Bent naphthodithiophenes: synthesis and characterization of isomeric fluorophores

Thiophene-containing heteroarenes are one of the most well-known classes of π-conjugated building blocks for photoactive molecules. Isomeric naphthodithiophenes (NDTs) are at the forefront of this research area due to their straightforward synthesis and derivatization. Notably, NDT geometries that are bent - such as naphtho[2,1-b:3,4-b']dithiophene (α-NDT) and naphtho[1,2-b:4,3-b']dithiophene (β-NDT) - are seldom employed as photoactive small molecules. This report investigates how remote substituents impact the photophysical properties of isomeric α- and β-NDTs. The orientation of the thiophene units plays a critical role in the emission: in the α(OHex)R2 series conjugation from the end-caps to the NDT core is apparent, while in the β(Oi-Pent)R2 series minimal change is observed unless strong electron acceptors, such as β(Oi-Pent)(PhCF3)2, are employed. This push-pull acceptor-donor-acceptor (A-D-A) fluorophore exhibits positive fluorosolvatochromism that correlates with increasing solvent polarity parameter, E T(30). In total, these results highlight how remote substituents are able to modulate the emission of isomeric bent NDTs.

Iridium-Catalyzed [2 + 2 + 2] Cycloaddition of Bithiophen-Linked Diynes with Nitriles: Scope and Mechanistic Study with Quantum Chemical Calculation

We report a simple and atom-efficient method for the synthesis of bithiophene-fused isoquinolines by iridium-catalyzed [2 + 2 + 2] cycloaddition of bithiophene-linked diynes with nitriles. All three structural isomers of bithiophene-linked diynes underwent [2 + 2 + 2] cycloaddition, and the trend in the reactivity for cycloaddition was diyne 1 = diyne 3 > diyne 2. Dibenzothiophene-linked diyne also reacted with nitriles to form a variety of cycloadducts. Cycloaddition of bithiophene-linked diynes with alkynes and an isocyanate formed naphthodithiophenes and a 2-pyridone derivative, respectively. Cycloadducts bearing a 2-aminopyridine moiety and benzothiophene rings showed intense fluorescence at around 530 nm and gave a fluorescence quantum yield of 0.44. Furthermore, quantum chemical calculations provided insight into the origin of the difference in reactivity of three bithiophene-linked diynes. The different reactivities of the three diynes 1-3 are believed to originate from the step where an iridacyclopentadiene reacts with a coordinated nitrile to form azairidabicyclo[3.2.0]heptatriene. HOMOs of iridacyclopentadiene play a decisive role in this step.

Thiazole fused S,N-heteroacene step-ladder polymeric semiconductors for organic transistors

Ladder-type thiazole-fused S,N-heteroacenes with an extended π-conjugation consisting of six (SN6-Tz) and nine (SN9-Tz) fused aromatic rings have been synthesized and fully characterized. To date, the synthesis of well-defined fused building blocks and polymers of π-conjugated organic compounds based on the thiazole moiety is a considerable synthetic challenge, due to the difficulty in their synthesis. Acceptor-donor building blocks M1 and M2 were successfully polymerized into ladder homopolymers P1-P2 and further copolymerized with a diketopyrrolopyrrole unit to afford step-ladder copolymer P3. The optical, electronic, and thermal properties, in addition to their charge transport behavior in organic thin-film transistors (OTFTs), were investigated. The results showed an interesting effect on the molecular arrangement of the thiazole-based ladder-type heteroacene in the crystal structure revealing skewed π-π-stacking, and expected to possess better p-type semiconducting performance. The polymers all possess good molecular weights and excellent thermal properties. All the polymer-based OTFT devices exhibit annealing temperature dependent performance, and among the polymers P3 exhibits the highest mobility of 0.05 cm2 V-1 s-1.

Photophysical, Thermal and Structural Properties of Thiophene and Benzodithiophene-Based Copolymers Synthesized by Direct Arylation Polycondensation Method

Three low-band-gap copolymers based on isoindigo acceptor units were designed and successfully synthesized by direct arylation polycondensation method. Two of them were benzodithiophene (BDT)-isoindigo copolymers (PBDTI-OD and PBDTI-DT) with 2-octlydodecyl (OD) and 2-decyltetradecyl (DT) substituted isoindigo units, respectively. Thiophene donor and DT-substituted isoindigo acceptor units were copolymerized to synthesize PTI-DT. The copolymers have a broad absorption range that extends to over 760 nm with a band gap ≈1.5 eV. The photophysical property studies showed that the BDT-based copolymers have non-polar ground states. Their emission exhibited the population of the intramolecular charge transfer (ICT) state in polar solvents and tightly bound excitonic state in non-polar solvents due to self-aggregation. On the contrary, the emission from the thiophene-based copolymers was only from the tightly bound excitonic state. The thermal decomposition temperature of the copolymers was above 380 °C. The X-ray diffraction pattern of the three copolymers showed a halo due to π-π stacking. A second, sharper peak was observed in the BDT-based copolymer with a longer side chain on the isoindigo unit (PBDTI-DT), and the thiophene-based copolymers with PTI-DT, exhibiting a better structural order.

Drastic Changes in Properties of Donor-Acceptor Polymers Induced by Asymmetric Structural Isomers for Application to Polymer Solar Cells

Appropriate design of donor-acceptor (D-A) conjugated polymers is important for enhancing their physical, optical, and electrochemical properties. The rapid development of D-A conjugated polymers based on fullerene and nonfullerene derivatives in the past decade has led to an improvement in the performance of polymer solar cells (PSCs). In this study, we designed and synthesized two donor polymers based on the DTffBT acceptor unit, with matching optical absorption range and energy levels with fullerene (PC₇₁BM) and nonfullerene acceptors (ITIC and IDIC), by introducing asymmetric structural isomers of donor units. We demonstrated that materials design by structural modification dramatically affects the physical, optical, and electrochemical properties as well as the crystallinity and photovoltaic performance of the polymers. The results provide valuable insights into materials design for efficient PSCs.

A polymer electron donor based on isoindigo units bearing branched oligo(ethylene glycol) side chains for polymer solar cells

The oligo(ethylene glycol) side chains make the polymer donor exhibit good compatibility with PC₇₁BM and consequently show good photovoltaic performance.

Synthesis and characterization of benzodithiophene and benzotriazole-based polymers for photovoltaic applications

Two high bandgap benzodithiophene-benzotriazole-based polymers were synthesized via palladium-catalysed Stille coupling reaction. In order to compare the effect of the side chains on the opto-electronic and photovoltaic properties of the resulting polymers, the benzodithiophene monomers were substituted with either octylthienyl (PTzBDT-1) or dihexylthienyl (PTzBDT-2) as side groups, while the benzotriazole unit was maintained unaltered. The optical characterization, both in solution and thin-film, indicated that PTzBDT-1 has a red-shifted optical absorption compared to PTzBDT-2, likely due to a more planar conformation of the polymer backbone promoted by the lower content of alkyl side chains. The different aggregation in the solid state also affects the energetic properties of the polymers, resulting in a lower highest occupied molecular orbital (HOMO) for PTzBDT-1 with respect to PTzBDT-2. However, an unexpected behaviour is observed when the two polymers are used as a donor material, in combination with PC61BM as acceptor, in bulk heterojunction solar cells. Even though PTzBDT-1 showed favourable optical and electrochemical properties, the devices based on this polymer present a power conversion efficiency of 3.3%, considerably lower than the efficiency of 4.7% obtained for the analogous solar cells based on PTzBDT-2. The lower performance is presumably attributed to the limited solubility of the PTzBDT-1 in organic solvents resulting in enhanced aggregation and poor intermixing with the acceptor material in the active layer.

Vinylidenedithiophenmethyleneoxindole: a centrosymmetric building block for donor–acceptor copolymers

A novel building block (VDTOI) was designed and synthesized. VDTOI-based copolymers exhibit a high mobility of 0.35 cm² V⁻¹ s⁻¹.

Benzothiophene-flanked diketopyrrolopyrrole polymers: impact of isomeric frameworks on carrier mobilities

The influence of isomeric backbones on field-effect properties in benzothiophene-flanked diketopyrrolopyrrole polymers was investigated.

Bis(thienothiophenyl) diketopyrrolopyrrole-based conjugated polymers with various branched alkyl side chains and their applications in thin-film transistors and polymer solar cells

New thienothiophene-flanked diketopyrrolopyrrole and thiophene-containing π-extended conjugated polymers with various branched alkyl side-chains were successfully synthesized. 2-Octyldodecyl, 2-decyltetradecyl, 2-tetradecylhexadecyl, 2-hexadecyloctadecyl, and 2-octadecyldocosyl groups were selected as the side-chain moieties and were anchored to the N-positions of the thienothiophene-flanked diketopyrrolopyrrole unit. All five polymers were found to be soluble owing to the bulkiness of the side chains. The thin-film transistor based on the 2-tetradecylhexadecyl-substituted polymer showed the highest hole mobility of 1.92 cm2 V(-1) s(-1) due to it having the smallest π-π stacking distance between the polymer chains, which was determined by grazing incidence X-ray diffraction. Bulk heterojunction polymer solar cells incorporating [6,6]-phenyl-C71-butyric acid methyl ester as the n-type molecule and the additive 1,8-diiodooctane (1 vol %) were also constructed from the synthesized polymers without thermal annealing; the device containing the 2-octyldodecyl-substituted polymer exhibited the highest power conversion efficiency of 5.8%. Although all the polymers showed similar physical properties, their device performance was clearly influenced by the sizes of the branched alkyl side-chain groups.

The role of structural and electronic factors in shaping the ambipolar properties of donor–acceptor polymers of thiophene and benzothiadiazole

p- and n-doped states of thiophene-benzothiadiazole based donor–acceptor π-conjugated polymer materials are studied. Results reveal that mesomeric factors mainly influence p-doping, while steric factors account for n-doping peculiarities.

Influence of thermal and solvent annealing on the morphology and photovoltaic performance of solution processed, D–A–D type small molecule-based bulk heterojunction solar cells

Four new small molecules CSDPP9–CSDPP12 were obtained with appended electron donating units in the molecular terminals of a DPP core. On solvent and thermal annealing, for the CSDPP11:PC₇₁BM blend, the BHJ device displayed a PCE of 5.47%.

Heteroatom substituted naphthodithiophene–benzothiadiazole copolymers and their effects on photovoltaic and charge mobility properties

Incorporation of heteroatoms into D–A copolymers enhances the functional properties for applications of OSCs and OFETs.