Selectively multilayered distribution of stereocomplex crystallite and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) ribbons to achieve highly ductile and strong poly(l-lactide) composites

Blending poly(l-lactide) (PLLA) with elastic polymers is an efficient way to obtain highly ductile materials (> 300 %), but it is accompanied by a significant reduction in strength. In this work, a special alternating multilayered composites with alternating stereocomplex crystallite (SC) (PLLA/poly(d-lactide) (PDLA) layer) and highly oriented Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) ribbons (PLLA/PHBV layer) is in situ constructed during laminated structuring process. Experimental results show that in situ formed PHBV ribbons are limitedly distributed in the thickness direction and align parallel to the layer interfaces. More interestingly, not only highly oriented shish crystals but also sparse lamellae of PLLA, which are arrested by SC, shish crystals, and PHBV ribbons, are in situ formed. Compared with sea-island structured composites prepared by traditional compression molding, the alternating multilayered composites show an increase in elongation at break from 8.7 % to 345.1 % and an increase in yield strength from 61.4 MPa to 73.2 MPa. During the tensile testing, the PLLA/PHBV layers firstly form micro-fibrils and micro-voids, driving the molecular chains of the PLLA/PDLA layer to respond in time to external forces through stress transfer of rich continuous layer interfaces. Since shear yielding and plastic deformation can easily penetrate the entire matrix, the alternating multilayered composites go a brittle-ductile transformation and the ductility is improved significantly. The increased strength of the alternating multilayered material is ascribed to the stiff shish crystals and SC. This work provides important guidance for the durable application of strong and ductile PLLA-based materials.

Entirely environment-friendly polylactide composites with outstanding heat resistance and superior mechanical performance fabricated by spunbond technology: Exploring the role of nanofibrillated stereocomplex polylactide crystals

This study aims at investigating the manufacturing and characterization of all-polylactide composites prepared by melt spunbond spinning technology. To do so, a series of asymmetric stereocomplex polylactide (SC-PLA) blends (PLLA 95 wt%/PDLA 5 wt%) was melt spun. To examine the impact of molecular structure of PDLA, the blends of linear PLLA, and low and high molecular weight as well as branched PDLAs, were subjected to a single step spunbond process. DSC thermograms of the samples showed two melting temperatures at around 170 °C and 210 °C, which were attributed to the melting of homo and stereocomplex crystals, respectively. The samples were spun at 190 °C, between the homo and stereocomplex crystals' melting temperatures, and at 230 °C, above the stereocomplex crystals' melting temperature. Morphology images showed the formation of fibers in the range of 40-50 μm. Shear rheological measurements revealed that the spun SC-PLA samples had a substantially higher viscosity and storage modulus in the low frequency region, and higher shear thinning behavior, compared to the non-spun samples. Extensional rheology measurements also showed that the spun samples demonstrated strain hardening behavior. Substantial enhancement of rheological properties was noted for the samples containing the branched and high molecular weight PDLA spun at 230 °C. After etching, the spun samples at 190 °C exhibited small spherical crystals with diameters in the range of 80-90 nm, whereas comparatively thin fibers in the size range of 60-70 nm were observed for the samples spun at 230 °C. Remarkable enhancements up to 100% and 60% was noted for the tensile modulus and strength, respectively, of the spun SC-PLA samples. The spun fibers also demonstrated a considerable reduction in boiling water and hot air shrinkage. The distinctive role of nanofibrillated stereocomplex crystals as a rheology modifier and a crystallization nucleating agent makes PLA more sustainable and paves the way for the fabricated all-PLA composites in applications requiring high heat resistance and superior mechanical performance. The present study unequivocally indicates a huge potential for the sustainable entirely all-PLA products manufactured by fiber in fiber and, indeed, unfolds unknown opportunities for PLA-based merchandises in future.

Poly(lactic acid) stereocomplexes: A decade of progress

Upon blending enantiomeric poly(l-lactide) [i.e., poly(l-lactic acid) (PLLA)] and poly(d-lactide) (PDLA) [i.e., poly(d-lactic acid) (PDLA)] or synthesis of stereo block poly(lactide) [i.e., poly(lactic acid) (PLA)], a stereocomplex (SC) is formed. PLA SC has a higher melting temperature (or heat resistance), mechanical performance, and hydrolysis-resistance compared to those of neat PLLA and PDLA. Because of such effects, PLA SC has been extensively studied in terms of biomedical and pharmaceutical applications as well as commodity, industrial, and environmental applications. Stereocomplexation stabilizes and strengthens PLA-based hydrogel or nanoparticles for biomedical applications. Stereocomplexation increases the barrier property of PLA-based materials and thereby prolongs drug release from PLA based materials. In addition, PLA SC is attracting significant attention because it can act as a nucleating agent for the widely used biobased polymer PLLA and thereby the heat resistance of PLLA-based materials can be enhanced. Interestingly, a wide variety of SCs other than PLA SC are found to have been formed in the enantiomeric substituted PLA blends and stereo block substituted PLA polymers. In the present review article, a decade of progress in investigation of PLA SCs is summarized.

WITHDRAWN: PLA Stereocomplexes: A Decade of Progress

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Stereocomplex poly(lactic acid) nanoparticles crystallized through nanoporous membranes and application as nucleating agent

Stereocomplex crystallization of poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) was performed by flowing their blended solution through nano-channels of porous membranes.

Unusual hierarchical distribution of β-crystals and improved mechanical properties of injection-molded bars of isotactic polypropylene

Shish-kebab and β-cylindrite morphology were observed simultaneously in the GAIM iPP part, which showed greatly improved mechanical properties.