Development of Thixotropic Molecular Oleogels Comprising Alkylanilide Gelators by Using a Mixing Strategy

Molecular oleogels have the potential to be used as materials in healthcare applications. However, their design and synthesis are complex, thus requiring simple and effective methods for their preparation. This paper reports on alkylanilides that are low molecular-weight organogelators, which when appropriately mixed with different alkyl chain lengths could result in the formation of mixed molecular gels that exhibit excellent gel-forming ability and mechanical properties. In addition, the single and mixed molecular organogel systems were found to be applicable as single and mixed molecular oleogel systems capable of gelling oils such as olive oil and squalane. This has been found to be true, especially in molecular oleogel systems consisting of squalane, which is used as solvents in healthcare. The mixed squalene-molecular oleogel systems showed an increase in the critical (minimum) gelation concentration from 1.0 to 0.1 wt.% in the single system and an improvement in the thixotropic behavior recovery time. The thixotropic behavior of the molecular oleogels in the mixed system was quantitatively evaluated through dynamic viscoelasticity measurements; however, it was not observed for the single-system molecular oleogels. Scanning electron microscopy of the xerogels suggested that this behavior is related to the qualitative improvement of the network owing to the refinement of the mesh structure. These mixed molecular oleogels, composed of alkylanilides displaying such thixotropic behavior, could be used as candidates for ointment-base materials in the healthcare field.

Multistimuli-Responsive Fluorescent Organogelator Based on Triphenylamine-Substituted Acylhydrazone Derivative

A new triphenylamine-based acylhydrazone derivative (TPAH-B8) was synthesized. TPAH-B8 could form organogels in cyclohexane through ultrasonic treatment. A typical gelation-induced fluorescence enhancement property was observed, which was attributed to the formation of J-aggregate in the gel state. More interestingly, TPAH-B8 exhibited multistimuli responsive behaviors. First, TPAH-B8 showed a solvatochromic effect, with the emission color changing from blue to cyan with the change in solvent from nonpolar cyclohexane to polar dimethyl sulfoxide (DMSO). Second, TPAH-B8 showed a reversible mechanofluorochromism. The xerogel of TPAH-B8 emitted a blue fluorescence, while the fluorescence color changed to cyan after grinding. The cyan and blue colors could be repeated with the treatment of grinding and annealing, which was explored and ascribed to the transformation between crystalline and amorphous states. Third, TPAH-B8 revealed acidochromic property. The fluorescence color of TPAH-B8 in organogel and solid states could be switched by trifluoroacetic acid (TFA)/triethylamine (TEA). This work not only demonstrated the multistimuli-responsive fluorescent properties of TPAH-B8 but also offered an easy way to develop new kinds of multistimuli-responsive fluorescent materials.

Dicyclohexylurea derivatives of amino acids as dye absorbent organogels and anion sensors

Dicyclohexyl urea (DCU) derivatives of amino acids Fmoc-Phe-DCU (M1), Fmoc-Phg-DCU (M2) and Fmoc-Gaba-DCU (M3) have been shown to form phase selective, thermoreversible and mechanically robust gels in a large range of organic solvents. This is the first report of low molecular weight gelators (LMWG) from DCU derivatives of amino acids. The self-assembly mechanism of the organogels has been probed using concentration dependent 1H NMR, DMSO titration 1H NMR, fluorescence, FTIR, PXRD and FESEM techniques. Self-assembly leading to gelation process is mainly driven by hydrophobicity and π-π stacking interactions in between Fmoc groups. Interestingly, the gels can absorb several kinds of organic dyes efficiently and can be reused for dye absorption for multiple cycles. Additionally, M1-M3 act as sensors for anions like fluoride, acetate and hydroxide, for which they have specific fluorescence response. Gel formation by M1-M3 is completely arrested in the presence of fluoride. The possible binding mode of fluoride has been delineated using DFT studies. Calculations suggest, involvement of urea NH in a six membered intramolecular hydrogen bond, rendering it unavailable for fluoride binding. Backbone -NH of the amino acids of M1-M3 is responsible for fluoride binding. The reported small, economically viable, synthetically facile molecules not only enrich the repertoire of LMWG molecules, but can have multifaceted applications.

Self-Assembled α-Cyanostilbenes for Advanced Functional Materials

In the specific context of condensed media, the significant and increasing recent interest in the α-cyanostilbene (CS) motif [ArCHC(CN)Ar] is relevant. These compounds have shown remarkable optical features in addition to interesting electrical properties, and hence they are recognized as very suitable and versatile options for the development of functional materials. This progress report is focused on current and future use of CS structures and molecular assemblies with the aim of exploring and developing for the next generations of functional materials. A critical selection of illustrative materials that contain the CS motif, including relevant subfamilies such as the dicyanodistyrylbenzene and 2,3,3-triphenylacrylonitrile shows how, driven by the self-assembly of CS blocks, a variety of properties, effects, and possibilities for practical applications can be offered to the scientific community, through different rational routes for the elaboration of advanced materials. A survey is provided on the research efforts directed toward promoting the self-assembly of the solid state (polycrystalline solids, thin films, and single crystals), liquid crystals, nanostructures, and gels with multistimuli responsiveness, and applications for sensors, organic light-emitting diodes, organic field effect transistors, organic lasers, solar cells, or bioimaging purposes.

Diarylethene-based xerogels: the fabrication of more entangled networks driven by isomerization and acidofluorochromism

The organogels were formed from fully-conjugated styrylbenzoxazoles and styrylbenzothiazoles without traditional gelation groups.

A bis-naphthalimide functionalized pillar[5]arene-based supramolecular π-gel acts as a multi-stimuli-responsive material

A novel approach for the design of multi-stimuli-responsive supramolecular functional materials was successfully developed by introducing the competition of π–π stacking and cation–π interactions into a pillar[5]arene-based supramolecular π-gel (MP5-G).

Carbazole modified salicylaldimines and their difluoroboron complexes: effect of the tert-butyl and trifluoromethyl terminal groups on organogelation and piezofluorochromism

Luminescent nanofibers were generated from nontraditional π-gelators based on salicylaldimines and their difluoroboron complex bearing tert-butyl carbazole and trifluoromethylbenzene.

Multi-color solid-state emission of β-iminoenolate boron complexes tuned by methoxyl groups: aggregation-induced emission and mechanofluorochromism

New β-iminoenolate boron complexes bearing benzoxazole were synthesized, and they exhibited strong luminescence in solid states.

Long-chain alkylamide-derived oil gels: mixing induced onset of thixotropy and application in sustained drug release

Oil gels composed of long-chain alkylamides exhibited thixotropic properties, although the same property was absent in each alkylamide.

Emission enhanced two-component gels for the detection of organic amine vapors

A two-component gelator with enhanced emission could be used to quantitatively detect and discriminate between aliphatic and aromatic organic amine vapors.

Nanofibers of hydrogen-bonded two-component gel with closely connected p- and n-channels and photoinduced electron transfer

An D-A-D gelator (DTCQ) was designed and synthesized using 2,3-dimethyl-5,8-di(thiophen-2-yl)quinoxaline and N-alkyl 3-aminocarbazole units as acceptor and donor, respectively, which were linked by a single bond. The compound could gelate several solvents, such as benzyl alcohol, aniline, acetophenone, and o-dichlorobenzene, as well as self-assemble into one-dimensional (1D) nanofibers in gel phase. The absorption and infrared spectra of the gels indicated that π-π interactions between aromatic moieties, intermolecular hydrogen bonds between amide units, and van der Waals forces were the driving forces for the formation of 1D self-assemblies and gel. DTCQ gel was red and emits red fluorescence because it has a strong absorption band at 487 nm and an emissive band at 620 nm. Moreover, DTCQ and a fullerene carboxylic acid formed two-component gel, in which the two compounds developed a hydrogen bond complex and self-assembled into 1D nanofibers with closely connected p- and n-channels. The nanofibrous xerogel film can rapidly generate a photocurrent under visible-light radiation through electron transfer from the gelator to fullerene, and then, the excellent exciton separation and charge transfer to two electrodes.

Multistimuli responsive organogels based on a reactive azobenzene gelator

A reactive azobenzene based super organogelator was found to rapidly and reversibly transform a range of hydrophobic solvents from gels to solutions upon changes in temperature, light and shear force. More specifically they formed gels at concentrations as low as 0.08 wt%. Upon heating, exposure to UV light, or application of shear, the π-π bonding was disrupted which resulted in a rapid drop of both modulus and viscosity. This was confirmed by (1)H NMR, SAXS, and rheological measurements. Although many examples of organogelators are known in the literature, this is the first time that a reactive group, a benzoyl chloride, has been incorporated in a supramolecular organogel structure. Moreover, this group is available for subsequent synthetic modifications. The presence of benzoyl chloride groups showed a remarkable effect on the formation and properties of the gels. Compared with other approaches, this strategy is advantageous in terms of structural design since it not only produces a multi-responsive soft material but also allows facile modifications which may expand the applications of organogels to other fields.

A multistimuli-responsive photochromic metal-organic gel

A photochromic metal-organic gel with thermo-, photo-, and anion-responsive behavior is obtained. Unusually, heating of the Al-ligand solution leads to gel formation and cooling to room temperature reverses the process to reform the solution. The gel is sensitive to weakly coordinating anions. Additionally, reversible photochromic transformations take place both in the solution and gel states, accompanied by reversibly switched luminescence.

Wholly π-conjugated low-molecular-weight organogelator that displays triple-channel responses to fluoride ions

A novel salicylidene aniline-based wholly π-conjugated molecule that could be self-assembled into an organogel was synthesized. The rigid organogel collapsed into fluid solutions with significant changes in UV-vis absorption and fluorescence colors in response to fluoride ions. It was found that the hydroxyl group in the salicylidene aniline moiety played a key role not only in the gelation but also in fluoride ion responses.

N-Alkylamido-d-glucamine-based gelators for the generation of thixotropic gels

Hydrogels made from new gelators exhibit thixotropic properties, whereas hydrogels formed with structurally similar N-alkyl-d-glucamide have a tendency to crystallize.

Onset of mixing-induced thixotropy in hydrogels by mixing two homologues of low-molecular-weight hydrogelators

We determined the onset of thixotropy in hydrogels when two homologues of low-molecular-weight hydrogelators, N-alkyl-d-glucamides (CnNG), were mixed.

A new composite thixotropic hydrogel composed of a low-molecular-weight hydrogelator and a nanosheet

New composite comprised of low-molecular-weight hydrogelator and the nanosheet Laponite®, showed thixotropic behaviour.

Creation of a polymer backbone in lipid bilayer membrane-based nanotubes for morphological and microenvironmental stabilization

We report a novel method for morphological and microenvironmental stabilization of single-walled bilayer nanotubes, which involves construction of a polymer backbone between the monolayers by intercalating a monomer, followed by in situ polymerization.

Visual-size molecular recognition based on gels

Since their discovery, stimuli-responsive organogels have garnered considerable and increasing attention from a broad range of research fields. In consideration of an one-dimensional ordered relay in anisotropic phase, the assembled gel networks can amplify various properties of the functional moieties possessed by the gelator molecules. Recently, substantial efforts have been focused on the development of facile, straightforward, and low-cost molecular recognition approaches by using nanostructured gel matrices as visual sensing platforms. In this research news, the recent progresses in macroscopic or visual-size molecular recognition for a number of homologues, isomers, and anions, as well as extremely challenging chiral enantiomers, using polymer and molecular gels are reviewed. Several strategies--including guest molecular competition, hydrogen-bonding blocking, and metal-coordination--for visual discrimination are included. Finally, the future trends and potential application in facile visual-size molecular recognition based on organogel matrices are highlighted.