PtNPt/MWCNT-PEDOT:PSS-Modified Microelectrode Arrays for the Synchronous Dopamine and Neural Spike Detection in Rat Models of Sleep Deprivation

In this study, a biosensor assembly based on microelectrode arrays (MEAs) modified with PtNPt/MWCNT-PEDOT:PSS nanocomposites is presented to synchronously detect the dopamine (DA) and electrophysiological activities in rat brains. Different morphological and electrochemical characterizations were conducted to show the excellent mechanical and electrical properties of the as-prepared probes. The developed biosensors realized the sensitive and selective detection of DA with the existence of significant interferences such as uric acid (UA), ascorbic acid (AA), glutamate (Glu), and 3,4-dihydroxyphenylacetic acid (DOPAC). Calibration curve for the DA response was linear with the concentration from 0.05 μM to 79 μM (R = 0.999), with a sensitivity of 30.561 pA/μM and detection limit as low as 50 nM. Finally, the proposed microelectrode was applied to be implanted into the cortex and caudate putamen (CPU) of rats, which was demonstrated to stably measure the synchronous neurochemical and neurophysiological changes caused by 72 h sleep deprivation. The in vivo measuring results showed that the sleep deprivation increased the DA release and neural spike activity in both cortex and CPU. The local field potential (LFP) power in the delta and theta band was significantly increased as well. These changes in brain may reflect the brain's adaptive reaction toward the side effects induced by sleep deprivation and may partially explain the mechanism of forced wakefulness in the presence of accumulated sleep pressure.

Phytic acid doped poly(3,4-ethylenedioxythiophene) modified with copper nanoparticles for enzymeless amperometric sensing of glucose

A nanocomposite consisting of phytic acid (PA) that was doped with poly(3,4-ethylenedioxy-thiophene) (PEDOT) and modified with copper nanoparticles (CuNPs) was placed on a glassy carbon electrode and then applied in an enzymeless glucose sensor. The undulating PEDOT/PA composite has good conductivity and a large surface area, which was suitable as substrate for the uniform growth of CuNPs. The modified electrode typically operated at a potential near 0.55 V (vs. Ag/AgCl) demonstrated remarkable catalytic activity towards direct oxidation of glucose in NaOH solution (the major limitation of this sensor). Figures of merit include (a) a wide analytical range (5 to 403 μM); (b) high sensitivity (79.27 μA·μM^-1·cm^-2), (c) a low detection limit (0.28 μM at a signal to noise ratio of 3), and (d) fast response (< 4 s). Graphical abstractA nanocomposite of phytic acid (PA) doped poly(3,4-ethylenedioxy-thiophene) (PEDOT) modified with copper nanoparticles (CuNPs) onto a glassy carbon electrode was prepared by electrochemical strategy. The CuNPs/PEDOT/PA-modified electrodes were applied in enzymeless glucose sensors with high performance.

Enzyme-Free Plasmonic Biosensor for Direct Detection of Neurotransmitter Dopamine from Whole Blood

Complex biological fluids without pretreatment, separation, or purification impose stringent limitations on the practical deployment of label-free plasmonic biosensors for advanced assays needed in point of care applications. In this work, we present an enzyme-free plasmonic neurotransmitter dopamine biosensor integrated with a microfluidic plasma separator. This integrated device allows the in-line separation of plasma directly from the bloodstream and channels it to the active detection area, where inorganic cerium oxide nanoparticles function as local selective dopamine binding sites through strong surface redox reaction. A thorough understanding and engineering of the nanoparticles is carried out to maximize its dopamine sensitivity and selectivity. We obtain detection of dopamine at 100 fM concentration in simulated body fluid and 1 nM directly from blood without any prior sample preparation. The detection selectivity is found to be at least five-times higher compared to the common interfering species. This demonstration shows the feasibility of the practical implementation of the proposed plasmonic system in detection of variety of biomarkers directly from the complex biological fluids.

Nanocomposites Based on Thermoplastic Polymers and Functional Nanofiller for Sensor Applications

Thermoplastic polymers like polyolefins, polyesters, polyamide, and styrene polymers are the most representative commodity plastics thanks to their cost-efficient manufacturing processes, excellent thermomechanical properties and their good environmental compatibility, including easy recycling. In the last few decades much effort has been devoted worldwide to extend the applications of such materials by conferring on them new properties through mixing and blending with different additives. In this latter context, nanocomposites have recently offered new exciting possibilities. This review discusses the successful use of nanostructured dispersed substrates in designing new stimuli-responsive nanocomposites; in particular, it provides an updated description of the synthetic routes to prepare nanostructured systems having the typical properties of thermoplastic polymers (continuous matrix), but showing enhanced optical, conductive, and thermal features dependent on the dispersion topology. The controlled nanodispersion of functional labeled clays, noble metal nanoparticles and carbon nanotubes is here evidenced to play a key role in producing hybrid thermoplastic materials that have been used in the design of devices, such as NLO devices, chemiresistors, temperature and deformation sensors.

Dispersive micro-solid-phase extraction of dopamine, epinephrine and norepinephrine from biological samples based on green deep eutectic solvents and Fe3O4@MIL-100 (Fe) core–shell nanoparticles grafted with pyrocatechol

DA, EP and NE were determined without interference of ascorbic acid using grafted Fe₃O₄@MIL-100 (Fe) NPs and a green solvent.

Review on Polymers for Thermoelectric Applications

In this review, we report the state-of-the-art of polymers in thermoelectricity. Classically, a number of inorganic compounds have been considered as the best thermoelectric materials. Since the prediction of the improvement of the figure of merit by means of electronic confinement in 1993, it has been improved by a factor of 3-4. In the mean time, organic materials, in particular intrinsically conducting polymers, had been considered as competitors of classical thermoelectrics, since their figure of merit has been improved several orders of magnitude in the last few years. We review here the evolution of the figure of merit or the power factor during the last years, and the best candidates to compete with inorganic materials. We also outline the best polymers to substitute classical thermoelectric materials and the advantages they present in comparison with inorganic systems.

Preparation and electrochemical catalytic application of nanocrystalline cellulose doped poly(3,4-ethylenedioxythiophene) conducting polymer nanocomposites

Nanocrystalline cellulose doped conducting polymer PEDOT nanocomposites can be prepared through both chemical (right) and electrochemical (left) polymerization methods.

Tunable hydroxylated surfactants: an efficient toolbox towards anisotropic gold nanoparticles

Size- and shape-controlled anisotropic gold nanoparticles were reported. The organisation of tunable hydroxylated surfactants providing various nanostructured materials has been demonstrated.