Fluorescence color change of supramolecular polymer networks controlled by crown ether-cation recognition

We report a fluorescent supramolecular polymer networks (SPNs) system based on crown ether-cation recognition. The polymer side chains bear ammonium cations, which can be recognized by host molecules with a B15C5 unit and a quinoline group at each end. The quinoline group makes the host molecule exhibit blue fluorescence. After the formation of SPNs, the recognition of the crown ether-cation transforms the blue fluorescence into yellow fluorescence. The accompanying fluorescence color change during the formation of SPNs makes it with potential applications in the fields of display, printing, information storage, and bioimaging.

Structural Determinants of Stimuli-Responsiveness in Amphiphilic Macromolecular Nano-assemblies

Stimuli-responsive nano-assemblies from amphiphilic macromolecules could undergo controlled structural transformations and generate diverse macroscopic phenomenon under stimuli. Due to the controllable responsiveness, they have been applied for broad material and biomedical applications, such as biologics delivery, sensing, imaging, and catalysis. Understanding the mechanisms of the assembly-disassembly processes and structural determinants behind the responsive properties is fundamentally important for designing the next generation of nano-assemblies with programmable responsiveness. In this review, we focus on structural determinants of assemblies from amphiphilic macromolecules and their macromolecular level alterations under stimuli, such as the disruption of hydrophilic-lipophilic balance (HLB), depolymerization, decrosslinking, and changes of molecular packing in assemblies, which eventually lead to a series of macroscopic phenomenon for practical purposes. Applications of stimuli-responsive nano-assemblies in delivery, sensing and imaging were also summarized based on their structural features. We expect this review could provide readers an overview of the structural considerations in the design and applications of nanoassemblies and incentivize more explorations in stimuli-responsive soft matters.

Recent advances in self-immolative linkers and their applications in polymeric reporting systems

Interest in self-immolative chemistry has grown over the past decade with more research groups harnessing the versatility to control the release of a compound from a larger chemical entity, given...

Construction of a pillararene-based supramolecular polymer network and its application in efficient removal of dyes from water

An AB-type monomer based on a pillar[5]arene host and an imidazolium salt guest was successfully synthesized through a facile way. This monomer can self-assemble into linear supramolecular polymers in chloroform. After the addition of silver ions, the imidazolium salt group coordinated with silver ions to crosslink the linear supramolecular polymers at their ends, resulting in the formation of supramolecular polymer networks. Meanwhile, after further adding iodide ions, the supramolecular polymer network changed back to the linear supramolecular polymer. As a result, the topological structure of the system can be reversibly tuned. Furthermore, this supramolecular polymer network can be applied to remove organic dyes in water, suggesting its great potential in the treatment of waste water.

High-Performance Polymeric Materials through Hydrogen-Bond Cross-Linking

It has always been critical to develop high-performance polymeric materials with exceptional mechanical strength and toughness, thermal stability, and even healable properties for meeting performance requirements in industry. Conventional chemical cross-linking leads to enhanced mechanical strength and thermostability at the expense of extensibility due to mutually exclusive mechanisms. Such major challenges have recently been addressed by using noncovalent cross-linking of reversible multiple hydrogen-bonds (H-bonds) that widely exist in biological materials, such as silk and muscle. Recent decades have witnessed the development of many tailor-made high-performance H-bond cross-linked polymeric materials. Here, recent advances in H-bond cross-linking strategies are reviewed for creating high-performance polymeric materials. H-bond cross-linking of polymers can be realized via i) self-association of interchain multiple H-bonding interactions or specific H-bond cross-linking motifs, such as 2-ureido-4-pyrimidone units with self-complementary quadruple H-bonds and ii) addition of external cross-linkers, including small molecules, nanoparticles, and polymer aggregates. The resultant cross-linked polymers normally exhibit tunable high strength, large extensibility, improved thermostability, and healable capability. Such performance portfolios enable these advanced polymers to find many significant cutting-edge applications. Major challenges facing existing H-bond cross-linking strategies are discussed, and some promising approaches for designing H-bond cross-linked polymeric materials in the future are also proposed.

Photoresponsive chain collapse in a flexo-rigid functional copolymer to modulate the self-healing behaviour

Synthetic systems mimicking the natural self-folding process are attractive to impart multiple structural control over polymer crosslinking and the subsequent alteration of their macroscopic self-healing properties. In that regard, polymers P1-P5 containing pendant photo-crosslinkable moieties were designed and underwent intra- or interchain collapse to form diverse nanostructures. The shape and dimension of the nanostructures could be efficiently controlled by the concentration, solvent compatibility and characteristics of the polymers. Photodimerization of the coumarin moieties transformed the extended coiled chain of the polymer to uniform sized nanoparticles in a dilute condition, while in the crowded macromolecular concentration regime, the polymer folded into nanostructures with polydisperse topologies that were far from a condensed globule or partially swollen globule conformation. Scaling law exponents for polymer chain compaction suggested an interchain collapse with rigid compact segments connected by flexible polymer chains that draws an analogy with elastomers. Such a hardening of the rigid segment as a consequence of photodimerization rendered a significant increase in the glass transition temperature (Tg), which could be reversibly controlled upon decrosslinking. Lastly, the structural variation of this class of polymers over self-healing was explored and the crosslinked polymers showed phototriggered non-autonomic and intrinsic self-healing behaviour under ambient conditions. This is an interesting approach to access a photomodulated self-healing system with low Tg polymers that shows the coexistence of autonomic and nonautonomic self-healing pathways and that may find application in designing smart coatings for photovoltaic devices.

Depolymerization of Bottlebrush Polypentenamers and Their Macromolecular Metamorphosis

The depolymerization of bottlebrush (BB) polymers with varying lengths of polycyclopentene (PCP) backbone and polystyrene (PS) grafts is investigated. In all cases, ring closing metathesis (RCM) depolymerization of the PCP BB backbone appears to occur through an end-to-end depolymerization mechanism as evidenced by size exclusion chromatography. Investigation on the RCM depolymerization of linear PCP reveals a more random chain degradation process. Quantitative depolymerization occurs under thermodynamic conditions (higher temperature and dilution) that drives RCM into cyclopentenes (CPs), each bearing one of the original PS grafts from the BB. Catalyst screening reveals Grubbs' third (G3) and second (G2) generation catalyst depolymerize BBs significantly faster than Grubbs' first generation (G1) and Hoveyda-Grubbs' second generation (HG2) catalyst under identical conditions while solvent (toluene versus CHCl₃) plays a less significant role. The length of the BB backbone and PS side chains also play a minor role in depolymerization kinetics, which is discussed. The ability to completely deconstruct these BB architectures into linear grafts provides definitive insights toward the ATRP "grafting-from" mechanism originally used to construct the BBs. Core-shell BB block copolymers (BBCPs) are shown to quantitatively depolymerize into linear diblock polymer grafts. Finally, the complete depolymerization of BBs into α-cyclopentenyl-PS allows further transformation to other architectures, such as 3-arm stars, through thiol-ene coupling onto the CP end group. These unique materials open the door to stimuli-responsive reassembly of BBs and BBCPs into new morphologies driven by macromolecular metamorphosis.

Confronting the Challenges of Next-Generation Silicon Anode-Based Lithium-Ion Batteries: Role of Designer Electrolyte Additives and Polymeric Binders

Silicon has emerged as the next-generation anode material for high-capacity lithium-ion batteries (LIBs). It is currently of scientific and practical interest to encounter increasingly growing demands for high energy/power density electrochemical energy-storage devices for use in electric vehicles (xEVs), renewable energy sources, and smart grid/utility applications. Improvements to existing conventional LIBs are required to provide higher energy, longer cycle lives. This is attributed to its unparalleled theoretical capacity (4200 mAh g^-1 for Li_4.4 Si), which is approximately 10 times higher than that of a state-of-the-art graphitic anode (372 mAh g^-1 for LiC₆ ), with a suitable operating voltage, natural abundance, environmental benignity, nontoxicity, high safety, and so forth. However, despite the overwhelming beneficial features, the practical integration of LIBs containing a silicon anode beyond the commercial niche is hampered by unavoidable challenges, such as excessive volume changes during the (de-)alloying process, inherently low electrical and ionic conductivities, an unstable solid-electrolyte interphase, and electrolyte drying out. Among various extenuating strategies, non-electrode factors encompassing electrolyte additives and polymeric binders are regarded as the most economical, and effective approaches towards circumventing these disadvantages are in short supply. With the aim of providing an in-depth insight into rapidly growing accounts of electrolyte additives and binders for use with silicon anode-based LIBs, this Review assesses the current state of the art of research and thereby examines opportunities to open up new avenues for the practical realization of these silicon anode-based LIBs.

A ureido-pyrimidone based aspartic acid derivative: synthesis and pH-responsive self-assembly in water

The pH-responsive UPy-aspartic acid aggregates can act as templates for the controlled synthesis of silver nanostructures.

Self-Repair of Structure and Bioactivity in a Supramolecular Nanostructure

Supramolecular nanostructures formed through self-assembly can have energy landscapes, which determine their structures and functions depending on the pathways selected for their synthesis and processing and on the conditions they are exposed to after their initial formation. We report here on the structural damage that occurs in supramolecular peptide amphiphile nanostructures, during freezing in aqueous media, and the self-repair pathways that restore their functions. We found that freezing converts long supramolecular nanofibers into shorter ones, compromising their ability to support cell adhesion, but a single heating and cooling cycle reverses the damage and rescues their bioactivity. Thermal energy in this cycle enables noncovalent interactions to reconfigure the nanostructures into the thermodynamically preferred long nanofibers, a repair process that is impeded by kinetic traps. In addition, we found that nanofibers disrupted during freeze-drying also exhibit the ability to undergo thermal self-repair and recovery of their bioactivity, despite the extra disruption caused by the dehydration step. Following both freezing and freeze-drying, which shorten the 1D nanostructures, their self-repair capacity through thermally driven elongation is inhibited by kinetically trapped states, which contain highly stable noncovalent interactions that are difficult to rearrange. These states decrease the extent of thermal nanostructure repair, an observation we hypothesize applies to supramolecular systems in general and is mechanistically linked to suppressed molecular exchange dynamics.

A Quadruple-Hydrogen-Bonded Supramolecular Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries

With extremely high specific capacity, silicon has attracted enormous interest as a promising anode material for next-generation lithium-ion batteries. However, silicon suffers from a large volume variation during charge/discharge cycles, which leads to the pulverization of the silicon and subsequent separation from the conductive additives, eventually resulting in rapid capacity fading and poor cycle life. Here, it is shown that the utilization of a self-healable supramolecular polymer, which is facilely synthesized by copolymerization of tert-butyl acrylate and an ureido-pyrimidinone monomer followed by hydrolysis, can greatly reduce the side effects caused by the volume variation of silicon particles. The obtained polymer is demonstrated to have an excellent self-healing ability due to its quadruple-hydrogen-bonding dynamic interaction. An electrode using this self-healing supramolecular polymer as binder exhibits an initial discharge capacity as high as 4194 mAh g-1 and a Coulombic efficiency of 86.4%, and maintains a high capacity of 2638 mAh g-1 after 110 cycles, revealing significant improvement of the electrochemical performance in comparison with that of Si anodes using conventional binders. The supramolecular binder can be further applicable for silicon/carbon anodes and therefore this supramolecular strategy may increase the choice of amendable binders to improve the cycle life and energy density of high-capacity Li-ion batteries.

Photo-driven morphological transformations of supramolecular polymers actuated by an overcrowded alkene switch

A novel light-responsive supramolecular polymer was actuated by an overcrowded alkene switch. transOAS-Upy could form well-defined nanospheres in chloroform, which would be transformed into worm-like assemblies after UV irradiation.

Cationic Poly(benzyl ether)s as Self-Immolative Antimicrobial Polymers

Self-immolative polymers (SIMPs) are macromolecules that spontaneously undergo depolymerization into small molecules when triggered by specific external stimuli. We report here the first examples of antimicrobial SIMPs with potent, rapid, and broad-spectrum bactericidal activity. Their antibacterial and hemolytic activities were examined as a function of cationic functionality. Polymers bearing primary ammonium cationic groups showed more potent bactericidal activity against Escherichia coli, relative to tertiary and quaternary ammonium counterparts, whereas the quaternary ammonium polymers showed the lowest hemolytic toxicity. These antibacterial polycations undergo end-to-end depolymerization when triggered by an externally applied stimulus. Specifically, poly(benzyl ether)s end-capped with a silyl ether group and bearing pendant allyl side chains were converted to polycations by photoinitiated thiol-ene radical addition using cysteamine HCl. The intact polycations are stable in solution, but they spontaneously unzip into their component monomers upon exposure to fluoride ions, with excellent sensitivity and selectivity. Upon triggered depolymerization, the antibacterial potency was largely retained but the hemolytic toxicity was substantially reduced. Thus, we reveal the first example of a self-immolative antibacterial polymer platform that will enable antibacterial materials to spontaneously unzip into biologically active small molecules upon the introduction of a specifically designed stimulus.

Dynamic Supramolecular Hydrogels: Regulating Hydrogel Properties through Self-Complementary Quadruple Hydrogen Bonds and Thermo-Switch

We report here a supramolecular hydrogel displaying a wide array of dynamic desirable properties. The key is using an ABA triblock copolymer containing a central poly(ethylene oxide) block and terminal poly(N-isopropylacrylamide) (PNIPAm) block with ureido pyrimidinone (UPy) moieties randomly incorporated. Rapid hydrogelation is triggered upon increasing temperature above the lower critical solution temperature (LCST) of the supramolecular copolymer, where PNIPAm segments dehydrate and assemble into micelles, which subsequently provide hydrophobic microenvironments promoting UPy dimerization to grab polymer chains, thus forming hydrogen-bonded cross-linking points. The supramolecular hydrogels demonstrate fascinating shear-thinning, self-healable, thermo-reversible, and injectable properties, which allow withstanding repeated deformations and 3D construction of complex objects. Mesenchymal stem cells mixed with the hydrogel and injected through needles remain highly viable (>90%) during the encapsulation and delivery process. With these attractive dynamic physical properties, the supramolecular hydrogel holds great promise to support cell or drug therapies.

Coumarin-Appended Stable Fluorescent Self-Complementary Quadruple-Hydrogen-Bonded Molecular Duplexes

In this paper we report a coumarin-conjugated self-assembling system adorned with valuable features such as high duplex stability and a built-in fluorophore, which would augment its application potential. This system forms a highly stable molecular duplex in a nonpolar solvent (K_dim > 1.9 × 10⁷ M^-1 in CDCl₃). Due to the fluorescent property of coumarin, these new structural motifs may find potential application in material chemistry and supramolecular chemistry.

Tailoring single chain polymer nanoparticle thermo-mechanical behavior by cross-link density

Single chain polymer nanoparticles (SCPNs) are formed from intrachain cross-linking of a single polymer chain, making SCPN distinct from other polymer nanoparticles for which the shape is predefined before polymerization. The degree of cross-linking in large part determines the internal architecture of the SCPNs and therefore their mechanical and thermomechanical properties. Here, we use molecular dynamics (MD) simulations to study thermomechanical behavior of individual SCPNs with different underlying structures by varying the ratio of cross-linking and the degree of polymerization. We characterize the particles in terms of shape, structure, glass transition temperature, mobility, and stress response to compressive loading. The results indicate that the constituent monomers of SCPNs become less mobile as the degree of cross-linking is increased corresponding to lower diffusivity and higher stress at a given temperature.

The effect of intramolecular cross links on the mechanochemical fragmentation of polymers in solution

Kinetic studies show that intramolecular cross-link stabilization of polymers towards mechanochemistry in solution is more significant at higher degrees of polymerization.

Advantages and limitations of diisocyanates in intramolecular collapse

A comprehensive examination of the synthesis of single chain polymer nanoparticles (SCPNs) from a copolymer of methyl acrylate (MA) and 2-hydroxyethyl acrylate (HEA) via the intra-chain urethane formation by using hexamethylene diisocyanate (HDI) as a cross-linker is described.

Extremely Stretchable and Fast Self-Healing Hydrogels

Dynamic crosslinking of extremely stretchable hydrogels with rapid self-healing ability is described. Using this new strategy, the obtained hydrogels are able to elongate 100 times compared to their initial length and to completely self-heal within 30 s without external energy input.

Supramolecular polymer networks: hydrogels and bulk materials

Supramolecular polymer networks are materials crosslinked by reversible supramolecular interactions, such as hydrogen bonding or electrostatic interactions. Supramolecular materials show very interesting and useful properties resulting from their dynamic nature, such as self-healing, stimuli-responsiveness and adaptability. Here we will discuss recent progress in polymer-based supramolecular networks for the formation of hydrogels and bulk materials.

Alternating Sulfone Copolymers Depolymerize in Response to Both Chemical and Mechanical Stimuli

This work describes the depolymerization of poly(vinyl acetate-alt-sulfur dioxide) (PVAS) as initiated by chemical and mechanical stimuli. In recent years, macromolecules that are able to depolymerize in response to specific stimuli have been highly sought because of their ability to amplify signal for sensing and drug delivery. Examples include self-immolative polymers from alkoxyphenol derivatives and polyaldehydes. We show here that alternating copolymers of sulfur dioxide and vinyl acetate are able to undergo similar depolymerization into their monomer components in response to various chemical and mechanical stimuli. Certain vinyl monomers such as vinyl acetate are able to polymerize with sulfur dioxide in a perfectly alternating manner, and the resulting copolymer possesses a low ceiling temperature. We show that this polymer is able to break down into its monomer components when subjected to UV/acetone, various Reactive Oxygen Species (ROS), and ultrasonication. In the case of UV, the acetone reacted via a Norrish reaction to produce free radicals that caused clean monomer production. For ROS, the polymer showed reactivity to both oxidizing and radical-containing ROS. Through kinetic studies, these polymers were shown to proceed via a two-part, first-order kinetic model with a fast initiation phase and a slow depolymerization phase. Finally, the polymers were subjected to probe ultrasonication, and depolymerization occurred as well. Most tellingly, the polymer again showed a fast initiation step and continued to depolymerize even after ultrasonication stopped. This class of polymers shows potential for drug delivery in response to both endogenous chemical and externally-applied mechanical cues.

End-capped poly(4,5-dichlorophthalaldehyde): a stable self-immolative poly(aldehyde) for translating specific inputs into amplified outputs, both in solution and the solid state

Poly(4,5-dichlorophthalaldehyde) is a new self-immolative CD_r polymer that is substantially more stable than poly(phthalaldehyde), yet retains its favorable attributes.