Au-ZnO hybrid nanoflowers, nanomultipods and nanopyramids: one-pot reaction synthesis and photocatalytic properties

Preparation of hollow double-layer Pt@CeO2 nanospheres as oxidase mimetics for the colorimetric-fluorescent-SERS triple-mode detection of glutathione in serum

Glutathione (GSH) is an essential antioxidant in the human body, but its detection is difficult due to the interference of complex components in serum. Herein, hollow double-layer Pt@CeO2 nanospheres were developed as oxidase mimetics, and the light-assisted oxidase mimetics effects were found. The oxidase activity was enhanced significantly by utilizing the synergistic effect of Schottky junction and the localized surface plasmon resonance (LSPR) of Pt under UV light. A novel GSH colorimetric-fluorescent-SERS sensing platform was established, with the sensing performance notably boosted by using the light-assisted oxidase mimetics effects. This platform boasts an exceptionally low detection limit (LOD) of 0.084 μM, while the detection time was shortened from 10 min to just 2 min. The anti-interference detection with high recovery rate (96.84%-107.4 %) in real serum made it be promising for practical application.

Photoassisted High-Performance Lithium Anode Enabled by Oriented Crystal Planes

Lithium (Li) metal anodes are candidates for the next-generation high-performance lithium-ion batteries (LIBs). However, uncontrolable Li dendrite growth leads to safety issues and a low Coulombic efficiency (CE), which hinders the commercialization of Li metal batteries. Stable Li anodes based on the tailored plane deposition and photoassisted synergistic current collectors are currently the subject of research; however, there are few related studies. To suppress the growth of Li dendrites and achieve dense Li deposition, we design a low-cost customized-facet/photoassisted synergistic dendrite-free anode. The tailored (002) plane endows it with a nanorod array/microsphere composite structure and exhibits a strong affinity for Li, which effectively reduces the Li⁺ nucleation overpotential and promotes uniform Li deposition. Notably, during the photoassisted Li deposition/stripping process, due to electron-hole separation, a weakly charged layer is formed on the (002) surface and local charge carrier changes are induced, reducing the overpotential by 8.3 mV, enhancing the reaction kinetics, and resulting in a high CE of ∼99.3% for the 300th cycle at 2 mA cm^-2. This work is of great significance for the field of next-generation photoassisted Li metal anodes.

Machine learning ensures rapid and precise selection of gold sea-urchin-like nanoparticles for desired light-to-plasmon resonance

Sustainable energy strategies, particularly solar-to-hydrogen production, are anticipated to overcome the global reliance on fossil fuels. Thereby, materials enabling the production of green hydrogen from water and sunlight are continuously designed, e.g., ZnO nanostructures coated by gold sea-urchin-like nanoparticles, which employ the light-to-plasmon resonance to realize photoelectrochemical water splitting. But such light-to-plasmon resonance is strongly impacted by the size, the species, and the concentration of the metal nanoparticles coating on the ZnO nanoflower surfaces. Therefore, a precise prediction of the surface plasmon resonance is crucial to achieving an optimized nanoparticle fabrication of the desired light-to-plasmon resonance. To this end, we synthesized a substantial amount of metal (gold) nanoparticles of different sizes and species, which are further coated on ZnO nanoflowers. Subsequently, we utilized a genetic algorithm neural network (GANN) to obtain the synergistically trained model by considering the light-to-plasmon conversion efficiencies and fabrication parameters, such as multiple metal species, precursor concentrations, surfactant concentrations, linker concentrations, and coating times. In addition, we integrated into the model's training the data of nanoparticles due to their inherent complexity, which manifests the light-to-plasmon conversion efficiency far from the coupling state. Therefore, the trained model can guide us to obtain a rapid and automatic selection of fabrication parameters of the nanoparticles with the anticipated light-to-plasmon resonance, which is more efficient than an empirical selection. The capability of the method achieved in this work furthermore demonstrates a successful projection of the light-to-plasmon conversion efficiency and contributes to an efficient selection of the fabrication parameters leading to the anticipated properties.

Theoretical and experimental study of the photodegradation of methyl orange in the presence of different morphologies of Au-ZnO using Monte Carlo dynamic simulation

Herein, a simple approach was formed based on synthesizing different morphologies of ZnO and Au-ZnO as photocatalyst. In this study, ZnO and Au-ZnO were synthesized via a co-precipitation method and fully characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). Three different ratios of Zn2+:OH- (1:2, 1:3, and 1:5) controlled the morphology of samples, which were made into spindle, star, and flower structures, respectively. Then, the photocatalytic activity was studied and compared. Their comparison showed that the flower morphology for ZnO and Au-ZnO was more effective in photocatalytic degradation and decolorization of methyl orange dye. Also, quantum and Monte Carlo (MC) calculations were carried out to investigate the adsorption of methyl orange (MO) molecules on ZnO(111) surface in the presence of Au or without Au in aqueous conditions by Monte Carlo adsorption locator simulations in the Materials Studio 2017 software. Au created a tendency to form a relatively strong interaction of MO with the ZnO(111) surface. The adsorption of MO on Au-ZnO(111) in the presence of Au was more significant than that of MO on ZnO(111), suggesting Au could significantly improve the reactivity of the methyl orange toward the ZnO(111).

Recent advances in ZnO-based photosensitizers: Synthesis, modification, and applications in photodynamic cancer therapy

Zinc oxide nanoparticles (ZnO NPs) are important semiconductor materials with interesting photo-responsive properties. During the past, ZnO-based NPs have received considerable attention for photodynamic therapy (PDT) due to their biocompatibility and excellent potential of generating tumor-killing reactive oxygen species (ROS) through gentle photodynamic activation. This article provides a comprehensive review of the recent developments and improvements in optical properties of ZnO NPs as photosensitizers for PDT. The optical properties of ZnO-based photosensitizers are significantly dependent on their charge separation, absorption potential, band gap engineering, and surface area, which can be adjusted/tuned by doping, compositing, and morphology control. Here, we first summarize the recent progress in the charge separation capability, absorption potential, band gap engineering, and surface area of nanosized ZnO-based photosensitizers. Then, morphology control that is closely related to their synthesis method is discussed. Following on, the state-of-art for the ZnO-based NPs in the treatment of hypoxic tumors is comprehensively reviewed. Finally, we provide some outlooks on common targeted therapy methods for more effective tumor killing, including the attachment of small molecules, antibodies, ligands molecules, and receptors to NPs which further improve their selective distribution and targeting, hence improving the therapeutic effectiveness. The current review may provide useful guidance for the researchers who are interested in this promising dynamic cancer treatment technology.

Low-Temperature, Efficient Synthesis of Highly Crystalline Urchin-like Tantalum Diboride Nanoflowers

Urchin-like tantalum diboride (TaB2) nanoflowers were successfully synthesized via a high-efficiency and energy-saving methodology, molten-salt and microwave co-modified boro/carbothermal reduction, using less expensive B4C as a reducing agent. By taking advantage of the synergistic effects of the molten-salt medium and microwave heating conditions, the onset formation temperature of TaB2 was drastically reduced to below 1000 °C, and phase-pure powders of TaB2 nanoflowers were obtained at temperatures as low as 1200 °C within only 20 min. Notably, the present temperature conditions were remarkably milder than those (>1500 °C for several hours) required by conventional reduction methods, which use the strong, but expensive, reducing agent, elemental boron. The resulting urchin-like TaB2 nanoflowers consisted of numerous uniform single-crystalline nanowires with lengths up to 4.16 μm, and high aspect ratios >10. This result indicated that the as-synthesized urchin-like TaB2 nanoflowers possessed high specific surface area and anisotropic morphology, which were favorable not only for sintering, but also for toughening their bulk counterparts.

One-pot, ligand-free, room-temperature synthesis of Au/Pd/ZnO nanoclusters with ultra-low noble metal loading and synergistically improved photocatalytic performances

Au/Pd/ZnO nanoclusters with ultra-low noble metal loadings were prepared by a one-step and ligand-free method at room temperature. HRTEM, ICP-MS, XPS, and elemental mapping analysis confirmed that the obtained Au/Pd/ZnO nanoclusters were composed of ZnO nanoclusters decorated with well-dispersed AuPd nanoparticles. Au/Pd/ZnO nanoclusters exhibited higher photocatalytic activity compared with those of pristine ZnO, Au/ZnO and Pd/ZnO. Moreover, the high catalytic activity of Au/Pd/ZnO nanoclusters could be maintained even after 5 cycles of photocatalytic reaction. A mechanism for the enhanced photocatalytic performance was also suggested, which was in light of the synergistic effects of the SPR effect from Au and the improved photogenerated charge carrier separation from Pd.

Plasmon-assisted photocatalytic CO2 reduction on Au decorated ZrO2 catalysts

ZrO₂ is one of the most stable metal oxides which is applicable to various chemical reactions in harsh environments. However, the photocatalytic performance of ZrO₂ is relatively poor due to the negligible use of the solar spectrum caused by the wide bandgap (E_g = 5.3 eV). Here, we report plasmon enhanced Au nanoparticles decorated onto ZrO₂ through a facile tannic acid-reduction method. The Au/ZrO₂ heterojunctions exhibited efficient and stable photocatalytic activity of reducing CO₂ into main CO and CH₄, at the rates of 25.6 μmol g^-1 h^-1 and 5.1 μmol g^-1 h^-1 at most, respectively, approximately 6-fold enhanced compared to the pristine ZrO₂, under simulated solar light. The reduction rates could also be improved over 10-fold under visible light when Au nanoparticles were loaded onto ZrO₂. UV-Vis diffuse reflectance spectra confirmed the enhanced visible-light absorption of Au/ZrO₂ caused by localized surface plasmon resonance (LSPR). Electrochemical impedance spectra (EIS) and photocurrent tests proved the more efficient charge transport and electron-hole separation of Au/ZrO₂ heterojunctions. This study demonstrates an effective strategy of LSPR effects to improve the photocatalytic performances of semiconductors.

Improved SERS sensing on biosynthetically grown self-cleaning plasmonic ZnO nano-leaves

Schematic representation of SERS and self-cleaning features of biosynthetically grown ZA nano-hybrids.

Synergy between AgInS2 quantum dots and ZnO nanopyramids for photocatalytic hydrogen evolution and phenol degradation

Despite the unique properties of single semiconductor nanomaterials and quantum dots, poor photocatalytic activity has characterized them and the fabrication of nanocomposites has become necessary to enhance their photocatalytic performance. Thus, AgInS₂ quantum dots (AIS QDs, 4.0 ± 1.6 nm), have been successfully prepared and loaded onto ZnO nanopyramids (ZnO NPy). The effect of the nominal amount of AIS QDs decorating ZnO NPy on the morphology, optical properties, structure and surface chemistry of the nanocomposites was systematically studied. Photocatalytic tests revealed that the 1%AIS@ZnO NPy sample reported the highest photoactivity for phenol degradation in aqueous phase (92 % after one hour of irradiation, λ > 350 nm) that was 4 and 68 times the reported for bare ZnO NPy and AIS QDs, respectively. Accordingly, the maximum photocatalytic hydrogen evolution, under UV-vis light, for the same sample corresponded to 17 and 21 times the estimated for pristine ZnO NPy and AIS QDs, respectively. Hence, the AIS QDs - ZnO system has been applied in the photocatalytic field for the first time in this work and a synergetic effect was confirmed owing to a strong heterojunction formation between both semiconductors that allows an enhanced charge carrier separation, improving the photocatalytic activity.

Doped Zinc Oxide Nanoparticles: Synthesis, Characterization and Potential Use in Nanomedicine

Smart nanoparticles for medical applications have gathered considerable attention due to an improved biocompatibility and multifunctional properties useful in several applications, including advanced drug delivery systems, nanotheranostics and in vivo imaging. Among nanomaterials, zinc oxide nanoparticles (ZnO NPs) were deeply investigated due to their peculiar physical and chemical properties. The large surface to volume ratio, coupled with a reduced size, antimicrobial activity, photocatalytic and semiconducting properties, allowed the use of ZnO NPs as anticancer drugs in new generation physical therapies, nanoantibiotics and osteoinductive agents for bone tissue regeneration. However, ZnO NPs also show a limited stability in biological environments and unpredictable cytotoxic effects thereof. To overcome the abovementioned limitations and further extend the use of ZnO NPs in nanomedicine, doping seems to represent a promising solution. This review covers the main achievements in the use of doped ZnO NPs for nanomedicine applications. Sol-gel, as well as hydrothermal and combustion methods are largely employed to prepare ZnO NPs doped with rare earth and transition metal elements. For both dopant typologies, biomedical applications were demonstrated, such as enhanced antimicrobial activities and contrast imaging properties, along with an improved biocompatibility and stability of the colloidal ZnO NPs in biological media. The obtained results confirm that the doping of ZnO NPs represents a valuable tool to improve the corresponding biomedical properties with respect to the undoped counterpart, and also suggest that a new application of ZnO NPs in nanomedicine can be envisioned.

Janus coordination polymer derived PdO/ZnO nanoribbons for efficient 4-nitrophenol reduction

Bimetallic coordination polymers–Zn(MAA)₂/Pd(ii) nanoribbons are prepared by employing two terminal units with distinct hard–soft properties of the smallest semi-rigid methacrylate anion to combine with two different metal ions.

Pd–Au bimetallic catalysts supported on ZnO for selective 1,3-butadiene hydrogenation

The effect of the ZnO morphology on the properties of Pd–Au bimetallic catalysts has been discussed.

Two Hybrid Au-ZnO Heterostructures with Different Hierarchical Structures: Towards Highly Efficient Photocatalysts

A new paradigm for photocatalysts based on two different hierarchically structured honeycomb and porous cylindrical Au-ZnO heterostructures was successfully developed via a straightforward and cost-effective hydrothermal method under different preparation conditions, which can be promising for industrial applications. The photocatalytic performance of all as-prepared samples under the illumination of sunlight was evaluated by the photocatalytic degradation of rhodamine B (RhB) and malachite green (MG) aqueous solutions. The results show that the photocatalytic degradation efficiency of RhB and MG was 55.3% and 40.7% for ZnO, 95.3% and 93.4% for the porous cylindrical Au-ZnO heterostructure, and 98.6% and 99.5% for the honeycomb Au-ZnO heterostructure, respectively. Compared with those from the ZnO, the results herein demonstrate an excellent reduction in the photoluminescence and improvement in the photocatalysis for the Au-ZnO hybrids with different morphologies. These results were attributed not only to the greatly improved sunlight utilization efficiency due to the surface plasmon resonance (SPR) absorption of Au nanoparticles in the visible region coupled with the UV light utilization by the ZnO nanostructures and multi-reflections of the incident light in the pore structures of their interior cavities but also to the high charge separation efficiency and low Schottky barrier generated by the combination of Au nanoparticles and ZnO micromaterials. Moreover, the honeycomb Au-ZnO heterostructure had a high Au content, surface area and surface oxygen vacancy (O_V), which enabled photocatalytic properties that were higher than those of the porous cylindrical Au-ZnO heterostructures. In addition, two different formation mechanisms for the morphology and possible photocatalytic mechanisms are proposed in this paper.

Surface Functionalization of Grown-on-Tip ZnO Nanopyramids: From Fabrication to Light-Triggered Applications

We report on a combined chemical vapor deposition (CVD)/radio frequency (RF) sputtering synthetic strategy for the controlled surface modification of ZnO nanostructures by Ti-containing species. Specifically, the proposed approach consists in the CVD of grown-on-tip ZnO nanopyramids, followed by titanium RF sputtering under mild conditions. The results obtained by a thorough characterization demonstrate the successful ZnO surface functionalization with dispersed Ti-containing species in low amounts. This phenomenon, in turn, yields a remarkable enhancement of photoactivated superhydrophilic behavior, self-cleaning ability, and photocatalytic performances in comparison to bare ZnO. The reasons accounting for such an improvement are unravelled by a multitechnique analysis, elucidating the interplay between material chemico-physical properties and the corresponding functional behavior. Overall, the proposed strategy stands as an amenable tool for the mastering of semiconductor-based functional nanoarchitectures through ad hoc engineering of the system surface.

Metal/Semiconductor Nanocomposites for Photocatalysis: Fundamentals, Structures, Applications and Properties

Due to the capability of utilizing light energy to drive chemical reactions, photocatalysis has been widely accepted as a green technology to help us address the increasingly severe environment and energy issues facing human society. To date, a large amount of research has been devoted to enhancing the properties of photocatalysts. As reported, coupling semiconductors with metals is one of the most effective methods to achieve high-performance photocatalysts. The excellent properties of metal/semiconductor (M/S) nanocomposite photocatalysts originate in two aspects: (i) improved charge separation at the metal-semiconductor interface; and (ii) increased absorption of visible light due to the surface plasmon resonance of metals. So far, many M/S nanocomposite photocatalysts with different structures have been developed for the application in environmental remediation, selective organic transformation, hydrogen evolution, and disinfection. Herein, we will give a review on the M/S nanocomposite photocatalysts, regarding their fundamentals, structures (as well as their typical synthetic approaches), applications and properties. Finally, we will also present our perspective on the future development of M/S nanocomposite photocatalysts.

Gold/Periodic Mesoporous Organosilicas with Controllable Mesostructure by Using Compressed CO2

Gold nanoparticles confined into the walls of periodic mesoporous organosilicas (PMOs) with controllable morphology have been successfully fabricated through a one-pot method by using different CO₂ pressures. The synthesis can be easily conducted in a mixed aqueous solution by using HAuCl₄ as gold source and bis[3-(triethoxysilyl)propyl] tetrasulfide and tetramethoxysilane as the organosilica precursor. P123 and compressed CO₂ served as the template and catalytic/regulative agent, respectively. Transmission electron microscopy, N₂ adsorption, and X-ray diffraction were employed to characterize the structure of the obtained composite materials. To further investigate the formation mechanism, a series of ordered PMOs with one-dimensional nanotube, two-dimensional hexagonal, vesicle-like, and cellular foam structures were obtained by using different CO₂ pressures without the gold source. The mechanism for mesostructure evolution of PMOs with different CO₂ pressures was proposed and discussed in detail. The catalytic performance of Au-based PMOs was evaluated for the reduction of 4-nitrophenol (4-NP). These obtained composites with different mesostructures not only exhibit excellent catalytic activity, high conversion rate, and remarkable thermal stability, but they also exhibit morphology-dependent reaction properties in the reduction of 4-NP. The possible reaction pathway of the reactants to embedded Au active sites was proposed and schemed.

Localized Surface Plasmon Resonance in Semiconductor Nanocrystals

Localized surface plasmon resonance (LSPR) in semiconductor nanocrystals (NCs) that results in resonant absorption, scattering, and near field enhancement around the NC can be tuned across a wide optical spectral range from visible to far-infrared by synthetically varying doping level, and post synthetically via chemical oxidation and reduction, photochemical control, and electrochemical control. In this review, we will discuss the fundamental electromagnetic dynamics governing light matter interaction in plasmonic semiconductor NCs and the realization of various distinctive physical properties made possible by the advancement of colloidal synthesis routes to such NCs. Here, we will illustrate how free carrier dielectric properties are induced in various semiconductor materials including metal oxides, metal chalcogenides, metal nitrides, silicon, and other materials. We will highlight the applicability and limitations of the Drude model as applied to semiconductors considering the complex band structures and crystal structures that predominate and quantum effects that emerge at nonclassical sizes. We will also emphasize the impact of dopant hybridization with bands of the host lattice as well as the interplay of shape and crystal structure in determining the LSPR characteristics of semiconductor NCs. To illustrate the discussion regarding both physical and synthetic aspects of LSPR-active NCs, we will focus on metal oxides with substantial consideration also of copper chalcogenide NCs, with select examples drawn from the literature on other doped semiconductor materials. Furthermore, we will discuss the promise that LSPR in doped semiconductor NCs holds for a wide range of applications such as infrared spectroscopy, energy-saving technologies like smart windows and waste heat management, biomedical applications including therapy and imaging, and optical applications like two photon upconversion, enhanced luminesence, and infrared metasurfaces.

First-principles investigation on Au n @(ZnO)42 (n = 6-16) core-shell nanoparticles: structure stability and catalytic activity

A family of Au _n @(ZnO)[Formula: see text] ([Formula: see text]-16) cluster-assembled nanoparticles are studied by density-functional theory calculations. Different sizes, up to 100 atoms, are considered for several compositions. For each n, we design and construct a converged model for Au _n @(ZnO)[Formula: see text] to analyze the coupling effect of adding Au atoms into ZnO outer shell. Among the optimized geometrical structures, we find that [Formula: see text]@(ZnO)[Formula: see text] has the most stable structure. The electronic properties, optical properties and catalytic activity of the [Formula: see text]@(ZnO)[Formula: see text] core-shell have been systematically investigated, which also shows consistency with the experimental results. It is found that forming a core-shell structure enhances the visible-light photocatalytic ability and [Formula: see text]@(ZnO)[Formula: see text] core-shell structure has a high catalytic efficiency for the reaction CO oxidation.

One-Pot Synthesis of Noble Metal/Zinc Oxide Composites with Controllable Morphology and High Catalytic Performance

The combination of noble metal and oxide support is a good approach to reduce the cost of noble metal catalyst and improve the stability of nanocatalyst in chemical reactions. Here, noble metal/zinc oxide composites, including Pd/ZnO and Pt/ZnO, have been facilely prepared through the general one-pot hydrothermal method. Importantly, the morphology of composites can be tuned from tube, flower, and star to skin needling-like shapes by easily adjusting the alkalinity of the reaction solution. By investigating the growth mechanism and influencing factors of the morphology of noble metal/zinc oxide composites, the differences of the morphology of composites can be ascribed to various growing units and directions of ZnO crystal under different alkalinities. Among them, Pd/ZnO composites exhibited both higher catalytic activity and excellent stability in the Suzuki coupling reaction between iodobenzene and phenylboronic acid and the reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride. Such supported composites will potentially be used as green and sustainable catalysts for many chemical reactions.

An unconventional outer-to-inner synthesis strategy for core (Au)-shell nanostructures with photo-electrochemical enhancement

In this work, an outer-to-inner strategy is demonstrated to simultaneously fabricate core-shell NPs and assemble them onto a scaffold. Specifically, the shell material is deposited onto the scaffold first, and then a layer of the core material (Au) is covered on the shell surface. Finally, the core (Au)-shell nanoparticles (NPs) are formed on the scaffold after annealing. As examples, Au-Bi₂S₃, Au-CdS and Au-CdSe core-shell NPs are grown on the surface of ZnO nanorods (NRs) via this strategy and exhibit enhanced photoelectrochemical (PEC) efficiency. The enhanced PEC performance is ascribed to improved light absorption induced by the plasmonic effect, trapped electrons of Au NPs, and cascade band alignment of the shell material and ZnO. The synthetic method gives a universal route to the development of nanodevices with assembled core-shell NPs. The core-shell NPs in the current study possess significant potential as building blocks for future PEC anodes or other solar conversion systems.

Adjusting the proportions of {0001} facets and high-index facets of ZnO hexagonal prisms and their photocatalytic activity

ZnO hexagonal prisms with different proportions of {0001} facets and high-index facets were synthesized by a hydrothermal method. The proportion of {0001} facets and high-index facets was controlled by changing the amount of PEG.

Conjugated assembly of colloidal zinc oxide quantum dots and multiwalled carbon nanotubes for an excellent photosensitive ultraviolet photodetector

Conjugation of highly dense colloidal zinc oxide quantum dots (ZnO QDs) on multiwalled carbon nanotubes (ZnO QDs@MWCNTs) is achieved for high performance ultraviolet (UV) photodetection. Significant improvement in the photoresponse of the ZnO QDs@MWCNTs photodetector (PD) is established as compared to a pristine ZnO QDs PD. The conjugation of two constituents allows the direct transfer of photoinduced charge carriers in ZnO QDs to MWCNTs for an efficient electrical path that considerably reduces charge recombination during UV exposure. Linearity in the response current with both the UV illumination intensity as well as external bias voltage reveals the photoelastic behavior of the ZnO QDs@MWCNTs PD. Moreover, the PD displays faster response and recovery times of 1.6 s and 1.9 s, respectively, than the most conventional PDs. In addition, spectral photoresponse analysis of the PD presents visible-blind behavior. Overall, conjugation of the hybrid heterostructure presented excellent photoelastic, high performance and visible-blind UV photodetection.

Full Solution-Processed Synthesis and Mechanisms of a Recyclable and Bifunctional Au/ZnO Plasmonic Platform for Enhanced UV/Vis Photocatalysis and Optical Properties

The synthesis of noble metal/semiconductor hybrid nanostructures for enhanced catalytic or superior optical properties has attracted a lot of attention in recent years. In this study, a facile and all-solution-processed synthetic route was employed to demonstrate an Au/ZnO platform with plasmonic-enhanced UV/Vis catalytic properties while retaining strengthened luminescent properties. The visible-light response of photocatalysis is supported by localized surface plasmon resonance (LSPR) excitations while the enhanced performance under UV is aided by charge separation and strong absorption. The enhancement in optical properties is mainly due to local field enhancement effect and coupling between exciton and LSPR. Luminescent characteristics are investigated and discussed in detail. Recyclability tests showed that the Au/ZnO substrate is reusable by cleaning and has a long shelf life. Our result suggests that plasmonic enhancement of photocatalytic performance is not necessarily a trade-off for enhanced near-band-edge emission in Au/ZnO. This approach may give rise to a new class of versatile platforms for use in novel multifunctional and integrated devices.

Black-colored ZnO nanowires with enhanced photocatalytic hydrogen evolution

Black-colored ZnO nanowires have been prepared in a metal-organic chemical vapor deposition system by employing a relatively low growth temperature and oxygen-deficient conditions. X-ray photoelectron spectroscopy reveals the incorporation of carbon into the nanowires. The photocatalytic hydrogen evolution activity of the black-colored ZnO nanowires is over 2.5 times larger than that of the pristine ZnO nanowires under simulated solar illumination conditions, and the enhanced photocatalytic activity can be attributed to the higher absorption of visible light by the black color and better carrier separation at the ZnO/carbon interface.