APTS and rGO co-functionalized pyrenated fluorescent nanonets for representative vapor phase nitroaromatic explosive detection

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

Trace Explosive Detection Based on Photonic Crystal Amplified Fluorescence

With increasing demand for public security and environmental protection, it is highly desirable to develop strategies to identify trace explosives (e. g., 2,4,6-trinitrotoluene (TNT)). Herein, we report novel photonic crystal (PC)-based sensor chips for trace TNT detection by using amplification effect of PCs on fluorescence (FL) signals. The sensor chips are constructed by integrating silica nanoparticles (NPs) modified with (3-aminopropyl)triethoxysilane (APTES) and fluorescein isothiocyanate isomer (FITC) and PC substrates. The amino groups on FITC-APTES-silica NPs can specifically bind with TNT molecules to form Meisenheimer complexes and strongly quench the FL signal of neighboring fluorophores FITC through Förster resonance energy transfer. PCs with matched PBG can amplify the FL signal of FITC-APTES-silica NPs about 24.4-fold and significantly improve sensitivity and resolution of trace TNT detection with the limit of detection of 0.23 nM. The PC-based sensor chips are stable, sensitive, and reliable TNT sensing platforms, showing great potential in homeland safety and environmental protection.

A Sustainable Approach for Graphene Oxide-supported Metal N-Heterocyclic Carbenes Catalysts

Sustainable noble metal-N-heterocyclic carbenes (NHC's) are a topic of arising concern in both the chemical industry and the academic community due to a growing consciousness of environmental pollution and scarcity. Recovering and reusing homogeneous catalysts from the reaction mixture requires a tremendous amount of capital investment in the chemical manufacturing industry. Heterogeneous catalysts are proved to have better functional groups tolerance; however, catalysts support largely influences the active catalyst sites to affect catalyst efficiency and selectivity. Thus the, choice of catalyst supports plays an almost decisive role in this emerging area of catalysis research. Graphene oxide (GO)/reduced graphene oxide (rGO) support has a potential growth in heterogeneous catalysis owing to their commercial availability, considerably larger surface area, inert towards chemical transformations, and easy surface functionalization to attached metal complexes via covalent and non-covalent aromatic π-conjugates. To take advantage of two independently well-established research areas of noble metal-N-heterocyclic carbenes and GO/rGO support via covalent or non-covalent interactions approach would offer novel heterogeneous complexes with improved catalytic efficiency without sacrificing product selectivity. This unique concept of marrying metal-N-heterocyclic carbenes with GO/rGO support has potential growth in the chemical and pharmaceutical industry, however, limited examples are reported in the literature. In this perspective, a comprehensive summary of metal-NHC synthesis on GO/rGO support and synthetic strategies to graft M-NHC onto GO/rGO surface, catalytic efficiency, for the catalytic transformation are critically reviewed. Furthermore, a plausible mechanism for non-covalent grafting methodology is summarized to direct readers to give a better understanding of M-NHC@rGO complexes. This would also allow the designing of engineered catalysts for unexplored catalytic applications.

One-Step Instantaneous Detection of Multiple Military and Improvised Explosives Facilitated by Colorimetric Reagent Design

Although colorimetric detection based on reagents has been widely used in the fields of practical trace analysis, its versatility for detecting multitargets remains the most challenging problem. As a proof of concept, a general colorimetric reagent based on potassium isopropanol (C₃H₇KO) and dimethyl sulfoxide for one-step instantaneous detection and discrimination of typical military and improvised explosives was designed. Vivid colors from none to purple red, blue green, yellow green, and green were shown, respectively, when detecting 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), elemental sulfur (S), and potassium permanganate (KMnO₄). The unique design including the specific nucleophilic addition reaction and the base-catalyzed oxidation-induced electron transfer ensures perfect selectivity even upon facing more than 20 interferents. It is further experimentally demonstrated that the confinement effect introduced by Tween-20 plays an essential role in enhancing the color signal on the surface and thus boosts the detection performance even with a mass as low as 1.45 ng. The applicability of this versatile colorimetric reagent was further verified by integrating the reagent onto paper strips for the in-field identification of TNT, DNT, S, and KMnO₄ with the help of a portable smartphone-based microscope apparatus, and a practical detection mass of 10.3 ng could be realized. We expect the present colorimetric reagent design strategy would pave a way for one-step instantaneous visual detection toward trace multianalytes.

Qualitative Detection Toward Military and Improvised Explosive Vapors by a Facile TiO2 Nanosheet-Based Chemiresistive Sensor Array

A facile TiO₂ nanosheets-based chemiresistive gas sensor array was prepared to identify 11 kinds of military and improvised explosive vapors at room temperature. The morphology of TiO₂ nanosheets was well-controlled by adjusting the concentration of HF applied during the preparation. Owing to the morphology difference, the TiO₂ nanosheet-based sensors show different response values toward 11 kinds of explosives, which is the basis of the successful discriminative identification. This method owes lots of advantages over other detection techniques, such as the facile preparation procedure, high response value (115.6% for TNT and 830% for PNT) at room temperature, rapid identifying properties (within 30 s for 9 explosives), simple operation, high anti-interference property, and low probability of misinforming, and consequently has a huge potential application in the qualitative detection of explosives.

Nanostructured Graphene Oxide Dots: Synthesis, Characterization, Photoinduced Electron Transfer Studies, and Detection of Explosives/Biomolecules

Herein, we report the preparation of graphene oxide dots (GO dots) by fine-tuning the carbonization degree of citric acid. The structure of GO dots was characterized by absorption spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, as well as high-resolution scanning electron microscopy and transmission electron microscopy analyses. The typical particle size of the GO dots was 42 nm. The fluorescent characteristics of the GO dots were analyzed by fluorescence spectroscopy. Once excited at 360 nm, the GO dots were fluorescent in the range of 450-550 nm, which was dependent on the excitation wavelength. Further, GO dots were effectively utilized for multifarious applications such as photoinduced electron transfer and detection of explosives and biomolecules. The emission property of GO dots was competently quenched by viologens, picric acid (PA), and bilirubin (BR). The mechanism of quenching by viologens and explosives/biomolecules was found to be due to photoinduced electron transfer and the internal filter effect, respectively. Intriguingly, the detection minimum of PA is in the nanomolar level. Toward commercialization, the economic test strips have also been introduced for the identification of PA. Furthermore, the GO dots have been applied as an efficient luminescent bioprobe for a selective and perceptive finding of BR.

Artificial Olfactory System for Trace Identification of Explosive Vapors Realized by Optoelectronic Schottky Sensing

A rapid, ultrasensitive artificial olfactory system based on an individual optoelectronic Schottky junction is demonstrated for the discriminative detection of explosive vapors, including military explosives and improvised explosives.

Development of luminescent sensors based on transition metal complexes for the detection of nitroexplosives

The detection of nitro explosives by transition metal complexes/metallosupramolecules with their designs and sensing mechanisms are comprehensively reviewed.

Photophysical Diversity of Water-Soluble Fluorescent Conjugated Polymers Induced by Surfactant Stabilizers for Rapid and Highly Selective Determination of 2,4,6-Trinitrotoluene Traces

The increasing application of fluorescence spectroscopy in development of reliable sensing platforms has triggered a lot of research interest for the synthesis of advanced fluorescent materials. Herein, we report a simple, low-cost strategy for the synthesis of a series of water-soluble conjugated polymer nanoparticles with diverse emission range using cationic (hexadecyltrimethylammonium bromide, CTAB), anionic (sodium dodecylbenzenesulfonate, SDBS), and nonionic (TX114) surfactants as the stabilizing agents. The role of surfactant type on the photophisical and sensing properties of resultant polymers has been investigated using dynamic light scattering (DLS), FT-IR, UV-vis, fluorescence, and energy dispersive X-ray (EDS) spectroscopies. The results show that the surface polarity, size, and spectroscopic and sensing properties of conjugated polymers could be well controlled by the proper selection of the stabilizer type. The fluorescent conjugated polymers exhibited fluorescence quenching toward nitroaromatic compounds. Further studies on the fluorescence properties of conjugated polymers revealed that the emission of the SDBS stabilized polymer, N-methylpolypyrrole-SDBS (NMPPY-SDBS), is strongly quenched by 2,4,6-trinitrotoluene molecule with a large Stern -Volmer constant of 59 526 M(-1) and an excellent detection limit of 100 nM. UV-vis and cyclic voltammetry measurements unveiled that fluorescence quenching occurs through a charge transfer mechanism between electron rich NMPPY-SDBS and electron deficient 2,4,6-trinitrotoluene molecules. Finally, the as-prepared conjugated polymer and approach were successfully applied to the determination of 2,4,6-trinitrotoluene in real water samples.

Ultrasensitive, Real-time and Discriminative Detection of Improvised Explosives by Chemiresistive Thin-film Sensory Array of Mn(2+) Tailored Hierarchical ZnS

A simple method combing Mn²⁺ doping with a hierarchical structure was developed for the improvement of thin-film sensors and efficient detection of the explosives relevant to improvised explosive devices (IEDs). ZnS hierarchical nanospheres (HNs) were prepared via a solution-based route and their sensing performances were manipulated by Mn²⁺ doping. The responses of the sensors based on ZnS HNs towards 8 explosives generally increase firstly and then decrease with the increase of the doped Mn²⁺ concentration, reaching the climate at 5% Mn²⁺. Furthermore, the sensory array based on ZnS HNs with different doping levels achieved the sensitive and discriminative detection of 6 analytes relevant to IEDs and 2 military explosives in less than 5 s at room temperature. Importantly, the superior sensing performances make ZnS HNs material interesting in the field of chemiresistive sensors, and this simple method could be a very promising strategy to put the sensors based on thin-films of one-dimensional (1D) nanostructures into practical IEDs detection.

A F-ion assisted preparation route to improve the photodegradation performance of a TiO2@rGO system-how to efficiently utilize the photogenerated electrons in the target organic pollutants

F-doped TiO₂ densely and uniformly decorated on rGO sheets could adsorb more RhB on TiO₂ and efficiently utilize the photogenerated electrons of excited RhB to improve the photodegradation efficiency.

Molecular versus exciton diffusion in fluorescence-based explosive vapour sensors

The diffusion of p-nitrotoluene vapours into polymer or dendrimer sensing films follows Super Case II dynamics in which the quenching efficiency is strongly correlated to an accelerating analyte front propagating through the neat film rather than being reliant on exciton diffusion.

Highly Fluorescent Pyrene-Functional Polystyrene Copolymer Nanofibers for Enhanced Sensing Performance of TNT

A pyrene-functional polystyrene copolymer was prepared via 1,3-dipolar cycloaddition reaction (Sharpless-type click recation) between azide-functional styrene copolymer and 1-ethynylpyrene. Subsequently, nanofibers of pyrene-functional polystyrene copolymer were obtained by using electrospinning technique. The nanofibers thus obtained, found to preserve their parent fluorescence nature, confirmed the avoidance of aggregation during fiber formation. The trace detection of trinitrotoluene (TNT) in water with a detection limit of 5 nM was demonstrated, which is much lower than the maximum allowable limit set by the U.S. Environmental Protection Agency. Interestingly, the sensing performance was found to be selective toward TNT in water, even in the presence of higher concentrations of toxic metal pollutants such as Cd(2+), Co(2+), Cu(2+), and Hg(2+). The enhanced sensing performance was found to be due to the enlarged contact area and intrinsic nanoporous fiber morphology. Effortlessly, the visual colorimetric sensing performance can be seen by naked eye with a color change in a response time of few seconds. Furthermore, vapor-phase detection of TNT was studied, and the results are discussed herein. In terms of practical application, electrospun nanofibrous web of pyrene-functional polystyrene copolymer has various salient features including flexibility, reproducibility, and ease of use, and visual outputs increase their value and add to their advantage.

Fluorescence based explosive detection: from mechanisms to sensory materials

The detection of explosives is one of the current pressing concerns in global security. In the past few decades, a large number of emissive sensing materials have been developed for the detection of explosives in vapor, solution, and solid states through fluorescence methods. In recent years, great efforts have been devoted to develop new fluorescent materials with various sensing mechanisms for detecting explosives in order to achieve super-sensitivity, ultra-selectivity, as well as fast response time. This review article starts with a brief introduction on various sensing mechanisms for fluorescence based explosive detection, and then summarizes in an exhaustive and systematic way the state-of-the-art of fluorescent materials for explosive detection with a focus on the research in the recent 5 years. A wide range of fluorescent materials, such as conjugated polymers, small fluorophores, supramolecular systems, bio-inspired materials and aggregation induced emission-active materials, and their sensing performance and sensing mechanism are the centerpiece of this review. Finally, conclusions and future outlook are presented and discussed.

Numerical Modeling and Experimental Validation by Calorimetric Detection of Energetic Materials Using Thermal Bimorph Microcantilever Array: A Case Study on Sensing Vapors of Volatile Organic Compounds (VOCs)

Bi-layer (Au-Si₃N₄) microcantilevers fabricated in an array were used to detect vapors of energetic materials such as explosives under ambient conditions. The changes in the bending response of each thermal bimorph (i.e., microcantilever) with changes in actuation currents were experimentally monitored by measuring the angle of the reflected ray from a laser source used to illuminate the gold nanocoating on the surface of silicon nitride microcantilevers in the absence and presence of a designated combustible species. Experiments were performed to determine the signature response of this nano-calorimeter platform for each explosive material considered for this study. Numerical modeling was performed to predict the bending response of the microcantilevers for various explosive materials, species concentrations, and actuation currents. The experimental validation of the numerical predictions demonstrated that in the presence of different explosive or combustible materials, the microcantilevers exhibited unique trends in their bending responses with increasing values of the actuation current.

Highly selective detection of trinitrophenol by luminescent functionalized reduced graphene oxide through FRET mechanism

Among different nitro compounds, trinitrophenol (TNP) is the most common constituent to prepare powerful explosives all over the world. A few works on the detection of nitro explosives have already been reported in the past few years; however, selectivity is still in its infant stage. As all the nitroexplosives are highly electron deficient in nature, it is very difficult to separate one from a mixture of different nitro compounds by the usual photoinduced electron transfer (PET) mechanism. In the present work, we have used a bright luminescent, 2,6-diamino pyridine functionalized graphene oxide (DAP-RGO) for selective detection of TNP in the presence of other nitro compounds. The major advantage of using this material over other reported materials is not only to achieve very high fluorescence quenching of ∼96% but also superior selectivity >80% in the detection of TNP in aqueous medium via both fluorescence resonance energy transfer and PET mechanisms. Density functional theory calculations also suggest the occurrence of an effective proton transfer mechanism from TNP to DAP-RGO, resulting in this tremendous fluorescence quenching compared to other nitro compounds. We believe this graphene based composite will emerge a new class of materials that could be potentially useful for selective detection, even for trace amounts of nitro explosives in water.