Fabrication and characterization of an antibacterial chitosan-coated allantoin-loaded NaCMC/SA skin scaffold for wound healing applications

The field of tissue engineering has recently emerged as one of the most promising approaches to address the limitations of conventional tissue replacements for severe injuries. This study introduces a chitosan-coated porous skin scaffold based on sodium carboxymethyl cellulose (NaCMC) and sodium alginate (SA) hydrogels, incorporating allantoin (AL) as an antibacterial agent. The NaCMC/SA hydrogel was cross-linked with epichlorohydrin (ECH) and freeze-dried to obtain a three-dimensional porous structure. The coated and non-coated scaffolds underwent comprehensive evaluation and characterization through various in-vitro analyses, including SEM imaging, swelling, degradation, and mechanical assessments. Furthermore, the scaffolds were studied regarding their allantoin (AL) release profiles, antibacterial properties, cell viability, and cell adhesion. The in-vitro analyses revealed that adding a chitosan (CS) coating and allantoin (AL) to the NaCMC/SA hydrogel significantly improved the scaffolds' antibacterial properties and cell viability. It was observed that the NaCMC:SA ratio and ECH concentration influenced the swelling capacity, biodegradation, drug release profile, and mechanical properties of the scaffolds. Samples with higher NaCMC content exhibited enhanced swelling capacity, more controlled allantoin (AL) release, and improved mechanical strength. Furthermore, the in-vivo results demonstrated that the proposed skin scaffold exhibited satisfactory biocompatibility and supported cell viability during wound healing in Wistar rats, highlighting its potential for clinical applications.

Sustainable functionalized chitosan based nano-composites for wound dressings applications: A review

Functionalized chitosan nanocomposites have been studied for wound dressing applications due to their excellent antibacterial and anti-fungal properties. Polysaccharides show excellent antibacterial and drug-release properties and can be utilized for wound healing. In this article, we comprise distinct approaches for chitosan functionalization, such as photosensitizers, dendrimers, graft copolymerization, quaternization, acylation, carboxyalkylation, phosphorylation, sulfation, and thiolation. The current review article has also discussed brief insights on chitosan nanoparticle processing for biomedical applications, including wound dressings. The chitosan nanoparticle preparation technologies have been discussed, focusing on wound dressings owing to their targeted and controlled drug release behavior. The future directions of chitosan research include; a) finding an effective solution for chronic wounds, which are unable to heal completely; b) providing effective wound healing solutions for diabetic wounds and venous leg ulcers; c) to better understanding the wound healing mechanism with such materials which can help provide the optimum solution for wound dressing; d) to provide an improved treatment option for wound healing.

Operando surface optical nanometrology reveals diazonium salts' visible photografting mechanism

High resolution and quantitative surface modification through photografting is a highly desirable strategy towards the preparation of smart surfaces, enabling chemical functions to be precisely located onto specific regions of inert surfaces. Although promising, the mechanisms leading to direct (without the use of any additive) photoactivation of diazonium salts using visible wavelengths are poorly understood, precluding the generalization of popular diazonium-based electrografting strategies into high resolution photografting ones. In this paper, we employ quantitative phase imaging as a nanometrology tool for evaluating the local grafting rate with diffraction-limited resolution and nanometric precision. By carefully measuring the surface modification kinetics under a range of different conditions, we reveal the reaction mechanism while evaluating the influence of key parameters, such as the power density, the radical precursor concentration and the presence of side reactions.

Chitosan: A review of molecular structure, bioactivities and interactions with the human body and micro-organisms

Chitosan has many desirable attributes e.g. antimicrobial properties and promoting wound healing, and is used in various applications. This article first discusses how degree of deacetylation (DD) and molecular weight (MW) impacts on what level of bioactivities chitosan manifests, then introduces the "molecular chain configuration" model to explain various possible mechanisms of antimicrobial interactions between chitosan with different MW and different types of bacteria. Similarly, the possible pathways of how chitosan reacts with cancer and the body's immune system to demonstrate immune and antitumor effects are also discussed by using this model. Moreover, the possible mechanisms of how chitosan enhances coagulation and wound healing are also discussed. With these beneficial bioactivities in mind, the application of chitosan in surgery, tissue engineering and oncology is outlined. This review concludes that as chitosan demonstrates many beneficial bioactivities via multiple mechanisms, it is an important polymer with a promising future in medicine.

Graphene Oxide-Based Stimuli-Responsive Platforms for Biomedical Applications

Graphene is a two-dimensional sp2 hybridized carbon material that has attracted tremendous attention for its stimuli-responsive applications, owing to its high surface area and excellent electrical, optical, thermal, and mechanical properties. The physicochemical properties of graphene can be tuned by surface functionalization. The biomedical field pays special attention to stimuli-responsive materials due to their responsive abilities under different conditions. Stimuli-responsive materials exhibit great potential in changing their behavior upon exposure to external or internal factors, such as pH, light, electric field, magnetic field, and temperature. Graphene-based materials, particularly graphene oxide (GO), have been widely used in stimuli-responsive applications due to their superior biocompatibility compared to other forms of graphene. GO has been commonly utilized in tissue engineering, bioimaging, biosensing, cancer therapy, and drug delivery. GO-based stimuli-responsive platforms for wound healing applications have not yet been fully explored. This review describes the effects of different stimuli-responsive factors, such as pH, light, temperature, and magnetic and electric fields on GO-based materials and their applications. The wound healing applications of GO-based materials is extensively discussed with cancer therapy and drug delivery.

A reusable single-cell patterning strategy based on an ultrathin metal microstencil

The ability to arrange distinct cells in specific, predefined patterns at single-cell resolution can have broad applications in cell-based assays and play an important role in facilitating interdisciplinary research for researchers in various fields. However, most existing methods for single-cell patterning are based on the complicated lithography-based microfabrication process, and require professional skills. Thus, exploiting convenient and universal strategies of single-cell preparation while maintaining high-throughput single-cell patterning remains a challenge. Here, we describe a simple approach for rapid and high-efficiency single-cell patterning using an ultrathin metal microstencil (UTmS) and common tools available in any laboratory. In this work, ultrathin steel microstencil plates with only 5 μm thickness could be fabricated with laser drilling and achieve single-cell prototyping on an arbitrary planar substrate under gravity-induced natural sedimentation without requiring additional fixation, reaction pools, and centrifugation procedures. In this method, the UTmS is reusable and single-cell occupancy could easily reach approximately 88% within 30 min on fibronectin-modified substrates under gravity-induced natural sedimentation, and no significant effect on cell viability was observed. To verify this method, the real-time and heterogeneous study of calcium release and apoptosis behaviors of single cells was carried out based on this new strategy. To our knowledge, it is the first time that a UTmS with 5 μm thickness is directly applied to facilitate the micropatterning of high-resolution single cells, which is valuable for researchers in different fields owing to its user-friendly operation.

Multifunctional bioactive chitosan/cellulose nanocrystal scaffolds eradicate bacterial growth and sustain drug delivery

Chitosan-based hydrogels have received significant interest in tissue engineering and regenerative medicine applications owing to their superior biocompatibility. However, their applications are restricted owing to their weak mechanical strength. Cellulose nanocrystals (CNCs) are often explored as reinforcing agents to improve the native properties of polymers owing to their superior physicochemical properties. We fabricated a multi-functional hydrogel scaffold of chitosan/CNCs by incorporating different amounts of CNCs into a chitosan (CH) hydrogel. Significant enhancement in the mechanical strength was noted in the CH/CNCs as compared to that in pure CH hydrogel scaffolds. The cytocompatibility of the fabricated scaffolds was monitored in the presence of bone-marrow-derived mesenchymal stem cells (BMSCs). Improved cell viability and mineralization were observed with CH/CNC hydrogel scaffolds than those with pure CH hydrogel scaffolds. Enhanced osteogenic-related gene expression was observed in the CH/CNC hydrogel scaffold environment than that in the control, indicating their osteogenic potential, in addition to enhanced antibacterial activity. Developed composite scaffolds exhibited improved sustained drug release compared to that by pure polymer scaffolds, and this was more sustained in the scaffolds with higher CNC content. Therefore, the fabricated scaffolds may have been used in tissue engineering for osteogenesis, as antibacterial agents, and in sustained drug delivery.

Chitosan: A review of sources and preparation methods

Chitosan, derived from chitin, has many desirable biomedical attributes. This review aims to explore different sources of chitin and methods of chitosan production with industrial consideration. This article first discussed different sources of chitin for industrial scale production, with considerations given to both their environmental impacts and commercialization potential. Secondly, this article reviews the two categories of chitosan preparation - chemical methods and biological methods - based on existing publications which used lobster by-products as a feedstock source. The mechanisms of the chemical methods are firstly summarized, and then the different chemical agents and reaction parameters used are discussed. Next, both enzymatic and fermentation-based approaches are reviewed under biological methods and compared with chemical methodologies, with lactic fermentation methods as the major focus. This article concludes that lobster cephalothorax could be an ideal source for chitosan preparation on an industrial scale; and chemical methods involve simpler processing overall, while producing chitosan with stronger bioactivities because of the lower molecular weight (MW) and higher degree of deacetylation (DD) achieved by the products. Moreover, due to biological methods inevitably necessitating further chemical processing, an approach involving some unconventional chemical methods has been regarded as a more suitable strategy for industrial scale chitosan production.

Natural-Based Biomaterials for Peripheral Nerve Injury Repair

Peripheral nerve injury treatment is a relevant problem because of nerve lesion high incidence and because of unsatisfactory regeneration after severe injuries, thus resulting in a reduced patient's life quality. To repair severe nerve injuries characterized by substance loss and to improve the regeneration outcome at both motor and sensory level, different strategies have been investigated. Although autograft remains the gold standard technique, a growing number of research articles concerning nerve conduit use has been reported in the last years. Nerve conduits aim to overcome autograft disadvantages, but they must satisfy some requirements to be suitable for nerve repair. A universal ideal conduit does not exist, since conduit properties have to be evaluated case by case; nevertheless, because of their high biocompatibility and biodegradability, natural-based biomaterials have great potentiality to be used to produce nerve guides. Although they share many characteristics with synthetic biomaterials, natural-based biomaterials should also be preferable because of their extraction sources; indeed, these biomaterials are obtained from different renewable sources or food waste, thus reducing environmental impact and enhancing sustainability in comparison to synthetic ones. This review reports the strengths and weaknesses of natural-based biomaterials used for manufacturing peripheral nerve conduits, analyzing the interactions between natural-based biomaterials and biological environment. Particular attention was paid to the description of the preclinical outcome of nerve regeneration in injury repaired with the different natural-based conduits.

Surface hemocompatible modification of polysulfone membrane via covalently grafting acrylic acid and sulfonated hydroxypropyl chitosan

In this study, acrylic acid (AA) and sulfonated hydroxypropyl chitosan (SHPCS) were covalently grafted on the PSf membrane surface to improve its hemocompatibility.

Inkjet-Printing Patterned Chip on Sticky Superhydrophobic Surface for High-Efficiency Single-Cell Array Trapping and Real-Time Observation of Cellular Apoptosis

Single-cell assays have broad applications in cellular studies, tissue engineering, fundamental studies of cell-cell interactions, and understanding of cell-to-cell variations. Most existing methods for micron-sized cell patterning are still based on lithography-based microfabrication process. Thus, exploiting new mask-free strategies while maintaining high-precision single-cell patterning is still a great challenge. Here, we presented a facile, low-cost, and mask-free approach for constructing high-resolution patterning on sticky superhydrophobic (SH) substrates based on inkjet printing with ordinary precision. In this work, the SH surface with both high contact angle and relatively high contact angle hysteresis can not only obtain high-resolution spots but also avoid droplets bouncing behavior. We improved the feature size of printed protein spots as small as 4 μm, which is much smaller than protein spots used for single-cell trapping. Moreover, with the assistance of a narrow microchannel, the inkjet-printing patterned chip with fibronectin ink allows for fast and high-efficiency trapping of multiple single-cell arrays. Using this method, single-cell occupancy could reach approximately 81% within 30 min on subcellular-sized patterning chip, and there was no significant effect on cell viability. As a proof of concept, this chip has been applied to study the real-time apoptosis of single cells and demonstrated the potential in cells' heterogeneity analysis.

Chitosan Biomaterials for Current and Potential Dental Applications

Chitosan (CHS) is a very versatile natural biomaterial that has been explored for a range of bio-dental applications. CHS has numerous favourable properties such as biocompatibility, hydrophilicity, biodegradability, and a broad antibacterial spectrum (covering gram-negative and gram-positive bacteria as well as fungi). In addition, the molecular structure boasts reactive functional groups that provide numerous reaction sites and opportunities for forging electrochemical relationships at the cellular and molecular levels. The unique properties of CHS have attracted materials scientists around the globe to explore it for bio-dental applications. This review aims to highlight and discuss the hype around the development of novel chitosan biomaterials. Utilizing chitosan as a critical additive for the modification and improvement of existing dental materials has also been discussed.

Nanosized Building Blocks for Customizing Novel Antibiofilm Approaches

Recent advances in nanotechnology provide unparalleled flexibility to control the composition, size, shape, surface chemistry, and functionality of materials. Currently available engineering approaches allow precise synthesis of nanocompounds (e.g., nanoparticles, nanostructures, nanocrystals) with both top-down and bottom-up design principles at the submicron level. In this context, these "nanoelements" (NEs) or "nanosized building blocks" can 1) generate new nanocomposites with antibiofilm properties or 2) be used to coat existing surfaces (e.g., teeth) and exogenously introduced surfaces (e.g., restorative or implant materials) for prevention of bacterial adhesion and biofilm formation. Furthermore, functionalized NEs 3) can be conceived as nanoparticles to carry and selectively release antimicrobial agents after attachment or within oral biofilms, resulting in their disruption. The latter mechanism includes "smart release" of agents when triggered by pathogenic microenvironments (e.g., acidic pH or low oxygen levels) for localized and controlled drug delivery to simultaneously kill bacteria and dismantle the biofilm matrix. Here we discuss inorganic, metallic, polymeric, and carbon-based NEs for their outstanding chemical flexibility, stability, and antibiofilm properties manifested when converted into bioactive materials, assembled on-site or delivered at biofilm-surface interfaces. Details are provided on the emerging concept of the rational design of NEs and recent technological breakthroughs for the development of a new generation of nanocoatings or functional nanoparticles for biofilm control in the oral cavity.

Magneto-chemotherapy for cervical cancer treatment with camptothecin loaded Fe3O4 functionalized β-cyclodextrin nanovehicle

We portray a novel way to synthesis of iron oxide magnetic nanoparticle incorporated β-cyclodextrin (β-CD) nanocarrier stabilized by ethylenediamine tetra acetic acid (EDTA) obtaining remarkable biocompatibility and biodegradability.

Osteogenic differentiation of preosteoblasts on a hemostatic gelatin sponge

Bone tissue engineering provides many advantages for repairing skeletal defects. Although many different kinds of biomaterials have been used for bone tissue engineering, safety issues must be considered when using them in a clinical setting. In this study, we examined the effects of using a common clinical item, a hemostatic gelatin sponge, as a scaffold for bone tissue engineering. The use of such a clinically acceptable item may hasten the translational lag from laboratory to clinical studies. We performed both degradation and biocompatibility studies on the hemostatic gelatin sponge, and cultured preosteoblasts within the sponge scaffold to demonstrate its osteogenic differentiation potential. In degradation assays, the gelatin sponge demonstrated good stability after being immersed in PBS for 8 weeks (losing only about 10% of its net weight and about 54% decrease of mechanical strength), but pepsin and collagenases readily biodegraded it. The gelatin sponge demonstrated good biocompatibility to preosteoblasts as demonstrated by MTT assay, confocal microscopy, and scanning electron microscopy. Furthermore, osteogenic differentiation and the migration of preosteoblasts, elevated alkaline phosphatase activity, and in vitro mineralization were observed within the scaffold structure. Each of these results indicates that the hemostatic gelatin sponge is a suitable scaffold for bone tissue engineering.

Probing neural cell behaviors through micro-/nano-patterned chitosan substrates

In this study, we describe the development of surface-modified chitosan substrates to examine topographically related Neuro-2a cell behaviors. Different functional groups can be modified on chitosan surfaces to probe Neuro-2a cell morphology. To prepare chitosan substrates with micro/nano-scaled features, we demonstrated an easy-to-handle method that combined photolithography, inductively coupled plasma reactive ion etching, Ag nanoparticle-assisted etching, and solution casting. The results show that Neuro-2a cells preferred to adhere to a flat chitosan surface rather than a nanotextured chitosan surface as evidenced by greater immobilization and differentiation, suggesting that surface topography is crucial for neural patterning. In addition, we developed chitosan substrates with different geometric patterns and flat region depth; this allowed us to re-arrange or re-pattern Neuro-2a cell colonies at desired locations. We found that a polarity-induced micropattern provided the most suitable surface pattern for promoting neural network formation on a chitosan substrate. The cellular polarity of single Neuro-2a cell spreading correlated to a diamond-like geometry and neurite outgrowth was induced from the corners toward the grooves of the structures. This study provide greater insight into neurobiology, including neurotransmitter screening, electrophysiological stimulation platforms, and biomedical engineering.

Wax-Impregnated Cotton Fabrics as Cell Culture Platform

Microwell plates are widely used in various cell-based assay and drug screening. Usually these plates are made from non-biodegradable materials such as polystyrene or polyethylene. In this report, we propose the use of wax-impregnated cotton fabrics as an alternative microwell plate that is easy to fabricate, simple to use, sustainable and environmentally friendlier. Several researchers recently used soft lithography and photolithography technique to fabricate various cell culture platforms. Our proposed method consists instead of simple dipping and drying process. The platform is made of a series of fabrics being stacked and held together with various wax formulations. With the exception of the base layer, each fabric layer has a circular hole opening with increasing diameter towards the top layer; thereby forming a well where cells are cultured at its flat bottom. We characterized the chemical and physical properties of the platform surface which affect cells attachment and proliferation. These properties include the surface chemistry, hydrophobicity and roughness. We cultured human skin fibroblast (HSF 1184 Cell Line) on the platform as our preliminary proof of concept. We observed proliferation of the cells after 24 hours. The result indicates the potential use of the platform for future cell-based assay applications.

Probing cellular behaviors through nanopatterned chitosan membranes

This paper describes a high-throughput method for developing physically modified chitosan membranes to probe the cellular behavior of MDCK epithelial cells and HIG-82 fibroblasts adhered onto these modified membranes. To prepare chitosan membranes with micro/nanoscaled features, we have demonstrated an easy-to-handle, facile approach that could be easily integrated with IC-based manufacturing processes with mass production potential. These physically modified chitosan membranes were observed by scanning electron microscopy to gain a better understanding of chitosan membrane surface morphology. After MDCK cells and HIG-82 fibroblasts were cultured on these modified chitosan membranes for various culture durations (i.e. 1, 2, 4, 12 and 24 h), they were investigated to decipher cellular behavior. We found that both cells preferred to adhere onto a flat surface rather than on a nanopatterned surface. However, most (> 80%) of the MDCK cells showed rounded morphology and would suspend in the cultured medium instead of adhering onto the planar surface of negatively nanopatterned chitosan membranes. This means different cell types (e.g. fibroblasts versus epithelia) showed distinct capabilities/preferences of adherence for materials of varying surface roughness. We also showed that chitosan membranes could be re-used at least nine times without significant contamination and would provide us consistency for probing cell-material interactions by permitting reuse of the same substrate. We believe these results would provide us better insight into cellular behavior, specifically, microscopic properties and characteristics of cells grown under unique, nanopatterned cell-interface conditions.