Effects of nano-silica on the crystallization, structure, and mechanical properties of crosslinked ethylene-octene copolymer/nano-silica composites

Nano-silica (SiO2) has been widely used to fill rubbers (crosslinked) and usual polyolefin elastomers (POEs). SiO2 filled POE with crystalline structure can also be crosslinked. Crystallization, structure, and mechanical properties of crosslinked POE/SiO2 composites can be affected by SiO2. In this paper, crosslinked POE/SiO2 composites were obtained through two different methods: dynamic crosslinking in molten state and static crosslinking. For the non-crosslinked and static crosslinked composites, SiO2 had a more significant effect on the nucleation in non-crosslinked POE than in static crosslinked POE. For the dynamic crosslinked composite, SiO2 and crosslinking points hindered the mobility of POE chains and suppressed the POE crystallization, resulting in smaller and fewer crystals. Dynamic mechanical analysis showed that the SiO2 and POE were compatible, as evidenced by the lower tan(δ) value in SiO2-filled samples. The latter was more consistent with the higher tensile strength and elongation at break for the non-crosslinked and static crosslinked composites than for the non-filled samples. However, the dynamic crosslinked composite exhibited the worst elongation at break, resulting from the lowest number of crystals and shortened molecular chains due to the shearing that occurred during crosslinking process. The SiO2 had no observable effect on the permanent deformation of samples.

The Role of Interfacial Interactions on the Functional Properties of Ethylene-Propylene Copolymer Containing SiO2 Nanoparticles

In this paper, the mechanical properties, thermal stability, and transparency of ethylene-propylene copolymer (EPC) elastomer modified with various weight percentages (1, 3, and 5 wt.%) of SiO₂ nanofillers have been studied. The nanocomposites were prepared via a simple melt mixing method. The morphological results revealed that the nanofillers were uniformly dispersed in the elastomer, where a low concentration of SiO₂ (1 wt.%) had been added into the elastomer. The FTIR showed that there are interfacial interactions between EPC matrix and silanol groups of SiO₂ nanoparticles. Moreover, by the addition of 1 wt.% of SiO₂ in the EPC, the tensile strength and elongation at break of EPC increased by about 38% and 27%, respectively. Finally, all samples were optically transparent, and the transparency of the nanocomposites reduced by increasing the content of SiO₂ nanoparticles.

Laser-Assisted Printed Flexible Sensors: A Review

This paper provides a substantial review of some of the significant research done on the fabrication and implementation of laser-assisted printed flexible sensors. In recent times, using laser cutting to develop printed flexible sensors has become a popular technique due to advantages such as the low cost of production, easy sample preparation, the ability to process a range of raw materials, and its usability for different functionalities. Different kinds of laser cutters are now available that work on samples very precisely via the available laser parameters. Thus, laser-cutting techniques provide huge scope for the development of prototypes with a varied range of sizes and dimensions. Meanwhile, researchers have been constantly working on the types of materials that can be processed, individually or in conjugation with one another, to form samples for laser-ablation. Some of the laser-printed techniques that are commonly considered for fabricating flexible sensors, which are discussed in this paper, include nanocomposite-based, laser-ablated, and 3D-printing. The developed sensors have been used for a range of applications, such as electrochemical and strain-sensing purposes. The challenges faced by the current printed flexible sensors, along with a market survey, are also outlined in this paper.