Green synthesis of gold nanoparticles from the aqueous extracts of Sphagneticola trilobata (L.) J.F Pruski as anti-breast cancer agents

The invasive plant, Sphagneticola trilobata (L.) J. F. Pruski, has been known for its bioactivities and used to synthesize gold nanoparticles (AuNPs). Nonetheless, previous research has not directly compared the effectiveness of the plant parts in producing the AuNPs. The objective of this study was to compare the effectiveness of the flower and leaf of S. trilobata in synthesizing AuNPs. S. trilobata leaves and flowers were separately extracted using distilled water at 60°C for 30 min. The leaf and flower extracts were mixed with the HAuCl. 3H2O and heated to 60°C for 30 min to yield AuNPs-ALSt and AuNPs-AFSt, respectively. AuNPs were also prepared using trisodium citrate (Na3C6H5O7) as a control. The resultant AuNPs were characterized using an ultraviolet-visible spectrophotometer, particle size analyzer, and scanning electron microscope. Antioxidant activity was evaluated based on 1-diphenyl-2-picrylhydrazyl (DPPH) inhibition and anticancer activity- 3-(4, 5-dimethylthiazolyl-2)-2, 5-diphenyltetrazolium bromide assay against MCF-7 cells. The AuNPs-ALSt and AuNPs-AFSt were revealed to have better stability and smaller particle diameters. AuNPs-ALSt and AuNPs-AFSt had average particle diameters of 11.86 ± 3.37 and 34.86 ± 23.56 nm, respectively. Agglomeration was predominantly observed in AuNPs synthesized using the flower or leaf extract as stipulated to be affected by the insufficient capping agent and intense hydrolytic reaction. AuNPs-AFSt had higher DPPH antioxidant activity than AuNPs-ALSt with half-maximal inhibitory concentrations of IC50 123.44 and 168.83 ppm, respectively. Both AuNPs-ALSt and AuNPs-AFSt could inhibit 80% growth of the MCF-7; however, at lower concentrations, inhibitory effects were more pronounced in AuNPs-AFSt. Aqueous extracts of S. trilobata flowers and leaves could be used to synthesize AuNPs, whereas the former yielded AuNPs with higher biological activities.

Protein-supported transition metal catalysts: Preparation, catalytic applications, and prospects

The immobilization of transition metal catalysts onto supports enables their easier recycling and improves catalytic performance. Protein supports not only support and stabilize transition metal catalysts but also enable the incorporation of biocompatibility and enzymatic catalysis into these catalysts. Consequently, the engineering of protein-supported transition metal catalysts (PTMCs) has emerged as an effective approach to improving their catalytic performance and widening their catalytic applications. Here, we review the recent development of the preparation and applications of PTMCs. The preparation of PTMCs will be summarized and discussed in terms of the types of protein supports, including proteins, protein assemblies, protein-polymer conjugates, and cross-linked proteins. Then, their catalytic applications including organic synthesis, photocatalysis, polymerization, and biomedicine, will be surveyed and compared. Meanwhile, the established catalytic structures-function relationships will be summarized. Lastly, the remaining issues and prospects will be discussed. By surveying a wide range of PTMCs, we believe that this review will attract a broad readership and stimulate the development of PTMCs.

Preparation of highly sensitive electrochemical sensor for detection of nitrite in drinking water samples

Nitrite is both an environmental contaminant and a food additive. Excessive intake of nitrites not only causes blood diseases, but also has the potential risk of causing cancer. Therefore, rapid detection of nitrite in water is necessary. In this work, we propose an electrochemical sensor for the sensing of nitrite. Glassy carbon electrodes modified with noble metal nanomaterials have been widely used in the preparation of sensors, but the surface properties of noble metals largely affect the sensing performance. This work proposes the biosynthesis of Au nanoparticles using the pollen extract of Lycoris radiata as a reducing agent. Flavonoids rich in pollen can be used as weak reducing agents for the reduction of chloroauric acid, and slowly synthesize uniformly dispersed Au nanoparticles. These Au nanoparticles do not agglomerate because they contain small biological molecules on the surface and can form a homogeneous sensing interface on the electrode surface. The electrochemical sensor assembled with biosynthesized Au nanoparticles provides linear detection of nitrite between 0.01 and 3.8 mM. The sensor also has excellent immunity to interference. In addition, the proposed sensor was also successfully used for the detection of nitrite in drinking water.

The potential application of gold-apoferritin nanocages conjugated with 2-amino-2-deoxy-glucose for imaging of breast cancer cells

Development of biocompatible and multifunctional nanoprobes for tumor targeting, imaging, and therapy still remains a great challenge. Herein, gold nanoparticles (AuNPs) were synthesized in the cavity of horse spleen apoferritin protein (HoSAF) and protein surface was labeled with 2-amino-2-deoxy-glucose (2DG) as a cell surface glucose transport protein specific targeting probe to study the feasibility of its usage as a computer tomography (CT) contrast agent with tumor targeting capability through in vitro experiments. 2DG conjugated and gold-loaded apoferritin (Au-HoSAF-2DG) nanoparticles (NPs) showed selective targeting for human breast adenocarcinoma (MCF-7) cells when compared to normal breast (MCF-10A) cells. This AuNP-based imaging agent was found to be non-cytotoxic in a given concentration range with an apoptotic effect upon longer exposure times towards MCF-7 cells, while MCF-10A cells were affected less. This selective cell death would also be useful for further cancer treatments with the ability of X-ray attenuation in in vitro X-ray and computed tomography (CT) imaging.

Fabrication of nanohybrids assisted by protein-based materials for catalytic applications

Protein units and architectures were applied as supports in the synthesis of metal and metal oxide nanoparticles for environmentally benign catalytic applications.

Design of a confined environment using protein cages and crystals for the development of biohybrid materials

There is growing interest in the design of protein assemblies for use in materials science and bionanotechnology. Protein assemblies, such as cages and crystalline protein structures, provide confined chemical environments that allow immobilization of metal complexes, nanomaterials, and proteins by metal coordination, assembly/disassembly reactions, genetic manipulation and crystallization methods. Protein assembly composites can be used to prepare hybrid materials with catalytic, magnetic and optical properties for cellular applications due to their high stability, solubility and biocompatibility. In this feature article, we focus on the recent development of ferritin as the most promising molecular template protein cage and in vivo and in vitro engineering of protein crystals as solid protein materials with functional properties.

Bottom-Up Synthesis and Sensor Applications of Biomimetic Nanostructures

The combination of nanotechnology, biology, and bioengineering greatly improved the developments of nanomaterials with unique functions and properties. Biomolecules as the nanoscale building blocks play very important roles for the final formation of functional nanostructures. Many kinds of novel nanostructures have been created by using the bioinspired self-assembly and subsequent binding with various nanoparticles. In this review, we summarized the studies on the fabrications and sensor applications of biomimetic nanostructures. The strategies for creating different bottom-up nanostructures by using biomolecules like DNA, protein, peptide, and virus, as well as microorganisms like bacteria and plant leaf are introduced. In addition, the potential applications of the synthesized biomimetic nanostructures for colorimetry, fluorescence, surface plasmon resonance, surface-enhanced Raman scattering, electrical resistance, electrochemistry, and quartz crystal microbalance sensors are presented. This review will promote the understanding of relationships between biomolecules/microorganisms and functional nanomaterials in one way, and in another way it will guide the design and synthesis of biomimetic nanomaterials with unique properties in the future.

Water-soluble host–guest system from β-cyclodextrin as a fluorescent sensor for aluminium ions: synthesis and sensing studies

In this paper, a simple small molecule (L) derived from 4-(diethylamino)-2-hydroxy-benzaldehyde and carbohydrazide has been synthesized, and a water-soluble host–guest system from β-cyclodextrin and L was obtained that exhibited characteristic fluorescence behavior toward Al³⁺.

Fungal biosynthesis of gold nanoparticles: mechanism and scale up

Gold nanoparticles (AuNPs) are a widespread research tool because of their oxidation resistance, biocompatibility and stability. Chemical methods for AuNP synthesis often produce toxic residues that raise environmental concern. On the other hand, the biological synthesis of AuNPs in viable microorganisms and their cell-free extracts is an environmentally friendly and low-cost process. In general, fungi tolerate higher metal concentrations than bacteria and secrete abundant extracellular redox proteins to reduce soluble metal ions to their insoluble form and eventually to nanocrystals. Fungi harbour untapped biological diversity and may provide novel metal reductases for metal detoxification and bioreduction. A thorough understanding of the biosynthetic mechanism of AuNPs in fungi is needed to reduce the time of biosynthesis and to scale up the AuNP production process. In this review, we describe the known mechanisms for AuNP biosynthesis in viable fungi and fungal protein extracts and discuss the most suitable bioreactors for industrial AuNP biosynthesis.