Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic-Inorganic Hybrid Photocatalysts

Herein, we report for the first time the use of vapor phase infiltration (VPI) to infuse conducting polymers with inorganic metal oxide clusters that together form a photocatalytic material. While vapor infiltration has previously been used to electrically dope conjugated polymers, this is the first time, to our knowledge, that the resultant hybrid material has been demonstrated to have photocatalytic properties. The system studied is poly(3-hexylthiophene-2,5-diyl) (P3HT) vapor infiltrated with TiCl4 and H2O to create P3HT-TiOx organic-inorganic hybrid photocatalytic materials. X-ray photoelectron spectroscopy analysis shows that P3HT-TiOx VPI films consist of a partially oxidized P3HT matrix, and the infiltrated titanium inorganic is in a 4+ oxidation state with mostly oxide coordination. Upon visible light illumination, these P3HT-TiOx hybrids degrade methylene blue dye molecules. The P3HT-TiOx hybrids are 4.6× more photocatalytically active than either the P3HT or TiO2 individually or when sequentially deposited (e.g., P3HT on TiO2). On a per surface area basis, these hybrid photocatalysts are comparable or better than other best in class polymer semiconductor photocatalysts. VPI of TiCl4 + H2O into P3HT makes a unique hybrid structure and idealized photocatalyst architecture by creating nanoscale TiOx clusters concentrated toward the surface achieving extremely high catalytic rates. The mechanism for this enhanced photocatalytic rate is understood using photoluminescence spectroscopy, which shows significant quenching of excitons in P3HT-TiOx as compared to neat P3HT, indicating that P3HT acts as a photosensitizer for the TiOx catalyst sites in the hybrid material. This work introduces a new approach to designing and synthesizing organic-inorganic hybrid photocatalytic materials, with expansive opportunities for further exploration and optimization.

Elevated Photovoltaic Performance in Medium Bandgap Copolymers Composed of Indacenodi-thieno[3,2-b]thiophene and Benzothiadiazole Subunits by Modulating the π-Bridge

Two random conjugated polymers (CPs), namely, PIDTT-TBT and PIDTT-TFBT, in which indacenodithieno[3,2-b]thiophene (IDTT), 3-octylthiophene, and benzothiadiazole (BT) were in turn utilized as electron-donor (D), π-bridge, and electron-acceptor (A) units, were synthesized to comprehensively analyze the impact of reducing thiophene π-bridge and further fluorination on photostability and photovoltaic performance. Meanwhile, the control polymer PIDTT-DTBT with alternating structure was also prepared for comparison. The broadened and enhanced absorption, down-shifted highest occupied molecular orbital energy level (E_HOMO), more planar molecular geometry thus enhanced the aggregation in the film state, but insignificant impact on aggregation in solution and photostability were found after both reducing thiophene π-bridge in PIDTT-TBT and further fluorination in PIDTT-TFBT. Consequently, PIDTT-TBT-based device showed 185% increased PCE of 5.84% profited by synergistically elevated V_OC, J_SC, and FF than those of its counterpart PIDTT-DTBT, and this improvement was chiefly ascribed to the improved absorption, deepened E_HOMO, raised μ_h and more balanced μ_h/μ_e, and optimized morphology of photoactive layer. However, the dropped PCE was observed after further fluorination in PIDTT-TFBT, which was mainly restricted by undesired morphology for photoactive layer as a result of strong aggregation even if in the condition of the upshifted V_OC. Our preliminary results can demonstrate that modulating the π-bridge in polymer backbone was an effective method with the aim to enhance the performance for solar cell.

Synthesis and characterization of novel donor–acceptor type neutral green electrochromic polymers containing an indolo[3,2-b]carbazole donor and diketopyrrolopyrrole acceptor

Indolocarbazole bearing donor–acceptor type polymers have rarely been reported in the electrochromic field despite them having considerable development in the applications of organic photoelectric devices. In this paper, two novel soluble electrochromic polymers, namely PDTCZ-1 and PDTCZ-2, were prepared by chemical polymerization including indolo[3,2-b]carbazole (IC) units as the donor, diketopyrrolopyrrole (DPP) units as the acceptor and bithiophene units as the bridging group. Through diverse characterization techniques such as cyclic voltammetry (CV), scanning electron microscopy (SEM), UV-vis spectroscopy and thermogravimetric analysis (TGA), it was found that PDTCZ-1 and PDTCZ-2 exhibited saturated green in the neutral state and pale green in the oxidized state with optical band gaps of 1.44 eV and 1.39 eV, respectively, as well as demonstrating fast switching speed, satisfactory coloration efficiency and favorable thermal stability. In addition, the proportion of donors to acceptors definitely exerted an influence on the electrochromic properties of the polymers. As the thiophene/IC/DPP ratio changed from 4/3/1 (PDTCZ-1) to 5/4/1 (PDTCZ-2), meaning an increase of the donor ratio, the polymer showed a reduced onset oxidation potential, decreased optical band gap and different dynamic parameters. The positive results suggest that PDTCZ-1 and PDTCZ-2 could be promising candidates as neutral green electrochromic materials and deserve more attention and penetrating research.

Two novel neutral green D–A type conjugated polymers were synthesized, illustrating satisfactory electrochromic properties, such as low band gaps, desirable color switches, excellent solubility and favorable thermal stability.

4-Alkyl-3,5-difluorophenyl-Substituted Benzodithiophene-Based Wide Band Gap Polymers for High-Efficiency Polymer Solar Cells

Two novel polymers PTFBDT-BZS and PTFBDT-BZO with 4-alkyl-3,5-difluorophenyl substituted benzodithiophene as the donor unit, benzothiadiazole or benzooxadiazole as the acceptor unit, and thiophene as the spacer have been synthesized and used as donor materials for polymer solar cells (PSCs). These two polymers exhibited wide optical band gaps of about 1.8 eV. PSCs with the blend of PTFBDT-BZS:PC71BM (1:2, by weight) as the active layer fabricated without using any processing additive and any postannealing treatment showed power conversion efficiency (PCE) of 8.24% with an open circuit voltage (Voc) of 0.89 V, a short circuit current (Jsc) of 12.67 mA/cm(2), and a fill factor (FF) of 0.73 under AM 1.5G illumination, indicating that PTFBDT-BZS is a very promising donor polymer for PSCs. The blend of PTFBDT-BZO:PC71BM showed a lower PCE of 5.67% with a Voc of 0.96 V, a Jsc of 9.24 mA/cm(2), and an FF of 0.64. One reason for the lower PCE is probably due to that PTFBDT-BZO has a smaller LUMO offset with PC71BM, which cannot provide enough driving force for charge separation. And another reason is probably due to that PTFBDT-BZO has a lower hole mobility in comparison with PTFBDT-BZS.

Vinylidenedithiophenmethyleneoxindole: a centrosymmetric building block for donor–acceptor copolymers

A novel building block (VDTOI) was designed and synthesized. VDTOI-based copolymers exhibit a high mobility of 0.35 cm² V⁻¹ s⁻¹.

Straight chain D–A copolymers based on thienothiophene and benzothiadiazole for efficient polymer field effect transistors and photovoltaic cells

Fine modulation of chain linearity suggests an effective way to control interchain ordering for specific application in polymer solar cells or field effect transistors.

Effective End Group Modification of Poly(3-hexylthiophene) with Functional Electron-Deficient Moieties for Performance Improvement in Polymer Solar Cell

A series of end-functionalized poly(3-hexylthiophene)s (P3HTs) were synthesized by end-capping with electron-deficient moieties (EDMs, oxadiazole (OXD) and triazole (TAZ)) to prevent the negative influence of bromine chain ends in the common uncapped P3HT in polymer solar cell (PSC) applications. On the basis of the electron-withdrawing capability of the planar OXD end groups, P3HT-end-OXD relative to the uncapped P3HT exhibits a raised absorption coefficient, extended exciton lifetime, and increased crystalline order in the blend with PCBM, leading to an effectual improvement in photovoltaic parameters. However, P3HT-end-TAZ has an opposite result even worse than that of the uncapped P3HT, arising from bulky TAZ end groups. As a consequence, P3HT-end-OXD gives a power conversion efficiency (PCE) of 4.24%, which is higher than those of the uncapped P3HT (3.28%) and P3HT-end-TAZ (0.50%). The result demonstrates that the EDM modification is a valuable method to tailor the structural defect of polymer chain ends. However, the efficacy is dependent on the structure of EDM.

Synthesis and photovoltaic properties of two new alkoxylphenyl substituted thieno[2,3-f]benzofuran based polymers

Two new alkoxylphenyl substituted thieno[2,3-f]benzofuran (TBFP)-based polymers (PTBFP-BT and PTBFP-BO) were designed and synthesized. Their structures were verified by nuclear magnetic resonance (NMR) spectroscopy, the molecular weights were determined by gel permeation chromatography (GPC) and the thermal properties were investigated by thermogravimetric analysis (TGA). The two polymers showed similar UV-Vis absorption spectra with a broad and strong absorption band from 300-750 nm in solid state. The resulting copolymers exhibited relatively deep highest occupied molecular orbital (HOMO) energy levels (-5.47 and -5.61 eV) for PTBFP-BT and PTBFP-BO, respectively. The device fabricated with PTBFP-BT : PC71BM (1 : 2) showed better balanced hole and electron mobility of 2.49 × 10(-4) cm(2) V(-1) s(-1) and 9.12 × 10(-4) cm(2) V(-1) s(-1), respectively, than those of PTBFP-BO based devices. The polymer solar cells (PSCs), based on the single layer device structure of ITO/PEDOT:PSS/PTBFP-BT : PC71BM (1 : 2, w/w)/ZrAcac/Al with 3 vol% 1,8-diiodooctane (DIO) as additive, showed a relatively high power conversion efficiency (PCE) of 6% under the illumination of AM 1.5G, 100 mW cm(-2), with a high fill factor (FF) of 0.69.

Density functional theory investigation of opto-electronic properties of thieno[3,4-b]thiophene and benzodithiophene polymer and derivatives and their applications in solar cell

PTBs polymers with thieno[3,4-b]thiophene [TT] and benzodithiophene [BDT] units have particular properties, which demonstrate it as one of the best group of donor materials in organic solar cells. In the present work, density functional theory (DFT) is applied to investigate the optimized structure, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), band gap and dihedral angle of PTB7 at B3LYP/6-31G(d). Two different approaches are applied to carry out these investigations: Oligomer extrapolation technique and periodic boundary condition (PBC) method. The results obtained from PBC-DFT method are in fair agreement with experiments. Based on these reliable outcomes; the investigations continued to perform some derivatives of PTB7. In this study, sulfur is substituted by nitrogen, oxygen, silicon, phosphor or selenium atoms in pristine PTB7. Due to the shift of HOMO and LUMO levels, smaller band gaps are predicted to appear in some derivatives in comparison with PTB7. Maximum theoretical efficiencies, η, of the mentioned derivatives as well as local difference of dipole moments between the ground and excited states (Δμge) are computed. The results indicate that substitution of sulfur by nitrogen or oxygen in BDT unit, and silicon or phosphor in TT unit of pristine PTB7 leads to a higher η as well as Δμge.

Low band-gap weak donor–strong acceptor conjugated polymer for organic solar cell

With an additional weak acceptor, the low band-gap donor–acceptor conjugated polymer displayed a remarkable power conversion efficiency of 5.36%.

Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene

As researchers continue to develop new organic materials for solar cells, benzo[1,2-b:4,5-b']dithiophene (BDT)-based polymers have come to the fore. To improve the photovoltaic properties of BDT-based polymers, researchers have developed and applied various strategies leading to the successful molecular design of highly efficient photovoltaic polymers. Novel polymer materials composed of two-dimensional conjugated BDT (2D-conjugated BDT) have boosted the power conversion efficiency of polymer solar cells (PSCs) to levels that exceed 9%. In this Account, we summarize recent progress related to the design and synthesis of 2D-conjugated BDT-based polymers and discuss their applications in highly efficient photovoltaic devices. We introduce the basic considerations for the construction of 2D-conjugated BDT-based polymers and systematic molecular design guidelines. For example, simply modifying an alkoxyl-substituted BDT to form an alkylthienyl-substituted BDT can improve the polymer hole mobilities substantially with little effect on their molecular energy level. Secondly, the addition of a variety of chemical moieties to the polymer can produce a 2D-conjugated BDT unit with more functions. For example, the introduction of a conjugated side chain with electron deficient groups (such as para-alkyl-phenyl, meta-alkoxyl-phenyl, and 2-alkyl-3-fluoro-thienyl) allowed us to modulate the molecular energy levels of 2D-conjugated BDT-based polymers. Through the rational design of BDT analogues such as dithienobenzodithiophene (DTBDT) or the insertion of larger π bridges, we can tune the backbone conformations of these polymers and modulate their photovoltaic properties. We also discuss the influence of 2D-conjugated BDT on polymer morphology and the blends of these polymers with phenyl-C61 (or C71)-butyric acid methyl ester (PCBM). Finally, we summarize the various applications of the 2D-conjugated BDT-based polymers in highly efficient PSC devices. Overall, this Account correlates the molecular structures of the 2D-conjugated BDT-based polymers with their photovoltaic properties. As a result, this Account can guide the molecular design of organic photovoltaic materials and the development of organic materials for other types of optoelectronic devices.