KOAc). The Pd precursor variation trends of these preparation systems along with reaction time have been determined using a UV-vis spectrometer, and corresponding reduction kinetic parameters, including the apparent reduction rate constant (k) and activation energy (Ea), are calculated by regarding the reduction processes as quasi-first-order reactions. It is confirmed that the introduction of KOAc does not affect the value of the Ea of different reaction systems. The interrelationship of k, product size (d), and reaction temperature (T) is discussed in depth. Results indicate that the three parameters are closely related, and for given reaction systems, they are specified. With the careful investigation of six specific systems (reaction systems with 10 mM, 20 mM KOAc at 55 °C, with 5 mM, 10 mM KOAc at 65 °C, without KOAc at 75 °C, and with 5 mM KOAc at 85 °C), the growth pattern of Pd NCs is described with an empirical expression and is further confirmed as a synergistic result of k and T.

Modulate the metallic Sb state on ultrathin PdSb-based nanosheets for efficient formic acid electrooxidation

Incorporation of oxophilic metals into Pd-based nanostructures has shown great potential in small molecule electrooxidation owing to their superior anti-poisoning capability. However, engineering the electronic structure of oxophilic dopants in Pd-based catalysts remains challenging and their impact on electrooxidation reactions is rarely demonstrated. Herein, we have developed a method for synthesizing PdSb-based nanosheets, enabling the incorporation of the Sb element in a predominantly metallic state despite its high oxophilic nature. Moreover, the Pd₉₀Sb₇W₃ nanosheet serves as an efficient electrocatalyst for the formic acid oxidation reaction (FAOR), and the underlying promotion mechanism is investigated. Among the as-prepared PdSb-based nanosheets, the Pd₉₀Sb₇W₃ nanosheet exhibits a remarkable 69.03% metallic state of Sb, surpassing the values observed for the Pd₈₆Sb₁₂W₂ (33.01%) and Pd₈₃Sb₁₄W₃ (25.41%) nanosheets. X-ray photoelectron spectroscopy (XPS) and CO stripping experiments confirm that the Sb metallic state contributes the synergistic effect of their electronic and oxophilic effect, thus leading to an effective electrooxidation removal of CO and significantly enhanced FAOR electrocatalytic activity (1.47 A mg^-1; 2.32 mA cm^-1) compared with the oxidated state of Sb. This work highlights the importance of modulating the chemical valence state of oxophilic metals to enhance electrocatalytic performance, offering valuable insights for the design of high-performance electrocatalysts for electrooxidation of small molecules.

Leveraging Pd(100)/SnO2 interfaces for highly efficient electrochemical formic acid oxidation

The electrocatalytic formic acid oxidation (FAO) is the crucial anodic reaction of direct formic acid fuel cells (DFAFCs), but its activity remains to be largely improved in order to be practically viable. The rational development of enhanced catalysts requires thorough consideration of various contributing factors that are possibly integrated in composite systems. Here, we demonstrate that, Pd(100)/SnO₂ interfaces, provided being efficiently exploited, can significantly boost FAO activity by a factor of ∼10, compared with pure Pd(100) facets, with the mass activity reaching a record of 14.55 A mg_Pd^-1 at a 40 mV-lower peak potential. Unique Pd/SnO₂ nanocomposites with a myriad of Pd(100)/SnO₂ interfaces were obtained by a newly developed successive seeded growth strategy, wherein pre-formed SnO₂ nanospheres are used as seeds for two-round overgrowth of multitudinous Pd nanocubes. Using electron microscopic, electrochemical, spectroscopic and computational analyses, we found that the Pd(100)/SnO₂ interfaces induce lattice contraction and electron loss on Pd nanocubes, which optimize intermediate binding during FAO. Moreover, we showed that the good cubicity of the Pd nanocubes and the presence of SnO₂ nearby further promote the activity by facilitating the potential-determining step and the elimination of the poisoning CO intermediate, respectively. As such, the combined high intrinsic activity and number density of Pd(100)/SnO₂ interfaces enabled the superior activity of the Pd/SnO₂ nanocomposites. The composite material presented here holds promise for application in DFAFCs, but equally importantly, the insights regarding the structure-performance relationship would be beneficial for designing efficient metal/oxide composite catalysts for diverse electro- and photo-catalytic reactions.

Role of Surface Strain at Nanocrystalline Pt{110} Facets in Oxygen Reduction Catalysis

We have developed a synthesis method of rhombic dodecahedral Pd@Pt core-shell nanocrystals bound exclusively by {110} facets with controlled numbers of Pt atomic layers to study the surface strain-catalytic activity relationship of Pt{110} facets. Through control over growth kinetics, the epitaxial and conformal overgrowth of Pt shells on the {110} facets of rhombic dodecahedral Pd nanocrystals could be achieved. Notably, the electrocatalytic activity of the Pd@Pt nanocrystals toward oxygen reduction reaction decreased as their Pt shells became thinner and thus more in-plane compressive surface strain was applied, which is in sharp contrast to previous reports on Pt-based catalysts. Density functional theory calculations revealed that the characteristic strain-activity relationship of Pt{110} facets is the result of the counteraction of out-of-plane surface strain against the applied in-plane surface strain, which can effectively impose a tensile environment on the surface atoms of the Pd@Pt nanocrystals under the compressive in-plane strain.

Modulation of Nano-superstructures and Their Optical Properties

Self-assembly, which enables spontaneous arrangement of objects, is of particular importance for nanomaterials in both fundamental and applied research fields. Multiple types of nanoparticle superstructures have been successfully built in highly controllable and efficient manners through balancing the nanoscale interactions. Uniform and proper arrangement of nanoparticles inside the assembled superstructures is essential to exhibit their constant, reliable, and homogeneous functionalities. To be specific, the long-range ordered superlattices not only succeed with their building blocks' intrinsic property, but also, more importantly, can display collective properties that are absent both in individual nanoparticles and in their bulk states. One of the most attractive aspects of nanomaterials is their exceptional optical properties that have tremendous application potential in multidisciplinary fields. In this regard, constructing the superstructures from optical nano units like noble metal nanostructures, semiconductor nanoparticles, or hybrid nanomaterials is critical for attaining the unique optical properties and exploring their practical applications in multiple fields including photonics, optoelectronics, optical sensing, photocatalysis, etc. In this Account, we provide guidelines for self-assembly strategies to fabricate the superstructures and discuss the optical properties that the superstructures display. In the first part, we categorize and discuss the key factors that strongly affect the self-assembly process and determine the configurational and integral quality of the superstructures. On one hand, the diversity and designability of nanoparticles offer the intrinsic complexity of the building blocks, including geometry, size, composition, and surface ligand, which efficiently tailors the assembly process and superstructure configuration. On the other hand, multiple factors originating from the introduction of extrinsic features are recognized to facilitate the metastable or dynamic self-assembly process. Such extrinsic features include both matter like DNA origami, peptides, small molecules, etc. and nonmatter involved with electric fields, magnetic fields, light, temperature, etc. In the second part, we introduce the state-of the art progress on the collective optical performances of the assembled superstructures, including (1) chiral optics, such as circular dichroism and circularly polarized luminescence, (2) plasmonic properties and related applications, and (3) luminescence related optics and their applications. Finally, we summarize the existing problems and main challenges briefly, and some future directions of this field are proposed. We envision that, with deep understanding of the assembly mechanism and development of the synthetic and surface chemistry, rational modulation of nanoassemblies will be the trend of this field, which is beneficial to achieve the emerging collective performances and create new generation devices with advanced functions.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells - Part I - Fundamentals and Pd Based Catalysts

Direct formic acid fuel cells (DFAFCs) have gained immense importance as a source of clean energy for portable electronic devices. It outperforms other fuel cells in several key operational and safety parameters. However, slow kinetics of the formic acid oxidation at the anode remains the main obstacle in achieving a high power output in DFAFCs. Noble metal-based electrocatalysts are effective, but are expensive and prone to CO poisoning. Recently, a substantial volume of research work have been dedicated to develop inexpensive, high activity and long lasting electrocatalysts. Herein, recent advances in the development of anode electrocatalysts for DFAFCs are presented focusing on understanding the relationship between activity and structure. This review covers the literature related to the electrocatalysts based on noble metals, non-noble metals, metal-oxides, synthesis route, support material, and fuel cell performance. The future prospects and bottlenecks in the field are also discussed at the end.

Palladium hydride with high-index facets for enhanced methanol oxidation

Nobel metal catalysts with high-index facets feature a high density of steps and kink sites, which bring about high activity but could be unstable during the electrocatalytic process. Doping with interstitial hydrogen atoms is a unique and effective way to regulate the electronic structure of the host materials. The formation of hydride also helps to stabilize the active sites on the surface of catalysts. Herein, we demonstrate the conformal doping of H atoms into the Pd nanostructure with preferential exposure of {730} facets, forming concave nanocubes of palladium hydride. Compared to the palladium counterparts, the palladium hydride catalysts show enhanced activity and stability in electrocatalytic methanol oxidation, and the structural differences between the Pd and PdH catalysts are revealed by XRD and X-ray photoelectron spectroscopy. Our work presents a powerful strategy for designing durable catalysts with high performance by combining high-index facet with interstitial atom doping.

Importance of Surface Topography in Both Biological Activity and Catalysis of Nanomaterials: Can Catalysis by Design Guide Safe by Design?

It is acknowledged that the physicochemical properties of nanomaterials (NMs) have an impact on their toxicity and, eventually, their pathogenicity. These properties may include the NMs’ surface chemical composition, size, shape, surface charge, surface area, and surface coating with ligands (which can carry different functional groups as well as proteins). Nanotopography, defined as the specific surface features at the nanoscopic scale, is not widely acknowledged as an important physicochemical property. It is known that the size and shape of NMs determine their nanotopography which, in turn, determines their surface area and their active sites. Nanotopography may also influence the extent of dissolution of NMs and their ability to adsorb atoms and molecules such as proteins. Consequently, the surface atoms (due to their nanotopography) can influence the orientation of proteins as well as their denaturation. However, although it is of great importance, the role of surface topography (nanotopography) in nanotoxicity is not much considered. Many of the issues that relate to nanotopography have much in common with the fundamental principles underlying classic catalysis. Although these were developed over many decades, there have been recent important and remarkable improvements in the development and study of catalysts. These have been brought about by new techniques that have allowed for study at the nanoscopic scale. Furthermore, the issue of quantum confinement by nanosized particles is now seen as an important issue in studying nanoparticles (NPs). In catalysis, the manipulation of a surface to create active surface sites that enhance interactions with external molecules and atoms has much in common with the interaction of NP surfaces with proteins, viruses, and bacteria with the same active surface sites of NMs. By reviewing the role that surface nanotopography plays in defining many of the NMs’ surface properties, it reveals the need for its consideration as an important physicochemical property in descriptive and predictive toxicology. Through the manipulation of surface topography, and by using principles developed in catalysis, it may also be possible to make safe-by-design NMs with a reduction of the surface properties which contribute to their toxicity.

Enhanced Formic Acid Oxidation over SnO2-decorated Pd Nanocubes

The formic acid oxidation reaction (FAOR) is one of the key reactions that can be used at the anode of low-temperature liquid fuel cells. To allow the knowledge-driven development of improved catalysts, it is necessary to deeply understand the fundamental aspects of the FAOR, which can be ideally achieved by investigating highly active model catalysts. Here, we studied SnO₂-decorated Pd nanocubes (NCs) exhibiting excellent electrocatalytic performance for formic acid oxidation in acidic medium with a SnO₂ promotion that boosts the catalytic activity by a factor of 5.8, compared to pure Pd NCs, exhibiting values of 2.46 A mg^-1 _Pd for SnO₂@Pd NCs versus 0.42 A mg^-1 _Pd for the Pd NCs and a 100 mV lower peak potential. By using ex situ, quasi in situ, and operando spectroscopic and microscopic methods (namely, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption fine-structure spectroscopy), we identified that the initially well-defined SnO₂-decorated Pd nanocubes maintain their structure and composition throughout FAOR. In situ Fourier-transformed infrared spectroscopy revealed a weaker CO adsorption site in the case of the SnO₂-decorated Pd NCs, compared to the monometallic Pd NCs, enabling a bifunctional reaction mechanism. Therein, SnO₂ provides oxygen species to the Pd surface at low overpotentials, promoting the oxidation of the poisoning CO intermediate and, thus, improving the catalytic performance of Pd. Our SnO _x -decorated Pd nanocubes allowed deeper insight into the mechanism of FAOR and hold promise for possible applications in direct formic acid fuel cells.

In situ one-step synthesis of polymer-functionalized palladium nanoparticles: an efficient anticancer agent against breast cancer

Breast cancer is the most common malignancy among women worldwide, and researchers are working to discover effective treatments to eradicate breast cancer. In the present study, we prepared PVP-functionalized palladium nanoparticles (PVP-PdNPs) for the treatment of human breast cancer MCF7 cells. Initially, the PVP-functionalized PdNPs were synthesized by an in situ method and confirmed with DRS-UV spectrometric analysis. Further, FTIR and Raman spectroscopic analyses showed the association of PVP with PdNPs by showing the vibrational mode of the PdNPs and C[double bond, length as m-dash]O stretch and CH₂ band modes of PVP. Microscopic analysis showed that the PVP-PdNPs have a narrow size distribution with spherical shapes and a size range between 9 and 15 nm. The SAED and XRD patterns confirmed that the crystalline structure is face-centered cubic in nature, and EDAX mapping confirmed the formulation of PVP on the surface of the PdNPs. Further, in vitro MTT assay analysis showed that the PVP-PdNPs exhibit excellent cytotoxic activity against human breast cancer MCF7 cells in a dose-dependent manner. The PVP-PdNPs generate continuous ROS in the mitochondria; this leads to the damage of the mitochondrial membrane potential and nuclear DNA and induces apoptosis through caspase3/7 enzymatic activity. Together, the PVP-PdNPs are a promising potential anticancer agent against human breast cancer.

Synthesis of Palladium Nanodendrites Using a Mixture of Cationic and Anionic Surfactants

Surfactants are used widely to control the synthesis of shaped noble-metal nanoparticles. In this work, a mixture of hexadecyltrimethylammonium bromide (CTAB), a cationic surfactant; sodium oleate (NaOL), an anionic surfactant; palladium chloride; and a reducing agent were used in the seed-mediated synthesis of palladium nanoparticles. By controlling the surfactant mixture ratio, we initially discovered that palladium nanodendrites with narrow size distribution were formed instead of the traditional nanocubes, synthesized with only CTAB. In order to investigate the optimal ratio to produce Pd nanodendrites with a high yield and narrow size distribution, samples synthesized with multiple molar ratios of the two surfactants were prepared and studied by transmission electron microscopy, dynamic light scattering, conductance, and ultraviolet-visible spectroscopy. We propose that the addition of NaOL alters the arrangement of surfactants on the Pd seed surface, leading to a new pattern of growth and aggregation. By studying the nanodendrite growth over time, we identified the reduction period of Pd²⁺ ions and the formation period of the nanodendrites. Our further experiments, including the replacement of CTAB with hexadecyltrimethylammonium chloride (CTAC) and the replacement of NaOL with sodium stearate, showed that CTA⁺ ions in CTAB and OL^- ions in NaOL play the main roles in the formation of nanodendrites. The formation of palladium nanodendrites was robust and achieved with a range of temperatures, pH and mixing speeds.

Synthesis of low- and high-index faceted metal (Pt, Pd, Ru, Ir, Rh) nanoparticles for improved activity and stability in electrocatalysis

Driven by the quest for future energy solution, faceted metal nanoparticles are being pursued as the next generation electrocatalysts for renewable energy applications. Thanks to recent advancement in solution phase synthesis, different low- and high-index facets on metal nanocrystals become accessible and are tested for specific electrocatalytic reactions. This minireview summarises the key approaches to prepare nanocrystals containing the most catalytically active platinum group metals (Pt, Pd, Ru, Ir and Rh) exposed with low- and high-index facets using solution phase synthesis. Electrocatalytic studies related to the different facets are highlighted to emphasise the importance of exposing facets for catalysing these reactions, namely oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), alcohol oxidation including methanol (MOR) and ethanol oxidation reactions (EOR), formic acid oxidation reaction (FAOR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The future outlook discusses the challenges and opportunities for making electrocatalysts that are even more active and stable.

Shape- and size-dependences of gold nanostructures on the electrooxidation of methanol under visible light irradiation

Plasmonic metal nanocatalysts have excellent light trapping properties and high chemical reactivity. Impressively, Au nanostructures can absorb a wide array of visible light by tuning their morphology. In this work, spherical gold nanoparticles (Au NSs), multi-branched gold nanoparticles (Au NMs) and gold nanorods (Au NRs) were successfully synthesized; the shape- and size-dependences of these gold nanocatalysts on the methanol oxidation reaction (MOR) under light irradiation were studied. It is worth mentioning that Au NRs have the highest anode peak current density under dark conditions due to the exposure of highly active facets. A similar enhancement effect was obtained for Au NSs and Au NMs under visible light irradiation, which is due to the generation of a high concentration of energetic charge carriers on these Au nanostructures. The size dependences of Au NSs on the MOR showed that a larger electrochemically active surface area (ECSA) was obtained for small nanoparticles, which is due to the surface effect. In addition, the catalytic performance, durability and anti-CO stripping of these Au nanocatalysts under visible light irradiation, as well as the effect of light intensity and wavelength were described in detail. This work provides an insight into the mechanism of plasmon enhanced electrocatalysis by Au nanostructures with different sizes and shapes.

Shape-Controlled Nanoparticles as Anodic Catalysts in Low-Temperature Fuel Cells

The great dependence of the electrocatalytic activity of most electrochemical reactions on the catalytic surface area and specific surface structure is widely accepted. Building on the extensive knowledge already available on single-crystal surfaces, this Perspective discusses the recent progress made in low-temperature fuel cells through the use of the most active shape-controlled noble metal-based nanoparticles. In particular, we will focus on discussing structure-composition-reactivity correlations in methanol, ethanol, and formic acid oxidation reactions and will offer a general vision of future needs.

Formic Acid Oxidation on Pd Thin Film Coated Au Nanocrystals

Cubic, octahedral, and rhombic dodecahedral gold nanocrystals enclosed by {100}, {111}, and {110} facets, respectively, were prepared by a seed-mediated growth method at the room temperature. Palladium thin films were coated on these Au nanocrystals by a redox replacement approach to explore their catalytic activities. It is revealed that formic acid and carbon monoxide oxidation in 0.1 M HClO4 on Au nanocrystals coated with one monolayer (ML) of Pd are facet-dependent and resemble those obtained from corresponding Pd single crystals and Pd films deposited on bulk Au single crystals, suggesting epitaxial growth of Pd overlayers on the Au nanocrystal surfaces. As the Pd film thickness increased, formic acid oxidation current density decreased and the CO oxidation potential moved to more negative. The catalytic activity remained largely unchanged after 3–5 MLs of Pd deposition. The specific adsorption of (bi)sulfate was shown to hinder the formic acid oxidation and the effect decreased with the increasing Pd film thickness. These observations were explained in the framework of the d-band theory. This study highlights the feasibility of engineering high-performance catalysts through deposition of catalytically active metal thin films on facet-controlled inert nanocrystals.

Shape-controlled metal nanoparticles for electrocatalytic applications

The application of shape-controlled metal nanoparticles is profoundly impacting the field of electrocatalysis. On the one hand, their use has remarkably enhanced the electrocatalytic activity of many different reactions of interest. On the other hand, their usage is deeply contributing to a correct understanding of the correlations between shape/surface structure and electrochemical reactivity at the nanoscale. However, from the point of view of an electrochemist, there are a number of questions that must be fully satisfied before the evaluation of the shaped metal nanoparticles as electrocatalysts including (i) surface cleaning, (ii) surface structure characterization, and (iii) correlations between particle shape and surface structure. In this chapter, we will cover all these aspects. Initially, we will collect and discuss about the different practical protocols and procedures for obtaining clean shaped metal nanoparticles. This is an indispensable requirement for the establishment of correct correlations between shape/surface structure and electrochemical reactivity. Next, we will also report how some easy-to-do electrochemical experiments including their subsequent analyses can enormously contribute to a detailed characterization of the surface structure of the shaped metal nanoparticles. At this point, we will remark that the key point determining the resulting electrocatalytic activity is the surface structure of the nanoparticles (obviously, the atomic composition is also extremely relevant) but not the particle shape. Finally, we will summarize some of the most significant advances/results on the use of these shaped metal nanoparticles in electrocatalysis covering a wide range of electrocatalytic reactions including fuel cell-related reactions (electrooxidation of formic acid, methanol and ethanol and oxygen reduction) and also CO2 electroreduction.

Graphical Abstract:

Galvanic replacement mediated 3D porous PtCu nano-frames for enhanced ethylene glycol oxidation

Galvanic replacement mediated 3D porous PtCu nano-frames possessed enhanced electrocatalytic activity and stability during ethylene glycol oxidation.

Visualizing Facet-Dependent Hydrogenation Dynamics in Individual Palladium Nanoparticles

Surface faceting in nanoparticles can profoundly impact the rate and selectivity of chemical transformations. However, the precise role of surface termination can be challenging to elucidate because many measurements are performed on ensembles of particles and do not have sufficient spatial resolution to observe reactions at the single and subparticle level. Here, we investigate solute intercalation in individual palladium hydride nanoparticles with distinct surface terminations. Using a combination of diffraction, electron energy loss spectroscopy, and dark-field contrast in an environmental transmission electron microscope (TEM), we compare the thermodynamics and directly visualize the kinetics of 40-70 nm {100}-terminated cubes and {111}-terminated octahedra with approximately 2 nm spatial resolution. Despite their distinct surface terminations, both particle morphologies nucleate the new phase at the tips of the particle. However, whereas the hydrogenated phase-front must rotate from [111] to [100] to propagate in cubes, the phase-front can propagate along the [100], [11̅0], and [111] directions in octahedra. Once the phase-front is established, the interface propagates linearly with time and is rate-limited by surface-to-subsurface diffusion and/or the atomic rearrangements needed to accommodate lattice strain. Following nucleation, both particle morphologies take approximately the same time to reach equilibrium, hydrogenating at similar pressures and without equilibrium phase coexistence. Our results highlight the importance of low-coordination number sites and strain, more so than surface faceting, in governing solute-driven reactions.

Facile Synthesis of Porous Pd3 Pt Half-Shells with Rich "Active Sites" as Efficient Catalysts for Formic Acid Oxidation

Exploring highly efficient electrocatalysts is greatly important for the widespread uptake of the fuel cells. However, many newly generated nanocrystals with attractive nanostructures often have extremely limited surface area or large particle-size, which leads them to display limited electrocatalytic performance. Herein, a novel anode catalyst of hollow and porous Pd₃ Pt half-shells with rich "active sites" is synthesized by using urea as a guiding surfactant. It is identified that the formation of Pd₃ Pt half-shells involves the combination of bubble guiding, in situ deposition of particles and bubble burst. The obtained Pd₃ Pt half-shells demonstrate a rich edge area with abundant exposed active sites and surface defects, indicating great potential for the electrocatalysis. When used as an electrocatalyst, the Pd₃ Pt half-shells exhibit remarkably improved electrocatalytic performance for formic acid oxidation (FAO), where it promotes the dehydrogenation process of FAO by suppressing the formation of poisonous species CO_ads via the electronic effect and ensemble effect.

An In situ TEM study of the surface oxidation of palladium nanocrystals assisted by electron irradiation

The surface oxidation of palladium nanocrystals plays an important role in changing the active sites and subsequently influencing the catalytic reactivity. Such a microscopy study on surface oxidation, down to the atomic scale, is essential for understanding the structure-property correlations of palladium nanocrystal based catalysts. Herein, we present an in situ atomic scale study on the surface oxidation behavior of palladium nanocrystals, which is induced by electron beam irradiation under low oxygen partial pressure and at room temperature inside an environmental transmission electron microscope. We found that: (i) surface oxidation initially started at the edge sites with atomic steps or vertex sites, which served as active sites for oxidation; (ii) the oxidation reaction proceeded with a much faster rate on the {111} surface, indicating a certain crystallography preference; (iii) nanometer-sized palladium monoxide islands were formed on the surfaces eventually. The results from our in situ studies provide insightful knowledge, and will be of certain importance for the design of improved functional catalysts in future.

Pd-on-Au Supra-nanostructures Decorated Graphene Oxide: An Advanced Electrocatalyst for Fuel Cell Application

We report a very easy and effective approach for synthesizing unique palladium-on-gold supra-nanostructure (Au@Pd-SprNS)-decorated graphene oxide (GO) nanosheets. The SprNSs comprising Au nanorods as core and a unique close-packed assembly of tiny anisotropic Pd nanoparticles (NPs) as shell were homogeneously distributed on the GO surface via electrostatic self-assembly. Compared with the traditional one-pot method for synthesis of metal NPs on GO sheets, the size and shape of core-shell Au@Pd SprNSs can be finely controlled and uniformly distributed on the GO carrier. Interestingly, this Au@Pd-SprNSs/GO nanocomposite displayed high electrocatalytic activities toward the oxidation of methanol, ethanol, and formic acid, which can be attributed to the abundance of intrinsic active sites including high density of atomic steps, ledges and kinks, Au-Pd heterojunctions and cooperative action of the two metals of the SprNSs. Additionally, uniform dispersion of the SprNSs over the GO nanosheets prevent agglomeration between the SprNSs, which is of great significance to enhance the long-term stability of catalyst. This work will introduce a highly efficient Pd-based nanoelectrocatalyst to be used in fuel cell application.

Noble-Metal Nanocrystals with Controlled Facets for Electrocatalysis

Noble-metal nanocrystals (NCs) show excellent catalytic performance for many important electrocatalysis reactions. The crystallographic properties of the facets by which the NCs are bound, closely associated with the shape of the NCs, have a profound influence on the electrocatalytic function of the NCs. To develop an efficient strategy for the synthesis of NCs with controlled facets as well as compositions, understanding of the growth mechanism of the NCs and their interaction with the chemical species involved in NC synthesis is quite important. Furthermore, understanding the facet-dependent catalytic properties of noble-metal NCs and the corresponding mechanisms for various electrocatalysis reactions will allow for the rational design of robust electrocatalysts. In this review, we summarize recently developed synthesis strategies for the preparation of mono- and bimetallic noble-metal NCs by classifying them by the type of facets through which they are enclosed and discuss the electrocatalytic applications of noble-metal NCs with controlled facets, especially for reactions associated with fuel-cell applications, such as the oxygen reduction reaction and fuel (methanol, ethanol, and formic acid) oxidation reactions.

Deep insights into the growth pattern of palladium nanocubes with controllable sizes

In this work, the growth pattern of size controllable Pd nanocubes is studied systematically under a variety of reaction conditions.

Cuboctahedral vs. octahedral platinum nanoclusters: insights into the shape-dependent catalytic activity for fuel cell applications

The shape of a catalyst plays an important role in any catalytic reaction.

Hierarchically porous Pd nanospheres: facile synthesis and their application in HCOOH electrooxidation

With the help of rhodamine B base, hierarchically porous Pd nanospheres with highly electrocatalytic activity were synthesized very facilely.

Faceted metal and metal oxide nanoparticles: design, fabrication and catalysis

The review addresses new advances in metal, bimetallic, metal oxide, and composite particles in their nanoregime for facet-selective catalytic applications. The synthesis and growth mechanisms of the particles have been summarized in brief in this review with a view to develop critical examination of the faceted morphology of the particles for catalysis. The size, shape and composition of the particles have been found to be largely irrelevant in comparison to the nature of facets in catalysis. Thus selective high- and low-index facets have been found to selectively promote adsorption, which eventually leads to an effective catalytic reaction. As a consequence, a high density of atoms rest at the corners, steps, stages, kinks etc on the catalyst surface in order to host the adsorbate efficiently and catalyze the reaction. Again, surface atomic arrangement and bond length have been found to play a dominant role in adsorption, leading to effective catalysis.

A Simple Green Synthesis of Palladium Nanoparticles with Sargassum Alga and Their Electrocatalytic Activities Towards Hydrogen Peroxide

This study presents the synthesis of palladium nanoparticles (PdNPs) using the extract derived from the marine alga, Sargassum bovinum, collected from Persian Gulf area. Water-soluble compounds that exist in the marine alga extract were the main cause of the reduction of palladium ions to Pd nanoparticles. The basic properties of PdNPs produced in this method were confirmed by UV-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray (EDX) analysis, and Fourier transform infrared spectroscopy (FTIR). TEM confirmed the monodispersed and octahedral shape of PdNPs within the size ranges from 5 to 10 nm. Catalytic performance of the biosynthetic PdNPs was investigated by electrochemical reduction of hydrogen peroxide (H2O2). PdNP-modified carbon ionic liquid electrode (PdNPs/CILE) was developed as a nonenzymatic sensor for the determination of hydrogen peroxide. Amperometric measurements showed that PdNPs/CILE is a reliable sensor for the detection of hydrogen peroxide in the range of 5.0 μM-15.0 mM with a sensitivity of 284.35 mAmM(-1) cm(-2) and a detection limit of 1.0 μM. Moreover, PdNPs/CILE exhibits a wide linear range, high sensitivity and selectivity, and excellent stability for the detection of H2O2 in aqueous solutions.

Direct Synthesis of Palladium Nanocrystals in Aqueous Solution with Systematic Shape Evolution

Palladium octahedra, truncated octahedra, cuboctahedra, truncated cubes, and nanocubes with sizes of tens of nanometers have been synthesized in an aqueous mixture of H2PdCl4 solution, cetyltrimethylammonium chloride (CTAC) surfactant, KBr solution, dilute KI solution, and ascorbic acid solution at 35 °C for 30 min. By tuning the amount of dilute KBr solution introduced, particle shape control can be achieved. Adjusting the volumes of the Pd precursor and KBr solutions added, smaller and larger Pd nanocrystals were obtained with excellent shape control. Extensive structural and optical characterization of these nanocrystals has been performed. Two absorption bands in the ultraviolet region can be discerned for these Pd nanocrystals. Concave Pd cubes can also be prepared. Pd cubes were found to grow at a faster rate than that for the formation of octahedra. The concentrations of KBr and KI in the solution are so low that spectral shifts were not detected upon their addition to the solution. The Pd nanocrystals can readily be used for various applications after simple removal of surfactant.

Trimetallic PtCuCo hollow nanospheres with a dendritic shell for enhanced electrocatalytic activity toward ethylene glycol electrooxidation

In this work, by utilizing galvanic replacement reaction, a simple method for the synthesis of trimetallic PtCuCo hollow nanospheres with a dendritic shell is demonstrated. The compositions of the nanospheres can be well controlled, and the electrocatalytic activity can also be modulated by adjusting their compositions. Electrocatalytic results show that all of the as-prepared trimetallic PtCuCo nanomaterials show better catalytic performance toward ethylene glycol electrooxidation than the commercial catalyst.