Facile and novel electrochemical preparation of a graphene-transition metal oxide nanocomposite for ultrasensitive electrochemical sensing of acetaminophen and phenacetin

Synchronous analysis of acetaminophen, codeine, and caffeine in human fluids employing graphite screen-printed electrodes

A facile electrochemical approach is proposed for the synchronous determination of acetaminophen (ACP), codeine (COD) and caffeine (CAF) utilizing unmodified screen-printed electrodes (SPEs). The determination of ACP, COD and CAF has been explored across different supporting electrolytes including sulfuric acid (H2SO4), hydrochloric acid (HCl), phosphoric acid (H3PO4) and Briton Robinson (B.R) buffer solutions. It was found that a 0.05 mol L-1 sulfuric acid solution is an optimal supporting electrolyte utilized for voltammetric analysis of ACP, COD, and CAF with improved sensitivity, stability, and reproducibility. The electro-analytical sensing of ACP, COD and CAF was investigated using SPEs within linear concentration ranges of 3.0-35.0 μmol L-1, 10-160 μmol L-1 and 10-160 μmol L-1 and revealed competitively low limits of detection (3S/N) of 0.9, 4.8 and 6.3 μmol L-1 for ACP, COD and CAF, respectively. The results indicated the possibility of such a simple and quick electroanalytical protocol for online monitoring of pharmaceutical formulations comprising ACP, COD, and CAF drugs in human fluids with satisfactory recovery.

Simultaneous monitoring of amoxicillin and paracetamol in synthetic biological fluids using a 3D printed disposable electrode with a lab-made conductive filament

In this work, we are pleased to present for the first time a 3D-printed electrochemical device using a lab-made conductive filament based on graphite (Gr) and polylactic acid (PLA) polymer matrix for the simultaneous detection of amoxicillin (AMX) and paracetamol (PAR). The sensor was properly characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Compared to the commercial glassy carbon electrode (GCE), the superior performance of the 3D-Gr/PLA electrode was verified with a 3.8-fold more favored charge transfer. A differential pulse voltammetry (DPV) method was proposed providing a linear working range of 4 to 12 μmol L-1 for both analytes and a limit of detection (LOD) of 0.80 and 0.51 μmol L-1 for AMX and PAR, respectively. Additionally, repeatability studies (n = 5, RSD < 5.7%) indicated excellent precision, and recovery percentages ranging from 89 to 109% when applied to synthetic human urine, saliva, and plasma samples, attested to the accuracy of the method. The studies also indicate that the sensor does not suffer significant interference from common substances (antibiotics and biomarkers) present in the biological fluids, which makes it a promising analytical tool considering its low-cost, ease of manufacturing, robustness, and electrochemical performance.

An Overview of Electrochemical Sensors Based on Transition Metal Carbides and Oxides: Synthesis and Applications

Sensors play vital roles in industry and healthcare due to the significance of controlling the presence of different substances in industrial processes, human organs, and the environment. Electrochemical sensors have gained more attention recently than conventional sensors, including optical fibers, chromatography devices, and chemiresistors, due to their better versatility, higher sensitivity and selectivity, and lower complexity. Herein, we review transition metal carbides (TMCs) and transition metal oxides (TMOs) as outstanding materials for electrochemical sensors. We navigate through the fabrication processes of TMCs and TMOs and reveal the relationships among their synthesis processes, morphological structures, and sensing performance. The state-of-the-art biological, gas, and hydrogen peroxide electrochemical sensors based on TMCs and TMOs are reviewed, and potential challenges in the field are suggested. This review can help others to understand recent advancements in electrochemical sensors based on transition metal oxides and carbides.

Enhanced Thermoelectric Performance in the SrTi0.85Nb0.15O3 Oxide Nanocomposite with Fe2O3-Functionalized Graphene

Doped SrTiO3 is considered one of the potential thermoelectric (TE) candidates but its TE figure of merit, ZT needs to be improved for practical application of electricity generation from high-grade waste-heat. In the present work, enhanced TE performance has been realized for SrTi0.85Nb0.15O3 (STN) perovskite adopting the strategy of composite formation with Fe2O3-functionalized graphene (FGR). We have achieved a maximum electrical conductivity of 1.4 × 105 S m-1 for 1 wt % FGR added to STN, which is around 1185% larger than that of pristine STN. The presence of FGR in the STN matrix acts as a mobility booster of electrons, overcoming the effect of Anderson localization of electrons, which impedes the electron transport in STN. This is evident from the order of magnitude increase in weighted mobility of STN after FGR addition. Furthermore, the incorporation of FGR causes about a 34% decrease in the lattice thermal conductivity. The Debye-Callaway model demonstrates that the phonon-phonon Umklapp scattering is primarily responsible for reduced thermal conductivity. The presence of FGR sheets along the grain boundaries of STN, Fe2O3 nanoparticles, and lattice imperfections gives rise to the glass-like temperature-independent phonon mean-free-path, especially above Debye temperature. The maximum ZT ∼ 0.57 has been obtained at 947 K for the 1 wt % FGR sample, which is around 420% higher than that of pristine STN. Furthermore, we have fabricated a prototype of a four-legged n-type TE module, demonstrating one of the highest power outputs of 18 mW among reported oxide thermoelectrics.

Enhancement in electrical conductivity of liquid crystals by graphene metal oxide composites

Enhancing the electrical conductivity of liquid crystal (LC) circumvents challenges for application in advanced electronic components. Toward this, using additives made of different nanostructures that could result in functional LCs is suggested. In this paper, various concentrations of graphene (Gr)/metal-oxide (Fe₃O₄) nanocomposite (GMN) (0.0001-1 w%) were added to E7 nematic LC. We found that the role of anisotropic Gr flakes, their edges as well as surface-decorated-metal-oxide-additives have significant impact on electrical properties of E7. A range of appropriate additives of such a nanocomposite enhances the electrical conductivity of LCs. This effect can be traced through the decrease in the formation of GMN aggregates in the E7 and increase in the electrostatic field at the edges of the Gr sheets. Moreover, the presence of metal-oxide nanoclusters due to the presence of oxygen vacancies and defects facilitates the construction of conductive network for improving the charge transfer pathways and contributes to a stronger interaction of the Gr surface with charged species. These factors can provide Gr layers as dipole moments and lead to signal propagation in the dielectric medium. Our finding conveys a pathway toward significant enhancement of electrical conductivity in the LC family which can be useful for functional applications.

Novel ruthenium-doped vanadium carbide/polymeric nanohybrid sensor for acetaminophen drug detection in human blood

The use of advanced electroactive catalysts enhances the performance of electrochemical biosensors in real-time biomonitoring and has received much attention owing to its excellent physicochemical and electrochemical possessions. In this work, a novel biosensor was developed based on the electrocatalytic activity of functionalized vanadium carbide (VC) material, including VC@ruthenium (Ru), VC@Ru-polyaniline nanoparticles (VC@Ru-PANI-NPs) as non-enzymatic nanocarriers for the fabrication of modified screen-printed electrode (SPE) to detect acetaminophen in human blood. As-prepared materials were characterized using SEM, TEM, XRD, and XPS techniques. Biosensing was carried out using cyclic voltammetry and differential pulse voltammetry techniques and has revealed imperative electrocatalytic activity. A quasi-reversible redox method of the over-potential of acetaminophen increased considerably compared with that at the modified electrode and the bare SPE. The excellent electrocatalytic behaviour of VC@Ru-PANI-NPs/SPE is attributed to its distinctive chemical and physical properties, including rapid electron transfer, striking ᴫ-ᴫ interface, and strong adsorptive capability. This electrochemical biosensor exhibits a detection limit of 0.024 μM, in a linear range of 0.1-382.72 μM with a reproducibility of 2.45 % relative standard deviation, and a good recovery from 96.69 % to 105.59 %, the acquired results ensure a better performance compared with previous reports. The enriched electrocatalytic activity of this developed biosensor is mainly credited to its high surface area, better electrical conductivity, synergistic effect, and abundant electroactive active sites. The real-world utility of the VC@Ru-PANI-NPs/SPE-based sensor was ensured via the investigation of biomonitoring of acetaminophen in human blood samples with satisfactory recoveries.

A bibliometric analysis of graphene in acetaminophen detection: Current status, development, and future directions

Acetaminophen is a widely used analgesic throughout the world. Detection of acetaminophen has particular value in pharmacy and clinics. Electrochemical sensors assembled with advanced materials are an effective method for the rapid detection of acetaminophen. Graphene-based carbon nanomaterials have been extensively investigated for potential analytical applications in the last decade. In this article, we selected papers containing both graphene and acetaminophen. Bibliometrics was used to analyze the relationships and trends among these papers. The results show that the topic has grown at a high rate since 2009. Among them, the detection of acetaminophen by an electrochemical sensor based on graphene is the most important direction. Graphene has moved from being a primary sensing material to a substrate for immobilization of other active ingredients. In addition, the degradation of acetaminophen using graphene-modified electrodes is also an important direction. We analyzed the research history and current status of this topic through bibliometrics. Authors, institutions, countries, and key literature were discussed. We also proposed perspectives for this topic.

Nonenzymatic Glucose Sensor Based on Porous Co3O4 Nanoneedles

Herein, porous Co3O4 nanoneedle arrays were synthesized on nickel (Ni) foam (Co3O4 NNs/NF) by one-step hydrothermal method. Some electrochemical methods were used to investigate its nonenzymatic glucose sensing performance in alkaline solution. The results show that the sensitivity of Co3O4 NNs/NF electrode to glucose is 4570 μA mM-1 cm-2. The linear range is 1 μM-0.337 mM, and the detection limit is 0.91 μM ( $S/N=3$ ). It also displays good selectivity and repeatability for glucose. The good electrochemical sensing performance of Co3O4 NNs/NF based sensor for glucose can be attributed to interconnected porous structure and large specific surface area of Co3O4.

Construction of a Hierarchical Structure of Bimetallic Oxide Derived from Metal-Organic Frameworks

Bimetallic oxides are a class of promising advanced functional metal nanomaterials, especially in terms of the sophisticated hierarchical structure of bimetallic oxide, which not only is in favor of enhancing their intrinsic physiochemical properties because of more accessible actives sites but also is capable of integrating the synergistic effect between two metals. Herein, we report a novel strategy to controllably construct bimetallic CuO/ZnO nanomaterials with sophisticated hierarchical structure through a pseudomorphic transformation and subsequent calcination process. The resulting unique hierarchical structure of ZnO/CuO is primarily constituted of a nanosphere and a rod grafted in a microscale cube with multidimensional size, which thus results in excellent dispersion, superior charge-transport capability, and abundant accessible active sites. Impressively, the optimized hierarchical structure product of CuO/ZnO (4:1) demonstrates an excellent glucose detection performance with a rapid response time, a wide linear range, a low detection limit, and strong antiinterference ability, realizing more advantages than commercial CuO or ZnO materials and shedding light on the positive correlation of the structure and performance. This study provides a new strategy for the controllable fabrication of the sophisticated hierarchical structure of bimetallic oxide nanomaterials.

An electrochemical sensor based on electrospun MoS2@SnO2 modified carbon nanofiber composite materials for simultaneously detection ofphenacetin and indomethacin

SnO 2 -CNF was prepared by coaxial blending technology, and MoS 2 was grown uniformly on SnO 2 -CNF composite by combining hydrothermal post-treatment step. The uniform distribution of MoS 2 on one-dimensional SnO 2 -CNF can effectively establish a layered three-dimensional structure. So that the prepared MoS 2 coated SnO 2 -CNF composite material has higher surface area and more active sites to obtain better electrochemical performance. We constructed an electrochemical sensor within the composite material with enhanced performance to realize the simultaneous and highly sensitive detection of phenacetin and indomethacin for the first time. The sensor proves the linear ranges of 0.050-7200 μM and 0.05-500 μM respectively, and the detection limits were 0.016 μM and 0.013 μM. And the sensor has good anti-interference ability and stability, which also achieves good recovery rate in the actual sample detection .

Carbon Nanomaterial-Based Drug Sensing Platforms Using State-of-the- Art Electroanalytical Techniques

Background:

Currently, nanotechnology and nanomaterials are considered as the most popular and outstanding research subjects in scientific fields ranging from environmental studies to drug analysis. Carbon nanomaterials such as carbon nanotubes, graphene, carbon nanofibers etc. and non-carbon nanomaterials such as quantum dots, metal nanoparticles, nanorods etc. are widely used in electrochemical drug analysis for sensor development. Main aim of drug analysis with sensors is developing fast, easy to use and sensitive methods. Electroanalytical techniques such as voltammetry, potentiometry, amperometry etc. which measure electrical parameters such as current or potential in an electrochemical cell are considered economical, highly sensitive and versatile techniques.

Methods:

Most recent researches and studies about electrochemical analysis of drugs with carbon-based nanomaterials were analyzed. Books and review articles about this topic were reviewed.

Results:

The most significant carbon-based nanomaterials and electroanalytical techniques were explained in detail. In addition to this; recent applications of electrochemical techniques with carbon nanomaterials in drug analysis was expressed comprehensively. Recent researches about electrochemical applications of carbon-based nanomaterials in drug sensing were given in a table.

Conclusion:

Nanotechnology provides opportunities to create functional materials, devices and systems using nanomaterials with advantageous features such as high surface area, improved electrode kinetics and higher catalytic activity. Electrochemistry is widely used in drug analysis for pharmaceutical and medical purposes. Carbon nanomaterials based electrochemical sensors are one of the most preferred methods for drug analysis with high sensitivity, low cost and rapid detection.

Electrochemical approach toward reduced graphene oxide-based electrodes for environmental applications: A review

Graphene has shown great potential in various application fields due to its excellent carrier transportation, ultra-high specific surface area, good mechanical properties, and light transmittance. However, pure graphene still exhibits some insurmountable defects, such as difficulty in simple and large-scale preparation, and limitations in application. The electrochemical method is a simple, clean, and environmentally friendly method. The rapid and simple preparation of graphene and its derivatives by electrochemical methods has important environmental significance. Moreover, rGO-based nanohybrids can be prepared by convenient and quick electrodeposition or cyclic voltammetry (CV), or to change the morphology and structure of graphene and its derivatives to achieve the purpose of improving material properties. This work mainly summarizes electrochemically related graphene from four aspects: (i) the method of electrochemical exfoliation of graphene; (ii) types of electrodeposition rGO-based nanohybrids; (iii) electrochemical regulation of the structure of rGO-based mixtures; (iv) environmental applications of rGO-based nanohybrids prepared by electrodeposition. This article critically discusses the advantages and disadvantages of electrochemical-related graphene, outlines future challenges, and provides insightful views and references for other researchers.

Synthesis and characterization of bipyridine cobalt(ii) complex modified graphite screen printed electrode: an electrochemical sensor for simultaneous detection of acetaminophen and naproxen

The new Co(ii) compound [Co(5,5'-dmbpy)2(NCS)2] (a1) was prepared by reacting Co(NO3)2·6H2O, 5,5'-dimethyl-2,2'-bipyridine ligand, and Na(SCN). The nano-scale size of [Co(5,5'-dmbpy)2(NCS)2] (a1) was synthesized using sonochemical process. The size of the nanoparticles (a2) was ∼13 ± 2 nm. We have also provided a new platform of electrochemical sensing for simultaneous detection of acetaminophen and naproxen using (a2) surface modified graphite screen printed electrode (SPE) in 0.1 M phosphate buffer solution (PBS, pH 7.0). In contrast to bare SPE, the modified SPE could significantly improve the electrooxidation activity of acetaminophen along with the rise in the current of an anodic peak. The peak currents acquired using differential pulse voltammetry (DPV) raised linearly with the raising of acetaminophen concentration and the sensor had a detection range over the concentration range of 0.009-325.0 μM, with a detection limit of 5.0 nM (S/N = 3). In the case of naproxen peak, currents of naproxen oxidation at the modified SPE were linearly dependent on the naproxen amounts in the range of 1.0-500.0 μM. The detection limit (S/N = 3) was calculated to be 0.03 μM. The DPV responses show that the peaks of acetaminophen and naproxen oxidation were vividly separated from one other with a potential difference of 410 mV between them. The low detection limit, high sensitivity, and stability made the relevant electrode applicable for the analysis of acetaminophen and naproxen in real samples. Further, its practical applicability was reliable and desirable in the analysis of pharmaceutical compounds and biological fluids. The benefits of using this modified electrode for the determination of analytes are compared with other works in the manuscript.

Soft-template-assisted synthesis: a promising approach for the fabrication of transition metal oxides

The past few decades have witnessed transition metal oxides (TMOs) as promising candidates for a plethora of applications in numerous fields. The exceptional properties retained by these materials have rendered them of paramount emphasis as functional materials. Thus, the controlled and scalable synthesis of transition metal oxides with desired properties has received enormous attention. Out of different top-down and bottom-up approaches, template-assisted synthesis predominates as an adept approach for the facile synthesis of transition metal oxides, owing to its phenomenal ability for morphological and physicochemical tuning. This review presents a comprehensive examination of the recent advances in the soft-template-assisted synthesis of TMOs, focusing on the morphological and physicochemical tuning aided by different soft-templates. The promising applications of TMOs are explained in detail, emphasizing those with excellent performances.

In situ formation of Co3O4 hollow nanocubes on carbon cloth-supported NiCo2O4 nanowires and their enhanced performance in non-enzymatic glucose sensing

Diabetes is a chronic disease that can seriously affect human health. Therefore it is important to develop a rapid and highly sensitive enzyme-free glucose sensor to aid the treatment of diabetes. In this work, homogeneous NiCo₂O₄ nanowire arrays were synthesized in an orderly fashion on flexible carbon cloth (CC) by a facile hydrothermal method. Then well-structured zeolitic imidazolate framework (ZIF-67) nanocubes were grown in situ on the as-prepared NiCo₂O₄ nanowires to form a hybrid nanoarchitecture. The hierarchical structure was transformed into a Co₃O₄/NiCo₂O₄/CC composite after annealing in the air. The as-prepared electrode was put into 0.1 M NaOH, and cyclic voltammetry and amperometry were employed to investigate its electrocatalytic properties at room temperature. It was found that the Co₃O₄/NiCo₂O₄/CC electrode exhibited outstanding sensing properties towards glucose, including terrific sensitivity (12.835 mA mM^-1 cm^-2), a wide linear range (from 1 μM to 1.127 mM), a low detection limit (0.64 μM) and a fast response time (within 2 s). In addition, it also had excellent selectivity, reproducibility and stability. The improvement in enzyme-free glucose sensing, in addition to the high porosity and large specific surface area of metal organic framework-derived Co₃O₄ hollow nanocubes, can be attributed to the NiCo₂O₄ nanowire arrays affording fast channels for electron transfer between CC and Co₃O₄. Accordingly, this method, which directly prepares hierarchical composite nanomaterials on a conductive substrate, may open up a new perspective for the enhancement of non-enzymatic glucose-sensing properties.

Simultaneous voltammetric determination of acetaminophen, naproxen, and theophylline using an in-situ polymerized poly(acrylic acid) nanogel covalently grafted onto a carbon black/La2O3 composite

Lanthanum oxide nanomaterials were decorated with carbon black (CB) and grafted with a poly(acrylic acid) nanogel to obtain a composite material (CB-g-PAA/La₂O₃) for simultaneous determination of acetaminophen (AMP), naproxen (NPX), and theophylline (TPH). The nanogel was synthesized by in-situ free radical polymerization. The composite was dropped onto a glassy carbon electrode (GCE), and the modified GCE displays robust electrocatalytic activity towards AMP, NPX, and TPH, with voltammetric signals that are enhanced compared to a bare GCE. Features of merit for AMP, NPX, and TPH, respectively, include (a) peak potentials of 0.42, 0.85 and 0.12 V (vs. Ag/AgCl), (b) linear ranges from 0.05-887, 0.05-884, and 0.02-888 μM, and (c) detection limits of 20, 35, and 15 nM. The practical applicability of the CB-g-PAA/La₂O₃/GCE was illustrated by analyzing serum and urine samples. Graphical abstract Schematic presentation of simultaneous electrochemical sensing of acetaminophen (AMP), naproxen (NPX), and theophylline (TPH) in real sample analysis using poly(acrylic acid) nanogel covalently grafted onto a carbon black/La₂O₃ composite (CB-g-PAA/La₂O₃/GCE).

Fast and flexible strategy to produce electrochemical paper-based analytical devices using a craft cutter printer to create wax barrier and screen-printed electrodes

This paper describes a simple, low-cost, and highly flexible rapid prototyping method to construct electrochemical paper-based analytical device (ePAD) for multiplexed analyte determinations. The ePAD was composed of two electrochemical cell (EC) compartments, separated by hydrophobic barriers of wax, and screen-printed electrodes (SPEs) deposited directly over the surface of the filter paper. The ePAD was entirely constructed using an inexpensive craft cutter printer with no needed of a wax printer. The rapid prototyping method involves two steps: the deposition of the SPEs and the creation of the wax barriers. In this case, the SPEs were screen-printed on filter paper by using adhesive tape as mask by cutting the electrodes pattern with the cutter printer. Following, the wax barriers were created using stamps made of filter paper also cut with the printer and impregnated with wax. In the ePAD, each ECs containing an array of 4-working electrodes, allowing up to 4 replicates in a single measurement. Both ECs shared one counter and one reference electrodes, permitting the simultaneous multianalysis. The ePAD was successfully applied to simultaneous detection of paracetamol (PAR), caffeine (CAF), and ascorbic acid (AA) in drugs. PAR and CAF were detected in a sample using one EC and AA was detected, in a different sample, on the other EC, both with no chemical modifications in the working electrodes. Limits of detection of 0.04 mmol L^-1 for PAR, 0.22 mmol L^-1 for CAF, and 0.40 mmol L^-1 for AA were obtained. The construction process proposed provide an easy way to implement screen-printing electrodes and wax barriers in filter paper to create electrochemical devices for fast and simultaneous multianalysis.

Fabrication of RGO-NiCo2O4 nanorods composite from deep eutectic solvents for nonenzymatic amperometric sensing of glucose

A novel reduced graphene oxide supported nickel cobaltate nanorods composite (RGO-NiCo₂O₄) was prepared by a simple ionothermal method in deep eutectic solvents for the first time. Electrochemical results demonstrated that the obtained nanocomposite modified glassy carbon electrode exhibited excellent electrocatalytic performance towards the oxidation of glucose with a wide double-linear range from 1 μM to 25 mM and a low detection limit of 0.35 μM (S/N = 3). NiCo₂O₄ nanorods with many small interconnected nanoparticles provided many electrocatalytic active sites, while RGO with large surface area offered good electrical conductivity. The synergistic effect between NiCo₂O₄ nanorods and RGO contributed to the enhanced sensing ability of the hybrid nanostructure. This sensitive glucose sensor can be also used for the practical detection of glucose in human serum.

Synergic effect of silver nanoparticles and carbon nanotubes on the simultaneous voltammetric determination of hydroquinone, catechol, bisphenol A and phenol

A glassy carbon electrode (GCE) was modified with multi-walled carbon nanotubes (MWCNT) and silver nanoparticles (AgNPs) and applied to the simultaneous determination of hydroquinone (HQ), catechol (CC), bisphenol A (BPA) and phenol by using square-wave voltammetry. The MWCNTs were deposited on the GCE and the AgNPs were then electrodeposited onto the MWCNT/GCE by the application of 10 potential sweep cycles using an AgNP colloidal suspension. The modified GCE was characterized by using SEM, which confirmed the presence of the AgNPs. The electrochemical behavior of the material was evaluated by using cyclic voltammetry, and by electrochemical impedance spectroscopy that employed hexacyanoferrate as an electrochemical probe. The results were compared to the performance of the unmodified GCE. The modified electrode has a lower charge-transfer resistance and yields an increased signal. The peaks for HQ (0.30 V), CC (0.40 V), BPA (0.74 V) and phenol (0.83 V; all versus Ag/AgCl) are well separated under optimized conditions, which facilitates their simultaneous determination. The oxidation current increases linearly with the concentrations of HQ, CC, BPA and phenol. Detection limits are in the order of 1 μM for all 4 species, and the sensor is highly stable and reproducible. The electrode was successfully employed with the simultaneous determination of HQ, CC, BPA and phenol in spiked tap water samples. Graphical abstract A glassy carbon electrode was modified with carbon nanotubes and silver nanoparticles and then successfully applied to the simultaneous determination of four phenolic compounds. The sensor showed high sensitivity in the detection of hydroquinone, catechol, bisphenol A and phenol in water samples.

An ultrasensitive chemiluminescence aptasensor for indirect hemin detection based on aptamer recognition materials

MGO@H-Atp@Co-PP polymers were successfully prepared and used to construct a MGO@H-Atp@Co-PP-CL aptasensor.

All-in-One Beaker Method for Large-Scale Production of Metal Oxide Hollow Nanospheres Using Nanoscale Kirkendall Diffusion

A simple and easily scalable process for the formation of metal oxide hollow nanospheres using nanoscale Kirkendall diffusion called the "all-in-one beaker method" is introduced. The Fe2O3, SnO2, NiO, and Co3O4 hollow nanospheres are successfully prepared by the all-in-one beaker method. The detailed formation mechanism of aggregate-free hematite hollow nanospheres is studied. Dimethylformamide solution containing Fe acetate, polyacrylonitrile (PAN), and polystyrene (PS) transforms into aggregate-free Fe2O3 hollow nanospheres. The porous structure formed by the combustion of PS provides a good pathway for the reducing gas. The carbon matrix formed from PAN acts as a barrier, which can prevent the aggregation of metallic Fe nanopowders by surrounding each particle. The Fe-C bulk material formed as an intermediate product transforms into aggregate-free Fe2O3 hollow nanospheres by the nanoscale Kirkendall diffusion process. The mean size and shell thickness of the hollow Fe2O3 nanospheres measured from the TEM images are 52 and 9 nm, respectively. The discharge capacities of the Fe2O3 nanopowders with hollow and dense structures and the bulk material for the 200th cycle at a current density of 0.5 A g(-1) are 1012, 498, and 637 mA h g(-1), respectively, and their capacity retentions calculated compared to those in the second cycles are 92, 45, and 59%, respectively. Additionally, Fe2O3 hollow nanospheres cycled at 1 A g(-1) after 1000 cycles showed a high discharge capacity of 871 mA h g(-1) (capacity retention was 80% from the second cycle). The Fe2O3, SnO2, NiO, and Co3O4 hollow nanospheres show excellent cycling performances for lithium-ion storage because they have a high contact area with the liquid electrolyte and space for accommodating a huge volume change during cycling.

Nanostructured materials in electroanalysis of pharmaceuticals

Basic strategies and recent developments for the enhancement of the sensory performance of nanostructures in the electroanalysis of pharmaceuticals are reviewed. A discussion of the properties of nanostructures and their application as modified electrodes for drug assays is presented. The electrocatalytic effect of nanostructured materials and their application in determining low levels of drugs in pharmaceutical forms and biofluids are discussed.

Simultaneous determination of ciprofloxacin and paracetamol by adsorptive stripping voltammetry using copper zinc ferrite nanoparticles modified carbon paste electrode

Development of copper zinc ferrite nanoparticles modified carbon paste electrode for the simultaneous determination of ciprofloxacin and paracetamol using adsorptive stripping differential pulse voltammetry.

Mesoporous CuO–ZnO p–n heterojunction based nanocomposites with high specific surface area for enhanced photocatalysis and electrochemical sensing

Mesoporous and core–shell like (p)CuO–(n)ZnO nanocomposites were prepared using microstructural refinement and solid state reactions, which showed enhanced photochemical and electrochemical performances.

CdTe quantum dots@luminol for trace-level chemiluminescence sensing of phenacetin based on biological recognition materials

The CL signal was amplified by CRET in CdTe QDs@luminol to improve the sensitivity and CsMG-MIP was introduced to improve the selectivity.

An electrochemical sensor for determination of tryptophan in the presence of DA based on poly(l-methionine)/graphene modified electrode

Electrocatalytic oxidation of l-Trp at poly(l-methionine)/graphene composite film modified glassy carbon electrode (PLME/GR/GCE) were investigated by differential pulse voltammetry.