Straightforward synthesis of complex polymeric architectures with ultra-high chain density

Synthesis of complex polymeric architectures (CPAs) via reversible-deactivation radical polymerization (RDRP) currently relies on the rather inefficient attachment of monofunctional initiation/transfer sites onto CPA precursors. This drawback seriously limits the overall functionality of the resulting (macro)initiators and, consequently, also the total number of installable polymeric chains, which represents a significant bottleneck in the design of new polymeric materials. Here, we show that the (macro)initiator functionality can be substantially amplified by using trichloroacetyl isocyanate as a highly efficient vehicle for the rapid and clean introduction of trichloroacetyl groups (TAGs) into diverse precursors. Through extensive screening of polymerization conditions and comprehensive NMR and triple-detection SEC studies, we demonstrate that TAGs function as universal trifunctional initiators of copper-mediated RDRP of different monomer classes, affording low-dispersity polymers in a wide molecular weight range. We thus unlock access to a whole new group of ultra-high chain density CPAs previously inaccessible via simple RDRP protocols. We highlight new opportunities in CPA synthesis through numerous examples, including the de novo one-pot synthesis of a novel "star-on-star" CPA, the preparation of β-cyclodextrin-based 45-arm star polymers, and facile grafting from otherwise problematic cellulose substrates both in solution and from surface, obtaining effortlessly ultra-dense, ultra-high-molecular weight bottle-brush copolymers and thick spatially-controlled polymeric coatings, respectively.

Copper Nanodrugs with Controlled Morphologies through Aqueous Atom Transfer Radical Polymerization

Copper (Cu) nanodrugs can be facilely prepared through atom transfer radical polymerization (ATRP) in an aqueous medium. However, it is difficult to control the morphology of Cu nanodrugs and thereby optimize their anticancer activity. In this work, aqueous ATRP was combined with polymerization-induced self-assembly (PISA) to prepare Cu nanodrugs with various morphologies. We mapped the relationship between polymerization condition and product morphology in which each morphology shows a wide preparation window. Decreasing the reaction temperature and feeding more Cu catalysts can improve the mobility of chains, facilitating the morphology evolution from sphere to other high-order morphologies. The resultant Cu nanodrugs with high monomer conversion and high Cu loading efficiency could be easily taken by cancer cells, showing excellent anticancer efficacy in vitro. This work proposed a potential strategy to prepare Cu nanodrugs with a specific morphology in batches, providing the method to optimize the anticancer efficacy through morphology control.

Free-radical polymerization of 2-hydroxyethyl methacrylate (HEMA) supported by the high electric field

In macromolecular science, tunning basic polymer parameters, like molecular weight (Mn) or molecular weight distribution (dispersity, Đ), is an active research topic. Many prominent synthetic protocols concerning chemical modification of...

Functional pH-responsive polymers containing dynamic enaminone linkages for the release of active organic amines

Dynamic covalent bonds have attracted attention for the development of pH-responsive polymers, however, studies using acid-cleavable enaminone linkages as a means of controlled drug release have been limited. Herein, we...

100th Anniversary of Macromolecular Science Viewpoint: Achieving Ultrahigh Molecular Weights with Reversible Deactivation Radical Polymerization

Synthetic strategies for achieving ultrahigh molecular weights via reversible deactivation radical polymerization are discussed from the mechanistic, kinetic, and experimental aspects, and their applications as high-performance materials are highlighted. Further development of this field requires continuous effort to improve livingness and polymerization efficiency under greener conditions.

Enhanced Flocculation Efficiency in a High-Ionic-Strength Environment by the Aid of Anionic ABA Triblock Copolymers

The flocculation efficiency of polyelectrolytes in a high-ionic-strength environment is often affected and reduced due to shielding of the active ionizable functional groups, as well as changes in the surface chemistry of the solid slurry. To address this problem, a series of well-defined novel ABA triblock copolymers were employed for the flocculation of high-ionic-strength kaolin slurries at three different Ca²⁺ concentrations (0.05, 0.10, and 0.50 M). The primary focus was on the advancement in the polymer architecture, where the anionic functionalities were localized at the terminal ends. Typical commercial flocculants tend to have anionic functionalities randomly distributed throughout the polymer chain and hence a higher propensity toward condensed conformation and formation of insoluble species. In comparison to a control random copolymer, the ABA triblock copolymers were able to flocculate kaolin slurries to give faster settlement rates, particularly at the high Ca²⁺ concentrations of 0.10 and 0.50 M. In addition, these polymers had significantly better clarification ability at higher Ca²⁺ concentrations compared to the control random copolymer. The ABA triblock copolymer architecture may therefore have potential as a flocculant in high-ionic-strength applications.

Polyrotaxanes created by end-capping polypseudorotaxanes self-assembled from β-CDs with distal azide terminated PHEMA using propargylamine monosubstituted β-CDs

When a distal azide terminated PHEMA was allowed to self-assemble with varying amounts of β-CDs in water, followed by in situ reaction with PA-β-CDs via the CuAAC, linear polyrotaxanes (PRs) and a mixture of linear and hyperbranched PRs were obtained.

Polyacrylates Derived from Biobased Ethyl Lactate Solvent via SET-LRP

The precise synthesis of polymers derived from alkyl lactate ester acrylates is reported for the first time. Kinetic experiments were conducted to demonstrate that Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) in alcohols at 25 °C provides a green methodology for the LRP of this forgotten class of biobased monomers. The acrylic derivative of ethyl lactate (EL) solvent and homologous structures with methyl and n-butyl ester were polymerized with excellent control over molecular weight, molecular weight distribution, and chain-end functionality. Kinetics plots in conventional alcohols such as ethanol and methanol were first order in the monomer, with molecular weight increasing linearly with conversion. However, aqueous EL mixtures were found to be more suitable than pure EL to mediate the SET-LRP process. The near-quantitative monomer conversion and high bromine chain-end functionality, demonstrated by matrix-assisted laser desorption ionization time-of-flight analysis, further allowed the preparation of innovative biobased block copolymers containing rubbery poly(ethyl lactate acrylate) poly(ELA) sequences. For instance, the poly(ELA)- b-poly(glycerol acrylate) block copolymer self-assembled in water to form stable micelles with chiral lactic acid-derived block-forming micellar core as confirmed by the pyrene-probe-based fluorescence technique. Dynamic light scattering and transmission electron microscopy measurements revealed the nanosize spherical morphology for these biobased aggregates.

SET-LRP of Bio- and Petroleum-Sourced Methacrylates in Aqueous Alcoholic Mixtures

Single-electron transfer-living radical polymerization (SET-LRP) in "programmed" aqueous organic biphasic systems eliminates the judicious choice of solvent and also provides accelerated reaction rates. Herein, we report efforts to expand the monomer scope for these systems by targeting methacrylic monomers and polymers. Various environmentally friendly aqueous alcoholic mixtures were used in combination with Cu(0) wire catalyst, tris(2-dimethylaminoethyl)amine (Me₆-TREN) ligand, and p-toluenesulfonyl chloride (Ts-Cl) initiator to deliver well-defined polymethacrylates from methyl methacrylate, butyl methacrylate, and other monomers derived from biomass feedstock (e.g., lactic acid, isosorbide, furfural, and lauric acid). The effect of water on the nature of the reaction mixture during the SET-LRP process, reaction rate, and control of the polymerization is discussed. The control retained under the reported conditions is demonstrated by synthesizing polymers of different targeted molar mass as well as quasi-block AB copolymers by "in situ" chain extension at high conversion. These results highlight the capabilities of SET-LRP to provide sustainable solutions based on renewable resources.

Synthesis of chitosan-mimicking cationic glycopolymers by Cu(0)-LRP for efficient capture and killing of bacteria

A schematic representation of the preparation of cationic magnetic glyconanoparticles by Cu(0)-LRP to efficiently capture, kill and separate E. coli from water.

Cu(0)-RDRP of methacrylates in DMSO: importance of the initiator

The controlled radical polymerization of methacrylates via Cu(0)-mediated RDRP is challenging in comparison to acrylates with most reports illustrating higher dispersities, lower monomer conversions and poorer end group fidelity relative to the acrylic analogues.

Copper(0) Mediated Single Electron Transfer Controlled Radical Polymerization toward CF Bonds on Poly(vinylidene fluoride)

The first copper(0) mediated controlled radical polymerization (CRP) of methyl methacrylate (MMA) toward CF bonds onto poly(vinylidene fluoride) (PVDF) is reported with rather high activity. By avoiding the halogen exchange, Cu⁰ instead of Cu^I complexes utilized as catalyst is responsible for the significantly improved polymerization activity. Using FH decoupled nuclear magnetic resonance technique, the grafting sites onto PVDF are finely located. From this, detailed topologic information including the grafting density, average length of each side chain, along with the overall grafted content of PMMA, is detected by tracking the polymerization as a function of time. This work offers not only a facile CRP strategy based on inactive CF bonds but also a deep insight into the cleavage of F-bearing compounds in organic chemistry.

Integrated Nanoparticles To Synergistically Elevate Tumor Oxidative Stress and Suppress Antioxidative Capability for Amplified Oxidation Therapy

The improved antioxidant system of cancer cells renders them well-adaptive to the intrinsic oxidative stress in tumor tissues. On the other hand, cancer cells are more sensitive to elevated tumor oxidative stress as compared with normal cells due to their deficient reactive oxygen species-eliminating systems. Oxidation therapy of cancers refers to the strategy of killing cancer cells through selectively increasing the oxidative stress in tumor tissues. In this article, to amplify the oxidation therapy, we develop integrated nanoparticles with the properties to elevate tumor oxidative stress and concurrently suppress the antioxidative capability of cancer cells. The amphiphilic block copolymer micelles of poly(ethylene glycol)-b-poly[2-((((4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl)oxy)carbonyl)oxy)ethyl methacrylate] (PEG-b-PBEMA) are integrated with palmitoyl ascorbate (PA) to form hybrid micelles (PA-Micelle). PA molecules at pharmacologic concentrations serve as a prooxidant to upregulate the hydrogen peroxide (H₂O₂) level in tumor sites and the PBEMA segment exhibits H₂O₂-triggered release of quinone methide for glutathione depletion to suppress the antioxidative capability of cancer cells, which synergistically and selectively kill cancer cells for tumor growth suppression. Given the significantly low side toxicity against normal tissues, this novel integrated nanoparticle design represents a novel class of nanomedicine systems for high-efficiency oxidation therapy with the potentials to be translated to clinical applications.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

Synthesis of ultra-high molecular weight ABA triblock copolymers via aqueous RAFT-mediated gel polymerisation, end group modification and chain coupling

Novel ultra-high molecular weight ABA triblock copolymers were synthesised using aqueous RAFT polymerisation, end-group modification and chain coupling.

Cu(0)-mediated living radical polymerization: recent highlights and applications; a perspective

Cu(0)-mediated living radical polymerization or single electron transfer living radical polymerization (Cu(0)-mediated LRP or SET-LRP) is a versatile polymerization technique that has attracted considerable interest during the past few years for the facile preparation of advanced materials.

A synthetic route to ultra-high molecular weight polystyrene (>106) with narrow molecular weight distribution by emulsifier-free, emulsion organotellurium-mediated living radical polymerization (emulsion TERP)

We propose a route to synthesizing ultra-high molecular weight (>10⁶) polystyrene (PS) having a narrow molecular weight distribution by controlled/living radical polymerization.

A multiple-stage activation of the catalytically inhomogeneous Cu(0) wire used in SET-LRP

The surface of a Cu(0) wire used as a catalyst in SET-LRP is inhomogeneous since it contains a combination of Cu(111) and Cu(100) faces of the FCC unit cell whose ratio is dependent on the fabrication method. A method to activate this inhomogeneous Cu(0) wire for SET-LRP is reported.

The effect of ligand, solvent and Cu(0) source on the efficient polymerization of polyether acrylates and methacrylates in aqueous and organic media

The synthesis of well-defined telechelic polyacrylates and polymethacrylates in organic and aqueous media via Cu(0)-mediated reversible-deactivation radical polymerization is thoroughly investigated.

Cu(0)-mediated living radical polymerisation in dimethyl lactamide (DML); an unusual green solvent with limited environmental impact

The synthesis of poly-acrylates, methacrylates and styrene derivatives by SET-LRP is reported in a user and environmentally friendly “green” solvent, dimethyl lactamide (DML).

Insights into relevant mechanistic aspects about the induction period of Cu0/Me6TREN-mediated reversible-deactivation radical polymerization

The induction period and subsequent autoaccelerated polymerization of a Cu⁰/Me₆TREN-catalyzed system originate from the accumulation of soluble copper species.

Preparation of graphene/poly(2-hydroxyethyl acrylate) nanohybrid materials via an ambient temperature “grafting-from” strategy

PHEA polymer brushes were grownin situfrom the surface of graphene sheetsviaSET-LRP through a “grafting-from” strategy at ambient temperature to afford the PHEA/graphene hybrid material with excellent dispersibility in organic solvents.

Aqueous copper(0) mediated reversible deactivation radical polymerization of 2-hydroxyethyl acrylate

Lowering the concentration of adsorbed radicals on the Cu(0) surface, achieved by reducing catalyst and adding NaBr, is the key to the synthesis of well-defined P(HEA) without a high molecular weight shoulder in aqueous solution using two-step Cu(0) in situ mediation.

Rapid synthesis of ultrahigh molecular weight and low polydispersity polystyrene diblock copolymers by RAFT-mediated emulsion polymerization

An environmentally friendly emulsion technique produces uniform nanoparticles with precise control over molecular weight and particle size.