Chromium oxide modified mesoporous zirconium dioxide: Efficient heterogeneous catalysts for the synthesis of 5-hydroxymethylfurfural

Achieving the highly efficient carbohydrates conversion to 5-hydroxymethylfurfural (5-HMF) is a promising method to achieve green and sustainable development. However, most currently reported strategies are energy consuming and the 5-HMF yield is relatively lower in the aqueous phase. Herein, a facile method was reported to obtain the effective Cr/ZrO2 catalysts with high acidity and their catalytic performances were investigated for catalyzing fructose to 5-HMF at different temperatures and times. With the catalysis of 15% Cr/ZrO2 catalyst, the highest fructose conversion of 98%, 5-HMF yield of 48.8%, and 5-HMF selectivity of 49.8% are achieved in green solvent with good recyclability. The possible reaction process of the improved catalysis performance is attributed to the highly crystalline and strong acidity of the Cr/ZrO2 catalyst. The Lewis acid sites could increase the overall rate of fructose conversion by promoting side reactions and might suppressing fructose to glucose isomerization. In addition, Cr leakage during the reaction might act as the Bronsted acids to catalyze the fructose dehydration to 5-HMF. The reported method of introducing chromium oxides into ZrO2 catalyst will open a new avenue to promote the practical application of biomass and sustainable development in the future.

Dehydration of Xylose to Furfural over Imidazolium-Based Ionic Liquid with Phase Separation

An environmentally friendly catalyst and task-specific ionic liquid (IL), 1-(4-sulfonic acid) butyl-3-cetyl-2-methyl imidazolium hydrogen sulfate, was applied to the dehydration of xylose to furfural. Its structure was determined by FT-IR, 1H NMR technologies. The solubility of IL in water changed with the temperature, and had the advantages of homogeneous and heterogeneous catalysts. At the given conditions, xylose conversion of 95.3% and furfural yield of 67.5% were achieved over IL.

WCl6 catalyzed cellulose degradation at 80 °C and lower in [BMIM]Cl

Degradation of cellulose to reducing sugar is the key step for the conversion of cellulose to valuable chemicals. Cellulose was degraded by WCl₆ in 1-butyl-3-methyl imidazole chloride at 80 °C and lower. 83% and 85.5% yield of total reducing sugar was gotten at 70 and 80 °C, respectively. Compared with inorganic acid, heteropoly acid, acidic ionic liquid and other metal chlorides, WCl₆ has shown better catalytic performance for degradation of cellulose to reducing sugar. The effect of reaction temperature, reaction time, WCl₆ amount and cellulose concentration were investigated. Degradation of cellulose by WCl₆ in 1-butyl-3-methyl imidazole chloride is a zero reaction. WCl₆ also showed excellent catalytic performance for the degradation of nature cellulose and lignocellulose. Catalyst can be reused at least 5 times without decrease of reducing sugar yield. The mechanism of degradation of WCl₆ was also suggested.

Catalytic Transfer of Fructose to 5-Hydroxymethylfurfural over Bimetal Oxide Catalysts

Direct conversion of fructose into 5-hydroxymethylfurfural (HMF) is achieved by using modified aluminum-molybdenum mixed oxide (S-AlMo) as solid acid catalysts. The synthesized catalyst was characterized by powder XRD, nitrogen adsorption-desorption isotherm, NH3-TPD, and SEM. As a result, the presence of strong acidity, mesostructures, and high surface area in the S-AlMo catalyst was confirmed by nitrogen adsorption-desorption isotherm and NH3-TPD studies. A study by optimizing the reaction conditions such as catalyst dosage, reaction temperature, and time has been performed. Under the optimal reaction conditions, HMF was obtained in a high yield of 49.8% by the dehydration of fructose. Moreover, the generality of the catalyst is also demonstrated by glucose and sucrose with moderate yields to HMF (24.9% from glucose; 27.6% from sucrose) again under mild conditions. After the reaction, the S-AlMo catalyst can be easily recovered and reused four times without significant loss of its catalytic activity.

Recent progress in homogeneous Lewis acid catalysts for the transformation of hemicellulose and cellulose into valuable chemicals, fuels, and nanocellulose

The evolution from petroleum-based products to the bio-based era by using renewable resources is one of the main research challenges in the coming years. Lignocellulosic biomass, consisting of inedible plant material, has emerged as a potential alternative for the production of biofuels, biochemicals, and nanocellulose-based advanced materials. The lignocellulosic biomass, which consists mainly of carbohydrate-based polysaccharides (hemicellulose and cellulose), is a green intermediate for the synthesis of bio-based products. In recent years, the re-engineering of biomass into a variety of commodity chemicals and liquid fuels by using Lewis acid catalysts has attracted much attention. Much research has been focused on developing new chemical strategies for the valorization of different biomass components. Homogeneous Lewis acid catalysts seem to be one of the most promising catalysts due to their astonishing features such as being less corrosive to equipment and being friendlier to the environment, as well as having the ability to disrupt the bonding system effectively and having high selectivity. Thus, these catalysts have emerged as important tools for the highly selective transformation of biomass components into valuable chemicals and fuels. This review provides an insightful overview of the most important recent developments in homogeneous Lewis acid catalysis toward the production and upgrading of biomass. The chemical valorization of the main components of lignocellulosic biomass (hemicellulose and cellulose), the reaction conditions, and process mechanisms are reviewed.

Acid-Catalyzed Conversion of Carbohydrates into Value-Added Small Molecules in Aqueous Media and Ionic Liquids

Biomass is the only realistic major alternative source (to crude oil) of hydrocarbon substrates for the commercial synthesis of bulk and fine chemicals. Within biomass, terrestrial sources are the most accessible, and therein lignocellulosic materials are most abundant. Although lignin shows promise for the delivery of certain types of organic molecules, cellulose is a biopolymer with significant potential for conversion into high-volume and high-value chemicals. This review covers the acid-catalyzed conversion of lower value (poly)carbohydrates into valorized organic building-block chemicals (platform molecules). It focuses on those conversions performed in aqueous media or ionic liquids to provide the reader with a perspective on what can be considered a best case scenario, that is, that the overall process is as sustainable as possible.

Organic Carbonates: Efficient Extraction Solvents for the Synthesis of HMF in Aqueous Media with Cerium Phosphates as Catalysts

We describe a process for the selective conversion of C6 -polyols into 5-hydroxymethylfurfural (5-HMF) in biphasic systems of organic carbonate/water (OC/W), with cerium(IV) phosphates as catalysts. Different reaction parameters such as the OC/W ratio, catalyst loading, reaction time, and temperature, were investigated for the dehydration of fructose. Under the best reaction conditions, a yield of 67.7 % with a selectivity of 93.2 % was achieved at 423 K after 6 h of reaction using [(Ce(PO4)1.5 (H2 O)(H3 O)0.5 (H2 O)0.5)] as the catalyst. A maximum yield of 70 % with the same selectivity was achieved after 12 h. At the end of the reaction, the catalyst was removed by centrifugation, the organic phase was separated from water and evaporated in vacuo (with solvent recovery), and solid 5-HMF was isolated (purity >99 %). The recovery and reuse of the catalyst and the relationship between the structure of the OC and the efficiency of the extraction are discussed. The OC/W system influences the lifetime of the catalysts positively compared to only water.

One-pot catalytic conversion of carbohydrates into furfural and 5-hydroxymethylfurfural

Recently, there has been growing interest in the transformation of renewable biomass into value-added chemicals and biofuels.

Efficient conversion of glucose to 5-hydroxymethylfurfural using bifunctional partially hydroxylated AlF3

Mesoporous AlF₃ material bearing both Lewis and Brønsted acid sites exhibits high catalytic performance in glucose-to-fructose isomerization and subsequent dehydration to HMF (57.3% yield).

One-pot synthesis of levulinic acid from cellulose in ionic liquids

A simple and effective route for the production of levulinic acid (LA) from cellulose has been developed in SO3H-functionalized ionic liquids. The effects of ionic liquid structures, reaction conditions and combination of metal chlorides with ILs on the yield of LA were investigated, where the highest yield of 39.4% was obtained for 120 min in the presence of 1-(4-sulfonic acid) butyl-3-methylimidazolium hydrogen sulphate ([BSMim]HSO4) with addition of H2O. The catalytic activities of ionic liquids depended on the anions and decreased in the order: CF3SO3(-)>HSO4(-) > OAc(-), which was in good agreement with their acidity order. The ILs play a dual solvent-acid role for the cellulose conversion into LA and exhibited favorable catalytic activity over four repeated runs.

Carbonaceous microspheres prepared by hydrothermal carbonization of glucose for direct use in catalytic dehydration of fructose

Carbonaceous material prepared from the hydrothermal carbonization of glucose was used directly without any in situ functionalization or post-modification, and exhibited good catalytic activity for fructose dehydration to 5-hydroxymethylfurfural.

Tris-imidazolium and benzimidazolium ionic liquids: a new class of biodegradable surfactants

Factors that improved the biodegradation of surfactants have successfully used to prepare higher ordered biodegradable tris-imidazolium and benzimidazolium ionic liquids.

Tetrakis-imidazolium and benzimidazolium ionic liquids: a new class of biodegradable surfactants

Novel tetrakis-imidazolium and benzimidazolium ILs containing tetra-ester groups with incorporated quadruple side chains were synthesized successfully as degradable surfactants of expected medical and industrial applications.

InCl3-catalyzed conversion of carbohydrates into 5-hydroxymethylfurfural in biphasic system

InCl3, a water-compatible Lewis acid, was used for the conversion of microcrystalline cellulose to produce 5-hydroxymethylfurfural (HMF) in a H2O/THF biphasic system. Addition of NaCl increased the HMF yield significantly but suppressed the levulinic acid (LA) formation. The HMF yield of 39.7% was obtained in 2h at 200°C in the NaCl-H2O/THF catalytic system catalyzed by InCl3. The catalytic system also showed effectiveness to convert other carbohydrates to HMF, including glucose, fructose, sucrose, starch, which demonstrated great potential towards different feedstocks.

Efficient conversion of cellulose into biofuel precursor 5-hydroxymethylfurfural in dimethyl sulfoxide-ionic liquid mixtures

In recent years, cellulose has received increasing attention as a potential material for the production of biofuels and bio-based chemicals. In this study, a new process for the efficient conversion of cellulose into 5-hydroxymethylfurfural (HMF) was developed by the use of AlCl3 as the catalyst in DMSO-ionic liquid ([BMIM]Cl) mixtures. Various reaction parameters such as reaction time, reaction temperature, solvent and catalyst dosage were investigated in detail. A high HMF yield of 54.9% was obtained from cellulose at 150°C after 9h in a mixed solvent of DMSO-[BMIM]Cl (10 wt.%). More importantly, the catalytic system could be reused for several times despite of the slight loss of its catalytic activity.

Catalytic Transformation of Fructose and Sucrose to HMF with Proline-Derived Ionic Liquids under Mild Conditions

L-Proline derived ionic liquids (ILs) used as both solvent and catalyst were efficient for transformation of fructose and sucrose to 5-hydroxymethylfurfural (HMF) in the presence of water. Response surface methodology (RSM) was employed to optimize fructose dehydration process, and a maximum HMF yield of 73.6% could be obtained at 90°C after 50 min. The recycling of the IL exhibited an almost constant activity during five successive trials, and a possible reaction mechanism for the dehydration of fructose to HMF was proposed.