All-Perfluorosulfonated-Ionomer Composite Membranes Containing Blow-Spun Fibers: Effect of a Thin Fiber Framework on Proton Conductivity and Mechanical Properties

In this study, thin fiber composite polymer electrolyte membranes (PEMs) were prepared using short side-chain perfluorosulfonic acid (PFSA) ionomers, Aquivion, to create composite PEMs with improved proton conductivity and improved mechanical properties. PFSA thin fiber webs prepared by blow spinning and successive hot pressing were used as the porous substrate. Herein, PFSA ionomers were used for both the substrate and the matrix of the composite PEMs, and their structures, properties, and fuel cell performance were characterized. By adding the PFSA thin fiber webs to the matrix, the proton conductivity was enhanced and the mechanical properties were slightly improved. The prepared PFSA thin fiber composite PEM showed better FC performance than that of the pristine PFSA one for the high-temperature low-humidity condition in addition to the low-temperature high-humidity one. To the best of our knowledge, this is the first report on the all PFSA composite membranes containing a PFSA thin fiber framework.

Electrochemical Performance of Symmetric Solid-State Supercapacitors Based on Carbon Xerogel Electrodes and Solid Polymer Electrolytes

For the development and optimization of solid-state symmetrical supercapacitors, herein, we propose using carbon-based electrodes and sodium- and lithium-form Aquivion electrolyte membranes, which serve as the separator and electrolyte. Carbon xerogels, synthesized using microwave-assisted sol-gel methodology, with designed and controlled properties were obtained as electrode materials. Commercial activated carbon (YP-50F, "Kuraray Europe" GmbH) was used as the active material for comparison. Notably, the developed solid-state symmetrical supercapacitors provide sufficiently high specific capacitances of 105-110 F g-1 at 0.2 A g-1, along with an energy density of 4.5 Wh kg-1 at 300 W kg-1, and a voltage window of 0-1.2 V in aqueous environments, also demonstrating an excellent cycling stability for up to 10,000 charge/discharge cycles. These results can demonstrate the potential applications of carbon xerogel as the active electrode material and cation exchange membrane as the electrolyte in the development of solid-state supercapacitor devices.

Synthesis, Characterization, and Proton Conductivity of Muconic Acid-Based Polyamides Bearing Sulfonated Moieties

Most commercially available polymers are synthesized from compounds derived from petroleum, a finite resource. Because of this, there is a growing interest in the synthesis of new polymeric materials using renewable monomers. Following this concept, this work reports on the use of muconic acid as a renewable source for the development of new polyamides that can be used as proton-exchange membranes. Muconic acid was used as a comonomer in polycondensation reactions with 4,4'-(hexafluoroisopropylidene)bis(p-phenyleneoxy)dianiline, 2,5-diaminobencensulfonic acid, and 4,4'-diamino-2,2'-stilbenedisulfonic acid as comonomers in the synthesis of two new series of partially renewable aromatic-aliphatic polyamides, in which the degree of sulfonation was varied. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (1H, 13C, and 19F-NMR) techniques were used to confirm the chemical structures of the new polyamides. It was also observed that the degree of sulfonation was proportional to the molar ratio of the diamines in the feed. Subsequently, membranes were prepared by casting, and a complete characterization was conducted to determine their decomposition temperature (Td), glass transition temperature (Tg), density (ρ), and other physical properties. In addition, water uptake (Wu), ion-exchange capacity (IEC), and proton conductivity (σp) were determined for these membranes. Electrochemical impedance spectroscopy (EIS) was used to determine the conductivity of the membranes. MUFASA34 exhibited a σp value equal to 9.89 mS·cm-1, being the highest conductivity of all the membranes synthesized in this study.

Approaches to the Modification of Perfluorosulfonic Acid Membranes

Polymer ion-exchange membranes are featured in a variety of modern technologies including separation, concentration and purification of gases and liquids, chemical and electrochemical synthesis, and hydrogen power generation. In addition to transport properties, the strength, elasticity, and chemical stability of such materials are important characteristics for practical applications. Perfluorosulfonic acid (PFSA) membranes are characterized by an optimal combination of these properties. Today, one of the most well-known practical applications of PFSA membranes is the development of fuel cells. Some disadvantages of PFSA membranes, such as low conductivity at low humidity and high temperature limit their application. The approaches to optimization of properties are modification of commercial PFSA membranes and polymers by incorporation of different additive or pretreatment. This review summarizes the approaches to their modification, which will allow the creation of materials with a different set of functional properties, differing in ion transport (first of all proton conductivity) and selectivity, based on commercially available samples. These approaches include the use of different treatment techniques as well as the creation of hybrid materials containing dopant nanoparticles. Modification of the intrapore space of the membrane was shown to be a way of targeting the key functional properties of the membranes.

Electrospun Composite Proton-Exchange and Anion-Exchange Membranes for Fuel Cells

A fuel cell is an electrochemical device that converts the chemical energy of a fuel and oxidant into electricity. Cation-exchange and anion-exchange membranes play an important role in hydrogen fed proton-exchange membrane (PEM) and anion-exchange membrane (AEM) fuel cells, respectively. Over the past 10 years, there has been growing interest in using nanofiber electrospinning to fabricate fuel cell PEMs and AEMs with improved properties, e.g., a high ion conductivity with low in-plane water swelling and good mechanical strength under wet and dry conditions. Electrospinning is used to create either reinforcing scaffolds that can be pore-filled with an ionomer or precursor mats of interwoven ionomer and reinforcing polymers, which after suitable processing (densification) form a functional membrane. In this review paper, methods of nanofiber composite PEMs and AEMs fabrication are reviewed and the properties of these membranes are discussed and contrasted with the properties of fuel cell membranes prepared using conventional methods. The information and discussions contained herein are intended to provide inspiration for the design of high-performance next-generation fuel cell ion-exchange membranes.

Membrane materials for energy production and storage

Ion exchange membranes are widely used in chemical power sources, including fuel cells, redox batteries, reverse electrodialysis devices and lithium-ion batteries. The general requirements for them are high ionic conductivity and selectivity of transport processes. Heterogeneous membranes are much cheaper but less selective due to the secondary porosity with large pore size. The composition of grafted membranes is almost identical to heterogeneous ones. But they are more selective due to the lack of secondary porosity. The conductivity of ion exchange membranes can be improved by their modification via nanoparticle incorporation. Hybrid membranes exhibit suppressed transport of co-ions and fuel gases. Highly selective composite membranes can be synthesized by incorporating nanoparticles with modified surface. Furthermore, the increase in the conductivity of hybrid membranes at low humidity is a significant advantage for fuel cell application. Proton-conducting membranes in the lithium form intercalated with aprotic solvents can be used in lithium-ion batteries and make them more safe. In this review, we summarize recent progress in the synthesis, and modification and transport properties of ion exchange membranes, their transport properties, methods of preparation and modification. Their application in fuel cells, reverse electrodialysis devices and lithium-ion batteries is also reviewed.

Improving the Mechanical Durability of Short-Side-Chain Perfluorinated Polymer Electrolyte Membranes by Annealing and Physical Reinforcement

Physically reinforced short-side-chain perfluorinated sulfonic acid electrolyte membranes were fabricated by annealing and using a porous support. Five types of solution-cast membranes were produced from commercial perfluorinated ionomers (3M and Aquivion (AQ)) with different equivalent weights, annealed at different temperatures, and characterized in terms of ion conductivity, water uptake, and in-plane/through-plane swelling, while the effect of annealing on physical structure of membranes was evaluated by small-angle X-ray scattering and dynamic mechanical analysis. To create a reinforced composite membrane (RCM), we impregnated a polytetrafluoroethylene porous support with 3M 729 and AQ 720 electrolytes exhibiting excellent proton conductivity and water uptake. The electrolyte impregnation stability for the porous support was evaluated using a solvent resistance test, and the best performance was observed for the 3M 729 RCM annealed at 200 °C. Both annealed and nonannealed 3M 729 RCMs were used to produce membrane electrode assemblies, the durability of which was evaluated by open-circuit voltage combined wet-dry cycling tests. The nonannealed 3M 729 RCM survived 5800 cycles, while the 3M 729 RCM annealed at 200 °C survived 16 600 cycles and thus exhibited improved mechanical durability.

Preparation and characterization of a PFSA–PVDF blend nanofiber membrane and its preliminary application investigation

Herein, electrospinnability of perfluorosulfonic acid (PFSA)–polyvinylidene fluoride (PVDF) blends with different ratios of PVDF were investigated in detail.

Synthesis, freestanding membrane formation, and properties of novel sulfonated hyperbranched polyimides

A novel six-membered ring hyperbranched polyimide (HBPI) has been synthesized by condensation polymerization of a difunctional monomer, 9,9-fluorenylidenebis(4,1-phenylene)bis(oxy)-4,4′-bis(1,8-naphthalic anhydride) (FBPNA), and a trifunctional monomer, tris(4-aminophenyl)amine (TAPA), at the molar ratio of FBPNA/TAPA = 1:1 in m-cresol at 180°C for 20 h. The resultant HBPI is further modified via end-capping reaction with 4-phenoxy-1,8-anhydride naphthalene (PNA). Post-sulfonation is performed in concentrated sulfuric acid at different temperatures (50, 60, and 70°C) for the pristine HBPI and 50°C for the PNA-modified polyimides to give various sulfonated HBPIs. Freestanding and tough membranes have been successfully fabricated by casting the polymer solutions containing a cross-linker, bisphenol A epoxy resin, at 80°C. The ion exchange capacities of the resultant membranes are in the range of 1.35–2.21 meq g−1 depending on the degree of chemical modification and the sulfonation conditions. Membrane properties such as water uptake, swelling ratio, proton conductivity, and radical oxidative stability are investigated.

Structural characteristics of hydrated protons in the conductive channels: effects of confinement and fluorination studied by molecular dynamics simulation

The relationship between the proton conductive channel and the hydrated proton structure is of significant importance for understanding the deformed hydrogen bonding network of the confined protons which matches the nanochannel. In general, the structure of hydrated protons in the nanochannel of the proton exchange membrane is affected by several factors. To investigate the independent effect of each factor, it is necessary to eliminate the interference of other factors. In this paper, a one-dimensional carbon nanotube decorated with fluorine was built to investigate the independent effects of nanoscale confinement and fluorination on the structural properties of hydrated protons in the nanochannel using classical molecular dynamics simulation. In order to characterize the structure of hydrated protons confined in the channel, the hydrogen bonding interaction between water and the hydrated protons has been studied according to suitable hydrogen bond criteria. The hydrogen bond criteria were proposed based on the radial distribution function, angle distribution and pair-potential energy distribution. It was found that fluorination leads to an ordered hydrogen bonding structure of the hydrated protons near the channel surface, and confinement weakens the formation of the bifurcated hydrogen bonds in the radial direction. Besides, fluorination lowers the free energy barrier of hydronium along the nanochannel, but slightly increases the barrier for water. This leads to disintegration of the sequential hydrogen bond network in the fluorinated CNTs with small size. In the fluorinated CNTs with large diameter, the lower degree of confinement produces a spiral-like sequential hydrogen bond network with few bifurcated hydrogen bonds in the central region. This structure might promote unidirectional proton transfer along the channel without random movement. This study provides the cooperative effect of confinement dimension and fluorination on the structure and hydrogen bonding of the slightly acidic water in the nanoscale channel.

Trends in small angle neutron scattering of actinide–trialkyl phosphate complexes: a molecular insight into third phase formation

SANS as a molecular probe was used to investigate and quantify the aggregation tendency of metal complexes, facilitating the prediction of third phase formation.