Unraveling the Mechanism and Kinetics of Binding of an LCI-eGFP-Polymer for Antifouling Coatings

The ability of proteins to adsorb irreversibly onto surfaces opens new possibilities to functionalize biological interfaces. Herein, the mechanism and kinetics of adsorption of protein-polymer macromolecules with the ability to equip surfaces with antifouling properties are investigated. These macromolecules consist of the liquid chromatography peak I peptide from which antifouling polymer brushes are grafted using single electron transfer-living radical polymerization. Surface plasmon resonance spectroscopy reveals an adsorption mechanism that follows a Langmuir-type of binding with a strong binding affinity to gold. X-ray reflectivity supports this by proving that the binding occurs exclusively by the peptide. However, the lateral organization at the surface is directed by the cylindrical eGFP. The antifouling functionality of the unimolecular coatings is confirmed by contact with blood plasma. All coatings reduce the fouling from blood plasma by 8894% with only minor effect of the degree of polymerization for the studied range (DP between 101 and 932). The excellent antifouling properties, combined with the ease of polymerization and the straightforward coating procedure make this a very promising antifouling concept for a multiplicity of applications.

Optimizing the Cu-RDRP ofN-(2-hydroxypropyl) methacrylamide toward biomedical applications

Aqueous Cu-RDRP ofN-(2-hydroxypropyl) methacrylamide was optimized to achieve co(polymers) of low dispersity and controlled molecular weight at high conversions.

Shell-Sheddable Poly(N-2-hydroxypropyl methacrylamide) Polymeric Micelles for Dual-Sensitive Release of Doxorubicin

Poly(ethylene glycol) (PEG) shell-sheddable micelles are proved to be effective tools for rapid intracellular drug delivery. However, some adverse factors, such as the potential immunogenicity and the accelerated blood clearance, might be accompanied with the traditional PEG sheddable micelles. Here, a poly(N-2-hydroxypropyl methacrylamide) (PHPMA) sheddable block copolymer containing disulfide bonds on the main chain is prepared to form pH- and reduction-dual-responsive micelles. The most optimal synthetic route of the block copolymer is selected from three potential pathways. Doxorubicin is loaded via an acid-labile hydrazone bond to achieve high drug loading content and to prevent premature drug release. As expected, as-prepared shell-sheddable micelles exhibit faster intracellular drug release and more satisfactory in vitro anticancer efficacy than the nonsheddable counterpart did. This design provides a feasible guideline for the efficient synthesis of similar shell-sheddable micelles consisting of PHPMA coatings.

Lipidated polymers for the stabilization of cubosomes: nanostructured drug delivery vehicles

Lipidated polymers, like their protein counterparts, may be useful in fields as diverse as biochemistry and drug delivery. As such, strategies for preparing lipidated polymers with defined molecular architecture are clearly warranted. Herein, we describe a broadly-applicable methodology for synthesizing such lipidated materials, and demonstrate how they can be applied to the preparation of nanostructured drug delivery vehicles.

SET-LRP in biphasic mixtures of fluorinated alcohols with water

Efficient and inexpensive SET-LRP in biphasic-mixtures of fluorinated alcohols with water.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

SET-LRP mediated by TREN in biphasic water–organic solvent mixtures provides the most economical and efficient process

Screening ligands and solvents for economical and efficient biphasic SET-LRP.

Grafting of functional methacrylate polymer brushes by photoinduced SET-LRP

The growth of polymer brushes from a variety of methacrylate monomers was accomplished using UV light as a polymerization trigger.

Cu(0)-mediated living radical polymerization: recent highlights and applications; a perspective

Cu(0)-mediated living radical polymerization or single electron transfer living radical polymerization (Cu(0)-mediated LRP or SET-LRP) is a versatile polymerization technique that has attracted considerable interest during the past few years for the facile preparation of advanced materials.

Aqueous SET-LRP catalyzed with “in situ” generated Cu(0) demonstrates surface mediated activation and bimolecular termination

Ultrafast, inversely temperature dependent aqueous SET-LRP with “in situ” generated Cu(0) yields quantitative chain-ends demonstrating surface mediated activation and termination.

Synthesis of well-defined α,ω-telechelic multiblock copolymers in aqueous medium: in situ generation of α,ω-diols

The synthesis of well-defined α,ω-dihydroxyl telechelic multiblock copolymers by sequential in situ chain extensions via aqueous Cu(0) mediated living radical polymerization (SET-LRP) is reported.

A rational approach to activated polyacrylates and polymethacrylates by using a combination of model reactions and SET-LRP of hexafluoroisopropyl acrylate and methacrylate

A new class of activated polyacrylates was elaborated by a combination of model reactions and SET-LRP of hexafluoroisopropyl acrylate and methacrylate.

Synthesis of non-fouling poly[N-(2-hydroxypropyl)methacrylamide] brushes by photoinduced SET-LRP

Surface-initiated photoinduced SET-LRP of N-(2-hydroxypropyl)methacrylamide from an initiator-containing monolayer yields micropatterned brushes resistant to blood plasma fouling.

Photo-patterning of non-fouling polymers and biomolecules on paper

Functional cellulose substrates with tetrazole moieties are generated to serve as universal platforms for the spatio-temporal immobilization of synthetic ultra-low fouling polymer brushes and protein species via a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC)-based protocol. Poly(carboxybetaine acrylamide) brushes are grafted from initiators photo-patterned by NITEC utilizing single electron transfer living radical polymerization. Streptavidin is photo-immobilized with remarkable efficiency, opening the possibility to generate new materials for biomedical and biosensing applications.

Self-activation and activation of Cu(0) wire for SET-LRP mediated by fluorinated alcohols

Herein we report the self-activation and activation of Cu(0) wire used to form a catalyst in single-electron transfer living radical polymerization (SET-LRP) in two fluorinated alcohols employed as solvents, 2,2,2-trifluoroethanol (TFE) and 2,2,3,3-tetrafluoropropanol (TFP).

Cu(0)-mediated polymerization of hydrophobic acrylates using high-throughput experimentation

In this paper the optimization of the Cu(0)-mediated polymerization of n-butyl acrylate and 2-methoxyethyl acrylate is reported using an automated parallel synthesizer.

Synthesis of high molar mass poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) by SET-LRP in mixtures of fluorinated alcohols with DMSO

SET-LRP of n-butyl acrylate (nBA) and 2-ethylhexyl acrylate (EHA) initiated with bis(2-bromopropionyl)ethane (BPE) to synthesize high molar mass poly(nBA) and poly(EHA) was carried out in binary mixtures of 2,2,2-trifluoroethanol (TFE) or 2,2,3,3-tetrafluoropropanol (TFP) with DMSO at 50 °C.

SET-LRP of semifluorinated acrylates and methacrylates

For the first time SET-LRP of 1H,1H,2H,2H-perfluorooctyl acrylate, 2,2,3,3,4,4,4-heptafluorobutyl acrylate, 1H,1H,5H-octafluoropentyl acrylate and 1H,1H,5H-octafluoropentyl methacrylate in 2,2,2-trifluoroethanol as the solvent at 25 °C for acrylates and at 50 °C for methacrylate was accomplished.